[PATCH v2 0/7] various imx8m*-venice dt fixes

[PATCH v2 0/7] various imx8m*-venice dt fixes

[Tim Harvey]

This series contains various imx8m*-venice board dt fixes.

v2:
 - add additional info to commit explaining changing TXC slew rate for
   improved signal quality and emiisions (Peng)
 - add tags

Tim Harvey (7):
  arm64: dts: freescale: imx8mp-venice-gw7905-2x: remove duplicate
    usdhc1 props
  arm64: dts: imx8m{m,n,p}-venice: disable unused clk output for TI PHY
  arm64: dts: imx8mp-venice-gw702x: reduce RGMII CLK drive strength
  arm64: dts: imx8mm-venice-gw700x: reduce RGMII CLK drive strength
  arm64: dts: imx8mm-venice-gw72xx: remove unused sdhc1 pinctrl
  arm64: dts: imx8mp-venice-gw702x: remove off-board uart
  arm64: dts: imx8mp-venice-gw702x: remove off-board sdhc1

 .../dts/freescale/imx8mm-venice-gw700x.dtsi   |  3 +-
 .../dts/freescale/imx8mm-venice-gw72xx.dtsi   | 11 ----
 .../dts/freescale/imx8mm-venice-gw7902.dts    |  1 +
 .../dts/freescale/imx8mn-venice-gw7902.dts    |  1 +
 .../dts/freescale/imx8mp-venice-gw702x.dtsi   | 54 +------------------
 .../dts/freescale/imx8mp-venice-gw72xx.dtsi   | 11 ----
 .../dts/freescale/imx8mp-venice-gw74xx.dts    |  1 +
 7 files changed, 7 insertions(+), 75 deletions(-)

-- 
2.25.1

[PATCH v2 1/7] arm64: dts: freescale: imx8mp-venice-gw7905-2x: remove duplicate usdhc1 props

[Tim Harvey]

Remove the un-intended duplicate properties from usdhc1.

Fixes: 0d5b288c2110e ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
v2:
 - add tags
---
 arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index cbf0c9a740fa..303995a8adce 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -423,9 +423,6 @@ &usdhc1 {
 	bus-width = <4>;
 	non-removable;
 	status = "okay";
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
 };
 
 /* eMMC */
-- 
2.25.1

[PATCH v2 2/7] arm64: dts: imx8m{m,n,p}-venice: disable unused clk output for TI PHY

[Tim Harvey]

Disable the unused refclk output for the TI DP83867 PHY used on
Gateworks Venice boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
v2:
 - add tags
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 1 +
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts  | 1 +
 arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts  | 1 +
 arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi | 1 +
 arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts  | 1 +
 5 files changed, 5 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 37db4f0dd505..baf46fe28133 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -115,6 +115,7 @@ mdio {
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
index c09b40fc6dec..468c7e993c52 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts
@@ -253,6 +253,7 @@ mdio {
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
index a5f52f60169e..5aa0e2cd155e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts
@@ -248,6 +248,7 @@ mdio {
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index 303995a8adce..a1232a4f8485 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -101,6 +101,7 @@ ethphy0: ethernet-phy@0 {
 			reg = <0x0>;
 			interrupt-parent = <&gpio3>;
 			interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index 12de7cf1e853..7662663ff5da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -228,6 +228,7 @@ mdio {
 		ethphy0: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x0>;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
 			tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-- 
2.25.1

[PATCH v2 3/7] arm64: dts: imx8mp-venice-gw702x: reduce RGMII CLK drive strength

[Tim Harvey]

The i.MX8M Plus EQOS RGMII tracelength is less than 1in and does not
require a x6 drive strength. Reduce the CLK drive strength to x1 for
lower emissions. Additionally since TXC is not a high frequency clock,
use slow slew rate (FSEL=0) for lower emmissions and improved signal
quality.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v2: add FSEL detail to log (Peng)
---
 arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index a1232a4f8485..dd9eeb3479fd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -462,7 +462,7 @@ MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x16
 			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x16
 			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x16
 			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x16
-			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x0
 		>;
 	};
 
-- 
2.25.1

Re: [PATCH v2 3/7] arm64: dts: imx8mp-venice-gw702x: reduce RGMII CLK drive strength

[Peng Fan]

On Thu, Sep 18, 2025 at 08:44:47AM -0700, Tim Harvey wrote:
>The i.MX8M Plus EQOS RGMII tracelength is less than 1in and does not
>require a x6 drive strength. Reduce the CLK drive strength to x1 for
>lower emissions. Additionally since TXC is not a high frequency clock,
>use slow slew rate (FSEL=0) for lower emmissions and improved signal
>quality.
>
>Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

[PATCH v2 4/7] arm64: dts: imx8mm-venice-gw700x: reduce RGMII CLK drive strength

[Tim Harvey]

The i.MX8M Mini FEC RGMII tracelength is less than 1in and does not
require a x6 drive strength. Reduce the CLK drive strength to x1 for
lower emissions. Additionally since TXC is not a high frequency clock,
use slow slew rate (FSEL=0) for lower emmissions and improved signal
quality.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v2: add FSEL detail to log (Peng)
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index baf46fe28133..dca213c85cc3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -446,7 +446,7 @@ MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3		0x91
 			MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2		0x91
 			MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1		0x91
 			MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0		0x91
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x0
 			MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-- 
2.25.1

Re: [PATCH v2 4/7] arm64: dts: imx8mm-venice-gw700x: reduce RGMII CLK drive strength

[Peng Fan]

On Thu, Sep 18, 2025 at 08:44:48AM -0700, Tim Harvey wrote:
>The i.MX8M Mini FEC RGMII tracelength is less than 1in and does not
>require a x6 drive strength. Reduce the CLK drive strength to x1 for
>lower emissions. Additionally since TXC is not a high frequency clock,
>use slow slew rate (FSEL=0) for lower emmissions and improved signal
>quality.
>
>Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

[PATCH v2 5/7] arm64: dts: imx8mm-venice-gw72xx: remove unused sdhc1 pinctrl

[Tim Harvey]

The SDHC1 interface is not used on the imx8mm-venice-gw72xx. Remove the
unused pinctrl_usdhc1 iomux node.

Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
v2:
 - add tags
---
 .../boot/dts/freescale/imx8mm-venice-gw72xx.dtsi      | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 752caa38eb03..266038fbbef9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -351,17 +351,6 @@ MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX	0x140
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
-			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
-			MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
-			MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
-			MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
-			MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
-- 
2.25.1

[PATCH v2 6/7] arm64: dts: imx8mp-venice-gw702x: remove off-board uart

[Tim Harvey]

UART1 and UART3 go to a connector for use on a baseboard and as such are
defined in the baseboard device-trees. Remove them from the gw702x SOM
device-tree.

Fixes: 0d5b288c2110 ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
---
v2:
 - add tags
---
 .../dts/freescale/imx8mp-venice-gw702x.dtsi   | 28 -------------------
 1 file changed, 28 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index dd9eeb3479fd..dba35b3394bc 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -396,13 +396,6 @@ &i2c3 {
 	status = "okay";
 };
 
-/* off-board header */
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1>;
-	status = "okay";
-};
-
 /* console */
 &uart2 {
 	pinctrl-names = "default";
@@ -410,13 +403,6 @@ &uart2 {
 	status = "okay";
 };
 
-/* off-board header */
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart3>;
-	status = "okay";
-};
-
 /* off-board */
 &usdhc1 {
 	pinctrl-names = "default";
@@ -521,13 +507,6 @@ MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19	0x400001c2
 		>;
 	};
 
-	pinctrl_uart1: uart1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
-			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
-		>;
-	};
-
 	pinctrl_uart2: uart2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
@@ -535,13 +514,6 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
 		>;
 	};
 
-	pinctrl_uart3: uart3grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX	0x140
-			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX	0x140
-		>;
-	};
-
 	pinctrl_usdhc1: usdhc1grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-- 
2.25.1

[PATCH v2 7/7] arm64: dts: imx8mp-venice-gw702x: remove off-board sdhc1

[Tim Harvey]

SDHC1 on the GW702x SOM routes to a connector for use on a baseboard
and as such are defined in the baseboard device-trees.

Remove it from the gw702x SOM device-tree.

Fixes: 0d5b288c2110 ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v2:
 - no changes
---
 .../dts/freescale/imx8mp-venice-gw702x.dtsi   | 20 -------------------
 .../dts/freescale/imx8mp-venice-gw72xx.dtsi   | 11 ----------
 2 files changed, 31 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
index dba35b3394bc..de852ebff571 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
@@ -403,15 +403,6 @@ &uart2 {
 	status = "okay";
 };
 
-/* off-board */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc1>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-};
-
 /* eMMC */
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
@@ -514,17 +505,6 @@ MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
-			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
-			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
-			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
-			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
index cf747ec6fa16..76020ef89bf3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw72xx.dtsi
@@ -365,17 +365,6 @@ MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX	0x140
 		>;
 	};
 
-	pinctrl_usdhc1: usdhc1grp {
-		fsl,pins = <
-			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
-			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
-			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
-			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
-			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
-			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
-		>;
-	};
-
 	pinctrl_usdhc2: usdhc2grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
-- 
2.25.1

Re: [PATCH v2 7/7] arm64: dts: imx8mp-venice-gw702x: remove off-board sdhc1

[Peng Fan]

On Thu, Sep 18, 2025 at 08:44:51AM -0700, Tim Harvey wrote:
>SDHC1 on the GW702x SOM routes to a connector for use on a baseboard
>and as such are defined in the baseboard device-trees.
>
>Remove it from the gw702x SOM device-tree.
>
>Fixes: 0d5b288c2110 ("arm64: dts: freescale: Add imx8mp-venice-gw7905-2x")
>Signed-off-by: Tim Harvey <tharvey@gateworks.com>

Reviewed-by: Peng Fan <peng.fan@nxp.com>

Re: [PATCH v2 0/7] various imx8m*-venice dt fixes

[Shawn Guo]

On Thu, Sep 18, 2025 at 08:44:44AM -0700, Tim Harvey wrote:
> This series contains various imx8m*-venice board dt fixes.
> 
> v2:
>  - add additional info to commit explaining changing TXC slew rate for
>    improved signal quality and emiisions (Peng)
>  - add tags
> 
> Tim Harvey (7):
>   arm64: dts: freescale: imx8mp-venice-gw7905-2x: remove duplicate
>     usdhc1 props
>   arm64: dts: imx8m{m,n,p}-venice: disable unused clk output for TI PHY
>   arm64: dts: imx8mp-venice-gw702x: reduce RGMII CLK drive strength
>   arm64: dts: imx8mm-venice-gw700x: reduce RGMII CLK drive strength
>   arm64: dts: imx8mm-venice-gw72xx: remove unused sdhc1 pinctrl
>   arm64: dts: imx8mp-venice-gw702x: remove off-board uart
>   arm64: dts: imx8mp-venice-gw702x: remove off-board sdhc1

Applied all, thanks!