Re: [PATCH 1/4 v3] dt-bindings: PCI: s32g: Add NXP PCIe controller

[Frank Li <Frank.li@nxp.com>]

On Wed, Oct 22, 2025 at 07:43:06PM +0200, Vincent Guittot wrote:
> Describe the PCIe host controller available on the S32G platforms.
>
> Co-developed-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
> Signed-off-by: Ionut Vicovan <Ionut.Vicovan@nxp.com>
> Co-developed-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
> Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
> Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
> Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
> Co-developed-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
> Signed-off-by: Ghennadi Procopciuc <Ghennadi.Procopciuc@nxp.com>
> Co-developed-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
> Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@nxp.com>
> Co-developed-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
>  .../bindings/pci/nxp,s32g-pcie.yaml           | 102 ++++++++++++++++++
>  1 file changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
> new file mode 100644
> index 000000000000..2d8f7ad67651
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/nxp,s32g-pcie.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/nxp,s32g-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP S32G2xxx/S32G3xxx PCIe Root Complex controller
> +
> +maintainers:
> +  - Bogdan Hamciuc <bogdan.hamciuc@nxp.com>
> +  - Ionut Vicovan <ionut.vicovan@nxp.com>
> +
> +description:
> +  This PCIe controller is based on the Synopsys DesignWare PCIe IP.
> +  The S32G SoC family has two PCIe controllers, which can be configured as
> +  either Root Complex or Endpoint.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - nxp,s32g2-pcie
> +      - items:
> +          - const: nxp,s32g3-pcie
> +          - const: nxp,s32g2-pcie
> +
> +  reg:
> +    maxItems: 6
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: dbi2
> +      - const: atu
> +      - const: dma
> +      - const: ctrl
> +      - const: config
> +
> +  interrupts:
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: dma
> +      - const: msi

Most likely dma irq is optional irq, seldom use built-in edma in RC mode.
so put msi to the first.

interrupt-names:
  items:
    - const: msi
    - const: dma
  minItems: 1

missed phys

phys:
  maxItems: 1

Frank
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - interrupts
> +  - interrupt-names
> +  - ranges
> +  - phys
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/phy/phy.h>
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie@40400000 {
> +            compatible = "nxp,s32g3-pcie",
> +                         "nxp,s32g2-pcie";
> +            reg = <0x00 0x40400000 0x0 0x00001000>,   /* dbi registers */
> +                  <0x00 0x40420000 0x0 0x00001000>,   /* dbi2 registers */
> +                  <0x00 0x40460000 0x0 0x00001000>,   /* atu registers */
> +                  <0x00 0x40470000 0x0 0x00001000>,   /* dma registers */
> +                  <0x00 0x40481000 0x0 0x000000f8>,   /* ctrl registers */
> +                  <0x5f 0xffffe000 0x0 0x00002000>;  /* config space */
> +            reg-names = "dbi", "dbi2", "atu", "dma", "ctrl", "config";
> +            dma-coherent;
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            device_type = "pci";
> +            ranges =
> +                     <0x81000000 0x0 0x00000000 0x5f 0xfffe0000 0x0 0x00010000>,
> +                     <0x82000000 0x0 0x00000000 0x58 0x00000000 0x0 0x80000000>,
> +                     <0x82000000 0x1 0x00000000 0x59 0x00000000 0x6 0xfffe0000>;
> +
> +            bus-range = <0x0 0xff>;
> +            interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "dma", "msi";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0x7>;
> +            interrupt-map = <0 0 0 1 &gic 0 0 GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 2 &gic 0 0 GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 3 &gic 0 0 GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
> +                            <0 0 0 4 &gic 0 0 GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +
> +            phys = <&serdes0 PHY_TYPE_PCIE 0 0>;
> +        };
> +    };
> --
> 2.43.0
>