Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
Cc: Abel Vesa <abelvesa@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <festevam@gmail.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Daniel Baluta <daniel.baluta@nxp.com>,
	Shengjiu Wang <shengjiu.wang@nxp.com>,
	linux-clk@vger.kernel.org, imx@lists.linux.dev,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH v4 5/8] reset: imx8mp-audiomix: Switch to using regmap API
Date: Tue, 4 Nov 2025 11:44:54 -0500	[thread overview]
Message-ID: <aQothuvsclJoP74u@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20251104120301.913-6-laurentiumihalcea111@gmail.com>

On Tue, Nov 04, 2025 at 04:02:58AM -0800, Laurentiu Mihalcea wrote:
> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
> Switch to using the regmap API to allow performing register operations
> under the same lock. This is needed for cases such as i.MX8ULP's SIM LPAV
> where clock gating, reset control and MUX-ing is performed via the same
> register (i.e. SYSCTRL0) and different subsystem APIs.
>
> Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> ---
>  drivers/reset/reset-imx8mp-audiomix.c | 93 +++++++++++++++++----------
>  1 file changed, 58 insertions(+), 35 deletions(-)
>
> diff --git a/drivers/reset/reset-imx8mp-audiomix.c b/drivers/reset/reset-imx8mp-audiomix.c
> index e9643365a62c..18a7f68aa59f 100644
> --- a/drivers/reset/reset-imx8mp-audiomix.c
> +++ b/drivers/reset/reset-imx8mp-audiomix.c
> @@ -11,6 +11,7 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> +#include <linux/regmap.h>
>  #include <linux/reset-controller.h>
>
>  #define IMX8MP_AUDIOMIX_EARC_RESET_OFFSET	0x200
> @@ -42,8 +43,7 @@ static const struct imx8mp_reset_map reset_map[] = {
>
>  struct imx8mp_audiomix_reset {
>  	struct reset_controller_dev rcdev;
> -	spinlock_t lock; /* protect register read-modify-write cycle */
> -	void __iomem *base;
> +	struct regmap *regmap;
>  };
>
>  static struct imx8mp_audiomix_reset *to_imx8mp_audiomix_reset(struct reset_controller_dev *rcdev)
> @@ -55,26 +55,15 @@ static int imx8mp_audiomix_update(struct reset_controller_dev *rcdev,
>  				  unsigned long id, bool assert)
>  {
>  	struct imx8mp_audiomix_reset *priv = to_imx8mp_audiomix_reset(rcdev);
> -	void __iomem *reg_addr = priv->base;
> -	unsigned int mask, offset, active_low;
> -	unsigned long reg, flags;
> +	unsigned int mask, offset, active_low, shift, val;
>
>  	mask = reset_map[id].mask;
>  	offset = reset_map[id].offset;
>  	active_low = reset_map[id].active_low;
> +	shift = ffs(mask) - 1;
> +	val = (active_low ^ assert) << shift;
>
> -	spin_lock_irqsave(&priv->lock, flags);
> -
> -	reg = readl(reg_addr + offset);
> -	if (active_low ^ assert)
> -		reg |= mask;
> -	else
> -		reg &= ~mask;
> -	writel(reg, reg_addr + offset);
> -
> -	spin_unlock_irqrestore(&priv->lock, flags);
> -
> -	return 0;
> +	return regmap_update_bits(priv->regmap, offset, mask, val);
>  }
>
>  static int imx8mp_audiomix_reset_assert(struct reset_controller_dev *rcdev,
> @@ -94,6 +83,52 @@ static const struct reset_control_ops imx8mp_audiomix_reset_ops = {
>  	.deassert = imx8mp_audiomix_reset_deassert,
>  };
>
> +static const struct regmap_config regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +};
> +
> +/* assumption: registered only if not using parent regmap */
> +static void imx8mp_audiomix_reset_iounmap(void *data)
> +{
> +	void __iomem *base = (void __iomem *)data;
> +
> +	iounmap(base);
> +}
> +
> +static int imx8mp_audiomix_reset_get_regmap(struct imx8mp_audiomix_reset *priv)
> +{
> +	void __iomem *base;
> +	struct device *dev;
> +	int ret;
> +
> +	dev = priv->rcdev.dev;
> +
> +	/* try to use the parent's regmap */
> +	priv->regmap = dev_get_regmap(dev->parent, NULL);
> +	if (priv->regmap)
> +		return 0;
> +
> +	/* ... if that's not possible then initialize the regmap right now */
> +	base = of_iomap(dev->parent->of_node, 0);
> +	if (!base)
> +		return dev_err_probe(dev, -ENOMEM, "failed to iomap address space\n");
> +
> +	ret = devm_add_action_or_reset(dev,
> +				       imx8mp_audiomix_reset_iounmap,
> +				       (void __force *)base);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to register action\n");
> +
> +	priv->regmap = devm_regmap_init_mmio(dev, base, &regmap_config);
> +	if (IS_ERR(priv->regmap))
> +		return dev_err_probe(dev, PTR_ERR(priv->regmap),
> +				     "failed to initialize regmap\n");

Does anyone still base?  Supposed aux device probed by parent devices,
if all parent already switch to regmap, you can remove this part.

Frank

> +
> +	return 0;
> +}
> +
>  static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
>  				       const struct auxiliary_device_id *id)
>  {
> @@ -105,36 +140,25 @@ static int imx8mp_audiomix_reset_probe(struct auxiliary_device *adev,
>  	if (!priv)
>  		return -ENOMEM;
>
> -	spin_lock_init(&priv->lock);
> -
>  	priv->rcdev.owner     = THIS_MODULE;
>  	priv->rcdev.nr_resets = ARRAY_SIZE(reset_map);
>  	priv->rcdev.ops       = &imx8mp_audiomix_reset_ops;
>  	priv->rcdev.of_node   = dev->parent->of_node;
>  	priv->rcdev.dev	      = dev;
>  	priv->rcdev.of_reset_n_cells = 1;
> -	priv->base            = of_iomap(dev->parent->of_node, 0);
> -	if (!priv->base)
> -		return -ENOMEM;
>
>  	dev_set_drvdata(dev, priv);
>
> +	ret = imx8mp_audiomix_reset_get_regmap(priv);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to get regmap\n");
> +
>  	ret = devm_reset_controller_register(dev, &priv->rcdev);
>  	if (ret)
> -		goto out_unmap;
> +		return dev_err_probe(dev, ret,
> +				     "failed to register reset controller\n");
>
>  	return 0;
> -
> -out_unmap:
> -	iounmap(priv->base);
> -	return ret;
> -}
> -
> -static void imx8mp_audiomix_reset_remove(struct auxiliary_device *adev)
> -{
> -	struct imx8mp_audiomix_reset *priv = dev_get_drvdata(&adev->dev);
> -
> -	iounmap(priv->base);
>  }
>
>  static const struct auxiliary_device_id imx8mp_audiomix_reset_ids[] = {
> @@ -147,7 +171,6 @@ MODULE_DEVICE_TABLE(auxiliary, imx8mp_audiomix_reset_ids);
>
>  static struct auxiliary_driver imx8mp_audiomix_reset_driver = {
>  	.probe		= imx8mp_audiomix_reset_probe,
> -	.remove		= imx8mp_audiomix_reset_remove,
>  	.id_table	= imx8mp_audiomix_reset_ids,
>  };
>
> --
> 2.43.0
>


  reply	other threads:[~2025-11-04 16:45 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-04 12:02 [PATCH v4 0/8] Add support for i.MX8ULP's SIM LPAV Laurentiu Mihalcea
2025-11-04 12:02 ` [PATCH v4 1/8] reset: imx8mp-audiomix: Fix bad mask values Laurentiu Mihalcea
2025-11-05 15:16   ` Philipp Zabel
2025-11-04 12:02 ` [PATCH v4 2/8] dt-bindings: clock: document 8ULP's SIM LPAV Laurentiu Mihalcea
2025-11-04 12:02 ` [PATCH v4 3/8] clk: imx: add driver for imx8ulp's sim lpav Laurentiu Mihalcea
2025-11-04 12:45   ` Peng Fan
2025-11-05  9:36   ` Daniel Baluta
2025-11-04 12:02 ` [PATCH v4 4/8] reset: imx8mp-audiomix: Drop unneeded macros Laurentiu Mihalcea
2025-11-05 15:10   ` Philipp Zabel
2025-11-04 12:02 ` [PATCH v4 5/8] reset: imx8mp-audiomix: Switch to using regmap API Laurentiu Mihalcea
2025-11-04 16:44   ` Frank Li [this message]
2025-11-05 11:53     ` Laurentiu Mihalcea
2025-11-05 15:23       ` Frank Li
2025-11-05 15:10   ` Philipp Zabel
2025-11-04 12:02 ` [PATCH v4 6/8] reset: imx8mp-audiomix: Extend the driver usage Laurentiu Mihalcea
2025-11-04 16:46   ` Frank Li
2025-11-04 12:03 ` [PATCH v4 7/8] reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV Laurentiu Mihalcea
2025-11-04 12:03 ` [PATCH v4 8/8] arm64: dts: imx8ulp: add sim lpav node Laurentiu Mihalcea
2025-11-11 16:05 ` [PATCH v4 0/8] Add support for i.MX8ULP's SIM LPAV Abel Vesa
2025-11-11 16:10   ` Abel Vesa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aQothuvsclJoP74u@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=abelvesa@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=daniel.baluta@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=laurentiumihalcea111@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=sboyd@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=shengjiu.wang@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox