Re: [PATCH v3 1/6] dt-bindings: phy: ti,tcan104x-can: Document NXP TJA105X/1048

[Frank Li <Frank.li@nxp.com>]

On Fri, Aug 29, 2025 at 03:08:56PM +0800, Peng Fan wrote:
> The TJA105[1,7] is a high-speed CAN transceiver which is a pin-compatible
> alternative for TI TCAN1043 with sleep mode supported, and has a compatible
> programming model, therefore use ti,tcan1043 as fallback compatible.
>
> The TJA1048 is a dual high-speed CAN transceiver with sleep mode supported.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  .../devicetree/bindings/phy/ti,tcan104x-can.yaml   | 32 ++++++++++++++++++++--
>  1 file changed, 30 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> index 4a8c3829d85d3c4a4963750d03567c1c345beb91..a225540545301e443e3460b933effbad48786597 100644
> --- a/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> +++ b/Documentation/devicetree/bindings/phy/ti,tcan104x-can.yaml
> @@ -19,18 +19,25 @@ properties:
>            - enum:
>                - microchip,ata6561
>            - const: ti,tcan1042
> +      - items:
> +          - enum:
> +              - nxp,tja1051
> +              - nxp,tja1057
> +          - const: ti,tcan1043
>        - enum:
>            - ti,tcan1042
>            - ti,tcan1043
> +          - nxp,tja1048
>            - nxp,tjr1443
>
>    '#phy-cells':
> -    const: 0
> +    enum: [0, 1]
>
>    standby-gpios:
>      description:
>        gpio node to toggle standby signal on transceiver
> -    maxItems: 1
> +    minItems: 1
> +    maxItems: 2
>
>    enable-gpios:
>      description:
> @@ -53,6 +60,27 @@ required:
>    - compatible
>    - '#phy-cells'
>
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: nxp,tja1048
> +    then:
> +      properties:
> +        '#phy-cells':
> +          const: 1
> +        standby-gpios:
> +          minItems: 2
> +          maxItems: 2

maxItems already 2 at top.

> +    else:
> +      properties:
> +        '#phy-cells':
> +          const: 0
> +        standby-gpios:
> +          minItems: 1

minItems already 1 at top

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> +          maxItems: 1
> +
>  additionalProperties: false
>
>  examples:
>
> --
> 2.37.1
>