From: Frank Li <Frank.li@nxp.com>
To: Peng Fan <peng.fan@nxp.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
Daniel Baluta <daniel.baluta@nxp.com>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] remoteproc: imx_rproc: Add support for i.MX95
Date: Tue, 28 Oct 2025 12:22:02 -0400 [thread overview]
Message-ID: <aQDtqounSfCqPGek@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20251028-imx95-rproc-2025-10-28-v1-4-ce9e7db9edcb@nxp.com>
On Tue, Oct 28, 2025 at 04:18:04PM +0800, Peng Fan wrote:
> Add imx_rproc_cfg_imx95_m7 and address(TCM and DDR) mapping.
> Add i.MX95 of_device_id entry.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 8ecf95c81b598bbe38b721808878e5427339a08e..45eeb5d61d43c9ce72e840611e93af067a4296e7 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -74,6 +74,10 @@
>
> #define IMX_SC_IRQ_GROUP_REBOOTED 5
>
> +/* Must align with System Manager Firmware */
> +#define IMX95_M7_CPUID 1
> +#define IMX95_M7_LMID 1
> +
Only use once, you can put 1 to imx_rproc_cfg_imx95_m7
/* Must align with System Manager Firmware */
.cpuid = 1,
.lmid = 1,
Frank
> /**
> * struct imx_rproc_mem - slim internal memory structure
> * @cpu_addr: MPU virtual address of the memory region
> @@ -131,6 +135,18 @@ struct imx_rproc {
> u32 flags;
> };
>
> +static const struct imx_rproc_att imx_rproc_att_imx95_m7[] = {
> + /* dev addr , sys addr , size , flags */
> + /* TCM CODE NON-SECURE */
> + { 0x00000000, 0x203C0000, 0x00040000, ATT_OWN | ATT_IOMEM },
> +
> + /* TCM SYS NON-SECURE*/
> + { 0x20000000, 0x20400000, 0x00040000, ATT_OWN | ATT_IOMEM },
> +
> + /* DDR */
> + { 0x80000000, 0x80000000, 0x50000000, 0 },
> +};
> +
> static const struct imx_rproc_att imx_rproc_att_imx93[] = {
> /* dev addr , sys addr , size , flags */
> /* TCM CODE NON-SECURE */
> @@ -1440,6 +1456,14 @@ static const struct imx_rproc_dcfg imx_rproc_cfg_imx93 = {
> .flags = IMX_RPROC_NEED_CLKS,
> };
>
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx95_m7 = {
> + .att = imx_rproc_att_imx95_m7,
> + .att_size = ARRAY_SIZE(imx_rproc_att_imx95_m7),
> + .ops = &imx_rproc_ops_sm,
> + .cpuid = IMX95_M7_CPUID,
> + .lmid = IMX95_M7_LMID,
> +};
> +
> static const struct of_device_id imx_rproc_of_match[] = {
> { .compatible = "fsl,imx7ulp-cm4", .data = &imx_rproc_cfg_imx7ulp },
> { .compatible = "fsl,imx7d-cm4", .data = &imx_rproc_cfg_imx7d },
> @@ -1454,6 +1478,7 @@ static const struct of_device_id imx_rproc_of_match[] = {
> { .compatible = "fsl,imx8qm-cm4", .data = &imx_rproc_cfg_imx8qm },
> { .compatible = "fsl,imx8ulp-cm33", .data = &imx_rproc_cfg_imx8ulp },
> { .compatible = "fsl,imx93-cm33", .data = &imx_rproc_cfg_imx93 },
> + { .compatible = "fsl,imx95-cm7", .data = &imx_rproc_cfg_imx95_m7 },
> {},
> };
> MODULE_DEVICE_TABLE(of, imx_rproc_of_match);
>
> --
> 2.37.1
>
prev parent reply other threads:[~2025-10-28 16:22 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-10-28 8:18 [PATCH 0/4] remoteproc: imx_rproc: Support i.MX95 Peng Fan
2025-10-28 8:18 ` [PATCH 1/4] dt-bindings: remoteproc: fsl,imx-rproc: Add support for i.MX95 Peng Fan
2025-10-28 8:18 ` [PATCH 2/4] remoteproc: imx_rproc: Add runtime ops copy to support dynamic behavior Peng Fan
2025-10-28 15:58 ` Frank Li
2025-10-29 9:34 ` Daniel Baluta
2025-10-30 11:12 ` Peng Fan
2025-10-28 8:18 ` [PATCH 3/4] remoteproc: imx_rproc: Add support for System Manager API Peng Fan
2025-10-28 16:16 ` Frank Li
2025-10-29 3:52 ` Peng Fan
2025-10-28 8:18 ` [PATCH 4/4] remoteproc: imx_rproc: Add support for i.MX95 Peng Fan
2025-10-28 16:22 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aQDtqounSfCqPGek@lizhi-Precision-Tower-5810 \
--to=frank.li@nxp.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=peng.fan@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox