* [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash @ 2025-07-25 6:16 Alexander Stein 2025-07-25 6:16 ` [PATCH 2/2] ARM: dts: ls1021a-tqmals1021a-mbsl1021a: Remove superfluous compatible Alexander Stein 2025-08-22 3:22 ` [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash Shawn Guo 0 siblings, 2 replies; 3+ messages in thread From: Alexander Stein @ 2025-07-25 6:16 UTC (permalink / raw) To: Shawn Guo, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Alexander Stein, linux-arm-kernel, devicetree, linux-kernel The jedec SPI-NOR flash node itself has no partitions, but the partitions subnode. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi index 271001eb5ad7f..167559521ae10 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi @@ -66,8 +66,6 @@ &qspi { qflash0: flash@0 { compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; spi-max-frequency = <20000000>; spi-rx-bus-width = <4>; spi-tx-bus-width = <4>; -- 2.43.0 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 2/2] ARM: dts: ls1021a-tqmals1021a-mbsl1021a: Remove superfluous compatible 2025-07-25 6:16 [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash Alexander Stein @ 2025-07-25 6:16 ` Alexander Stein 2025-08-22 3:22 ` [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash Shawn Guo 1 sibling, 0 replies; 3+ messages in thread From: Alexander Stein @ 2025-07-25 6:16 UTC (permalink / raw) To: Shawn Guo, Rob Herring, Krzysztof Kozlowski, Conor Dooley Cc: Alexander Stein, linux-arm-kernel, devicetree, linux-kernel The touchscreen compatible in the overlays has one extra entry. Remove it to fix the dtbs_check warning: touchscreen@38 (edt,edt-ft5406): compatible: ['edt,edt-ft5406', 'edt,edt-ft5x06'] is too long Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> --- .../nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso | 2 +- .../nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso index 146d45601f693..66cedc2dcd965 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso @@ -36,7 +36,7 @@ &i2c0 { #size-cells = <0>; polytouch: touchscreen@38 { - compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&pca9554_0>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso index db66831f31af9..8b9455bffbd26 100644 --- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso +++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso @@ -36,7 +36,7 @@ &i2c0 { #size-cells = <0>; polytouch: touchscreen@38 { - compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + compatible = "edt,edt-ft5406"; reg = <0x38>; interrupt-parent = <&pca9554_0>; interrupts = <6 IRQ_TYPE_EDGE_FALLING>; -- 2.43.0 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash 2025-07-25 6:16 [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash Alexander Stein 2025-07-25 6:16 ` [PATCH 2/2] ARM: dts: ls1021a-tqmals1021a-mbsl1021a: Remove superfluous compatible Alexander Stein @ 2025-08-22 3:22 ` Shawn Guo 1 sibling, 0 replies; 3+ messages in thread From: Shawn Guo @ 2025-08-22 3:22 UTC (permalink / raw) To: Alexander Stein Cc: Shawn Guo, Rob Herring, Krzysztof Kozlowski, Conor Dooley, linux-arm-kernel, devicetree, linux-kernel On Fri, Jul 25, 2025 at 08:16:31AM +0200, Alexander Stein wrote: > The jedec SPI-NOR flash node itself has no partitions, but the partitions > subnode. > > Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Applied both, thanks! ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2025-08-22 11:23 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2025-07-25 6:16 [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash Alexander Stein 2025-07-25 6:16 ` [PATCH 2/2] ARM: dts: ls1021a-tqmals1021a-mbsl1021a: Remove superfluous compatible Alexander Stein 2025-08-22 3:22 ` [PATCH 1/2] ARM: dts: ls1021a-tqmals1021a: Remove superfluous address and size cells for qflash Shawn Guo
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox