[PATCH v5 00/34] arm_mpam: Add basic mpam driver

[PATCH v5 00/34] arm_mpam: Add basic mpam driver

[Ben Horgan]

Hi all,

Not much substantial changed in this iteration. Some rework relating to
acpi_pptt_cache and a related proposed fix in acpica. Lots of little tidy ups
here and there.

Thanks for all the reviews and testing so far. As I mentioned before, it would be
great to get this taken up quickly. There are lots more patches to come before
we have a working MPAM story and this driver is hidden behind the expert
config. See patches for changelogs and below for branches.

Ben

Previous cover letter from James:

This is just enough MPAM driver for ACPI. DT got ripped out. If you need DT
support - please share your DTS so the DT folk know the binding is what is
needed.
This doesn't contain any of the resctrl code, meaning you can't actually drive it
from user-space yet. Because of that, its hidden behind CONFIG_EXPERT.
This will change once the user interface is connected up.

This is the initial group of patches that allows the resctrl code to be built
on top. Including that will increase the number of trees that may need to
coordinate, so breaking it up make sense.

The locking got simplified, but is still strange - this is because of the 'mpam-fb'
firmware interface specification that is still alpha. That thing needs to wait for
an interrupt after every system register write, which significantly impacts the
driver. Some features just won't work, e.g. reading the monitor registers via
perf.

I've not found a platform that can test all the behaviours around the monitors,
so this is where I'd expect the most bugs.

The MPAM spec that describes all the system and MMIO registers can be found here:
https://developer.arm.com/documentation/ddi0598/db/?lang=en
(Ignored the 'RETIRED' warning - that is just arm moving the documentation around.
 This document has the best overview)

The expectation is this will go via the arm64 tree.

This series is based on v6.18-rc4, and can be retrieved from:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/driver/v5

The rest of the driver can be found here:
https://git.kernel.org/pub/scm/linux/kernel/git/morse/linux.git mpam/snapshot/v6.18-rc4-v5

What is MPAM? Set your time-machine to 2020:
https://lore.kernel.org/lkml/20201030161120.227225-1-james.morse@arm.com/

This series was previously posted here:
[v4] https://lore.kernel.org/linux-arm-kernel/20251107123450.664001-1-ben.horgan@arm.com/
[v3] https://lore.kernel.org/linux-arm-kernel/20251017185645.26604-1-james.morse@arm.com/
[v2] lore.kernel.org/r/20250910204309.20751-1-james.morse@arm.com
[v1] lore.kernel.org/r/20250822153048.2287-1-james.morse@arm.com
[RFC] lore.kernel.org/r/20250711183648.30766-2-james.morse@arm.com

Ben Horgan (5):
  ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one
    structure
  platform: Define platform_device_put cleanup handler
  ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret()
    helper
  arm_mpam: Consider overflow in bandwidth counter state
  MAINTAINERS: new entry for MPAM Driver

James Morse (27):
  ACPI / PPTT: Add a helper to fill a cpumask from a processor container
  ACPI / PPTT: Stop acpi_count_levels() expecting callers to clear
    levels
  ACPI / PPTT: Find cache level by cache-id
  ACPI / PPTT: Add a helper to fill a cpumask from a cache_id
  arm64: kconfig: Add Kconfig entry for MPAM
  ACPI / MPAM: Parse the MPAM table
  arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate
  arm_mpam: Add the class and component structures for firmware
    described ris
  arm_mpam: Add MPAM MSC register layout definitions
  arm_mpam: Add cpuhp callbacks to probe MSC hardware
  arm_mpam: Probe hardware to find the supported partid/pmg values
  arm_mpam: Add helpers for managing the locking around the mon_sel
    registers
  arm_mpam: Probe the hardware features resctrl supports
  arm_mpam: Merge supported features during mpam_enable() into
    mpam_class
  arm_mpam: Reset MSC controls from cpuhp callbacks
  arm_mpam: Add a helper to touch an MSC from any CPU
  arm_mpam: Extend reset logic to allow devices to be reset any time
  arm_mpam: Register and enable IRQs
  arm_mpam: Use a static key to indicate when mpam is enabled
  arm_mpam: Allow configuration to be applied and restored during cpu
    online
  arm_mpam: Probe and reset the rest of the features
  arm_mpam: Add helpers to allocate monitors
  arm_mpam: Add mpam_msmon_read() to read monitor value
  arm_mpam: Track bandwidth counter state for power management
  arm_mpam: Add helper to reset saved mbwu state
  arm_mpam: Add kunit test for bitmap reset
  arm_mpam: Add kunit tests for props_mismatch()

Rohit Mathew (2):
  arm_mpam: Probe for long/lwd mbwu counters
  arm_mpam: Use long MBWU counters if supported

 MAINTAINERS                         |    8 +
 arch/arm64/Kconfig                  |   25 +
 drivers/Kconfig                     |    2 +
 drivers/Makefile                    |    1 +
 drivers/acpi/arm64/Kconfig          |    3 +
 drivers/acpi/arm64/Makefile         |    1 +
 drivers/acpi/arm64/mpam.c           |  411 ++++
 drivers/acpi/pptt.c                 |  282 ++-
 drivers/acpi/tables.c               |    2 +-
 drivers/resctrl/Kconfig             |   24 +
 drivers/resctrl/Makefile            |    4 +
 drivers/resctrl/mpam_devices.c      | 2723 +++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h     |  656 +++++++
 drivers/resctrl/test_mpam_devices.c |  389 ++++
 include/linux/acpi.h                |   26 +
 include/linux/arm_mpam.h            |   66 +
 include/linux/platform_device.h     |    1 +
 17 files changed, 4605 insertions(+), 19 deletions(-)
 create mode 100644 drivers/acpi/arm64/mpam.c
 create mode 100644 drivers/resctrl/Kconfig
 create mode 100644 drivers/resctrl/Makefile
 create mode 100644 drivers/resctrl/mpam_devices.c
 create mode 100644 drivers/resctrl/mpam_internal.h
 create mode 100644 drivers/resctrl/test_mpam_devices.c
 create mode 100644 include/linux/arm_mpam.h

-- 
2.43.0

[PATCH v5 01/34] ACPI / PPTT: Add a helper to fill a cpumask from a processor container

[Ben Horgan]

From: James Morse <james.morse@arm.com>

The ACPI MPAM table uses the UID of a processor container specified in
the PPTT to indicate the subset of CPUs and cache topology that can
access each MPAM System Component (MSC).

This information is not directly useful to the kernel. The equivalent
cpumask is needed instead.

Add a helper to find the processor container by its id, then walk
the possible CPUs to fill a cpumask with the CPUs that have this
processor container as a parent.

CC: Dave Martin <dave.martin@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Remove blank line

Changes since v3:
Refer to processor hierarchy in comments (Jonathan)
Fix indent (Jonathan)
---
 drivers/acpi/pptt.c  | 84 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h |  3 ++
 2 files changed, 87 insertions(+)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index 54676e3d82dd..b8248c0092fe 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -817,3 +817,87 @@ int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
 	return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
 					  ACPI_PPTT_ACPI_IDENTICAL);
 }
+
+/**
+ * acpi_pptt_get_child_cpus() - Find all the CPUs below a PPTT
+ * processor hierarchy node
+ *
+ * @table_hdr:		A reference to the PPTT table
+ * @parent_node:	A pointer to the processor hierarchy node in the
+ *			table_hdr
+ * @cpus:		A cpumask to fill with the CPUs below @parent_node
+ *
+ * Walks up the PPTT from every possible CPU to find if the provided
+ * @parent_node is a parent of this CPU.
+ */
+static void acpi_pptt_get_child_cpus(struct acpi_table_header *table_hdr,
+				     struct acpi_pptt_processor *parent_node,
+				     cpumask_t *cpus)
+{
+	struct acpi_pptt_processor *cpu_node;
+	u32 acpi_id;
+	int cpu;
+
+	cpumask_clear(cpus);
+
+	for_each_possible_cpu(cpu) {
+		acpi_id = get_acpi_id_for_cpu(cpu);
+		cpu_node = acpi_find_processor_node(table_hdr, acpi_id);
+
+		while (cpu_node) {
+			if (cpu_node == parent_node) {
+				cpumask_set_cpu(cpu, cpus);
+				break;
+			}
+			cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
+		}
+	}
+}
+
+/**
+ * acpi_pptt_get_cpus_from_container() - Populate a cpumask with all CPUs in a
+ *                                       processor container
+ * @acpi_cpu_id:	The UID of the processor container
+ * @cpus:		The resulting CPU mask
+ *
+ * Find the specified Processor Container, and fill @cpus with all the cpus
+ * below it.
+ *
+ * Not all 'Processor Hierarchy' entries in the PPTT are either a CPU
+ * or a Processor Container, they may exist purely to describe a
+ * Private resource. CPUs have to be leaves, so a Processor Container
+ * is a non-leaf that has the 'ACPI Processor ID valid' flag set.
+ */
+void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
+{
+	struct acpi_table_header *table_hdr;
+	struct acpi_subtable_header *entry;
+	unsigned long table_end;
+	u32 proc_sz;
+
+	cpumask_clear(cpus);
+
+	table_hdr = acpi_get_pptt();
+	if (!table_hdr)
+		return;
+
+	table_end = (unsigned long)table_hdr + table_hdr->length;
+	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
+			     sizeof(struct acpi_table_pptt));
+	proc_sz = sizeof(struct acpi_pptt_processor);
+	while ((unsigned long)entry + proc_sz <= table_end) {
+		if (entry->type == ACPI_PPTT_TYPE_PROCESSOR) {
+			struct acpi_pptt_processor *cpu_node;
+
+			cpu_node = (struct acpi_pptt_processor *)entry;
+			if (cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID &&
+			    !acpi_pptt_leaf_node(table_hdr, cpu_node) &&
+			    cpu_node->acpi_processor_id == acpi_cpu_id) {
+				acpi_pptt_get_child_cpus(table_hdr, cpu_node, cpus);
+				break;
+			}
+		}
+		entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
+				     entry->length);
+	}
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 5ff5d99f6ead..4752ebd48132 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1541,6 +1541,7 @@ int find_acpi_cpu_topology(unsigned int cpu, int level);
 int find_acpi_cpu_topology_cluster(unsigned int cpu);
 int find_acpi_cpu_topology_package(unsigned int cpu);
 int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
+void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
 #else
 static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
 {
@@ -1562,6 +1563,8 @@ static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
 {
 	return -EINVAL;
 }
+static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
+						     cpumask_t *cpus) { }
 #endif
 
 void acpi_arch_init(void);
-- 
2.43.0

[PATCH v5 02/34] ACPI / PPTT: Stop acpi_count_levels() expecting callers to clear levels

[Ben Horgan]

From: James Morse <james.morse@arm.com>

In acpi_count_levels(), the initial value of *levels passed by the
caller is really an implementation detail of acpi_count_levels(), so it
is unreasonable to expect the callers of this function to know what to
pass in for this parameter.  The only sensible initial value is 0,
which is what the only upstream caller (acpi_get_cache_info()) passes.

Use a local variable for the starting cache level in acpi_count_levels(),
and pass the result back to the caller via the function return value.

Get rid of the levels parameter, which has no remaining purpose.

Fix acpi_get_cache_info() to match.

Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
s/starting_level/current_level/ (Jonathan)
---
 drivers/acpi/pptt.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index b8248c0092fe..2856254e29d7 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -177,14 +177,14 @@ acpi_find_cache_level(struct acpi_table_header *table_hdr,
 }
 
 /**
- * acpi_count_levels() - Given a PPTT table, and a CPU node, count the cache
- * levels and split cache levels (data/instruction).
+ * acpi_count_levels() - Given a PPTT table, and a CPU node, count the
+ * total number of levels and split cache levels (data/instruction).
  * @table_hdr: Pointer to the head of the PPTT table
  * @cpu_node: processor node we wish to count caches for
- * @levels: Number of levels if success.
  * @split_levels:	Number of split cache levels (data/instruction) if
  *			success. Can by NULL.
  *
+ * Return: number of levels.
  * Given a processor node containing a processing unit, walk into it and count
  * how many levels exist solely for it, and then walk up each level until we hit
  * the root node (ignore the package level because it may be possible to have
@@ -192,14 +192,18 @@ acpi_find_cache_level(struct acpi_table_header *table_hdr,
  * split cache levels (data/instruction) that exist at each level on the way
  * up.
  */
-static void acpi_count_levels(struct acpi_table_header *table_hdr,
-			      struct acpi_pptt_processor *cpu_node,
-			      unsigned int *levels, unsigned int *split_levels)
+static int acpi_count_levels(struct acpi_table_header *table_hdr,
+			     struct acpi_pptt_processor *cpu_node,
+			     unsigned int *split_levels)
 {
+	int current_level = 0;
+
 	do {
-		acpi_find_cache_level(table_hdr, cpu_node, levels, split_levels, 0, 0);
+		acpi_find_cache_level(table_hdr, cpu_node, &current_level, split_levels, 0, 0);
 		cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
 	} while (cpu_node);
+
+	return current_level;
 }
 
 /**
@@ -645,7 +649,7 @@ int acpi_get_cache_info(unsigned int cpu, unsigned int *levels,
 	if (!cpu_node)
 		return -ENOENT;
 
-	acpi_count_levels(table, cpu_node, levels, split_levels);
+	*levels = acpi_count_levels(table, cpu_node, split_levels);
 
 	pr_debug("Cache Setup: last_level=%d split_levels=%d\n",
 		 *levels, split_levels ? *split_levels : -1);
-- 
2.43.0

[PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Ben Horgan]

In actbl2.h, acpi_pptt_cache describes the fields in the original
Cache Type Structure. In PPTT table version 3 a new field was added at the
end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
including all v1 fields it just includes this one.

In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
contain all the fields of the Cache Type Structure . Update the existing
code to use this new struct. This simplifies the code and removes a
non-standard use of ACPI_ADD_PTR.

Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
include all fields. https://github.com/acpica/acpica/pull/1059

Change since v4:
Use fields directly in acpi_pptt_cache_v1_full
Delay the casting

Changes since v3:
New patch
---
 drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
 1 file changed, 37 insertions(+), 10 deletions(-)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index 2856254e29d7..53fde9bd8140 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -21,6 +21,25 @@
 #include <linux/cacheinfo.h>
 #include <acpi/processor.h>
 
+/*
+ * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
+ * only contains the cache_id field rather than all the fields of the
+ * Cache Type Structure. Use this alternative structure until it is
+ * resolved in acpica.
+ */
+struct acpi_pptt_cache_v1_full {
+	struct acpi_subtable_header header;
+	u16 reserved;
+	u32 flags;
+	u32 next_level_of_cache;
+	u32 size;
+	u32 number_of_sets;
+	u8 associativity;
+	u8 attributes;
+	u16 line_size;
+	u32 cache_id;
+};
+
 static struct acpi_subtable_header *fetch_pptt_subtable(struct acpi_table_header *table_hdr,
 							u32 pptt_ref)
 {
@@ -56,6 +75,18 @@ static struct acpi_pptt_cache *fetch_pptt_cache(struct acpi_table_header *table_
 	return (struct acpi_pptt_cache *)fetch_pptt_subtable(table_hdr, pptt_ref);
 }
 
+static struct acpi_pptt_cache_v1_full *upgrade_pptt_cache(struct acpi_pptt_cache *cache)
+{
+	if (cache->header.length < sizeof(struct acpi_pptt_cache_v1_full))
+		return NULL;
+
+	/* No use for v1 if the only additional field is invalid */
+	if (!(cache->flags & ACPI_PPTT_CACHE_ID_VALID))
+		return NULL;
+
+	return (struct acpi_pptt_cache_v1_full *)cache;
+}
+
 static struct acpi_subtable_header *acpi_get_pptt_resource(struct acpi_table_header *table_hdr,
 							   struct acpi_pptt_processor *node,
 							   int resource)
@@ -111,7 +142,7 @@ static unsigned int acpi_pptt_walk_cache(struct acpi_table_header *table_hdr,
 	if (res->type != ACPI_PPTT_TYPE_CACHE)
 		return 0;
 
-	cache = (struct acpi_pptt_cache *) res;
+	cache = (struct acpi_pptt_cache *)res;
 	while (cache) {
 		local_level++;
 
@@ -355,7 +386,6 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
  * @this_leaf: Kernel cache info structure being updated
  * @found_cache: The PPTT node describing this cache instance
  * @cpu_node: A unique reference to describe this cache instance
- * @revision: The revision of the PPTT table
  *
  * The ACPI spec implies that the fields in the cache structures are used to
  * extend and correct the information probed from the hardware. Lets only
@@ -365,10 +395,9 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
  */
 static void update_cache_properties(struct cacheinfo *this_leaf,
 				    struct acpi_pptt_cache *found_cache,
-				    struct acpi_pptt_processor *cpu_node,
-				    u8 revision)
+				    struct acpi_pptt_processor *cpu_node)
 {
-	struct acpi_pptt_cache_v1* found_cache_v1;
+	struct acpi_pptt_cache_v1_full *found_cache_v1;
 
 	this_leaf->fw_token = cpu_node;
 	if (found_cache->flags & ACPI_PPTT_SIZE_PROPERTY_VALID)
@@ -418,9 +447,8 @@ static void update_cache_properties(struct cacheinfo *this_leaf,
 	    found_cache->flags & ACPI_PPTT_CACHE_TYPE_VALID)
 		this_leaf->type = CACHE_TYPE_UNIFIED;
 
-	if (revision >= 3 && (found_cache->flags & ACPI_PPTT_CACHE_ID_VALID)) {
-		found_cache_v1 = ACPI_ADD_PTR(struct acpi_pptt_cache_v1,
-	                                      found_cache, sizeof(struct acpi_pptt_cache));
+	found_cache_v1 =  upgrade_pptt_cache(found_cache);
+	if (found_cache_v1) {
 		this_leaf->id = found_cache_v1->cache_id;
 		this_leaf->attributes |= CACHE_ID;
 	}
@@ -445,8 +473,7 @@ static void cache_setup_acpi_cpu(struct acpi_table_header *table,
 		pr_debug("found = %p %p\n", found_cache, cpu_node);
 		if (found_cache)
 			update_cache_properties(this_leaf, found_cache,
-						ACPI_TO_POINTER(ACPI_PTR_DIFF(cpu_node, table)),
-						table->revision);
+						ACPI_TO_POINTER(ACPI_PTR_DIFF(cpu_node, table)));
 
 		index++;
 	}
-- 
2.43.0

[PATCH v5 04/34] ACPI / PPTT: Find cache level by cache-id

[Ben Horgan]

From: James Morse <james.morse@arm.com>

The MPAM table identifies caches by id. The MPAM driver also wants to know
the cache level to determine if the platform is of the shape that can be
managed via resctrl. Cacheinfo has this information, but only for CPUs that
are online.

Waiting for all CPUs to come online is a problem for platforms where
CPUs are brought online late by user-space.

Add a helper that walks every possible cache, until it finds the one
identified by cache-id, then return the level.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
---
Changes since v4:
Initialise acpi_cpu_id at declaration
Convert a for loop to do/while (Jonathan)
Use new version of acpi_pptt_cache_v1_full

Changes since v3:
Tags dropped due to rework
Fallout/simplification from adding acpi_pptt_cache_v1_full
Look for each cache type before incrementing level
---
 drivers/acpi/pptt.c  | 66 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h |  5 ++++
 2 files changed, 71 insertions(+)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index 53fde9bd8140..5b1e9e410204 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -932,3 +932,69 @@ void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
 				     entry->length);
 	}
 }
+
+/**
+ * find_acpi_cache_level_from_id() - Get the level of the specified cache
+ * @cache_id: The id field of the cache
+ *
+ * Determine the level relative to any CPU for the cache identified by
+ * cache_id. This allows the property to be found even if the CPUs are offline.
+ *
+ * The returned level can be used to group caches that are peers.
+ *
+ * The PPTT table must be rev 3 or later.
+ *
+ * If one CPU's L2 is shared with another CPU as L3, this function will return
+ * an unpredictable value.
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, the revision isn't supported or
+ * the cache cannot be found.
+ * Otherwise returns a value which represents the level of the specified cache.
+ */
+int find_acpi_cache_level_from_id(u32 cache_id)
+{
+	int cpu;
+	struct acpi_table_header *table;
+
+	table = acpi_get_pptt();
+	if (!table)
+		return -ENOENT;
+
+	if (table->revision < 3)
+		return -ENOENT;
+
+	for_each_possible_cpu(cpu) {
+		bool empty;
+		int level = 1;
+		u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+		struct acpi_pptt_cache *cache;
+		struct acpi_pptt_processor *cpu_node;
+
+		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+		if (!cpu_node)
+			continue;
+
+		do {
+			int cache_type[] = {CACHE_TYPE_INST, CACHE_TYPE_DATA, CACHE_TYPE_UNIFIED};
+
+			empty = true;
+			for (int i = 0; i < ARRAY_SIZE(cache_type); i++) {
+				struct acpi_pptt_cache_v1_full *cache_v1;
+
+				cache = acpi_find_cache_node(table, acpi_cpu_id, cache_type[i],
+							     level, &cpu_node);
+				if (!cache)
+					continue;
+
+				empty = false;
+
+				cache_v1 = upgrade_pptt_cache(cache);
+				if (cache_v1 && cache_v1->cache_id == cache_id)
+					return level;
+			}
+			level++;
+		} while (!empty);
+	}
+
+	return -ENOENT;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 4752ebd48132..be074bdfd4d1 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1542,6 +1542,7 @@ int find_acpi_cpu_topology_cluster(unsigned int cpu);
 int find_acpi_cpu_topology_package(unsigned int cpu);
 int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
 void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
+int find_acpi_cache_level_from_id(u32 cache_id);
 #else
 static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
 {
@@ -1565,6 +1566,10 @@ static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
 }
 static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
 						     cpumask_t *cpus) { }
+static inline int find_acpi_cache_level_from_id(u32 cache_id)
+{
+	return -ENOENT;
+}
 #endif
 
 void acpi_arch_init(void);
-- 
2.43.0

[PATCH v5 05/34] ACPI / PPTT: Add a helper to fill a cpumask from a cache_id

[Ben Horgan]

From: James Morse <james.morse@arm.com>

MPAM identifies CPUs by the cache_id in the PPTT cache structure.

The driver needs to know which CPUs are associated with the cache.
The CPUs may not all be online, so cacheinfo does not have the
information.

Add a helper to pull this information out of the PPTT.

CC: Rohit Mathew <Rohit.Mathew@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Same changes as previous patch in series
do/while
initialisation of acpi_cpu_id
use new version of acpi_pptt_cache_v1_full

Changes since v3:
Equivalent changes to the previous patch:
 Tags dropped due to rework
 Fallout/simplification from adding acpi_pptt_cache_v1_full
 Look for each cache type before incrementing level
---
 drivers/acpi/pptt.c  | 65 ++++++++++++++++++++++++++++++++++++++++++++
 include/linux/acpi.h |  6 ++++
 2 files changed, 71 insertions(+)

diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
index 5b1e9e410204..cea80337f01f 100644
--- a/drivers/acpi/pptt.c
+++ b/drivers/acpi/pptt.c
@@ -998,3 +998,68 @@ int find_acpi_cache_level_from_id(u32 cache_id)
 
 	return -ENOENT;
 }
+
+/**
+ * acpi_pptt_get_cpumask_from_cache_id() - Get the cpus associated with the
+ *					   specified cache
+ * @cache_id: The id field of the cache
+ * @cpus: Where to build the cpumask
+ *
+ * Determine which CPUs are below this cache in the PPTT. This allows the property
+ * to be found even if the CPUs are offline.
+ *
+ * The PPTT table must be rev 3 or later,
+ *
+ * Return: -ENOENT if the PPTT doesn't exist, or the cache cannot be found.
+ * Otherwise returns 0 and sets the cpus in the provided cpumask.
+ */
+int acpi_pptt_get_cpumask_from_cache_id(u32 cache_id, cpumask_t *cpus)
+{
+	int cpu;
+	struct acpi_table_header *table;
+
+	cpumask_clear(cpus);
+
+	table = acpi_get_pptt();
+	if (!table)
+		return -ENOENT;
+
+	if (table->revision < 3)
+		return -ENOENT;
+
+	for_each_possible_cpu(cpu) {
+		bool empty;
+		int level = 1;
+		u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
+		struct acpi_pptt_cache *cache;
+		struct acpi_pptt_processor *cpu_node;
+
+		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
+		if (!cpu_node)
+			continue;
+
+		do {
+			int cache_type[] = {CACHE_TYPE_INST, CACHE_TYPE_DATA, CACHE_TYPE_UNIFIED};
+
+			empty = true;
+			for (int i = 0; i < ARRAY_SIZE(cache_type); i++) {
+				struct acpi_pptt_cache_v1_full *cache_v1;
+
+				cache = acpi_find_cache_node(table, acpi_cpu_id, cache_type[i],
+							     level, &cpu_node);
+
+				if (!cache)
+					continue;
+
+				empty = false;
+
+				cache_v1 = upgrade_pptt_cache(cache);
+				if (cache_v1 && cache_v1->cache_id == cache_id)
+					cpumask_set_cpu(cpu, cpus);
+			}
+			level++;
+		} while (!empty);
+	}
+
+	return 0;
+}
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index be074bdfd4d1..a9dbacabdf89 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -1543,6 +1543,7 @@ int find_acpi_cpu_topology_package(unsigned int cpu);
 int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
 void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
 int find_acpi_cache_level_from_id(u32 cache_id);
+int acpi_pptt_get_cpumask_from_cache_id(u32 cache_id, cpumask_t *cpus);
 #else
 static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
 {
@@ -1570,6 +1571,11 @@ static inline int find_acpi_cache_level_from_id(u32 cache_id)
 {
 	return -ENOENT;
 }
+static inline int acpi_pptt_get_cpumask_from_cache_id(u32 cache_id,
+						      cpumask_t *cpus)
+{
+	return -ENOENT;
+}
 #endif
 
 void acpi_arch_init(void);
-- 
2.43.0

[PATCH v5 06/34] arm64: kconfig: Add Kconfig entry for MPAM

[Ben Horgan]

From: James Morse <james.morse@arm.com>

The bulk of the MPAM driver lives outside the arch code because it
largely manages MMIO devices that generate interrupts. The driver
needs a Kconfig symbol to enable it. As MPAM is only found on arm64
platforms, the arm64 tree is the most natural home for the Kconfig
option.

This Kconfig option will later be used by the arch code to enable
or disable the MPAM context-switch code, and to register properties
of CPUs with the MPAM driver.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
CC: Dave Martin <dave.martin@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 arch/arm64/Kconfig | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6663ffd23f25..67015d51f7b5 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2023,6 +2023,29 @@ config ARM64_TLB_RANGE
 	  ARMv8.4-TLBI provides TLBI invalidation instruction that apply to a
 	  range of input addresses.
 
+config ARM64_MPAM
+	bool "Enable support for MPAM"
+	help
+	  Memory System Resource Partitioning and Monitoring (MPAM) is an
+	  optional extension to the Arm architecture that allows each
+	  transaction issued to the memory system to be labelled with a
+	  Partition identifier (PARTID) and Performance Monitoring Group
+	  identifier (PMG).
+
+	  Memory system components, such as the caches, can be configured with
+	  policies to control how much of various physical resources (such as
+	  memory bandwidth or cache memory) the transactions labelled with each
+	  PARTID can consume.  Depending on the capabilities of the hardware,
+	  the PARTID and PMG can also be used as filtering criteria to measure
+	  the memory system resource consumption of different parts of a
+	  workload.
+
+	  Use of this extension requires CPU support, support in the
+	  Memory System Components (MSC), and a description from firmware
+	  of where the MSCs are in the address space.
+
+	  MPAM is exposed to user-space via the resctrl pseudo filesystem.
+
 endmenu # "ARMv8.4 architectural features"
 
 menu "ARMv8.5 architectural features"
-- 
2.43.0

[PATCH v5 07/34] platform: Define platform_device_put cleanup handler

[Ben Horgan]

Define a cleanup helper for use with __free to destroy platform devices
automatically when the pointer goes out of scope. This is only intended to
be used in error cases and so should be used with return_ptr() or
no_free_ptr() directly to avoid the automatic destruction on success.

A first use of this is introduced in a subsequent commit.

Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 include/linux/platform_device.h | 1 +
 1 file changed, 1 insertion(+)

diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 074754c23d33..23a30ada2d4c 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -232,6 +232,7 @@ extern int platform_device_add_data(struct platform_device *pdev,
 extern int platform_device_add(struct platform_device *pdev);
 extern void platform_device_del(struct platform_device *pdev);
 extern void platform_device_put(struct platform_device *pdev);
+DEFINE_FREE(platform_device_put, struct platform_device *, if (_T) platform_device_put(_T))
 
 struct platform_driver {
 	int (*probe)(struct platform_device *);
-- 
2.43.0

[PATCH v5 08/34] ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret() helper

[Ben Horgan]

Define a cleanup helper for use with __free to release the acpi table when
the pointer goes out of scope. Also, introduce the helper
acpi_get_table_ret() to simplify a commonly used pattern involving
acpi_get_table().

These are first used in a subsequent commit.

Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 include/linux/acpi.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index a9dbacabdf89..1124b7dc79fd 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -8,6 +8,7 @@
 #ifndef _LINUX_ACPI_H
 #define _LINUX_ACPI_H
 
+#include <linux/cleanup.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>	/* for struct resource */
 #include <linux/resource_ext.h>
@@ -221,6 +222,17 @@ void acpi_reserve_initial_tables (void);
 void acpi_table_init_complete (void);
 int acpi_table_init (void);
 
+static inline struct acpi_table_header *acpi_get_table_ret(char *signature, u32 instance)
+{
+	struct acpi_table_header *table;
+	int status = acpi_get_table(signature, instance, &table);
+
+	if (ACPI_FAILURE(status))
+		return ERR_PTR(-ENOENT);
+	return table;
+}
+DEFINE_FREE(acpi_put_table, struct acpi_table_header *, if (!IS_ERR_OR_NULL(_T)) acpi_put_table(_T))
+
 int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
 int __init_or_acpilib acpi_table_parse_entries(char *id,
 		unsigned long table_size, int entry_id,
-- 
2.43.0

[PATCH v5 09/34] ACPI / MPAM: Parse the MPAM table

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Add code to parse the arm64 specific MPAM table, looking up the cache
level from the PPTT and feeding the end result into the MPAM driver.

This happens in two stages. Platform devices are created first for the
MSC devices. Once the driver probes it calls acpi_mpam_parse_resources()
to discover the RIS entries the MSC contains.

For now the MPAM hook mpam_ris_create() is stubbed out, but will update
the MPAM driver with optional discovered data about the RIS entries.

CC: Carl Worth <carl@os.amperecomputing.com>
Link: https://developer.arm.com/documentation/den0065/3-0bet/?lang=en
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Gavin:
u32 intid
irq < 0
if formatting
revision < 1 pr_debug
MSC -> MSCs
Checks to ensure tbl_msc->length within the table before accessing

Fenghua:
proximity typo
table_end calculation
buddy and companion refcounting
Use MPAM_CLASS_ID_DEFAULT for memory class id

Tighten a WARN_ON_ONCE()
Spaces -> Tabs
Remove unused GLOBAL_AFFINITY define

Changes since v3:
return irq from acpi_mpam_register_irq (Jonathan)
err -> len rename (Jonathan)
Move table initialisation after checking (Jonathan)
Add sanity checking in acpi_mpam_count_msc() (Jonathan)
---
 arch/arm64/Kconfig          |   1 +
 drivers/acpi/arm64/Kconfig  |   3 +
 drivers/acpi/arm64/Makefile |   1 +
 drivers/acpi/arm64/mpam.c   | 411 ++++++++++++++++++++++++++++++++++++
 drivers/acpi/tables.c       |   2 +-
 include/linux/arm_mpam.h    |  47 +++++
 6 files changed, 464 insertions(+), 1 deletion(-)
 create mode 100644 drivers/acpi/arm64/mpam.c
 create mode 100644 include/linux/arm_mpam.h

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 67015d51f7b5..c5e66d5d72cd 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2025,6 +2025,7 @@ config ARM64_TLB_RANGE
 
 config ARM64_MPAM
 	bool "Enable support for MPAM"
+	select ACPI_MPAM if ACPI
 	help
 	  Memory System Resource Partitioning and Monitoring (MPAM) is an
 	  optional extension to the Arm architecture that allows each
diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
index b3ed6212244c..f2fd79f22e7d 100644
--- a/drivers/acpi/arm64/Kconfig
+++ b/drivers/acpi/arm64/Kconfig
@@ -21,3 +21,6 @@ config ACPI_AGDI
 
 config ACPI_APMT
 	bool
+
+config ACPI_MPAM
+	bool
diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
index 05ecde9eaabe..9390b57cb564 100644
--- a/drivers/acpi/arm64/Makefile
+++ b/drivers/acpi/arm64/Makefile
@@ -4,6 +4,7 @@ obj-$(CONFIG_ACPI_APMT) 	+= apmt.o
 obj-$(CONFIG_ACPI_FFH)		+= ffh.o
 obj-$(CONFIG_ACPI_GTDT) 	+= gtdt.o
 obj-$(CONFIG_ACPI_IORT) 	+= iort.o
+obj-$(CONFIG_ACPI_MPAM) 	+= mpam.o
 obj-$(CONFIG_ACPI_PROCESSOR_IDLE) += cpuidle.o
 obj-$(CONFIG_ARM_AMBA)		+= amba.o
 obj-y				+= dma.o init.o
diff --git a/drivers/acpi/arm64/mpam.c b/drivers/acpi/arm64/mpam.c
new file mode 100644
index 000000000000..a6979d99cbd9
--- /dev/null
+++ b/drivers/acpi/arm64/mpam.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2025 Arm Ltd.
+
+/* Parse the MPAM ACPI table feeding the discovered nodes into the driver */
+
+#define pr_fmt(fmt) "ACPI MPAM: " fmt
+
+#include <linux/acpi.h>
+#include <linux/arm_mpam.h>
+#include <linux/bits.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/platform_device.h>
+
+#include <acpi/processor.h>
+
+/*
+ * Flags for acpi_table_mpam_msc.*_interrupt_flags.
+ * See 2.1.1 Interrupt Flags, Table 5, of DEN0065B_MPAM_ACPI_3.0-bet.
+ */
+#define ACPI_MPAM_MSC_IRQ_MODE                              BIT(0)
+#define ACPI_MPAM_MSC_IRQ_TYPE_MASK                         GENMASK(2, 1)
+#define ACPI_MPAM_MSC_IRQ_TYPE_WIRED                        0
+#define ACPI_MPAM_MSC_IRQ_AFFINITY_TYPE_MASK                BIT(3)
+#define ACPI_MPAM_MSC_IRQ_AFFINITY_TYPE_PROCESSOR           0
+#define ACPI_MPAM_MSC_IRQ_AFFINITY_TYPE_PROCESSOR_CONTAINER 1
+#define ACPI_MPAM_MSC_IRQ_AFFINITY_VALID                    BIT(4)
+
+/*
+ * Encodings for the MSC node body interface type field.
+ * See 2.1 MPAM MSC node, Table 4 of DEN0065B_MPAM_ACPI_3.0-bet.
+ */
+#define ACPI_MPAM_MSC_IFACE_MMIO   0x00
+#define ACPI_MPAM_MSC_IFACE_PCC    0x0a
+
+static bool _is_ppi_partition(u32 flags)
+{
+	u32 aff_type, is_ppi;
+	bool ret;
+
+	is_ppi = FIELD_GET(ACPI_MPAM_MSC_IRQ_AFFINITY_VALID, flags);
+	if (!is_ppi)
+		return false;
+
+	aff_type = FIELD_GET(ACPI_MPAM_MSC_IRQ_AFFINITY_TYPE_MASK, flags);
+	ret = (aff_type == ACPI_MPAM_MSC_IRQ_AFFINITY_TYPE_PROCESSOR_CONTAINER);
+	if (ret)
+		pr_err_once("Partitioned interrupts not supported\n");
+
+	return ret;
+}
+
+static int acpi_mpam_register_irq(struct platform_device *pdev,
+				  u32 intid, u32 flags)
+{
+	int irq;
+	u32 int_type;
+	int trigger;
+
+	if (!intid)
+		return -EINVAL;
+
+	if (_is_ppi_partition(flags))
+		return -EINVAL;
+
+	trigger = FIELD_GET(ACPI_MPAM_MSC_IRQ_MODE, flags);
+	int_type = FIELD_GET(ACPI_MPAM_MSC_IRQ_TYPE_MASK, flags);
+	if (int_type != ACPI_MPAM_MSC_IRQ_TYPE_WIRED)
+		return -EINVAL;
+
+	irq = acpi_register_gsi(&pdev->dev, intid, trigger, ACPI_ACTIVE_HIGH);
+	if (irq < 0)
+		pr_err_once("Failed to register interrupt 0x%x with ACPI\n", intid);
+
+	return irq;
+}
+
+static void acpi_mpam_parse_irqs(struct platform_device *pdev,
+				 struct acpi_mpam_msc_node *tbl_msc,
+				 struct resource *res, int *res_idx)
+{
+	u32 flags, intid;
+	int irq;
+
+	intid = tbl_msc->overflow_interrupt;
+	flags = tbl_msc->overflow_interrupt_flags;
+	irq = acpi_mpam_register_irq(pdev, intid, flags);
+	if (irq > 0)
+		res[(*res_idx)++] = DEFINE_RES_IRQ_NAMED(irq, "overflow");
+
+	intid = tbl_msc->error_interrupt;
+	flags = tbl_msc->error_interrupt_flags;
+	irq = acpi_mpam_register_irq(pdev, intid, flags);
+	if (irq > 0)
+		res[(*res_idx)++] = DEFINE_RES_IRQ_NAMED(irq, "error");
+}
+
+static int acpi_mpam_parse_resource(struct mpam_msc *msc,
+				    struct acpi_mpam_resource_node *res)
+{
+	int level, nid;
+	u32 cache_id;
+
+	switch (res->locator_type) {
+	case ACPI_MPAM_LOCATION_TYPE_PROCESSOR_CACHE:
+		cache_id = res->locator.cache_locator.cache_reference;
+		level = find_acpi_cache_level_from_id(cache_id);
+		if (level <= 0) {
+			pr_err_once("Bad level (%d) for cache with id %u\n", level, cache_id);
+			return -EINVAL;
+		}
+		return mpam_ris_create(msc, res->ris_index, MPAM_CLASS_CACHE,
+				       level, cache_id);
+	case ACPI_MPAM_LOCATION_TYPE_MEMORY:
+		nid = pxm_to_node(res->locator.memory_locator.proximity_domain);
+		if (nid == NUMA_NO_NODE) {
+			pr_debug("Bad proximity domain %lld, using node 0 instead\n",
+				 res->locator.memory_locator.proximity_domain);
+			nid = 0;
+		}
+		return mpam_ris_create(msc, res->ris_index, MPAM_CLASS_MEMORY,
+				       MPAM_CLASS_ID_DEFAULT, nid);
+	default:
+		/* These get discovered later and are treated as unknown */
+		return 0;
+	}
+}
+
+int acpi_mpam_parse_resources(struct mpam_msc *msc,
+			      struct acpi_mpam_msc_node *tbl_msc)
+{
+	int i, err;
+	char *ptr, *table_end;
+	struct acpi_mpam_resource_node *resource;
+
+	table_end = (char *)tbl_msc + tbl_msc->length;
+	ptr = (char *)(tbl_msc + 1);
+	for (i = 0; i < tbl_msc->num_resource_nodes; i++) {
+		u64 max_deps, remaining_table;
+
+		if (ptr + sizeof(*resource) > table_end)
+			return -EINVAL;
+
+		resource = (struct acpi_mpam_resource_node *)ptr;
+
+		remaining_table = table_end - ptr;
+		max_deps = remaining_table / sizeof(struct acpi_mpam_func_deps);
+		if (resource->num_functional_deps > max_deps) {
+			pr_debug("MSC has impossible number of functional dependencies\n");
+			return -EINVAL;
+		}
+
+		err = acpi_mpam_parse_resource(msc, resource);
+		if (err)
+			return err;
+
+		ptr += sizeof(*resource);
+		ptr += resource->num_functional_deps * sizeof(struct acpi_mpam_func_deps);
+	}
+
+	return 0;
+}
+
+/*
+ * Creates the device power management link and returns true if the
+ * acpi id is valid and usable for cpu affinity.  This is the case
+ * when the linked device is a processor or a processor container.
+ */
+static bool __init parse_msc_pm_link(struct acpi_mpam_msc_node *tbl_msc,
+				     struct platform_device *pdev,
+				     u32 *acpi_id)
+{
+	char hid[sizeof(tbl_msc->hardware_id_linked_device) + 1] = { 0 };
+	bool acpi_id_valid = false;
+	struct acpi_device *buddy;
+	char uid[11];
+	int len;
+
+	memcpy(hid, &tbl_msc->hardware_id_linked_device,
+	       sizeof(tbl_msc->hardware_id_linked_device));
+
+	if (!strcmp(hid, ACPI_PROCESSOR_CONTAINER_HID)) {
+		*acpi_id = tbl_msc->instance_id_linked_device;
+		acpi_id_valid = true;
+	}
+
+	len = snprintf(uid, sizeof(uid), "%u",
+		       tbl_msc->instance_id_linked_device);
+	if (len >= sizeof(uid)) {
+		pr_debug("Failed to convert uid of device for power management.");
+		return acpi_id_valid;
+	}
+
+	buddy = acpi_dev_get_first_match_dev(hid, uid, -1);
+	if (buddy) {
+		device_link_add(&pdev->dev, &buddy->dev, DL_FLAG_STATELESS);
+		acpi_dev_put(buddy);
+	}
+
+	return acpi_id_valid;
+}
+
+static int decode_interface_type(struct acpi_mpam_msc_node *tbl_msc,
+				 enum mpam_msc_iface *iface)
+{
+	switch (tbl_msc->interface_type) {
+	case ACPI_MPAM_MSC_IFACE_MMIO:
+		*iface = MPAM_IFACE_MMIO;
+		return 0;
+	case ACPI_MPAM_MSC_IFACE_PCC:
+		*iface = MPAM_IFACE_PCC;
+		return 0;
+	default:
+		return -EINVAL;
+	}
+}
+
+static struct platform_device * __init acpi_mpam_parse_msc(struct acpi_mpam_msc_node *tbl_msc)
+{
+	struct platform_device *pdev __free(platform_device_put) =
+		platform_device_alloc("mpam_msc", tbl_msc->identifier);
+	int next_res = 0, next_prop = 0, err;
+	/* pcc, nrdy, affinity and a sentinel */
+	struct property_entry props[4] = { 0 };
+	/* mmio, 2xirq, no sentinel. */
+	struct resource res[3] = { 0 };
+	struct acpi_device *companion;
+	enum mpam_msc_iface iface;
+	char uid[16];
+	u32 acpi_id;
+
+	if (!pdev)
+		return ERR_PTR(-ENOMEM);
+
+	/* Some power management is described in the namespace: */
+	err = snprintf(uid, sizeof(uid), "%u", tbl_msc->identifier);
+	if (err > 0 && err < sizeof(uid)) {
+		companion = acpi_dev_get_first_match_dev("ARMHAA5C", uid, -1);
+		if (companion) {
+			ACPI_COMPANION_SET(&pdev->dev, companion);
+			acpi_dev_put(companion);
+		} else {
+			pr_debug("MSC.%u: missing namespace entry\n", tbl_msc->identifier);
+		}
+	}
+
+	if (decode_interface_type(tbl_msc, &iface)) {
+		pr_debug("MSC.%u: unknown interface type\n", tbl_msc->identifier);
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (iface == MPAM_IFACE_MMIO) {
+		res[next_res++] = DEFINE_RES_MEM_NAMED(tbl_msc->base_address,
+						       tbl_msc->mmio_size,
+						       "MPAM:MSC");
+	} else if (iface == MPAM_IFACE_PCC) {
+		props[next_prop++] = PROPERTY_ENTRY_U32("pcc-channel",
+							tbl_msc->base_address);
+	}
+
+	acpi_mpam_parse_irqs(pdev, tbl_msc, res, &next_res);
+
+	WARN_ON_ONCE(next_res > ARRAY_SIZE(res));
+	err = platform_device_add_resources(pdev, res, next_res);
+	if (err)
+		return ERR_PTR(err);
+
+	props[next_prop++] = PROPERTY_ENTRY_U32("arm,not-ready-us",
+						tbl_msc->max_nrdy_usec);
+
+	/*
+	 * The MSC's CPU affinity is described via its linked power
+	 * management device, but only if it points at a Processor or
+	 * Processor Container.
+	 */
+	if (parse_msc_pm_link(tbl_msc, pdev, &acpi_id))
+		props[next_prop++] = PROPERTY_ENTRY_U32("cpu_affinity", acpi_id);
+
+	WARN_ON_ONCE(next_prop > ARRAY_SIZE(props) - 1);
+	err = device_create_managed_software_node(&pdev->dev, props, NULL);
+	if (err)
+		return ERR_PTR(err);
+
+	/*
+	 * Stash the table entry for acpi_mpam_parse_resources() to discover
+	 * what this MSC controls.
+	 */
+	err = platform_device_add_data(pdev, tbl_msc, tbl_msc->length);
+	if (err)
+		return ERR_PTR(err);
+
+	err = platform_device_add(pdev);
+	if (err)
+		return ERR_PTR(err);
+
+	return_ptr(pdev);
+}
+
+static int __init acpi_mpam_parse(void)
+{
+	char *table_end, *table_offset;
+	struct acpi_mpam_msc_node *tbl_msc;
+	struct platform_device *pdev;
+
+	if (acpi_disabled || !system_supports_mpam())
+		return 0;
+
+	struct acpi_table_header *table __free(acpi_put_table) =
+		acpi_get_table_ret(ACPI_SIG_MPAM, 0);
+
+	if (IS_ERR(table))
+		return 0;
+
+	if (table->revision < 1) {
+		pr_debug("MPAM ACPI table revision %d not supported\n", table->revision);
+		return 0;
+	}
+
+	table_offset = (char *)(table + 1);
+	table_end = (char *)table + table->length;
+
+	while (table_offset < table_end) {
+		tbl_msc = (struct acpi_mpam_msc_node *)table_offset;
+		if (table_offset + sizeof(*tbl_msc) > table_end ||
+		    table_offset + tbl_msc->length > table_end) {
+			pr_err("MSC entry overlaps end of ACPI table\n");
+			return -EINVAL;
+		}
+		table_offset += tbl_msc->length;
+
+		/*
+		 * If any of the reserved fields are set, make no attempt to
+		 * parse the MSC structure. This MSC will still be counted by
+		 * acpi_mpam_count_msc(), meaning the MPAM driver can't probe
+		 * against all MSC, and will never be enabled. There is no way
+		 * to enable it safely, because we cannot determine safe
+		 * system-wide partid and pmg ranges in this situation.
+		 */
+		if (tbl_msc->reserved || tbl_msc->reserved1 || tbl_msc->reserved2) {
+			pr_err_once("Unrecognised MSC, MPAM not usable\n");
+			pr_debug("MSC.%u: reserved field set\n", tbl_msc->identifier);
+			continue;
+		}
+
+		if (!tbl_msc->mmio_size) {
+			pr_debug("MSC.%u: marked as disabled\n", tbl_msc->identifier);
+			continue;
+		}
+
+		pdev = acpi_mpam_parse_msc(tbl_msc);
+		if (IS_ERR(pdev))
+			return PTR_ERR(pdev);
+	}
+
+	return 0;
+}
+
+/**
+ * acpi_mpam_count_msc() - Count the number of MSC described by firmware.
+ *
+ * Returns the number of MSCs, or zero for an error.
+ *
+ * This can be called before or in parallel with acpi_mpam_parse().
+ */
+int acpi_mpam_count_msc(void)
+{
+	char *table_end, *table_offset;
+	struct acpi_mpam_msc_node *tbl_msc;
+	int count = 0;
+
+	if (acpi_disabled || !system_supports_mpam())
+		return 0;
+
+	struct acpi_table_header *table __free(acpi_put_table) =
+		acpi_get_table_ret(ACPI_SIG_MPAM, 0);
+
+	if (IS_ERR(table))
+		return 0;
+
+	if (table->revision < 1)
+		return 0;
+
+	table_offset = (char *)(table + 1);
+	table_end = (char *)table + table->length;
+
+	while (table_offset < table_end) {
+		tbl_msc = (struct acpi_mpam_msc_node *)table_offset;
+
+		if (table_offset + sizeof(*tbl_msc) > table_end)
+			return -EINVAL;
+		if (tbl_msc->length < sizeof(*tbl_msc))
+			return -EINVAL;
+		if (tbl_msc->length > table_end - table_offset)
+			return -EINVAL;
+		table_offset += tbl_msc->length;
+
+		if (!tbl_msc->mmio_size)
+			continue;
+
+		count++;
+	}
+
+	return count;
+}
+
+/*
+ * Call after ACPI devices have been created, which happens behind acpi_scan_init()
+ * called from subsys_initcall(). PCC requires the mailbox driver, which is
+ * initialised from postcore_initcall().
+ */
+subsys_initcall_sync(acpi_mpam_parse);
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 57fc8bc56166..4286e4af1092 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -408,7 +408,7 @@ static const char table_sigs[][ACPI_NAMESEG_SIZE] __nonstring_array __initconst
 	ACPI_SIG_PSDT, ACPI_SIG_RSDT, ACPI_SIG_XSDT, ACPI_SIG_SSDT,
 	ACPI_SIG_IORT, ACPI_SIG_NFIT, ACPI_SIG_HMAT, ACPI_SIG_PPTT,
 	ACPI_SIG_NHLT, ACPI_SIG_AEST, ACPI_SIG_CEDT, ACPI_SIG_AGDI,
-	ACPI_SIG_NBFT, ACPI_SIG_SWFT};
+	ACPI_SIG_NBFT, ACPI_SIG_SWFT, ACPI_SIG_MPAM};
 
 #define ACPI_HEADER_SIZE sizeof(struct acpi_table_header)
 
diff --git a/include/linux/arm_mpam.h b/include/linux/arm_mpam.h
new file mode 100644
index 000000000000..4b7f335181e0
--- /dev/null
+++ b/include/linux/arm_mpam.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2025 Arm Ltd. */
+
+#ifndef __LINUX_ARM_MPAM_H
+#define __LINUX_ARM_MPAM_H
+
+#include <linux/acpi.h>
+#include <linux/types.h>
+
+struct mpam_msc;
+
+enum mpam_msc_iface {
+	MPAM_IFACE_MMIO,	/* a real MPAM MSC */
+	MPAM_IFACE_PCC,		/* a fake MPAM MSC */
+};
+
+enum mpam_class_types {
+	MPAM_CLASS_CACHE,	/* Caches, e.g. L2, L3 */
+	MPAM_CLASS_MEMORY,	/* Main memory */
+	MPAM_CLASS_UNKNOWN,	/* Everything else, e.g. SMMU */
+};
+
+#define MPAM_CLASS_ID_DEFAULT	255
+
+#ifdef CONFIG_ACPI_MPAM
+int acpi_mpam_parse_resources(struct mpam_msc *msc,
+			      struct acpi_mpam_msc_node *tbl_msc);
+
+int acpi_mpam_count_msc(void);
+#else
+static inline int acpi_mpam_parse_resources(struct mpam_msc *msc,
+					    struct acpi_mpam_msc_node *tbl_msc)
+{
+	return -EINVAL;
+}
+
+static inline int acpi_mpam_count_msc(void) { return -EINVAL; }
+#endif
+
+static inline int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
+				  enum mpam_class_types type, u8 class_id,
+				  int component_id)
+{
+	return -EINVAL;
+}
+
+#endif /* __LINUX_ARM_MPAM_H */
-- 
2.43.0

[PATCH v5 10/34] arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Probing MPAM is convoluted. MSCs that are integrated with a CPU may
only be accessible from those CPUs, and they may not be online.
Touching the hardware early is pointless as MPAM can't be used until
the system-wide common values for num_partid and num_pmg have been
discovered.

Start with driver probe/remove and mapping the MSC.

Cc: Carl Worth <carl@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Gavin:
if formatting
comment/msg clarity
make update_msc_accessibility() return void
Return -EINVAL if not MMIO interface
Jonathan:
Whitespace changes
Simplify mpam_msc_drv_probe() by returning early on error

Changes since v3:
From Jonathan:
Include cleanup
Use devm_mutex_init()
Add an ERR_CAST()
Fenghua:
Return zero from update_msc_accessibility()
Additional:
Fail probe if MSC doesn't have an MMIO interface
---
 arch/arm64/Kconfig              |   1 +
 drivers/Kconfig                 |   2 +
 drivers/Makefile                |   1 +
 drivers/resctrl/Kconfig         |  15 +++
 drivers/resctrl/Makefile        |   4 +
 drivers/resctrl/mpam_devices.c  | 190 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |  49 ++++++++
 7 files changed, 262 insertions(+)
 create mode 100644 drivers/resctrl/Kconfig
 create mode 100644 drivers/resctrl/Makefile
 create mode 100644 drivers/resctrl/mpam_devices.c
 create mode 100644 drivers/resctrl/mpam_internal.h

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index c5e66d5d72cd..004d58cfbff8 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -2025,6 +2025,7 @@ config ARM64_TLB_RANGE
 
 config ARM64_MPAM
 	bool "Enable support for MPAM"
+	select ARM64_MPAM_DRIVER if EXPERT	# does nothing yet
 	select ACPI_MPAM if ACPI
 	help
 	  Memory System Resource Partitioning and Monitoring (MPAM) is an
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 4915a63866b0..3054b50a2f4c 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -251,4 +251,6 @@ source "drivers/hte/Kconfig"
 
 source "drivers/cdx/Kconfig"
 
+source "drivers/resctrl/Kconfig"
+
 endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 8e1ffa4358d5..20eb17596b89 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -194,6 +194,7 @@ obj-$(CONFIG_HTE)		+= hte/
 obj-$(CONFIG_DRM_ACCEL)		+= accel/
 obj-$(CONFIG_CDX_BUS)		+= cdx/
 obj-$(CONFIG_DPLL)		+= dpll/
+obj-y				+= resctrl/
 
 obj-$(CONFIG_DIBS)		+= dibs/
 obj-$(CONFIG_S390)		+= s390/
diff --git a/drivers/resctrl/Kconfig b/drivers/resctrl/Kconfig
new file mode 100644
index 000000000000..5f7f748e611e
--- /dev/null
+++ b/drivers/resctrl/Kconfig
@@ -0,0 +1,15 @@
+menuconfig ARM64_MPAM_DRIVER
+	bool "MPAM driver"
+	depends on ARM64 && ARM64_MPAM && EXPERT
+	help
+	  Memory System Resource Partitioning and Monitoring (MPAM) driver for
+	  System IP, e.g. caches and memory controllers.
+
+if ARM64_MPAM_DRIVER
+
+config ARM64_MPAM_DRIVER_DEBUG
+	bool "Enable debug messages from the MPAM driver"
+	help
+	  Say yes here to enable debug messages from the MPAM driver.
+
+endif
diff --git a/drivers/resctrl/Makefile b/drivers/resctrl/Makefile
new file mode 100644
index 000000000000..898199dcf80d
--- /dev/null
+++ b/drivers/resctrl/Makefile
@@ -0,0 +1,4 @@
+obj-$(CONFIG_ARM64_MPAM_DRIVER)			+= mpam.o
+mpam-y						+= mpam_devices.o
+
+ccflags-$(CONFIG_ARM64_MPAM_DRIVER_DEBUG)	+= -DDEBUG
diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
new file mode 100644
index 000000000000..e097e852f9c3
--- /dev/null
+++ b/drivers/resctrl/mpam_devices.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2025 Arm Ltd.
+
+#define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__
+
+#include <linux/acpi.h>
+#include <linux/arm_mpam.h>
+#include <linux/cacheinfo.h>
+#include <linux/cpumask.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/gfp.h>
+#include <linux/list.h>
+#include <linux/lockdep.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/srcu.h>
+#include <linux/types.h>
+
+#include "mpam_internal.h"
+
+/*
+ * mpam_list_lock protects the SRCU lists when writing. Once the
+ * mpam_enabled key is enabled these lists are read-only,
+ * unless the error interrupt disables the driver.
+ */
+static DEFINE_MUTEX(mpam_list_lock);
+static LIST_HEAD(mpam_all_msc);
+
+struct srcu_struct mpam_srcu;
+
+/*
+ * Number of MSCs that have been probed. Once all MSCs have been probed MPAM
+ * can be enabled.
+ */
+static atomic_t mpam_num_msc;
+
+/*
+ * An MSC can control traffic from a set of CPUs, but may only be accessible
+ * from a (hopefully wider) set of CPUs. The common reason for this is power
+ * management. If all the CPUs in a cluster are in PSCI:CPU_SUSPEND, the
+ * corresponding cache may also be powered off. By making accesses from
+ * one of those CPUs, we ensure we don't access a cache that's powered off.
+ */
+static void update_msc_accessibility(struct mpam_msc *msc)
+{
+	u32 affinity_id;
+	int err;
+
+	err = device_property_read_u32(&msc->pdev->dev, "cpu_affinity",
+				       &affinity_id);
+	if (err)
+		cpumask_copy(&msc->accessibility, cpu_possible_mask);
+	else
+		acpi_pptt_get_cpus_from_container(affinity_id, &msc->accessibility);
+}
+
+static void mpam_msc_destroy(struct mpam_msc *msc)
+{
+	struct platform_device *pdev = msc->pdev;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_del_rcu(&msc->all_msc_list);
+	platform_set_drvdata(pdev, NULL);
+}
+
+static void mpam_msc_drv_remove(struct platform_device *pdev)
+{
+	struct mpam_msc *msc = platform_get_drvdata(pdev);
+
+	mutex_lock(&mpam_list_lock);
+	mpam_msc_destroy(msc);
+	mutex_unlock(&mpam_list_lock);
+
+	synchronize_srcu(&mpam_srcu);
+}
+
+static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
+{
+	int err;
+	u32 tmp;
+	struct mpam_msc *msc;
+	struct resource *msc_res;
+	struct device *dev = &pdev->dev;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	msc = devm_kzalloc(&pdev->dev, sizeof(*msc), GFP_KERNEL);
+	if (!msc)
+		return ERR_PTR(-ENOMEM);
+
+	err = devm_mutex_init(dev, &msc->probe_lock);
+	if (err)
+		return ERR_PTR(err);
+
+	err = devm_mutex_init(dev, &msc->part_sel_lock);
+	if (err)
+		return ERR_PTR(err);
+
+	msc->id = pdev->id;
+	msc->pdev = pdev;
+	INIT_LIST_HEAD_RCU(&msc->all_msc_list);
+	INIT_LIST_HEAD_RCU(&msc->ris);
+
+	update_msc_accessibility(msc);
+	if (cpumask_empty(&msc->accessibility)) {
+		dev_err_once(dev, "MSC is not accessible from any CPU!");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (device_property_read_u32(&pdev->dev, "pcc-channel", &tmp))
+		msc->iface = MPAM_IFACE_MMIO;
+	else
+		msc->iface = MPAM_IFACE_PCC;
+
+	if (msc->iface == MPAM_IFACE_MMIO) {
+		void __iomem *io;
+
+		io = devm_platform_get_and_ioremap_resource(pdev, 0,
+							    &msc_res);
+		if (IS_ERR(io)) {
+			dev_err_once(dev, "Failed to map MSC base address\n");
+			return ERR_CAST(io);
+		}
+		msc->mapped_hwpage_sz = msc_res->end - msc_res->start;
+		msc->mapped_hwpage = io;
+	} else {
+		return ERR_PTR(-EINVAL);
+	}
+
+	list_add_rcu(&msc->all_msc_list, &mpam_all_msc);
+	platform_set_drvdata(pdev, msc);
+
+	return msc;
+}
+
+static int fw_num_msc;
+
+static int mpam_msc_drv_probe(struct platform_device *pdev)
+{
+	int err;
+	struct mpam_msc *msc = NULL;
+	void *plat_data = pdev->dev.platform_data;
+
+	mutex_lock(&mpam_list_lock);
+	msc = do_mpam_msc_drv_probe(pdev);
+	mutex_unlock(&mpam_list_lock);
+
+	if (IS_ERR(msc))
+		return PTR_ERR(msc);
+
+	/* Create RIS entries described by firmware */
+	err = acpi_mpam_parse_resources(msc, plat_data);
+	if (err) {
+		mpam_msc_drv_remove(pdev);
+		return err;
+	}
+
+	if (atomic_add_return(1, &mpam_num_msc) == fw_num_msc)
+		pr_info("Discovered all MSCs\n");
+
+	return 0;
+}
+
+static struct platform_driver mpam_msc_driver = {
+	.driver = {
+		.name = "mpam_msc",
+	},
+	.probe = mpam_msc_drv_probe,
+	.remove = mpam_msc_drv_remove,
+};
+
+static int __init mpam_msc_driver_init(void)
+{
+	if (!system_supports_mpam())
+		return -EOPNOTSUPP;
+
+	init_srcu_struct(&mpam_srcu);
+
+	fw_num_msc = acpi_mpam_count_msc();
+	if (fw_num_msc <= 0) {
+		pr_err("No MSC devices found in firmware\n");
+		return -EINVAL;
+	}
+
+	return platform_driver_register(&mpam_msc_driver);
+}
+subsys_initcall(mpam_msc_driver_init);
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
new file mode 100644
index 000000000000..540066903eca
--- /dev/null
+++ b/drivers/resctrl/mpam_internal.h
@@ -0,0 +1,49 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+// Copyright (C) 2025 Arm Ltd.
+
+#ifndef MPAM_INTERNAL_H
+#define MPAM_INTERNAL_H
+
+#include <linux/arm_mpam.h>
+#include <linux/cpumask.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+struct platform_device;
+
+struct mpam_msc {
+	/* member of mpam_all_msc */
+	struct list_head	all_msc_list;
+
+	int			id;
+	struct platform_device	*pdev;
+
+	/* Not modified after mpam_is_enabled() becomes true */
+	enum mpam_msc_iface	iface;
+	u32			nrdy_usec;
+	cpumask_t		accessibility;
+
+	/*
+	 * probe_lock is only taken during discovery. After discovery these
+	 * properties become read-only and the lists are protected by SRCU.
+	 */
+	struct mutex		probe_lock;
+	unsigned long		ris_idxs;
+	u32			ris_max;
+
+	/* mpam_msc_ris of this component */
+	struct list_head	ris;
+
+	/*
+	 * part_sel_lock protects access to the MSC hardware registers that are
+	 * affected by MPAMCFG_PART_SEL. (including the ID registers that vary
+	 * by RIS).
+	 * If needed, take msc->probe_lock first.
+	 */
+	struct mutex		part_sel_lock;
+
+	void __iomem		*mapped_hwpage;
+	size_t			mapped_hwpage_sz;
+};
+#endif /* MPAM_INTERNAL_H */
-- 
2.43.0

[PATCH v5 11/34] arm_mpam: Add the class and component structures for firmware described ris

[Ben Horgan]

From: James Morse <james.morse@arm.com>

An MSC is a container of resources, each identified by their RIS index.
Some RIS are described by firmware to provide their position in the system.
Others are discovered when the driver probes the hardware.

To configure a resource it needs to be found by its class, e.g. 'L2'.
There are two kinds of grouping, a class is a set of components, which
are visible to user-space as there are likely to be multiple instances
of the L2 cache. (e.g. one per cluster or package)

Add support for creating and destroying structures to allow a hierarchy
of resources to be created.

Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Gavin:
Add warning when can't get CPU affinity
Comment tweaks
if formatting

Changes since v3:
Jonathan:
Code reordering.
Comments.
---
 drivers/resctrl/mpam_devices.c  | 392 +++++++++++++++++++++++++++++++-
 drivers/resctrl/mpam_internal.h |  94 ++++++++
 include/linux/arm_mpam.h        |   5 +
 3 files changed, 490 insertions(+), 1 deletion(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index e097e852f9c3..f1dcf9bb14f2 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -36,6 +36,383 @@ struct srcu_struct mpam_srcu;
  */
 static atomic_t mpam_num_msc;
 
+/*
+ * An MSC is a physical container for controls and monitors, each identified by
+ * their RIS index. These share a base-address, interrupts and some MMIO
+ * registers. A vMSC is a virtual container for RIS in an MSC that control or
+ * monitor the same thing. Members of a vMSC are all RIS in the same MSC, but
+ * not all RIS in an MSC share a vMSC.
+ *
+ * Components are a group of vMSC that control or monitor the same thing but
+ * are from different MSC, so have different base-address, interrupts etc.
+ * Classes are the set components of the same type.
+ *
+ * The features of a vMSC is the union of the RIS it contains.
+ * The features of a Class and Component are the common subset of the vMSC
+ * they contain.
+ *
+ * e.g. The system cache may have bandwidth controls on multiple interfaces,
+ * for regulating traffic from devices independently of traffic from CPUs.
+ * If these are two RIS in one MSC, they will be treated as controlling
+ * different things, and will not share a vMSC/component/class.
+ *
+ * e.g. The L2 may have one MSC and two RIS, one for cache-controls another
+ * for bandwidth. These two RIS are members of the same vMSC.
+ *
+ * e.g. The set of RIS that make up the L2 are grouped as a component. These
+ * are sometimes termed slices. They should be configured the same, as if there
+ * were only one.
+ *
+ * e.g. The SoC probably has more than one L2, each attached to a distinct set
+ * of CPUs. All the L2 components are grouped as a class.
+ *
+ * When creating an MSC, struct mpam_msc is added to the all mpam_all_msc list,
+ * then linked via struct mpam_ris to a vmsc, component and class.
+ * The same MSC may exist under different class->component->vmsc paths, but the
+ * RIS index will be unique.
+ */
+LIST_HEAD(mpam_classes);
+
+/* List of all objects that can be free()d after synchronise_srcu() */
+static LLIST_HEAD(mpam_garbage);
+
+static inline void init_garbage(struct mpam_garbage *garbage)
+{
+	init_llist_node(&garbage->llist);
+}
+
+#define add_to_garbage(x)				\
+do {							\
+	__typeof__(x) _x = (x);				\
+	_x->garbage.to_free = _x;			\
+	llist_add(&_x->garbage.llist, &mpam_garbage);	\
+} while (0)
+
+static void mpam_free_garbage(void)
+{
+	struct mpam_garbage *iter, *tmp;
+	struct llist_node *to_free = llist_del_all(&mpam_garbage);
+
+	if (!to_free)
+		return;
+
+	synchronize_srcu(&mpam_srcu);
+
+	llist_for_each_entry_safe(iter, tmp, to_free, llist) {
+		if (iter->pdev)
+			devm_kfree(&iter->pdev->dev, iter->to_free);
+		else
+			kfree(iter->to_free);
+	}
+}
+
+static struct mpam_class *
+mpam_class_alloc(u8 level_idx, enum mpam_class_types type)
+{
+	struct mpam_class *class;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	class = kzalloc(sizeof(*class), GFP_KERNEL);
+	if (!class)
+		return ERR_PTR(-ENOMEM);
+	init_garbage(&class->garbage);
+
+	INIT_LIST_HEAD_RCU(&class->components);
+	/* Affinity is updated when ris are added */
+	class->level = level_idx;
+	class->type = type;
+	INIT_LIST_HEAD_RCU(&class->classes_list);
+
+	list_add_rcu(&class->classes_list, &mpam_classes);
+
+	return class;
+}
+
+static void mpam_class_destroy(struct mpam_class *class)
+{
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_del_rcu(&class->classes_list);
+	add_to_garbage(class);
+}
+
+static struct mpam_class *
+mpam_class_find(u8 level_idx, enum mpam_class_types type)
+{
+	struct mpam_class *class;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_for_each_entry(class, &mpam_classes, classes_list) {
+		if (class->type == type && class->level == level_idx)
+			return class;
+	}
+
+	return mpam_class_alloc(level_idx, type);
+}
+
+static struct mpam_component *
+mpam_component_alloc(struct mpam_class *class, int id)
+{
+	struct mpam_component *comp;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	comp = kzalloc(sizeof(*comp), GFP_KERNEL);
+	if (!comp)
+		return ERR_PTR(-ENOMEM);
+	init_garbage(&comp->garbage);
+
+	comp->comp_id = id;
+	INIT_LIST_HEAD_RCU(&comp->vmsc);
+	/* Affinity is updated when RIS are added */
+	INIT_LIST_HEAD_RCU(&comp->class_list);
+	comp->class = class;
+
+	list_add_rcu(&comp->class_list, &class->components);
+
+	return comp;
+}
+
+static void mpam_component_destroy(struct mpam_component *comp)
+{
+	struct mpam_class *class = comp->class;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_del_rcu(&comp->class_list);
+	add_to_garbage(comp);
+
+	if (list_empty(&class->components))
+		mpam_class_destroy(class);
+}
+
+static struct mpam_component *
+mpam_component_find(struct mpam_class *class, int id)
+{
+	struct mpam_component *comp;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_for_each_entry(comp, &class->components, class_list) {
+		if (comp->comp_id == id)
+			return comp;
+	}
+
+	return mpam_component_alloc(class, id);
+}
+
+static struct mpam_vmsc *
+mpam_vmsc_alloc(struct mpam_component *comp, struct mpam_msc *msc)
+{
+	struct mpam_vmsc *vmsc;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	vmsc = kzalloc(sizeof(*vmsc), GFP_KERNEL);
+	if (!vmsc)
+		return ERR_PTR(-ENOMEM);
+	init_garbage(&vmsc->garbage);
+
+	INIT_LIST_HEAD_RCU(&vmsc->ris);
+	INIT_LIST_HEAD_RCU(&vmsc->comp_list);
+	vmsc->comp = comp;
+	vmsc->msc = msc;
+
+	list_add_rcu(&vmsc->comp_list, &comp->vmsc);
+
+	return vmsc;
+}
+
+static void mpam_vmsc_destroy(struct mpam_vmsc *vmsc)
+{
+	struct mpam_component *comp = vmsc->comp;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_del_rcu(&vmsc->comp_list);
+	add_to_garbage(vmsc);
+
+	if (list_empty(&comp->vmsc))
+		mpam_component_destroy(comp);
+}
+
+static struct mpam_vmsc *
+mpam_vmsc_find(struct mpam_component *comp, struct mpam_msc *msc)
+{
+	struct mpam_vmsc *vmsc;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_for_each_entry(vmsc, &comp->vmsc, comp_list) {
+		if (vmsc->msc->id == msc->id)
+			return vmsc;
+	}
+
+	return mpam_vmsc_alloc(comp, msc);
+}
+
+/*
+ * The cacheinfo structures are only populated when CPUs are online.
+ * This helper walks the acpi tables to include offline CPUs too.
+ */
+int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
+				   cpumask_t *affinity)
+{
+	return acpi_pptt_get_cpumask_from_cache_id(cache_id, affinity);
+}
+
+/*
+ * cpumask_of_node() only knows about online CPUs. This can't tell us whether
+ * a class is represented on all possible CPUs.
+ */
+static void get_cpumask_from_node_id(u32 node_id, cpumask_t *affinity)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		if (node_id == cpu_to_node(cpu))
+			cpumask_set_cpu(cpu, affinity);
+	}
+}
+
+static int mpam_ris_get_affinity(struct mpam_msc *msc, cpumask_t *affinity,
+				 enum mpam_class_types type,
+				 struct mpam_class *class,
+				 struct mpam_component *comp)
+{
+	int err;
+
+	switch (type) {
+	case MPAM_CLASS_CACHE:
+		err = mpam_get_cpumask_from_cache_id(comp->comp_id, class->level,
+						     affinity);
+		if (err) {
+			dev_warn_once(&msc->pdev->dev,
+				      "Failed to determine CPU affinity\n");
+			return err;
+		}
+
+		if (cpumask_empty(affinity))
+			dev_warn_once(&msc->pdev->dev, "no CPUs associated with cache node\n");
+
+		break;
+	case MPAM_CLASS_MEMORY:
+		get_cpumask_from_node_id(comp->comp_id, affinity);
+		/* affinity may be empty for CPU-less memory nodes */
+		break;
+	case MPAM_CLASS_UNKNOWN:
+		return 0;
+	}
+
+	cpumask_and(affinity, affinity, &msc->accessibility);
+
+	return 0;
+}
+
+static int mpam_ris_create_locked(struct mpam_msc *msc, u8 ris_idx,
+				  enum mpam_class_types type, u8 class_id,
+				  int component_id)
+{
+	int err;
+	struct mpam_vmsc *vmsc;
+	struct mpam_msc_ris *ris;
+	struct mpam_class *class;
+	struct mpam_component *comp;
+	struct platform_device *pdev = msc->pdev;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	if (ris_idx > MPAM_MSC_MAX_NUM_RIS)
+		return -EINVAL;
+
+	if (test_and_set_bit(ris_idx, &msc->ris_idxs))
+		return -EBUSY;
+
+	ris = devm_kzalloc(&msc->pdev->dev, sizeof(*ris), GFP_KERNEL);
+	if (!ris)
+		return -ENOMEM;
+	init_garbage(&ris->garbage);
+	ris->garbage.pdev = pdev;
+
+	class = mpam_class_find(class_id, type);
+	if (IS_ERR(class))
+		return PTR_ERR(class);
+
+	comp = mpam_component_find(class, component_id);
+	if (IS_ERR(comp)) {
+		if (list_empty(&class->components))
+			mpam_class_destroy(class);
+		return PTR_ERR(comp);
+	}
+
+	vmsc = mpam_vmsc_find(comp, msc);
+	if (IS_ERR(vmsc)) {
+		if (list_empty(&comp->vmsc))
+			mpam_component_destroy(comp);
+		return PTR_ERR(vmsc);
+	}
+
+	err = mpam_ris_get_affinity(msc, &ris->affinity, type, class, comp);
+	if (err) {
+		if (list_empty(&vmsc->ris))
+			mpam_vmsc_destroy(vmsc);
+		return err;
+	}
+
+	ris->ris_idx = ris_idx;
+	INIT_LIST_HEAD_RCU(&ris->msc_list);
+	INIT_LIST_HEAD_RCU(&ris->vmsc_list);
+	ris->vmsc = vmsc;
+
+	cpumask_or(&comp->affinity, &comp->affinity, &ris->affinity);
+	cpumask_or(&class->affinity, &class->affinity, &ris->affinity);
+	list_add_rcu(&ris->vmsc_list, &vmsc->ris);
+	list_add_rcu(&ris->msc_list, &msc->ris);
+
+	return 0;
+}
+
+static void mpam_ris_destroy(struct mpam_msc_ris *ris)
+{
+	struct mpam_vmsc *vmsc = ris->vmsc;
+	struct mpam_msc *msc = vmsc->msc;
+	struct mpam_component *comp = vmsc->comp;
+	struct mpam_class *class = comp->class;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	/*
+	 * It is assumed affinities don't overlap. If they do the class becomes
+	 * unusable immediately.
+	 */
+	cpumask_andnot(&class->affinity, &class->affinity, &ris->affinity);
+	cpumask_andnot(&comp->affinity, &comp->affinity, &ris->affinity);
+	clear_bit(ris->ris_idx, &msc->ris_idxs);
+	list_del_rcu(&ris->msc_list);
+	list_del_rcu(&ris->vmsc_list);
+	add_to_garbage(ris);
+
+	if (list_empty(&vmsc->ris))
+		mpam_vmsc_destroy(vmsc);
+}
+
+int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
+		    enum mpam_class_types type, u8 class_id, int component_id)
+{
+	int err;
+
+	mutex_lock(&mpam_list_lock);
+	err = mpam_ris_create_locked(msc, ris_idx, type, class_id,
+				     component_id);
+	mutex_unlock(&mpam_list_lock);
+	if (err)
+		mpam_free_garbage();
+
+	return err;
+}
+
 /*
  * An MSC can control traffic from a set of CPUs, but may only be accessible
  * from a (hopefully wider) set of CPUs. The common reason for this is power
@@ -56,14 +433,25 @@ static void update_msc_accessibility(struct mpam_msc *msc)
 		acpi_pptt_get_cpus_from_container(affinity_id, &msc->accessibility);
 }
 
+/*
+ * There are two ways of reaching a struct mpam_msc_ris. Via the
+ * class->component->vmsc->ris, or via the msc.
+ * When destroying the msc, the other side needs unlinking and cleaning up too.
+ */
 static void mpam_msc_destroy(struct mpam_msc *msc)
 {
 	struct platform_device *pdev = msc->pdev;
+	struct mpam_msc_ris *ris, *tmp;
 
 	lockdep_assert_held(&mpam_list_lock);
 
+	list_for_each_entry_safe(ris, tmp, &msc->ris, msc_list)
+		mpam_ris_destroy(ris);
+
 	list_del_rcu(&msc->all_msc_list);
 	platform_set_drvdata(pdev, NULL);
+
+	add_to_garbage(msc);
 }
 
 static void mpam_msc_drv_remove(struct platform_device *pdev)
@@ -74,7 +462,7 @@ static void mpam_msc_drv_remove(struct platform_device *pdev)
 	mpam_msc_destroy(msc);
 	mutex_unlock(&mpam_list_lock);
 
-	synchronize_srcu(&mpam_srcu);
+	mpam_free_garbage();
 }
 
 static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
@@ -90,6 +478,8 @@ static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
 	msc = devm_kzalloc(&pdev->dev, sizeof(*msc), GFP_KERNEL);
 	if (!msc)
 		return ERR_PTR(-ENOMEM);
+	init_garbage(&msc->garbage);
+	msc->garbage.pdev = pdev;
 
 	err = devm_mutex_init(dev, &msc->probe_lock);
 	if (err)
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 540066903eca..8f7a28d2c021 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -7,11 +7,30 @@
 #include <linux/arm_mpam.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/llist.h>
 #include <linux/mutex.h>
+#include <linux/srcu.h>
 #include <linux/types.h>
 
+#define MPAM_MSC_MAX_NUM_RIS	16
+
 struct platform_device;
 
+/*
+ * Structures protected by SRCU may not be freed for a surprising amount of
+ * time (especially if perf is running). To ensure the MPAM error interrupt can
+ * tear down all the structures, build a list of objects that can be garbage
+ * collected once synchronize_srcu() has returned.
+ * If pdev is non-NULL, use devm_kfree().
+ */
+struct mpam_garbage {
+	/* member of mpam_garbage */
+	struct llist_node	llist;
+
+	void			*to_free;
+	struct platform_device	*pdev;
+};
+
 struct mpam_msc {
 	/* member of mpam_all_msc */
 	struct list_head	all_msc_list;
@@ -45,5 +64,80 @@ struct mpam_msc {
 
 	void __iomem		*mapped_hwpage;
 	size_t			mapped_hwpage_sz;
+
+	struct mpam_garbage	garbage;
+};
+
+struct mpam_class {
+	/* mpam_components in this class */
+	struct list_head	components;
+
+	cpumask_t		affinity;
+
+	u8			level;
+	enum mpam_class_types	type;
+
+	/* member of mpam_classes */
+	struct list_head	classes_list;
+
+	struct mpam_garbage	garbage;
+};
+
+struct mpam_component {
+	u32			comp_id;
+
+	/* mpam_vmsc in this component */
+	struct list_head	vmsc;
+
+	cpumask_t		affinity;
+
+	/* member of mpam_class:components */
+	struct list_head	class_list;
+
+	/* parent: */
+	struct mpam_class	*class;
+
+	struct mpam_garbage	garbage;
+};
+
+struct mpam_vmsc {
+	/* member of mpam_component:vmsc_list */
+	struct list_head	comp_list;
+
+	/* mpam_msc_ris in this vmsc */
+	struct list_head	ris;
+
+	/* All RIS in this vMSC are members of this MSC */
+	struct mpam_msc		*msc;
+
+	/* parent: */
+	struct mpam_component	*comp;
+
+	struct mpam_garbage	garbage;
+};
+
+struct mpam_msc_ris {
+	u8			ris_idx;
+
+	cpumask_t		affinity;
+
+	/* member of mpam_vmsc:ris */
+	struct list_head	vmsc_list;
+
+	/* member of mpam_msc:ris */
+	struct list_head	msc_list;
+
+	/* parent: */
+	struct mpam_vmsc	*vmsc;
+
+	struct mpam_garbage	garbage;
 };
+
+/* List of all classes - protected by srcu*/
+extern struct srcu_struct mpam_srcu;
+extern struct list_head mpam_classes;
+
+int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
+				   cpumask_t *affinity);
+
 #endif /* MPAM_INTERNAL_H */
diff --git a/include/linux/arm_mpam.h b/include/linux/arm_mpam.h
index 4b7f335181e0..13a8ac5c2cbd 100644
--- a/include/linux/arm_mpam.h
+++ b/include/linux/arm_mpam.h
@@ -37,11 +37,16 @@ static inline int acpi_mpam_parse_resources(struct mpam_msc *msc,
 static inline int acpi_mpam_count_msc(void) { return -EINVAL; }
 #endif
 
+#ifdef CONFIG_ARM64_MPAM_DRIVER
+int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
+		    enum mpam_class_types type, u8 class_id, int component_id);
+#else
 static inline int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
 				  enum mpam_class_types type, u8 class_id,
 				  int component_id)
 {
 	return -EINVAL;
 }
+#endif
 
 #endif /* __LINUX_ARM_MPAM_H */
-- 
2.43.0

[PATCH v5 12/34] arm_mpam: Add MPAM MSC register layout definitions

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Memory Partitioning and Monitoring (MPAM) has memory mapped devices
(MSCs) with an identity/configuration page.

Add the definitions for these registers as offset within the page(s).

Link: https://developer.arm.com/documentation/ihi0099/aa/
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Add tags - thanks!
Consistent naming of long counter variants (Jonathan)
---
 drivers/resctrl/mpam_internal.h | 267 ++++++++++++++++++++++++++++++++
 1 file changed, 267 insertions(+)

diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 8f7a28d2c021..51f791cc207b 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -140,4 +140,271 @@ extern struct list_head mpam_classes;
 int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
 				   cpumask_t *affinity);
 
+/*
+ * MPAM MSCs have the following register layout. See:
+ * Arm Memory System Resource Partitioning and Monitoring (MPAM) System
+ * Component Specification.
+ * https://developer.arm.com/documentation/ihi0099/aa/
+ */
+#define MPAM_ARCHITECTURE_V1    0x10
+
+/* Memory mapped control pages */
+/* ID Register offsets in the memory mapped page */
+#define MPAMF_IDR		0x0000  /* features id register */
+#define MPAMF_IIDR		0x0018  /* implementer id register */
+#define MPAMF_AIDR		0x0020  /* architectural id register */
+#define MPAMF_IMPL_IDR		0x0028  /* imp-def partitioning */
+#define MPAMF_CPOR_IDR		0x0030  /* cache-portion partitioning */
+#define MPAMF_CCAP_IDR		0x0038  /* cache-capacity partitioning */
+#define MPAMF_MBW_IDR		0x0040  /* mem-bw partitioning */
+#define MPAMF_PRI_IDR		0x0048  /* priority partitioning */
+#define MPAMF_MSMON_IDR		0x0080  /* performance monitoring features */
+#define MPAMF_CSUMON_IDR	0x0088  /* cache-usage monitor */
+#define MPAMF_MBWUMON_IDR	0x0090  /* mem-bw usage monitor */
+#define MPAMF_PARTID_NRW_IDR	0x0050  /* partid-narrowing */
+
+/* Configuration and Status Register offsets in the memory mapped page */
+#define MPAMCFG_PART_SEL	0x0100  /* partid to configure */
+#define MPAMCFG_CPBM		0x1000  /* cache-portion config */
+#define MPAMCFG_CMAX		0x0108  /* cache-capacity config */
+#define MPAMCFG_CMIN		0x0110  /* cache-capacity config */
+#define MPAMCFG_CASSOC		0x0118  /* cache-associativity config */
+#define MPAMCFG_MBW_MIN		0x0200  /* min mem-bw config */
+#define MPAMCFG_MBW_MAX		0x0208  /* max mem-bw config */
+#define MPAMCFG_MBW_WINWD	0x0220  /* mem-bw accounting window config */
+#define MPAMCFG_MBW_PBM		0x2000  /* mem-bw portion bitmap config */
+#define MPAMCFG_PRI		0x0400  /* priority partitioning config */
+#define MPAMCFG_MBW_PROP	0x0500  /* mem-bw stride config */
+#define MPAMCFG_INTPARTID	0x0600  /* partid-narrowing config */
+
+#define MSMON_CFG_MON_SEL	0x0800  /* monitor selector */
+#define MSMON_CFG_CSU_FLT	0x0810  /* cache-usage monitor filter */
+#define MSMON_CFG_CSU_CTL	0x0818  /* cache-usage monitor config */
+#define MSMON_CFG_MBWU_FLT	0x0820  /* mem-bw monitor filter */
+#define MSMON_CFG_MBWU_CTL	0x0828  /* mem-bw monitor config */
+#define MSMON_CSU		0x0840  /* current cache-usage */
+#define MSMON_CSU_CAPTURE	0x0848  /* last cache-usage value captured */
+#define MSMON_MBWU		0x0860  /* current mem-bw usage value */
+#define MSMON_MBWU_CAPTURE	0x0868  /* last mem-bw value captured */
+#define MSMON_MBWU_L		0x0880  /* current long mem-bw usage value */
+#define MSMON_MBWU_L_CAPTURE	0x0890  /* last long mem-bw value captured */
+#define MSMON_CAPT_EVNT		0x0808  /* signal a capture event */
+#define MPAMF_ESR		0x00F8  /* error status register */
+#define MPAMF_ECR		0x00F0  /* error control register */
+
+/* MPAMF_IDR - MPAM features ID register */
+#define MPAMF_IDR_PARTID_MAX		GENMASK(15, 0)
+#define MPAMF_IDR_PMG_MAX		GENMASK(23, 16)
+#define MPAMF_IDR_HAS_CCAP_PART		BIT(24)
+#define MPAMF_IDR_HAS_CPOR_PART		BIT(25)
+#define MPAMF_IDR_HAS_MBW_PART		BIT(26)
+#define MPAMF_IDR_HAS_PRI_PART		BIT(27)
+#define MPAMF_IDR_EXT			BIT(28)
+#define MPAMF_IDR_HAS_IMPL_IDR		BIT(29)
+#define MPAMF_IDR_HAS_MSMON		BIT(30)
+#define MPAMF_IDR_HAS_PARTID_NRW	BIT(31)
+#define MPAMF_IDR_HAS_RIS		BIT(32)
+#define MPAMF_IDR_HAS_EXTD_ESR		BIT(38)
+#define MPAMF_IDR_HAS_ESR		BIT(39)
+#define MPAMF_IDR_RIS_MAX		GENMASK(59, 56)
+
+/* MPAMF_MSMON_IDR - MPAM performance monitoring ID register */
+#define MPAMF_MSMON_IDR_MSMON_CSU		BIT(16)
+#define MPAMF_MSMON_IDR_MSMON_MBWU		BIT(17)
+#define MPAMF_MSMON_IDR_HAS_LOCAL_CAPT_EVNT	BIT(31)
+
+/* MPAMF_CPOR_IDR - MPAM features cache portion partitioning ID register */
+#define MPAMF_CPOR_IDR_CPBM_WD			GENMASK(15, 0)
+
+/* MPAMF_CCAP_IDR - MPAM features cache capacity partitioning ID register */
+#define MPAMF_CCAP_IDR_CMAX_WD			GENMASK(5, 0)
+#define MPAMF_CCAP_IDR_CASSOC_WD		GENMASK(12, 8)
+#define MPAMF_CCAP_IDR_HAS_CASSOC		BIT(28)
+#define MPAMF_CCAP_IDR_HAS_CMIN			BIT(29)
+#define MPAMF_CCAP_IDR_NO_CMAX			BIT(30)
+#define MPAMF_CCAP_IDR_HAS_CMAX_SOFTLIM		BIT(31)
+
+/* MPAMF_MBW_IDR - MPAM features memory bandwidth partitioning ID register */
+#define MPAMF_MBW_IDR_BWA_WD		GENMASK(5, 0)
+#define MPAMF_MBW_IDR_HAS_MIN		BIT(10)
+#define MPAMF_MBW_IDR_HAS_MAX		BIT(11)
+#define MPAMF_MBW_IDR_HAS_PBM		BIT(12)
+#define MPAMF_MBW_IDR_HAS_PROP		BIT(13)
+#define MPAMF_MBW_IDR_WINDWR		BIT(14)
+#define MPAMF_MBW_IDR_BWPBM_WD		GENMASK(28, 16)
+
+/* MPAMF_PRI_IDR - MPAM features priority partitioning ID register */
+#define MPAMF_PRI_IDR_HAS_INTPRI	BIT(0)
+#define MPAMF_PRI_IDR_INTPRI_0_IS_LOW	BIT(1)
+#define MPAMF_PRI_IDR_INTPRI_WD		GENMASK(9, 4)
+#define MPAMF_PRI_IDR_HAS_DSPRI		BIT(16)
+#define MPAMF_PRI_IDR_DSPRI_0_IS_LOW	BIT(17)
+#define MPAMF_PRI_IDR_DSPRI_WD		GENMASK(25, 20)
+
+/* MPAMF_CSUMON_IDR - MPAM cache storage usage monitor ID register */
+#define MPAMF_CSUMON_IDR_NUM_MON	GENMASK(15, 0)
+#define MPAMF_CSUMON_IDR_HAS_OFLOW_CAPT	BIT(24)
+#define MPAMF_CSUMON_IDR_HAS_CEVNT_OFLW	BIT(25)
+#define MPAMF_CSUMON_IDR_HAS_OFSR	BIT(26)
+#define MPAMF_CSUMON_IDR_HAS_OFLOW_LNKG	BIT(27)
+#define MPAMF_CSUMON_IDR_HAS_XCL	BIT(29)
+#define MPAMF_CSUMON_IDR_CSU_RO		BIT(30)
+#define MPAMF_CSUMON_IDR_HAS_CAPTURE	BIT(31)
+
+/* MPAMF_MBWUMON_IDR - MPAM memory bandwidth usage monitor ID register */
+#define MPAMF_MBWUMON_IDR_NUM_MON	GENMASK(15, 0)
+#define MPAMF_MBWUMON_IDR_HAS_RWBW	BIT(28)
+#define MPAMF_MBWUMON_IDR_LWD		BIT(29)
+#define MPAMF_MBWUMON_IDR_HAS_LONG	BIT(30)
+#define MPAMF_MBWUMON_IDR_HAS_CAPTURE	BIT(31)
+
+/* MPAMF_PARTID_NRW_IDR - MPAM PARTID narrowing ID register */
+#define MPAMF_PARTID_NRW_IDR_INTPARTID_MAX	GENMASK(15, 0)
+
+/* MPAMF_IIDR - MPAM implementation ID register */
+#define MPAMF_IIDR_IMPLEMENTER	GENMASK(11, 0)
+#define MPAMF_IIDR_REVISION	GENMASK(15, 12)
+#define MPAMF_IIDR_VARIANT	GENMASK(19, 16)
+#define MPAMF_IIDR_PRODUCTID	GENMASK(31, 20)
+
+/* MPAMF_AIDR - MPAM architecture ID register */
+#define MPAMF_AIDR_ARCH_MINOR_REV	GENMASK(3, 0)
+#define MPAMF_AIDR_ARCH_MAJOR_REV	GENMASK(7, 4)
+
+/* MPAMCFG_PART_SEL - MPAM partition configuration selection register */
+#define MPAMCFG_PART_SEL_PARTID_SEL	GENMASK(15, 0)
+#define MPAMCFG_PART_SEL_INTERNAL	BIT(16)
+#define MPAMCFG_PART_SEL_RIS		GENMASK(27, 24)
+
+/* MPAMCFG_CASSOC - MPAM cache maximum associativity partition configuration register */
+#define MPAMCFG_CASSOC_CASSOC		GENMASK(15, 0)
+
+/* MPAMCFG_CMAX - MPAM cache capacity configuration register */
+#define MPAMCFG_CMAX_SOFTLIM		BIT(31)
+#define MPAMCFG_CMAX_CMAX		GENMASK(15, 0)
+
+/* MPAMCFG_CMIN - MPAM cache capacity configuration register */
+#define MPAMCFG_CMIN_CMIN		GENMASK(15, 0)
+
+/*
+ * MPAMCFG_MBW_MIN - MPAM memory minimum bandwidth partitioning configuration
+ *                   register
+ */
+#define MPAMCFG_MBW_MIN_MIN		GENMASK(15, 0)
+
+/*
+ * MPAMCFG_MBW_MAX - MPAM memory maximum bandwidth partitioning configuration
+ *                   register
+ */
+#define MPAMCFG_MBW_MAX_MAX		GENMASK(15, 0)
+#define MPAMCFG_MBW_MAX_HARDLIM		BIT(31)
+
+/*
+ * MPAMCFG_MBW_WINWD - MPAM memory bandwidth partitioning window width
+ *                     register
+ */
+#define MPAMCFG_MBW_WINWD_US_FRAC	GENMASK(7, 0)
+#define MPAMCFG_MBW_WINWD_US_INT	GENMASK(23, 8)
+
+/* MPAMCFG_PRI - MPAM priority partitioning configuration register */
+#define MPAMCFG_PRI_INTPRI		GENMASK(15, 0)
+#define MPAMCFG_PRI_DSPRI		GENMASK(31, 16)
+
+/*
+ * MPAMCFG_MBW_PROP - Memory bandwidth proportional stride partitioning
+ *                    configuration register
+ */
+#define MPAMCFG_MBW_PROP_STRIDEM1	GENMASK(15, 0)
+#define MPAMCFG_MBW_PROP_EN		BIT(31)
+
+/*
+ * MPAMCFG_INTPARTID - MPAM internal partition narrowing configuration register
+ */
+#define MPAMCFG_INTPARTID_INTPARTID	GENMASK(15, 0)
+#define MPAMCFG_INTPARTID_INTERNAL	BIT(16)
+
+/* MSMON_CFG_MON_SEL - Memory system performance monitor selection register */
+#define MSMON_CFG_MON_SEL_MON_SEL	GENMASK(15, 0)
+#define MSMON_CFG_MON_SEL_RIS		GENMASK(27, 24)
+
+/* MPAMF_ESR - MPAM Error Status Register */
+#define MPAMF_ESR_PARTID_MON	GENMASK(15, 0)
+#define MPAMF_ESR_PMG		GENMASK(23, 16)
+#define MPAMF_ESR_ERRCODE	GENMASK(27, 24)
+#define MPAMF_ESR_OVRWR		BIT(31)
+#define MPAMF_ESR_RIS		GENMASK(35, 32)
+
+/* MPAMF_ECR - MPAM Error Control Register */
+#define MPAMF_ECR_INTEN		BIT(0)
+
+/* Error conditions in accessing memory mapped registers */
+#define MPAM_ERRCODE_NONE			0
+#define MPAM_ERRCODE_PARTID_SEL_RANGE		1
+#define MPAM_ERRCODE_REQ_PARTID_RANGE		2
+#define MPAM_ERRCODE_MSMONCFG_ID_RANGE		3
+#define MPAM_ERRCODE_REQ_PMG_RANGE		4
+#define MPAM_ERRCODE_MONITOR_RANGE		5
+#define MPAM_ERRCODE_INTPARTID_RANGE		6
+#define MPAM_ERRCODE_UNEXPECTED_INTERNAL	7
+#define MPAM_ERRCODE_UNDEFINED_RIS_PART_SEL	8
+#define MPAM_ERRCODE_RIS_NO_CONTROL		9
+#define MPAM_ERRCODE_UNDEFINED_RIS_MON_SEL	10
+#define MPAM_ERRCODE_RIS_NO_MONITOR		11
+
+/*
+ * MSMON_CFG_CSU_CTL - Memory system performance monitor configure cache storage
+ *                    usage monitor control register
+ * MSMON_CFG_MBWU_CTL - Memory system performance monitor configure memory
+ *                     bandwidth usage monitor control register
+ */
+#define MSMON_CFG_x_CTL_TYPE			GENMASK(7, 0)
+#define MSMON_CFG_MBWU_CTL_OFLOW_STATUS_L	BIT(15)
+#define MSMON_CFG_x_CTL_MATCH_PARTID		BIT(16)
+#define MSMON_CFG_x_CTL_MATCH_PMG		BIT(17)
+#define MSMON_CFG_MBWU_CTL_SCLEN		BIT(19)
+#define MSMON_CFG_x_CTL_SUBTYPE			GENMASK(22, 20)
+#define MSMON_CFG_x_CTL_OFLOW_FRZ		BIT(24)
+#define MSMON_CFG_x_CTL_OFLOW_INTR		BIT(25)
+#define MSMON_CFG_x_CTL_OFLOW_STATUS		BIT(26)
+#define MSMON_CFG_x_CTL_CAPT_RESET		BIT(27)
+#define MSMON_CFG_x_CTL_CAPT_EVNT		GENMASK(30, 28)
+#define MSMON_CFG_x_CTL_EN			BIT(31)
+
+#define MSMON_CFG_MBWU_CTL_TYPE_MBWU		0x42
+#define MSMON_CFG_CSU_CTL_TYPE_CSU		0x43
+
+/*
+ * MSMON_CFG_CSU_FLT -  Memory system performance monitor configure cache storage
+ *                      usage monitor filter register
+ * MSMON_CFG_MBWU_FLT - Memory system performance monitor configure memory
+ *                      bandwidth usage monitor filter register
+ */
+#define MSMON_CFG_x_FLT_PARTID			GENMASK(15, 0)
+#define MSMON_CFG_x_FLT_PMG			GENMASK(23, 16)
+
+#define MSMON_CFG_MBWU_FLT_RWBW			GENMASK(31, 30)
+#define MSMON_CFG_CSU_FLT_XCL			BIT(31)
+
+/*
+ * MSMON_CSU - Memory system performance monitor cache storage usage monitor
+ *            register
+ * MSMON_CSU_CAPTURE -  Memory system performance monitor cache storage usage
+ *                     capture register
+ * MSMON_MBWU  - Memory system performance monitor memory bandwidth usage
+ *               monitor register
+ * MSMON_MBWU_CAPTURE - Memory system performance monitor memory bandwidth usage
+ *                     capture register
+ */
+#define MSMON___VALUE		GENMASK(30, 0)
+#define MSMON___NRDY		BIT(31)
+#define MSMON___L_NRDY		BIT(63)
+#define MSMON___L_VALUE		GENMASK(43, 0)
+#define MSMON___LWD_VALUE	GENMASK(62, 0)
+
+/*
+ * MSMON_CAPT_EVNT - Memory system performance monitoring capture event
+ *                  generation register
+ */
+#define MSMON_CAPT_EVNT_NOW	BIT(0)
+
 #endif /* MPAM_INTERNAL_H */
-- 
2.43.0

[PATCH v5 13/34] arm_mpam: Add cpuhp callbacks to probe MSC hardware

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Because an MSC can only by accessed from the CPUs in its cpu-affinity
set we need to be running on one of those CPUs to probe the MSC
hardware.

Do this work in the cpuhp callback. Probing the hardware will only
happen before MPAM is enabled, walk all the MSCs and probe those we can
reach that haven't already been probed as each CPU's online call is made.

This adds the low-level MSC register read accessors.

Once all MSCs reported by the firmware have been probed from a CPU in
their respective cpu-affinity set, the probe-time cpuhp callbacks are
replaced.  The replacement callbacks will ultimately need to handle
save/restore of the runtime MSC state across power transitions, but for
now there is nothing to do in them: so do nothing.

The architecture's context switch code will be enabled by a static-key,
this can be set by mpam_enable(), but must be done from process context,
not a cpuhp callback because both take the cpuhp lock.
Whenever a new MSC has been probed, the mpam_enable() work is scheduled
to test if all the MSCs have been probed. If probing fails, mpam_disable()
is scheduled to unregister the cpuhp callbacks and free memory.

CC: Lecopzer Chen <lecopzerc@nvidia.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Add a tag - thanks!
Include tidying
---
 drivers/resctrl/mpam_devices.c  | 176 +++++++++++++++++++++++++++++++-
 drivers/resctrl/mpam_internal.h |   5 +
 2 files changed, 180 insertions(+), 1 deletion(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index f1dcf9bb14f2..51284f55ae9b 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -4,8 +4,10 @@
 #define pr_fmt(fmt) "%s:%s: " fmt, KBUILD_MODNAME, __func__
 
 #include <linux/acpi.h>
+#include <linux/atomic.h>
 #include <linux/arm_mpam.h>
 #include <linux/cacheinfo.h>
+#include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/device.h>
 #include <linux/errno.h>
@@ -17,6 +19,7 @@
 #include <linux/printk.h>
 #include <linux/srcu.h>
 #include <linux/types.h>
+#include <linux/workqueue.h>
 
 #include "mpam_internal.h"
 
@@ -36,6 +39,25 @@ struct srcu_struct mpam_srcu;
  */
 static atomic_t mpam_num_msc;
 
+static int mpam_cpuhp_state;
+static DEFINE_MUTEX(mpam_cpuhp_state_lock);
+
+/*
+ * mpam is enabled once all devices have been probed from CPU online callbacks,
+ * scheduled via this work_struct. If access to an MSC depends on a CPU that
+ * was not brought online at boot, this can happen surprisingly late.
+ */
+static DECLARE_WORK(mpam_enable_work, &mpam_enable);
+
+/*
+ * All mpam error interrupts indicate a software bug. On receipt, disable the
+ * driver.
+ */
+static DECLARE_WORK(mpam_broken_work, &mpam_disable);
+
+/* When mpam is disabled, the printed reason to aid debugging */
+static char *mpam_disable_reason;
+
 /*
  * An MSC is a physical container for controls and monitors, each identified by
  * their RIS index. These share a base-address, interrupts and some MMIO
@@ -106,6 +128,21 @@ static void mpam_free_garbage(void)
 	}
 }
 
+static u32 __mpam_read_reg(struct mpam_msc *msc, u16 reg)
+{
+	WARN_ON_ONCE(!cpumask_test_cpu(smp_processor_id(), &msc->accessibility));
+
+	return readl_relaxed(msc->mapped_hwpage + reg);
+}
+
+static inline u32 _mpam_read_partsel_reg(struct mpam_msc *msc, u16 reg)
+{
+	lockdep_assert_held_once(&msc->part_sel_lock);
+	return __mpam_read_reg(msc, reg);
+}
+
+#define mpam_read_partsel_reg(msc, reg) _mpam_read_partsel_reg(msc, MPAMF_##reg)
+
 static struct mpam_class *
 mpam_class_alloc(u8 level_idx, enum mpam_class_types type)
 {
@@ -413,6 +450,86 @@ int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
 	return err;
 }
 
+static int mpam_msc_hw_probe(struct mpam_msc *msc)
+{
+	u64 idr;
+	struct device *dev = &msc->pdev->dev;
+
+	lockdep_assert_held(&msc->probe_lock);
+
+	idr = __mpam_read_reg(msc, MPAMF_AIDR);
+	if ((idr & MPAMF_AIDR_ARCH_MAJOR_REV) != MPAM_ARCHITECTURE_V1) {
+		dev_err_once(dev, "MSC does not match MPAM architecture v1.x\n");
+		return -EIO;
+	}
+
+	msc->probed = true;
+
+	return 0;
+}
+
+static int mpam_cpu_online(unsigned int cpu)
+{
+	return 0;
+}
+
+/* Before mpam is enabled, try to probe new MSC */
+static int mpam_discovery_cpu_online(unsigned int cpu)
+{
+	int err = 0;
+	struct mpam_msc *msc;
+	bool new_device_probed = false;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		if (!cpumask_test_cpu(cpu, &msc->accessibility))
+			continue;
+
+		mutex_lock(&msc->probe_lock);
+		if (!msc->probed)
+			err = mpam_msc_hw_probe(msc);
+		mutex_unlock(&msc->probe_lock);
+
+		if (err)
+			break;
+		new_device_probed = true;
+	}
+
+	if (new_device_probed && !err)
+		schedule_work(&mpam_enable_work);
+	if (err) {
+		mpam_disable_reason = "error during probing";
+		schedule_work(&mpam_broken_work);
+	}
+
+	return err;
+}
+
+static int mpam_cpu_offline(unsigned int cpu)
+{
+	return 0;
+}
+
+static void mpam_register_cpuhp_callbacks(int (*online)(unsigned int online),
+					  int (*offline)(unsigned int offline),
+					  char *name)
+{
+	mutex_lock(&mpam_cpuhp_state_lock);
+	if (mpam_cpuhp_state) {
+		cpuhp_remove_state(mpam_cpuhp_state);
+		mpam_cpuhp_state = 0;
+	}
+
+	mpam_cpuhp_state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, name, online,
+					     offline);
+	if (mpam_cpuhp_state <= 0) {
+		pr_err("Failed to register cpuhp callbacks");
+		mpam_cpuhp_state = 0;
+	}
+	mutex_unlock(&mpam_cpuhp_state_lock);
+}
+
 /*
  * An MSC can control traffic from a set of CPUs, but may only be accessible
  * from a (hopefully wider) set of CPUs. The common reason for this is power
@@ -549,7 +666,8 @@ static int mpam_msc_drv_probe(struct platform_device *pdev)
 	}
 
 	if (atomic_add_return(1, &mpam_num_msc) == fw_num_msc)
-		pr_info("Discovered all MSCs\n");
+		mpam_register_cpuhp_callbacks(mpam_discovery_cpu_online, NULL,
+					      "mpam:drv_probe");
 
 	return 0;
 }
@@ -562,6 +680,62 @@ static struct platform_driver mpam_msc_driver = {
 	.remove = mpam_msc_drv_remove,
 };
 
+static void mpam_enable_once(void)
+{
+	mpam_register_cpuhp_callbacks(mpam_cpu_online, mpam_cpu_offline,
+				      "mpam:online");
+
+	pr_info("MPAM enabled\n");
+}
+
+void mpam_disable(struct work_struct *ignored)
+{
+	struct mpam_msc *msc, *tmp;
+
+	mutex_lock(&mpam_cpuhp_state_lock);
+	if (mpam_cpuhp_state) {
+		cpuhp_remove_state(mpam_cpuhp_state);
+		mpam_cpuhp_state = 0;
+	}
+	mutex_unlock(&mpam_cpuhp_state_lock);
+
+	mutex_lock(&mpam_list_lock);
+	list_for_each_entry_safe(msc, tmp, &mpam_all_msc, all_msc_list)
+		mpam_msc_destroy(msc);
+	mutex_unlock(&mpam_list_lock);
+	mpam_free_garbage();
+
+	pr_err_once("MPAM disabled due to %s\n", mpam_disable_reason);
+}
+
+/*
+ * Enable mpam once all devices have been probed.
+ * Scheduled by mpam_discovery_cpu_online() once all devices have been created.
+ * Also scheduled when new devices are probed when new CPUs come online.
+ */
+void mpam_enable(struct work_struct *work)
+{
+	static atomic_t once;
+	struct mpam_msc *msc;
+	bool all_devices_probed = true;
+
+	/* Have we probed all the hw devices? */
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		mutex_lock(&msc->probe_lock);
+		if (!msc->probed)
+			all_devices_probed = false;
+		mutex_unlock(&msc->probe_lock);
+
+		if (!all_devices_probed)
+			break;
+	}
+
+	if (all_devices_probed && !atomic_fetch_inc(&once))
+		mpam_enable_once();
+}
+
 static int __init mpam_msc_driver_init(void)
 {
 	if (!system_supports_mpam())
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 51f791cc207b..4e1538d29783 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -48,6 +48,7 @@ struct mpam_msc {
 	 * properties become read-only and the lists are protected by SRCU.
 	 */
 	struct mutex		probe_lock;
+	bool			probed;
 	unsigned long		ris_idxs;
 	u32			ris_max;
 
@@ -137,6 +138,10 @@ struct mpam_msc_ris {
 extern struct srcu_struct mpam_srcu;
 extern struct list_head mpam_classes;
 
+/* Scheduled work callback to enable mpam once all MSC have been probed */
+void mpam_enable(struct work_struct *work);
+void mpam_disable(struct work_struct *work);
+
 int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
 				   cpumask_t *affinity);
 
-- 
2.43.0

[PATCH v5 14/34] arm_mpam: Probe hardware to find the supported partid/pmg values

[Ben Horgan]

From: James Morse <james.morse@arm.com>

CPUs can generate traffic with a range of PARTID and PMG values,
but each MSC may also have its own maximum size for these fields.
Before MPAM can be used, the driver needs to probe each RIS on
each MSC, to find the system-wide smallest value that can be used.
The limits from requestors (e.g. CPUs) also need taking into account.

While doing this, RIS entries that firmware didn't describe are created
under MPAM_CLASS_UNKNOWN.

This adds the low level MSC write accessors.

While we're here, implement the mpam_register_requestor() call
for the arch code to register the CPU limits. Future callers of this
will tell us about the SMMU and ITS.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
From Jonathan:
Stray comma in printk
Unnecessary braces
---
 drivers/resctrl/mpam_devices.c  | 148 +++++++++++++++++++++++++++++++-
 drivers/resctrl/mpam_internal.h |   6 ++
 include/linux/arm_mpam.h        |  14 +++
 3 files changed, 167 insertions(+), 1 deletion(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 51284f55ae9b..ac1c770cea35 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -6,6 +6,7 @@
 #include <linux/acpi.h>
 #include <linux/atomic.h>
 #include <linux/arm_mpam.h>
+#include <linux/bitfield.h>
 #include <linux/cacheinfo.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
@@ -42,6 +43,15 @@ static atomic_t mpam_num_msc;
 static int mpam_cpuhp_state;
 static DEFINE_MUTEX(mpam_cpuhp_state_lock);
 
+/*
+ * The smallest common values for any CPU or MSC in the system.
+ * Generating traffic outside this range will result in screaming interrupts.
+ */
+u16 mpam_partid_max;
+u8 mpam_pmg_max;
+static bool partid_max_init, partid_max_published;
+static DEFINE_SPINLOCK(partid_max_lock);
+
 /*
  * mpam is enabled once all devices have been probed from CPU online callbacks,
  * scheduled via this work_struct. If access to an MSC depends on a CPU that
@@ -143,6 +153,70 @@ static inline u32 _mpam_read_partsel_reg(struct mpam_msc *msc, u16 reg)
 
 #define mpam_read_partsel_reg(msc, reg) _mpam_read_partsel_reg(msc, MPAMF_##reg)
 
+static void __mpam_write_reg(struct mpam_msc *msc, u16 reg, u32 val)
+{
+	WARN_ON_ONCE(reg + sizeof(u32) >= msc->mapped_hwpage_sz);
+	WARN_ON_ONCE(!cpumask_test_cpu(smp_processor_id(), &msc->accessibility));
+
+	writel_relaxed(val, msc->mapped_hwpage + reg);
+}
+
+static inline void _mpam_write_partsel_reg(struct mpam_msc *msc, u16 reg, u32 val)
+{
+	lockdep_assert_held_once(&msc->part_sel_lock);
+	__mpam_write_reg(msc, reg, val);
+}
+
+#define mpam_write_partsel_reg(msc, reg, val)  _mpam_write_partsel_reg(msc, MPAMCFG_##reg, val)
+
+static u64 mpam_msc_read_idr(struct mpam_msc *msc)
+{
+	u64 idr_high = 0, idr_low;
+
+	lockdep_assert_held(&msc->part_sel_lock);
+
+	idr_low = mpam_read_partsel_reg(msc, IDR);
+	if (FIELD_GET(MPAMF_IDR_EXT, idr_low))
+		idr_high = mpam_read_partsel_reg(msc, IDR + 4);
+
+	return (idr_high << 32) | idr_low;
+}
+
+static void __mpam_part_sel_raw(u32 partsel, struct mpam_msc *msc)
+{
+	lockdep_assert_held(&msc->part_sel_lock);
+
+	mpam_write_partsel_reg(msc, PART_SEL, partsel);
+}
+
+static void __mpam_part_sel(u8 ris_idx, u16 partid, struct mpam_msc *msc)
+{
+	u32 partsel = FIELD_PREP(MPAMCFG_PART_SEL_RIS, ris_idx) |
+		      FIELD_PREP(MPAMCFG_PART_SEL_PARTID_SEL, partid);
+
+	__mpam_part_sel_raw(partsel, msc);
+}
+
+int mpam_register_requestor(u16 partid_max, u8 pmg_max)
+{
+	guard(spinlock)(&partid_max_lock);
+	if (!partid_max_init) {
+		mpam_partid_max = partid_max;
+		mpam_pmg_max = pmg_max;
+		partid_max_init = true;
+	} else if (!partid_max_published) {
+		mpam_partid_max = min(mpam_partid_max, partid_max);
+		mpam_pmg_max = min(mpam_pmg_max, pmg_max);
+	} else {
+		/* New requestors can't lower the values */
+		if (partid_max < mpam_partid_max || pmg_max < mpam_pmg_max)
+			return -EBUSY;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mpam_register_requestor);
+
 static struct mpam_class *
 mpam_class_alloc(u8 level_idx, enum mpam_class_types type)
 {
@@ -450,9 +524,35 @@ int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
 	return err;
 }
 
+static struct mpam_msc_ris *mpam_get_or_create_ris(struct mpam_msc *msc,
+						   u8 ris_idx)
+{
+	int err;
+	struct mpam_msc_ris *ris;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	if (!test_bit(ris_idx, &msc->ris_idxs)) {
+		err = mpam_ris_create_locked(msc, ris_idx, MPAM_CLASS_UNKNOWN,
+					     0, 0);
+		if (err)
+			return ERR_PTR(err);
+	}
+
+	list_for_each_entry(ris, &msc->ris, msc_list) {
+		if (ris->ris_idx == ris_idx)
+			return ris;
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+
 static int mpam_msc_hw_probe(struct mpam_msc *msc)
 {
 	u64 idr;
+	u16 partid_max;
+	u8 ris_idx, pmg_max;
+	struct mpam_msc_ris *ris;
 	struct device *dev = &msc->pdev->dev;
 
 	lockdep_assert_held(&msc->probe_lock);
@@ -463,6 +563,40 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
 		return -EIO;
 	}
 
+	/* Grab an IDR value to find out how many RIS there are */
+	mutex_lock(&msc->part_sel_lock);
+	idr = mpam_msc_read_idr(msc);
+	mutex_unlock(&msc->part_sel_lock);
+
+	msc->ris_max = FIELD_GET(MPAMF_IDR_RIS_MAX, idr);
+
+	/* Use these values so partid/pmg always starts with a valid value */
+	msc->partid_max = FIELD_GET(MPAMF_IDR_PARTID_MAX, idr);
+	msc->pmg_max = FIELD_GET(MPAMF_IDR_PMG_MAX, idr);
+
+	for (ris_idx = 0; ris_idx <= msc->ris_max; ris_idx++) {
+		mutex_lock(&msc->part_sel_lock);
+		__mpam_part_sel(ris_idx, 0, msc);
+		idr = mpam_msc_read_idr(msc);
+		mutex_unlock(&msc->part_sel_lock);
+
+		partid_max = FIELD_GET(MPAMF_IDR_PARTID_MAX, idr);
+		pmg_max = FIELD_GET(MPAMF_IDR_PMG_MAX, idr);
+		msc->partid_max = min(msc->partid_max, partid_max);
+		msc->pmg_max = min(msc->pmg_max, pmg_max);
+
+		mutex_lock(&mpam_list_lock);
+		ris = mpam_get_or_create_ris(msc, ris_idx);
+		mutex_unlock(&mpam_list_lock);
+		if (IS_ERR(ris))
+			return PTR_ERR(ris);
+	}
+
+	spin_lock(&partid_max_lock);
+	mpam_partid_max = min(mpam_partid_max, msc->partid_max);
+	mpam_pmg_max = min(mpam_pmg_max, msc->pmg_max);
+	spin_unlock(&partid_max_lock);
+
 	msc->probed = true;
 
 	return 0;
@@ -682,10 +816,20 @@ static struct platform_driver mpam_msc_driver = {
 
 static void mpam_enable_once(void)
 {
+	/*
+	 * Once the cpuhp callbacks have been changed, mpam_partid_max can no
+	 * longer change.
+	 */
+	spin_lock(&partid_max_lock);
+	partid_max_published = true;
+	spin_unlock(&partid_max_lock);
+
 	mpam_register_cpuhp_callbacks(mpam_cpu_online, mpam_cpu_offline,
 				      "mpam:online");
 
-	pr_info("MPAM enabled\n");
+	/* Use printk() to avoid the pr_fmt adding the function name. */
+	printk(KERN_INFO "MPAM enabled with %u PARTIDs and %u PMGs\n",
+	       mpam_partid_max + 1, mpam_pmg_max + 1);
 }
 
 void mpam_disable(struct work_struct *ignored)
@@ -751,4 +895,6 @@ static int __init mpam_msc_driver_init(void)
 
 	return platform_driver_register(&mpam_msc_driver);
 }
+
+/* Must occur after arm64_mpam_register_cpus() from arch_initcall() */
 subsys_initcall(mpam_msc_driver_init);
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 4e1538d29783..768a58a3ab27 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -49,6 +49,8 @@ struct mpam_msc {
 	 */
 	struct mutex		probe_lock;
 	bool			probed;
+	u16			partid_max;
+	u8			pmg_max;
 	unsigned long		ris_idxs;
 	u32			ris_max;
 
@@ -138,6 +140,10 @@ struct mpam_msc_ris {
 extern struct srcu_struct mpam_srcu;
 extern struct list_head mpam_classes;
 
+/* System wide partid/pmg values */
+extern u16 mpam_partid_max;
+extern u8 mpam_pmg_max;
+
 /* Scheduled work callback to enable mpam once all MSC have been probed */
 void mpam_enable(struct work_struct *work);
 void mpam_disable(struct work_struct *work);
diff --git a/include/linux/arm_mpam.h b/include/linux/arm_mpam.h
index 13a8ac5c2cbd..7f00c5285a32 100644
--- a/include/linux/arm_mpam.h
+++ b/include/linux/arm_mpam.h
@@ -49,4 +49,18 @@ static inline int mpam_ris_create(struct mpam_msc *msc, u8 ris_idx,
 }
 #endif
 
+/**
+ * mpam_register_requestor() - Register a requestor with the MPAM driver
+ * @partid_max:		The maximum PARTID value the requestor can generate.
+ * @pmg_max:		The maximum PMG value the requestor can generate.
+ *
+ * Registers a requestor with the MPAM driver to ensure the chosen system-wide
+ * minimum PARTID and PMG values will allow the requestors features to be used.
+ *
+ * Returns an error if the registration is too late, and a larger PARTID/PMG
+ * value has been advertised to user-space. In this case the requestor should
+ * not use its MPAM features. Returns 0 on success.
+ */
+int mpam_register_requestor(u16 partid_max, u8 pmg_max);
+
 #endif /* __LINUX_ARM_MPAM_H */
-- 
2.43.0

[PATCH v5 15/34] arm_mpam: Add helpers for managing the locking around the mon_sel registers

[Ben Horgan]

From: James Morse <james.morse@arm.com>

The MSC MON_SEL register needs to be accessed from hardirq for the overflow
interrupt, and when taking an IPI to access these registers on platforms
where MSC are not accessible from every CPU. This makes an irqsave
spinlock the obvious lock to protect these registers. On systems with SCMI
or PCC mailboxes it must be able to sleep, meaning a mutex must be used.
The SCMI or PCC platforms can't support an overflow interrupt, and
can't access the registers from hardirq context.

Clearly these two can't exist for one MSC at the same time.

Add helpers for the MON_SEL locking. For now, use a irqsave spinlock and
only support 'real' MMIO platforms.

In the future this lock will be split in two allowing SCMI/PCC platforms
to take a mutex. Because there are contexts where the SCMI/PCC platforms
can't make an access, mpam_mon_sel_lock() needs to be able to fail. Do
this now, so that all the error handling on these paths is present. This
allows the relevant paths to fail if they are needed on a platform where
this isn't possible, instead of having to make explicit checks of the
interface type.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
use devm_mutex_init()
include tiying
stray comma (Jonathan)
---
 drivers/resctrl/mpam_devices.c  |  2 ++
 drivers/resctrl/mpam_internal.h | 39 +++++++++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index ac1c770cea35..b0374dea1727 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/printk.h>
 #include <linux/srcu.h>
+#include <linux/spinlock.h>
 #include <linux/types.h>
 #include <linux/workqueue.h>
 
@@ -740,6 +741,7 @@ static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
 	if (err)
 		return ERR_PTR(err);
 
+	mpam_mon_sel_lock_init(msc);
 	msc->id = pdev->id;
 	msc->pdev = pdev;
 	INIT_LIST_HEAD_RCU(&msc->all_msc_list);
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 768a58a3ab27..b62ee55e1ed5 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -10,6 +10,7 @@
 #include <linux/llist.h>
 #include <linux/mutex.h>
 #include <linux/srcu.h>
+#include <linux/spinlock.h>
 #include <linux/types.h>
 
 #define MPAM_MSC_MAX_NUM_RIS	16
@@ -65,12 +66,50 @@ struct mpam_msc {
 	 */
 	struct mutex		part_sel_lock;
 
+	/*
+	 * mon_sel_lock protects access to the MSC hardware registers that are
+	 * affected by MPAMCFG_MON_SEL, and the mbwu_state.
+	 * Access to mon_sel is needed from both process and interrupt contexts,
+	 * but is complicated by firmware-backed platforms that can't make any
+	 * access unless they can sleep.
+	 * Always use the mpam_mon_sel_lock() helpers.
+	 * Accesses to mon_sel need to be able to fail if they occur in the wrong
+	 * context.
+	 * If needed, take msc->probe_lock first.
+	 */
+	raw_spinlock_t		_mon_sel_lock;
+	unsigned long		_mon_sel_flags;
+
 	void __iomem		*mapped_hwpage;
 	size_t			mapped_hwpage_sz;
 
 	struct mpam_garbage	garbage;
 };
 
+/* Returning false here means accesses to mon_sel must fail and report an error. */
+static inline bool __must_check mpam_mon_sel_lock(struct mpam_msc *msc)
+{
+	WARN_ON_ONCE(msc->iface != MPAM_IFACE_MMIO);
+
+	raw_spin_lock_irqsave(&msc->_mon_sel_lock, msc->_mon_sel_flags);
+	return true;
+}
+
+static inline void mpam_mon_sel_unlock(struct mpam_msc *msc)
+{
+	raw_spin_unlock_irqrestore(&msc->_mon_sel_lock, msc->_mon_sel_flags);
+}
+
+static inline void mpam_mon_sel_lock_held(struct mpam_msc *msc)
+{
+	lockdep_assert_held_once(&msc->_mon_sel_lock);
+}
+
+static inline void mpam_mon_sel_lock_init(struct mpam_msc *msc)
+{
+	raw_spin_lock_init(&msc->_mon_sel_lock);
+}
+
 struct mpam_class {
 	/* mpam_components in this class */
 	struct list_head	components;
-- 
2.43.0

[PATCH v5 16/34] arm_mpam: Probe the hardware features resctrl supports

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Expand the probing support with the control and monitor types
we can use with resctrl.

CC: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Drop the =0 in the enum (Jonathan)
---
 drivers/resctrl/mpam_devices.c  | 149 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |  33 +++++++
 2 files changed, 182 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index b0374dea1727..574093c8e95a 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -170,6 +170,22 @@ static inline void _mpam_write_partsel_reg(struct mpam_msc *msc, u16 reg, u32 va
 
 #define mpam_write_partsel_reg(msc, reg, val)  _mpam_write_partsel_reg(msc, MPAMCFG_##reg, val)
 
+static inline u32 _mpam_read_monsel_reg(struct mpam_msc *msc, u16 reg)
+{
+	mpam_mon_sel_lock_held(msc);
+	return __mpam_read_reg(msc, reg);
+}
+
+#define mpam_read_monsel_reg(msc, reg) _mpam_read_monsel_reg(msc, MSMON_##reg)
+
+static inline void _mpam_write_monsel_reg(struct mpam_msc *msc, u16 reg, u32 val)
+{
+	mpam_mon_sel_lock_held(msc);
+	__mpam_write_reg(msc, reg, val);
+}
+
+#define mpam_write_monsel_reg(msc, reg, val)   _mpam_write_monsel_reg(msc, MSMON_##reg, val)
+
 static u64 mpam_msc_read_idr(struct mpam_msc *msc)
 {
 	u64 idr_high = 0, idr_low;
@@ -548,6 +564,133 @@ static struct mpam_msc_ris *mpam_get_or_create_ris(struct mpam_msc *msc,
 	return ERR_PTR(-ENOENT);
 }
 
+/*
+ * IHI009A.a has this nugget: "If a monitor does not support automatic behaviour
+ * of NRDY, software can use this bit for any purpose" - so hardware might not
+ * implement this - but it isn't RES0.
+ *
+ * Try and see what values stick in this bit. If we can write either value,
+ * its probably not implemented by hardware.
+ */
+static bool _mpam_ris_hw_probe_hw_nrdy(struct mpam_msc_ris *ris, u32 mon_reg)
+{
+	u32 now;
+	u64 mon_sel;
+	bool can_set, can_clear;
+	struct mpam_msc *msc = ris->vmsc->msc;
+
+	if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
+		return false;
+
+	mon_sel = FIELD_PREP(MSMON_CFG_MON_SEL_MON_SEL, 0) |
+		  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
+	_mpam_write_monsel_reg(msc, mon_reg, mon_sel);
+
+	_mpam_write_monsel_reg(msc, mon_reg, MSMON___NRDY);
+	now = _mpam_read_monsel_reg(msc, mon_reg);
+	can_set = now & MSMON___NRDY;
+
+	_mpam_write_monsel_reg(msc, mon_reg, 0);
+	now = _mpam_read_monsel_reg(msc, mon_reg);
+	can_clear = !(now & MSMON___NRDY);
+	mpam_mon_sel_unlock(msc);
+
+	return (!can_set || !can_clear);
+}
+
+#define mpam_ris_hw_probe_hw_nrdy(_ris, _mon_reg)			\
+	_mpam_ris_hw_probe_hw_nrdy(_ris, MSMON_##_mon_reg)
+
+static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
+{
+	int err;
+	struct mpam_msc *msc = ris->vmsc->msc;
+	struct device *dev = &msc->pdev->dev;
+	struct mpam_props *props = &ris->props;
+
+	lockdep_assert_held(&msc->probe_lock);
+	lockdep_assert_held(&msc->part_sel_lock);
+
+	/* Cache Portion partitioning */
+	if (FIELD_GET(MPAMF_IDR_HAS_CPOR_PART, ris->idr)) {
+		u32 cpor_features = mpam_read_partsel_reg(msc, CPOR_IDR);
+
+		props->cpbm_wd = FIELD_GET(MPAMF_CPOR_IDR_CPBM_WD, cpor_features);
+		if (props->cpbm_wd)
+			mpam_set_feature(mpam_feat_cpor_part, props);
+	}
+
+	/* Memory bandwidth partitioning */
+	if (FIELD_GET(MPAMF_IDR_HAS_MBW_PART, ris->idr)) {
+		u32 mbw_features = mpam_read_partsel_reg(msc, MBW_IDR);
+
+		/* portion bitmap resolution */
+		props->mbw_pbm_bits = FIELD_GET(MPAMF_MBW_IDR_BWPBM_WD, mbw_features);
+		if (props->mbw_pbm_bits &&
+		    FIELD_GET(MPAMF_MBW_IDR_HAS_PBM, mbw_features))
+			mpam_set_feature(mpam_feat_mbw_part, props);
+
+		props->bwa_wd = FIELD_GET(MPAMF_MBW_IDR_BWA_WD, mbw_features);
+		if (props->bwa_wd && FIELD_GET(MPAMF_MBW_IDR_HAS_MAX, mbw_features))
+			mpam_set_feature(mpam_feat_mbw_max, props);
+	}
+
+	/* Performance Monitoring */
+	if (FIELD_GET(MPAMF_IDR_HAS_MSMON, ris->idr)) {
+		u32 msmon_features = mpam_read_partsel_reg(msc, MSMON_IDR);
+
+		/*
+		 * If the firmware max-nrdy-us property is missing, the
+		 * CSU counters can't be used. Should we wait forever?
+		 */
+		err = device_property_read_u32(&msc->pdev->dev,
+					       "arm,not-ready-us",
+					       &msc->nrdy_usec);
+
+		if (FIELD_GET(MPAMF_MSMON_IDR_MSMON_CSU, msmon_features)) {
+			u32 csumonidr;
+
+			csumonidr = mpam_read_partsel_reg(msc, CSUMON_IDR);
+			props->num_csu_mon = FIELD_GET(MPAMF_CSUMON_IDR_NUM_MON, csumonidr);
+			if (props->num_csu_mon) {
+				bool hw_managed;
+
+				mpam_set_feature(mpam_feat_msmon_csu, props);
+
+				/* Is NRDY hardware managed? */
+				hw_managed = mpam_ris_hw_probe_hw_nrdy(ris, CSU);
+				if (hw_managed)
+					mpam_set_feature(mpam_feat_msmon_csu_hw_nrdy, props);
+			}
+
+			/*
+			 * Accept the missing firmware property if NRDY appears
+			 * un-implemented.
+			 */
+			if (err && mpam_has_feature(mpam_feat_msmon_csu_hw_nrdy, props))
+				dev_err_once(dev, "Counters are not usable because not-ready timeout was not provided by firmware.");
+		}
+		if (FIELD_GET(MPAMF_MSMON_IDR_MSMON_MBWU, msmon_features)) {
+			bool hw_managed;
+			u32 mbwumon_idr = mpam_read_partsel_reg(msc, MBWUMON_IDR);
+
+			props->num_mbwu_mon = FIELD_GET(MPAMF_MBWUMON_IDR_NUM_MON, mbwumon_idr);
+			if (props->num_mbwu_mon)
+				mpam_set_feature(mpam_feat_msmon_mbwu, props);
+
+			/* Is NRDY hardware managed? */
+			hw_managed = mpam_ris_hw_probe_hw_nrdy(ris, MBWU);
+			if (hw_managed)
+				mpam_set_feature(mpam_feat_msmon_mbwu_hw_nrdy, props);
+
+			/*
+			 * Don't warn about any missing firmware property for
+			 * MBWU NRDY - it doesn't make any sense!
+			 */
+		}
+	}
+}
+
 static int mpam_msc_hw_probe(struct mpam_msc *msc)
 {
 	u64 idr;
@@ -591,6 +734,12 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
 		mutex_unlock(&mpam_list_lock);
 		if (IS_ERR(ris))
 			return PTR_ERR(ris);
+		ris->idr = idr;
+
+		mutex_lock(&msc->part_sel_lock);
+		__mpam_part_sel(ris_idx, 0, msc);
+		mpam_ris_hw_probe(ris);
+		mutex_unlock(&msc->part_sel_lock);
 	}
 
 	spin_lock(&partid_max_lock);
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index b62ee55e1ed5..09c27000234d 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -5,12 +5,14 @@
 #define MPAM_INTERNAL_H
 
 #include <linux/arm_mpam.h>
+#include <linux/bitmap.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
 #include <linux/llist.h>
 #include <linux/mutex.h>
 #include <linux/srcu.h>
 #include <linux/spinlock.h>
+#include <linux/srcu.h>
 #include <linux/types.h>
 
 #define MPAM_MSC_MAX_NUM_RIS	16
@@ -110,6 +112,33 @@ static inline void mpam_mon_sel_lock_init(struct mpam_msc *msc)
 	raw_spin_lock_init(&msc->_mon_sel_lock);
 }
 
+/* Bits for mpam features bitmaps */
+enum mpam_device_features {
+	mpam_feat_cpor_part,
+	mpam_feat_mbw_part,
+	mpam_feat_mbw_min,
+	mpam_feat_mbw_max,
+	mpam_feat_msmon,
+	mpam_feat_msmon_csu,
+	mpam_feat_msmon_csu_hw_nrdy,
+	mpam_feat_msmon_mbwu,
+	mpam_feat_msmon_mbwu_hw_nrdy,
+	MPAM_FEATURE_LAST
+};
+
+struct mpam_props {
+	DECLARE_BITMAP(features, MPAM_FEATURE_LAST);
+
+	u16			cpbm_wd;
+	u16			mbw_pbm_bits;
+	u16			bwa_wd;
+	u16			num_csu_mon;
+	u16			num_mbwu_mon;
+};
+
+#define mpam_has_feature(_feat, x)	test_bit(_feat, (x)->features)
+#define mpam_set_feature(_feat, x)	set_bit(_feat, (x)->features)
+
 struct mpam_class {
 	/* mpam_components in this class */
 	struct list_head	components;
@@ -149,6 +178,8 @@ struct mpam_vmsc {
 	/* mpam_msc_ris in this vmsc */
 	struct list_head	ris;
 
+	struct mpam_props	props;
+
 	/* All RIS in this vMSC are members of this MSC */
 	struct mpam_msc		*msc;
 
@@ -160,6 +191,8 @@ struct mpam_vmsc {
 
 struct mpam_msc_ris {
 	u8			ris_idx;
+	u64			idr;
+	struct mpam_props	props;
 
 	cpumask_t		affinity;
 
-- 
2.43.0

[PATCH v5 17/34] arm_mpam: Merge supported features during mpam_enable() into mpam_class

[Ben Horgan]

From: James Morse <james.morse@arm.com>

To make a decision about whether to expose an mpam class as
a resctrl resource we need to know its overall supported
features and properties.

Once we've probed all the resources, we can walk the tree
and produce overall values by merging the bitmaps. This
eliminates features that are only supported by some MSC
that make up a component or class.

If bitmap properties are mismatched within a component we
cannot support the mismatched feature.

Care has to be taken as vMSC may hold mismatched RIS.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_devices.c  | 214 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |   3 +
 2 files changed, 217 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 574093c8e95a..16af9e80b444 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -965,6 +965,216 @@ static struct platform_driver mpam_msc_driver = {
 	.remove = mpam_msc_drv_remove,
 };
 
+/* Any of these features mean the BWA_WD field is valid. */
+static bool mpam_has_bwa_wd_feature(struct mpam_props *props)
+{
+	if (mpam_has_feature(mpam_feat_mbw_min, props))
+		return true;
+	if (mpam_has_feature(mpam_feat_mbw_max, props))
+		return true;
+	return false;
+}
+
+#define MISMATCHED_HELPER(parent, child, helper, field, alias)		\
+	helper(parent) &&						\
+	((helper(child) && (parent)->field != (child)->field) ||	\
+	 (!helper(child) && !(alias)))
+
+#define MISMATCHED_FEAT(parent, child, feat, field, alias)		     \
+	mpam_has_feature((feat), (parent)) &&				     \
+	((mpam_has_feature((feat), (child)) && (parent)->field != (child)->field) || \
+	 (!mpam_has_feature((feat), (child)) && !(alias)))
+
+#define CAN_MERGE_FEAT(parent, child, feat, alias)			\
+	(alias) && !mpam_has_feature((feat), (parent)) &&		\
+	mpam_has_feature((feat), (child))
+
+/*
+ * Combine two props fields.
+ * If this is for controls that alias the same resource, it is safe to just
+ * copy the values over. If two aliasing controls implement the same scheme
+ * a safe value must be picked.
+ * For non-aliasing controls, these control different resources, and the
+ * resulting safe value must be compatible with both. When merging values in
+ * the tree, all the aliasing resources must be handled first.
+ * On mismatch, parent is modified.
+ */
+static void __props_mismatch(struct mpam_props *parent,
+			     struct mpam_props *child, bool alias)
+{
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_cpor_part, alias)) {
+		parent->cpbm_wd = child->cpbm_wd;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_cpor_part,
+				   cpbm_wd, alias)) {
+		pr_debug("cleared cpor_part\n");
+		mpam_clear_feature(mpam_feat_cpor_part, parent);
+		parent->cpbm_wd = 0;
+	}
+
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_mbw_part, alias)) {
+		parent->mbw_pbm_bits = child->mbw_pbm_bits;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_mbw_part,
+				   mbw_pbm_bits, alias)) {
+		pr_debug("cleared mbw_part\n");
+		mpam_clear_feature(mpam_feat_mbw_part, parent);
+		parent->mbw_pbm_bits = 0;
+	}
+
+	/* bwa_wd is a count of bits, fewer bits means less precision */
+	if (alias && !mpam_has_bwa_wd_feature(parent) &&
+	    mpam_has_bwa_wd_feature(child)) {
+		parent->bwa_wd = child->bwa_wd;
+	} else if (MISMATCHED_HELPER(parent, child, mpam_has_bwa_wd_feature,
+				     bwa_wd, alias)) {
+		pr_debug("took the min bwa_wd\n");
+		parent->bwa_wd = min(parent->bwa_wd, child->bwa_wd);
+	}
+
+	/* For num properties, take the minimum */
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_msmon_csu, alias)) {
+		parent->num_csu_mon = child->num_csu_mon;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_msmon_csu,
+				   num_csu_mon, alias)) {
+		pr_debug("took the min num_csu_mon\n");
+		parent->num_csu_mon = min(parent->num_csu_mon,
+					  child->num_csu_mon);
+	}
+
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_msmon_mbwu, alias)) {
+		parent->num_mbwu_mon = child->num_mbwu_mon;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_msmon_mbwu,
+				   num_mbwu_mon, alias)) {
+		pr_debug("took the min num_mbwu_mon\n");
+		parent->num_mbwu_mon = min(parent->num_mbwu_mon,
+					   child->num_mbwu_mon);
+	}
+
+	if (alias) {
+		/* Merge features for aliased resources */
+		bitmap_or(parent->features, parent->features, child->features, MPAM_FEATURE_LAST);
+	} else {
+		/* Clear missing features for non aliasing */
+		bitmap_and(parent->features, parent->features, child->features, MPAM_FEATURE_LAST);
+	}
+}
+
+/*
+ * If a vmsc doesn't match class feature/configuration, do the right thing(tm).
+ * For 'num' properties we can just take the minimum.
+ * For properties where the mismatched unused bits would make a difference, we
+ * nobble the class feature, as we can't configure all the resources.
+ * e.g. The L3 cache is composed of two resources with 13 and 17 portion
+ * bitmaps respectively.
+ */
+static void
+__class_props_mismatch(struct mpam_class *class, struct mpam_vmsc *vmsc)
+{
+	struct mpam_props *cprops = &class->props;
+	struct mpam_props *vprops = &vmsc->props;
+	struct device *dev = &vmsc->msc->pdev->dev;
+
+	lockdep_assert_held(&mpam_list_lock); /* we modify class */
+
+	dev_dbg(dev, "Merging features for class:0x%lx &= vmsc:0x%lx\n",
+		(long)cprops->features, (long)vprops->features);
+
+	/* Take the safe value for any common features */
+	__props_mismatch(cprops, vprops, false);
+}
+
+static void
+__vmsc_props_mismatch(struct mpam_vmsc *vmsc, struct mpam_msc_ris *ris)
+{
+	struct mpam_props *rprops = &ris->props;
+	struct mpam_props *vprops = &vmsc->props;
+	struct device *dev = &vmsc->msc->pdev->dev;
+
+	lockdep_assert_held(&mpam_list_lock); /* we modify vmsc */
+
+	dev_dbg(dev, "Merging features for vmsc:0x%lx |= ris:0x%lx\n",
+		(long)vprops->features, (long)rprops->features);
+
+	/*
+	 * Merge mismatched features - Copy any features that aren't common,
+	 * but take the safe value for any common features.
+	 */
+	__props_mismatch(vprops, rprops, true);
+}
+
+/*
+ * Copy the first component's first vMSC's properties and features to the
+ * class. __class_props_mismatch() will remove conflicts.
+ * It is not possible to have a class with no components, or a component with
+ * no resources. The vMSC properties have already been built.
+ */
+static void mpam_enable_init_class_features(struct mpam_class *class)
+{
+	struct mpam_vmsc *vmsc;
+	struct mpam_component *comp;
+
+	comp = list_first_entry(&class->components,
+				struct mpam_component, class_list);
+	vmsc = list_first_entry(&comp->vmsc,
+				struct mpam_vmsc, comp_list);
+
+	class->props = vmsc->props;
+}
+
+static void mpam_enable_merge_vmsc_features(struct mpam_component *comp)
+{
+	struct mpam_vmsc *vmsc;
+	struct mpam_msc_ris *ris;
+	struct mpam_class *class = comp->class;
+
+	list_for_each_entry(vmsc, &comp->vmsc, comp_list) {
+		list_for_each_entry(ris, &vmsc->ris, vmsc_list) {
+			__vmsc_props_mismatch(vmsc, ris);
+			class->nrdy_usec = max(class->nrdy_usec,
+					       vmsc->msc->nrdy_usec);
+		}
+	}
+}
+
+static void mpam_enable_merge_class_features(struct mpam_component *comp)
+{
+	struct mpam_vmsc *vmsc;
+	struct mpam_class *class = comp->class;
+
+	list_for_each_entry(vmsc, &comp->vmsc, comp_list)
+		__class_props_mismatch(class, vmsc);
+}
+
+/*
+ * Merge all the common resource features into class.
+ * vmsc features are bitwise-or'd together by mpam_enable_merge_vmsc_features()
+ * as the first step so that mpam_enable_init_class_features() can initialise
+ * the class with a representative set of features.
+ * Next the mpam_enable_merge_class_features() bitwise-and's all the vmsc
+ * features to form the class features.
+ * Other features are the min/max as appropriate.
+ *
+ * To avoid walking the whole tree twice, the class->nrdy_usec property is
+ * updated when working with the vmsc as it is a max(), and doesn't need
+ * initialising first.
+ */
+static void mpam_enable_merge_features(struct list_head *all_classes_list)
+{
+	struct mpam_class *class;
+	struct mpam_component *comp;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_for_each_entry(class, all_classes_list, classes_list) {
+		list_for_each_entry(comp, &class->components, class_list)
+			mpam_enable_merge_vmsc_features(comp);
+
+		mpam_enable_init_class_features(class);
+
+		list_for_each_entry(comp, &class->components, class_list)
+			mpam_enable_merge_class_features(comp);
+	}
+}
+
 static void mpam_enable_once(void)
 {
 	/*
@@ -975,6 +1185,10 @@ static void mpam_enable_once(void)
 	partid_max_published = true;
 	spin_unlock(&partid_max_lock);
 
+	mutex_lock(&mpam_list_lock);
+	mpam_enable_merge_features(&mpam_classes);
+	mutex_unlock(&mpam_list_lock);
+
 	mpam_register_cpuhp_callbacks(mpam_cpu_online, mpam_cpu_offline,
 				      "mpam:online");
 
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 09c27000234d..1a95b2897ac1 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -138,6 +138,7 @@ struct mpam_props {
 
 #define mpam_has_feature(_feat, x)	test_bit(_feat, (x)->features)
 #define mpam_set_feature(_feat, x)	set_bit(_feat, (x)->features)
+#define mpam_clear_feature(_feat, x)	clear_bit(_feat, (x)->features)
 
 struct mpam_class {
 	/* mpam_components in this class */
@@ -145,6 +146,8 @@ struct mpam_class {
 
 	cpumask_t		affinity;
 
+	struct mpam_props	props;
+	u32			nrdy_usec;
 	u8			level;
 	enum mpam_class_types	type;
 
-- 
2.43.0

[PATCH v5 18/34] arm_mpam: Reset MSC controls from cpuhp callbacks

[Ben Horgan]

From: James Morse <james.morse@arm.com>

When a CPU comes online, it may bring a newly accessible MSC with
it. Only the default partid has its value reset by hardware, and
even then the MSC might not have been reset since its config was
previously dirtied. e.g. Kexec.

Any in-use partid must have its configuration restored, or reset.
In-use partids may be held in caches and evicted later.

MSC are also reset when CPUs are taken offline to cover cases where
firmware doesn't reset the MSC over reboot using UEFI, or kexec
where there is no firmware involvement.

If the configuration for a RIS has not been touched since it was
brought online, it does not need resetting again.

To reset, write the maximum values for all discovered controls.

CC: Rohit Mathew <Rohit.Mathew@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Add tags - thanks!
---
 drivers/resctrl/mpam_devices.c  | 109 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |   3 +
 2 files changed, 112 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 16af9e80b444..fe6b931be139 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -7,6 +7,7 @@
 #include <linux/atomic.h>
 #include <linux/arm_mpam.h>
 #include <linux/bitfield.h>
+#include <linux/bitmap.h>
 #include <linux/cacheinfo.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
@@ -752,8 +753,104 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
 	return 0;
 }
 
+static void mpam_reset_msc_bitmap(struct mpam_msc *msc, u16 reg, u16 wd)
+{
+	u32 num_words, msb;
+	u32 bm = ~0;
+	int i;
+
+	lockdep_assert_held(&msc->part_sel_lock);
+
+	if (wd == 0)
+		return;
+
+	/*
+	 * Write all ~0 to all but the last 32bit-word, which may
+	 * have fewer bits...
+	 */
+	num_words = DIV_ROUND_UP(wd, 32);
+	for (i = 0; i < num_words - 1; i++, reg += sizeof(bm))
+		__mpam_write_reg(msc, reg, bm);
+
+	/*
+	 * ....and then the last (maybe) partial 32bit word. When wd is a
+	 * multiple of 32, msb should be 31 to write a full 32bit word.
+	 */
+	msb = (wd - 1) % 32;
+	bm = GENMASK(msb, 0);
+	__mpam_write_reg(msc, reg, bm);
+}
+
+static void mpam_reset_ris_partid(struct mpam_msc_ris *ris, u16 partid)
+{
+	struct mpam_msc *msc = ris->vmsc->msc;
+	struct mpam_props *rprops = &ris->props;
+
+	WARN_ON_ONCE(!srcu_read_lock_held((&mpam_srcu)));
+
+	mutex_lock(&msc->part_sel_lock);
+	__mpam_part_sel(ris->ris_idx, partid, msc);
+
+	if (mpam_has_feature(mpam_feat_cpor_part, rprops))
+		mpam_reset_msc_bitmap(msc, MPAMCFG_CPBM, rprops->cpbm_wd);
+
+	if (mpam_has_feature(mpam_feat_mbw_part, rprops))
+		mpam_reset_msc_bitmap(msc, MPAMCFG_MBW_PBM, rprops->mbw_pbm_bits);
+
+	if (mpam_has_feature(mpam_feat_mbw_min, rprops))
+		mpam_write_partsel_reg(msc, MBW_MIN, 0);
+
+	if (mpam_has_feature(mpam_feat_mbw_max, rprops))
+		mpam_write_partsel_reg(msc, MBW_MAX, MPAMCFG_MBW_MAX_MAX);
+
+	mutex_unlock(&msc->part_sel_lock);
+}
+
+static void mpam_reset_ris(struct mpam_msc_ris *ris)
+{
+	u16 partid, partid_max;
+
+	WARN_ON_ONCE(!srcu_read_lock_held((&mpam_srcu)));
+
+	if (ris->in_reset_state)
+		return;
+
+	spin_lock(&partid_max_lock);
+	partid_max = mpam_partid_max;
+	spin_unlock(&partid_max_lock);
+	for (partid = 0; partid <= partid_max; partid++)
+		mpam_reset_ris_partid(ris, partid);
+}
+
+static void mpam_reset_msc(struct mpam_msc *msc, bool online)
+{
+	struct mpam_msc_ris *ris;
+
+	list_for_each_entry_srcu(ris, &msc->ris, msc_list, srcu_read_lock_held(&mpam_srcu)) {
+		mpam_reset_ris(ris);
+
+		/*
+		 * Set in_reset_state when coming online. The reset state
+		 * for non-zero partid may be lost while the CPUs are offline.
+		 */
+		ris->in_reset_state = online;
+	}
+}
+
 static int mpam_cpu_online(unsigned int cpu)
 {
+	struct mpam_msc *msc;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		if (!cpumask_test_cpu(cpu, &msc->accessibility))
+			continue;
+
+		if (atomic_fetch_inc(&msc->online_refs) == 0)
+			mpam_reset_msc(msc, true);
+	}
+
 	return 0;
 }
 
@@ -792,6 +889,18 @@ static int mpam_discovery_cpu_online(unsigned int cpu)
 
 static int mpam_cpu_offline(unsigned int cpu)
 {
+	struct mpam_msc *msc;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		if (!cpumask_test_cpu(cpu, &msc->accessibility))
+			continue;
+
+		if (atomic_dec_and_test(&msc->online_refs))
+			mpam_reset_msc(msc, false);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 1a95b2897ac1..1ad62f13bfb3 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -5,6 +5,7 @@
 #define MPAM_INTERNAL_H
 
 #include <linux/arm_mpam.h>
+#include <linux/atomic.h>
 #include <linux/bitmap.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
@@ -45,6 +46,7 @@ struct mpam_msc {
 	enum mpam_msc_iface	iface;
 	u32			nrdy_usec;
 	cpumask_t		accessibility;
+	atomic_t		online_refs;
 
 	/*
 	 * probe_lock is only taken during discovery. After discovery these
@@ -196,6 +198,7 @@ struct mpam_msc_ris {
 	u8			ris_idx;
 	u64			idr;
 	struct mpam_props	props;
+	bool			in_reset_state;
 
 	cpumask_t		affinity;
 
-- 
2.43.0

[PATCH v5 19/34] arm_mpam: Add a helper to touch an MSC from any CPU

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Resetting RIS entries from the cpuhp callback is easy as the
callback occurs on the correct CPU. This won't be true for any other
caller that wants to reset or configure an MSC.

Add a helper that schedules the provided function if necessary.

Callers should take the cpuhp lock to prevent the cpuhp callbacks from
changing the MSC state.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_devices.c | 37 +++++++++++++++++++++++++++++++---
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index fe6b931be139..8e7a74482fcd 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -806,20 +806,51 @@ static void mpam_reset_ris_partid(struct mpam_msc_ris *ris, u16 partid)
 	mutex_unlock(&msc->part_sel_lock);
 }
 
-static void mpam_reset_ris(struct mpam_msc_ris *ris)
+/*
+ * Called via smp_call_on_cpu() to prevent migration, while still being
+ * pre-emptible.
+ */
+static int mpam_reset_ris(void *arg)
 {
 	u16 partid, partid_max;
+	struct mpam_msc_ris *ris = arg;
 
 	WARN_ON_ONCE(!srcu_read_lock_held((&mpam_srcu)));
 
 	if (ris->in_reset_state)
-		return;
+		return 0;
 
 	spin_lock(&partid_max_lock);
 	partid_max = mpam_partid_max;
 	spin_unlock(&partid_max_lock);
 	for (partid = 0; partid <= partid_max; partid++)
 		mpam_reset_ris_partid(ris, partid);
+
+	return 0;
+}
+
+/*
+ * Get the preferred CPU for this MSC. If it is accessible from this CPU,
+ * this CPU is preferred. This can be preempted/migrated, it will only result
+ * in more work.
+ */
+static int mpam_get_msc_preferred_cpu(struct mpam_msc *msc)
+{
+	int cpu = raw_smp_processor_id();
+
+	if (cpumask_test_cpu(cpu, &msc->accessibility))
+		return cpu;
+
+	return cpumask_first_and(&msc->accessibility, cpu_online_mask);
+}
+
+static int mpam_touch_msc(struct mpam_msc *msc, int (*fn)(void *a), void *arg)
+{
+	lockdep_assert_irqs_enabled();
+	lockdep_assert_cpus_held();
+	WARN_ON_ONCE(!srcu_read_lock_held((&mpam_srcu)));
+
+	return smp_call_on_cpu(mpam_get_msc_preferred_cpu(msc), fn, arg, true);
 }
 
 static void mpam_reset_msc(struct mpam_msc *msc, bool online)
@@ -827,7 +858,7 @@ static void mpam_reset_msc(struct mpam_msc *msc, bool online)
 	struct mpam_msc_ris *ris;
 
 	list_for_each_entry_srcu(ris, &msc->ris, msc_list, srcu_read_lock_held(&mpam_srcu)) {
-		mpam_reset_ris(ris);
+		mpam_touch_msc(msc, &mpam_reset_ris, ris);
 
 		/*
 		 * Set in_reset_state when coming online. The reset state
-- 
2.43.0

[PATCH v5 20/34] arm_mpam: Extend reset logic to allow devices to be reset any time

[Ben Horgan]

From: James Morse <james.morse@arm.com>

cpuhp callbacks aren't the only time the MSC configuration may need to
be reset. Resctrl has an API call to reset a class.
If an MPAM error interrupt arrives it indicates the driver has
misprogrammed an MSC. The safest thing to do is reset all the MSCs
and disable MPAM.

Add a helper to reset RIS via their class. Call this from mpam_disable(),
which can be scheduled from the error interrupt handler.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_devices.c | 57 ++++++++++++++++++++++++++++++++--
 1 file changed, 54 insertions(+), 3 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 8e7a74482fcd..ff33f6485952 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -808,15 +808,13 @@ static void mpam_reset_ris_partid(struct mpam_msc_ris *ris, u16 partid)
 
 /*
  * Called via smp_call_on_cpu() to prevent migration, while still being
- * pre-emptible.
+ * pre-emptible. Caller must hold mpam_srcu.
  */
 static int mpam_reset_ris(void *arg)
 {
 	u16 partid, partid_max;
 	struct mpam_msc_ris *ris = arg;
 
-	WARN_ON_ONCE(!srcu_read_lock_held((&mpam_srcu)));
-
 	if (ris->in_reset_state)
 		return 0;
 
@@ -1337,8 +1335,55 @@ static void mpam_enable_once(void)
 	       mpam_partid_max + 1, mpam_pmg_max + 1);
 }
 
+static void mpam_reset_component_locked(struct mpam_component *comp)
+{
+	struct mpam_vmsc *vmsc;
+
+	lockdep_assert_cpus_held();
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(vmsc, &comp->vmsc, comp_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		struct mpam_msc *msc = vmsc->msc;
+		struct mpam_msc_ris *ris;
+
+		list_for_each_entry_srcu(ris, &vmsc->ris, vmsc_list,
+					 srcu_read_lock_held(&mpam_srcu)) {
+			if (!ris->in_reset_state)
+				mpam_touch_msc(msc, mpam_reset_ris, ris);
+			ris->in_reset_state = true;
+		}
+	}
+}
+
+static void mpam_reset_class_locked(struct mpam_class *class)
+{
+	struct mpam_component *comp;
+
+	lockdep_assert_cpus_held();
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(comp, &class->components, class_list,
+				 srcu_read_lock_held(&mpam_srcu))
+		mpam_reset_component_locked(comp);
+}
+
+static void mpam_reset_class(struct mpam_class *class)
+{
+	cpus_read_lock();
+	mpam_reset_class_locked(class);
+	cpus_read_unlock();
+}
+
+/*
+ * Called in response to an error IRQ.
+ * All of MPAMs errors indicate a software bug, restore any modified
+ * controls to their reset values.
+ */
 void mpam_disable(struct work_struct *ignored)
 {
+	int idx;
+	struct mpam_class *class;
 	struct mpam_msc *msc, *tmp;
 
 	mutex_lock(&mpam_cpuhp_state_lock);
@@ -1348,6 +1393,12 @@ void mpam_disable(struct work_struct *ignored)
 	}
 	mutex_unlock(&mpam_cpuhp_state_lock);
 
+	idx = srcu_read_lock(&mpam_srcu);
+	list_for_each_entry_srcu(class, &mpam_classes, classes_list,
+				 srcu_read_lock_held(&mpam_srcu))
+		mpam_reset_class(class);
+	srcu_read_unlock(&mpam_srcu, idx);
+
 	mutex_lock(&mpam_list_lock);
 	list_for_each_entry_safe(msc, tmp, &mpam_all_msc, all_msc_list)
 		mpam_msc_destroy(msc);
-- 
2.43.0

[PATCH v5 21/34] arm_mpam: Register and enable IRQs

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Register and enable error IRQs. All the MPAM error interrupts indicate a
software bug, e.g. out of range partid. If the error interrupt is ever
signalled, attempt to disable MPAM.

Only the irq handler accesses the MPAMF_ESR register, so no locking is
needed. The work to disable MPAM after an error needs to happen at process
context as it takes mutex. It also unregisters the interrupts, meaning
it can't be done from the threaded part of a threaded interrupt.
Instead, mpam_disable() gets scheduled.

Enabling the IRQs in the MSC may involve cross calling to a CPU that
can access the MSC.

Once the IRQ is requested, the mpam_disable() path can be called
asynchronously, which will walk structures sized by max_partid. Ensure
this size is fixed before the interrupt is requested.

CC: Rohit Mathew <rohit.mathew@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Rohit Mathew <rohit.mathew@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Add tag, thanks!
Whitespace changes
Use devm_mutex_init()
---
 drivers/resctrl/mpam_devices.c  | 280 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |  13 ++
 2 files changed, 293 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index ff33f6485952..adcde470067c 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -14,6 +14,9 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 #include <linux/gfp.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqdesc.h>
 #include <linux/list.h>
 #include <linux/lockdep.h>
 #include <linux/mutex.h>
@@ -200,6 +203,35 @@ static u64 mpam_msc_read_idr(struct mpam_msc *msc)
 	return (idr_high << 32) | idr_low;
 }
 
+static void mpam_msc_clear_esr(struct mpam_msc *msc)
+{
+	u64 esr_low = __mpam_read_reg(msc, MPAMF_ESR);
+
+	if (!esr_low)
+		return;
+
+	/*
+	 * Clearing the high/low bits of MPAMF_ESR can not be atomic.
+	 * Clear the top half first, so that the pending error bits in the
+	 * lower half prevent hardware from updating either half of the
+	 * register.
+	 */
+	if (msc->has_extd_esr)
+		__mpam_write_reg(msc, MPAMF_ESR + 4, 0);
+	__mpam_write_reg(msc, MPAMF_ESR, 0);
+}
+
+static u64 mpam_msc_read_esr(struct mpam_msc *msc)
+{
+	u64 esr_high = 0, esr_low;
+
+	esr_low = __mpam_read_reg(msc, MPAMF_ESR);
+	if (msc->has_extd_esr)
+		esr_high = __mpam_read_reg(msc, MPAMF_ESR + 4);
+
+	return (esr_high << 32) | esr_low;
+}
+
 static void __mpam_part_sel_raw(u32 partsel, struct mpam_msc *msc)
 {
 	lockdep_assert_held(&msc->part_sel_lock);
@@ -729,6 +761,7 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
 		pmg_max = FIELD_GET(MPAMF_IDR_PMG_MAX, idr);
 		msc->partid_max = min(msc->partid_max, partid_max);
 		msc->pmg_max = min(msc->pmg_max, pmg_max);
+		msc->has_extd_esr = FIELD_GET(MPAMF_IDR_HAS_EXTD_ESR, idr);
 
 		mutex_lock(&mpam_list_lock);
 		ris = mpam_get_or_create_ris(msc, ris_idx);
@@ -743,6 +776,9 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
 		mutex_unlock(&msc->part_sel_lock);
 	}
 
+	/* Clear any stale errors */
+	mpam_msc_clear_esr(msc);
+
 	spin_lock(&partid_max_lock);
 	mpam_partid_max = min(mpam_partid_max, msc->partid_max);
 	mpam_pmg_max = min(mpam_pmg_max, msc->pmg_max);
@@ -866,6 +902,13 @@ static void mpam_reset_msc(struct mpam_msc *msc, bool online)
 	}
 }
 
+static void _enable_percpu_irq(void *_irq)
+{
+	int *irq = _irq;
+
+	enable_percpu_irq(*irq, IRQ_TYPE_NONE);
+}
+
 static int mpam_cpu_online(unsigned int cpu)
 {
 	struct mpam_msc *msc;
@@ -876,6 +919,9 @@ static int mpam_cpu_online(unsigned int cpu)
 		if (!cpumask_test_cpu(cpu, &msc->accessibility))
 			continue;
 
+		if (msc->reenable_error_ppi)
+			_enable_percpu_irq(&msc->reenable_error_ppi);
+
 		if (atomic_fetch_inc(&msc->online_refs) == 0)
 			mpam_reset_msc(msc, true);
 	}
@@ -926,6 +972,9 @@ static int mpam_cpu_offline(unsigned int cpu)
 		if (!cpumask_test_cpu(cpu, &msc->accessibility))
 			continue;
 
+		if (msc->reenable_error_ppi)
+			disable_percpu_irq(msc->reenable_error_ppi);
+
 		if (atomic_dec_and_test(&msc->online_refs))
 			mpam_reset_msc(msc, false);
 	}
@@ -952,6 +1001,42 @@ static void mpam_register_cpuhp_callbacks(int (*online)(unsigned int online),
 	mutex_unlock(&mpam_cpuhp_state_lock);
 }
 
+static int __setup_ppi(struct mpam_msc *msc)
+{
+	int cpu;
+
+	msc->error_dev_id = alloc_percpu(struct mpam_msc *);
+	if (!msc->error_dev_id)
+		return -ENOMEM;
+
+	for_each_cpu(cpu, &msc->accessibility)
+		*per_cpu_ptr(msc->error_dev_id, cpu) = msc;
+
+	return 0;
+}
+
+static int mpam_msc_setup_error_irq(struct mpam_msc *msc)
+{
+	int irq;
+
+	irq = platform_get_irq_byname_optional(msc->pdev, "error");
+	if (irq <= 0)
+		return 0;
+
+	/* Allocate and initialise the percpu device pointer for PPI */
+	if (irq_is_percpu(irq))
+		return __setup_ppi(msc);
+
+	/* sanity check: shared interrupts can be routed anywhere? */
+	if (!cpumask_equal(&msc->accessibility, cpu_possible_mask)) {
+		pr_err_once("msc:%u is a private resource with a shared error interrupt",
+			    msc->id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /*
  * An MSC can control traffic from a set of CPUs, but may only be accessible
  * from a (hopefully wider) set of CPUs. The common reason for this is power
@@ -1028,6 +1113,9 @@ static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
 	if (err)
 		return ERR_PTR(err);
 
+	err = devm_mutex_init(dev, &msc->error_irq_lock);
+	if (err)
+		return ERR_PTR(err);
 	mpam_mon_sel_lock_init(msc);
 	msc->id = pdev->id;
 	msc->pdev = pdev;
@@ -1040,6 +1128,10 @@ static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
 		return ERR_PTR(-EINVAL);
 	}
 
+	err = mpam_msc_setup_error_irq(msc);
+	if (err)
+		return ERR_PTR(err);
+
 	if (device_property_read_u32(&pdev->dev, "pcc-channel", &tmp))
 		msc->iface = MPAM_IFACE_MMIO;
 	else
@@ -1313,8 +1405,177 @@ static void mpam_enable_merge_features(struct list_head *all_classes_list)
 	}
 }
 
+static char *mpam_errcode_names[16] = {
+	[MPAM_ERRCODE_NONE]			= "No error",
+	[MPAM_ERRCODE_PARTID_SEL_RANGE]		= "PARTID_SEL_Range",
+	[MPAM_ERRCODE_REQ_PARTID_RANGE]		= "Req_PARTID_Range",
+	[MPAM_ERRCODE_MSMONCFG_ID_RANGE]	= "MSMONCFG_ID_RANGE",
+	[MPAM_ERRCODE_REQ_PMG_RANGE]		= "Req_PMG_Range",
+	[MPAM_ERRCODE_MONITOR_RANGE]		= "Monitor_Range",
+	[MPAM_ERRCODE_INTPARTID_RANGE]		= "intPARTID_Range",
+	[MPAM_ERRCODE_UNEXPECTED_INTERNAL]	= "Unexpected_INTERNAL",
+	[MPAM_ERRCODE_UNDEFINED_RIS_PART_SEL]	= "Undefined_RIS_PART_SEL",
+	[MPAM_ERRCODE_RIS_NO_CONTROL]		= "RIS_No_Control",
+	[MPAM_ERRCODE_UNDEFINED_RIS_MON_SEL]	= "Undefined_RIS_MON_SEL",
+	[MPAM_ERRCODE_RIS_NO_MONITOR]		= "RIS_No_Monitor",
+	[12 ... 15] = "Reserved"
+};
+
+static int mpam_enable_msc_ecr(void *_msc)
+{
+	struct mpam_msc *msc = _msc;
+
+	__mpam_write_reg(msc, MPAMF_ECR, MPAMF_ECR_INTEN);
+
+	return 0;
+}
+
+/* This can run in mpam_disable(), and the interrupt handler on the same CPU */
+static int mpam_disable_msc_ecr(void *_msc)
+{
+	struct mpam_msc *msc = _msc;
+
+	__mpam_write_reg(msc, MPAMF_ECR, 0);
+
+	return 0;
+}
+
+static irqreturn_t __mpam_irq_handler(int irq, struct mpam_msc *msc)
+{
+	u64 reg;
+	u16 partid;
+	u8 errcode, pmg, ris;
+
+	if (WARN_ON_ONCE(!msc) ||
+	    WARN_ON_ONCE(!cpumask_test_cpu(smp_processor_id(),
+					   &msc->accessibility)))
+		return IRQ_NONE;
+
+	reg = mpam_msc_read_esr(msc);
+
+	errcode = FIELD_GET(MPAMF_ESR_ERRCODE, reg);
+	if (!errcode)
+		return IRQ_NONE;
+
+	/* Clear level triggered irq */
+	mpam_msc_clear_esr(msc);
+
+	partid = FIELD_GET(MPAMF_ESR_PARTID_MON, reg);
+	pmg = FIELD_GET(MPAMF_ESR_PMG, reg);
+	ris = FIELD_GET(MPAMF_ESR_RIS, reg);
+
+	pr_err_ratelimited("error irq from msc:%u '%s', partid:%u, pmg: %u, ris: %u\n",
+			   msc->id, mpam_errcode_names[errcode], partid, pmg,
+			   ris);
+
+	/* Disable this interrupt. */
+	mpam_disable_msc_ecr(msc);
+
+	/*
+	 * Schedule the teardown work. Don't use a threaded IRQ as we can't
+	 * unregister the interrupt from the threaded part of the handler.
+	 */
+	mpam_disable_reason = "hardware error interrupt";
+	schedule_work(&mpam_broken_work);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mpam_ppi_handler(int irq, void *dev_id)
+{
+	struct mpam_msc *msc = *(struct mpam_msc **)dev_id;
+
+	return __mpam_irq_handler(irq, msc);
+}
+
+static irqreturn_t mpam_spi_handler(int irq, void *dev_id)
+{
+	struct mpam_msc *msc = dev_id;
+
+	return __mpam_irq_handler(irq, msc);
+}
+
+static int mpam_register_irqs(void)
+{
+	int err, irq;
+	struct mpam_msc *msc;
+
+	lockdep_assert_cpus_held();
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		irq = platform_get_irq_byname_optional(msc->pdev, "error");
+		if (irq <= 0)
+			continue;
+
+		/* The MPAM spec says the interrupt can be SPI, PPI or LPI */
+		/* We anticipate sharing the interrupt with other MSCs */
+		if (irq_is_percpu(irq)) {
+			err = request_percpu_irq(irq, &mpam_ppi_handler,
+						 "mpam:msc:error",
+						 msc->error_dev_id);
+			if (err)
+				return err;
+
+			msc->reenable_error_ppi = irq;
+			smp_call_function_many(&msc->accessibility,
+					       &_enable_percpu_irq, &irq,
+					       true);
+		} else {
+			err = devm_request_irq(&msc->pdev->dev, irq,
+					       &mpam_spi_handler, IRQF_SHARED,
+					       "mpam:msc:error", msc);
+			if (err)
+				return err;
+		}
+
+		mutex_lock(&msc->error_irq_lock);
+		msc->error_irq_req = true;
+		mpam_touch_msc(msc, mpam_enable_msc_ecr, msc);
+		msc->error_irq_hw_enabled = true;
+		mutex_unlock(&msc->error_irq_lock);
+	}
+
+	return 0;
+}
+
+static void mpam_unregister_irqs(void)
+{
+	int irq;
+	struct mpam_msc *msc;
+
+	guard(cpus_read_lock)();
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		irq = platform_get_irq_byname_optional(msc->pdev, "error");
+		if (irq <= 0)
+			continue;
+
+		mutex_lock(&msc->error_irq_lock);
+		if (msc->error_irq_hw_enabled) {
+			mpam_touch_msc(msc, mpam_disable_msc_ecr, msc);
+			msc->error_irq_hw_enabled = false;
+		}
+
+		if (msc->error_irq_req) {
+			if (irq_is_percpu(irq)) {
+				msc->reenable_error_ppi = 0;
+				free_percpu_irq(irq, msc->error_dev_id);
+			} else {
+				devm_free_irq(&msc->pdev->dev, irq, msc);
+			}
+			msc->error_irq_req = false;
+		}
+		mutex_unlock(&msc->error_irq_lock);
+	}
+}
+
 static void mpam_enable_once(void)
 {
+	int err;
+
 	/*
 	 * Once the cpuhp callbacks have been changed, mpam_partid_max can no
 	 * longer change.
@@ -1323,9 +1584,26 @@ static void mpam_enable_once(void)
 	partid_max_published = true;
 	spin_unlock(&partid_max_lock);
 
+	/*
+	 * If all the MSC have been probed, enabling the IRQs happens next.
+	 * That involves cross-calling to a CPU that can reach the MSC, and
+	 * the locks must be taken in this order:
+	 */
+	cpus_read_lock();
 	mutex_lock(&mpam_list_lock);
 	mpam_enable_merge_features(&mpam_classes);
+
+	err = mpam_register_irqs();
+
 	mutex_unlock(&mpam_list_lock);
+	cpus_read_unlock();
+
+	if (err) {
+		pr_warn("Failed to register irqs: %d\n", err);
+		mpam_disable_reason = "Failed to enable.";
+		schedule_work(&mpam_broken_work);
+		return;
+	}
 
 	mpam_register_cpuhp_callbacks(mpam_cpu_online, mpam_cpu_offline,
 				      "mpam:online");
@@ -1393,6 +1671,8 @@ void mpam_disable(struct work_struct *ignored)
 	}
 	mutex_unlock(&mpam_cpuhp_state_lock);
 
+	mpam_unregister_irqs();
+
 	idx = srcu_read_lock(&mpam_srcu);
 	list_for_each_entry_srcu(class, &mpam_classes, classes_list,
 				 srcu_read_lock_held(&mpam_srcu))
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 1ad62f13bfb3..3002c8e6cabc 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -46,6 +46,11 @@ struct mpam_msc {
 	enum mpam_msc_iface	iface;
 	u32			nrdy_usec;
 	cpumask_t		accessibility;
+	bool			has_extd_esr;
+
+	int				reenable_error_ppi;
+	struct mpam_msc * __percpu	*error_dev_id;
+
 	atomic_t		online_refs;
 
 	/*
@@ -59,6 +64,14 @@ struct mpam_msc {
 	unsigned long		ris_idxs;
 	u32			ris_max;
 
+	/*
+	 * error_irq_lock is taken when registering/unregistering the error
+	 * interrupt and maniupulating the below flags.
+	 */
+	struct mutex		error_irq_lock;
+	bool			error_irq_req;
+	bool			error_irq_hw_enabled;
+
 	/* mpam_msc_ris of this component */
 	struct list_head	ris;
 
-- 
2.43.0

[PATCH v5 22/34] arm_mpam: Use a static key to indicate when mpam is enabled

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Once all the MSC have been probed, the system wide usable number of
PARTID is known and the configuration arrays can be allocated.

After this point, checking all the MSC have been probed is pointless,
and the cpuhp callbacks should restore the configuration, instead of
just resetting the MSC.

Add a static key to enable this behaviour. This will also allow MPAM
to be disabled in response to an error, and the architecture code to
enable/disable the context switch of the MPAM system registers.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_devices.c  | 12 ++++++++++++
 drivers/resctrl/mpam_internal.h |  8 ++++++++
 2 files changed, 20 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index adcde470067c..359c7ddc20bc 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -29,6 +29,8 @@
 
 #include "mpam_internal.h"
 
+DEFINE_STATIC_KEY_FALSE(mpam_enabled); /* This moves to arch code */
+
 /*
  * mpam_list_lock protects the SRCU lists when writing. Once the
  * mpam_enabled key is enabled these lists are read-only,
@@ -936,6 +938,9 @@ static int mpam_discovery_cpu_online(unsigned int cpu)
 	struct mpam_msc *msc;
 	bool new_device_probed = false;
 
+	if (mpam_is_enabled())
+		return 0;
+
 	guard(srcu)(&mpam_srcu);
 	list_for_each_entry_srcu(msc, &mpam_all_msc, all_msc_list,
 				 srcu_read_lock_held(&mpam_srcu)) {
@@ -1471,6 +1476,10 @@ static irqreturn_t __mpam_irq_handler(int irq, struct mpam_msc *msc)
 	/* Disable this interrupt. */
 	mpam_disable_msc_ecr(msc);
 
+	/* Are we racing with the thread disabling MPAM? */
+	if (!mpam_is_enabled())
+		return IRQ_HANDLED;
+
 	/*
 	 * Schedule the teardown work. Don't use a threaded IRQ as we can't
 	 * unregister the interrupt from the threaded part of the handler.
@@ -1605,6 +1614,7 @@ static void mpam_enable_once(void)
 		return;
 	}
 
+	static_branch_enable(&mpam_enabled);
 	mpam_register_cpuhp_callbacks(mpam_cpu_online, mpam_cpu_offline,
 				      "mpam:online");
 
@@ -1671,6 +1681,8 @@ void mpam_disable(struct work_struct *ignored)
 	}
 	mutex_unlock(&mpam_cpuhp_state_lock);
 
+	static_branch_disable(&mpam_enabled);
+
 	mpam_unregister_irqs();
 
 	idx = srcu_read_lock(&mpam_srcu);
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 3002c8e6cabc..c6937161877a 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -9,6 +9,7 @@
 #include <linux/bitmap.h>
 #include <linux/cpumask.h>
 #include <linux/io.h>
+#include <linux/jump_label.h>
 #include <linux/llist.h>
 #include <linux/mutex.h>
 #include <linux/srcu.h>
@@ -20,6 +21,13 @@
 
 struct platform_device;
 
+DECLARE_STATIC_KEY_FALSE(mpam_enabled);
+
+static inline bool mpam_is_enabled(void)
+{
+	return static_branch_likely(&mpam_enabled);
+}
+
 /*
  * Structures protected by SRCU may not be freed for a surprising amount of
  * time (especially if perf is running). To ensure the MPAM error interrupt can
-- 
2.43.0

[PATCH v5 23/34] arm_mpam: Allow configuration to be applied and restored during cpu online

[Ben Horgan]

From: James Morse <james.morse@arm.com>

When CPUs come online the MSC's original configuration should be restored.

Add struct mpam_config to hold the configuration. For each component, this
has a bitmap of features that have been changed from the reset values. The
mpam_config is also used on RIS reset where all bits are set to ensure all
features are reset.

Once the maximum partid is known, allocate a configuration array for each
component, and reprogram each RIS configuration from this.

CC: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Shaopeng Tan (Fujitsu) tan.shaopeng@fujitsu.com
Cc: Peter Newman peternewman@google.com
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Jonathan:
Use GENMASK instead of bitmap_set()
blank lines
clarify commit message

Gavin:
if formatting

Changes since v3:
Drop tags
Fix component reset, otherwise cpbm wrong and controls not set.
Add a cfg_lock to guard configuration of an msc
---
 drivers/resctrl/mpam_devices.c  | 288 +++++++++++++++++++++++++++++---
 drivers/resctrl/mpam_internal.h |  27 +++
 2 files changed, 290 insertions(+), 25 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 359c7ddc20bc..d511473f2886 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -145,6 +145,16 @@ static void mpam_free_garbage(void)
 	}
 }
 
+/*
+ * Once mpam is enabled, new requestors cannot further reduce the available
+ * partid. Assert that the size is fixed, and new requestors will be turned
+ * away.
+ */
+static void mpam_assert_partid_sizes_fixed(void)
+{
+	WARN_ON_ONCE(!partid_max_published);
+}
+
 static u32 __mpam_read_reg(struct mpam_msc *msc, u16 reg)
 {
 	WARN_ON_ONCE(!cpumask_test_cpu(smp_processor_id(), &msc->accessibility));
@@ -338,12 +348,16 @@ mpam_component_alloc(struct mpam_class *class, int id)
 	return comp;
 }
 
+static void __destroy_component_cfg(struct mpam_component *comp);
+
 static void mpam_component_destroy(struct mpam_component *comp)
 {
 	struct mpam_class *class = comp->class;
 
 	lockdep_assert_held(&mpam_list_lock);
 
+	__destroy_component_cfg(comp);
+
 	list_del_rcu(&comp->class_list);
 	add_to_garbage(comp);
 
@@ -819,31 +833,57 @@ static void mpam_reset_msc_bitmap(struct mpam_msc *msc, u16 reg, u16 wd)
 	__mpam_write_reg(msc, reg, bm);
 }
 
-static void mpam_reset_ris_partid(struct mpam_msc_ris *ris, u16 partid)
+/* Called via IPI. Call while holding an SRCU reference */
+static void mpam_reprogram_ris_partid(struct mpam_msc_ris *ris, u16 partid,
+				      struct mpam_config *cfg)
 {
 	struct mpam_msc *msc = ris->vmsc->msc;
 	struct mpam_props *rprops = &ris->props;
 
-	WARN_ON_ONCE(!srcu_read_lock_held((&mpam_srcu)));
-
 	mutex_lock(&msc->part_sel_lock);
 	__mpam_part_sel(ris->ris_idx, partid, msc);
 
-	if (mpam_has_feature(mpam_feat_cpor_part, rprops))
-		mpam_reset_msc_bitmap(msc, MPAMCFG_CPBM, rprops->cpbm_wd);
+	if (mpam_has_feature(mpam_feat_cpor_part, rprops) &&
+	    mpam_has_feature(mpam_feat_cpor_part, cfg)) {
+		if (cfg->reset_cpbm)
+			mpam_reset_msc_bitmap(msc, MPAMCFG_CPBM, rprops->cpbm_wd);
+		else
+			mpam_write_partsel_reg(msc, CPBM, cfg->cpbm);
+	}
 
-	if (mpam_has_feature(mpam_feat_mbw_part, rprops))
-		mpam_reset_msc_bitmap(msc, MPAMCFG_MBW_PBM, rprops->mbw_pbm_bits);
+	if (mpam_has_feature(mpam_feat_mbw_part, rprops) &&
+	    mpam_has_feature(mpam_feat_mbw_part, cfg)) {
+		if (cfg->reset_mbw_pbm)
+			mpam_reset_msc_bitmap(msc, MPAMCFG_MBW_PBM, rprops->mbw_pbm_bits);
+		else
+			mpam_write_partsel_reg(msc, MBW_PBM, cfg->mbw_pbm);
+	}
 
-	if (mpam_has_feature(mpam_feat_mbw_min, rprops))
+	if (mpam_has_feature(mpam_feat_mbw_min, rprops) &&
+	    mpam_has_feature(mpam_feat_mbw_min, cfg))
 		mpam_write_partsel_reg(msc, MBW_MIN, 0);
 
-	if (mpam_has_feature(mpam_feat_mbw_max, rprops))
-		mpam_write_partsel_reg(msc, MBW_MAX, MPAMCFG_MBW_MAX_MAX);
+	if (mpam_has_feature(mpam_feat_mbw_max, rprops) &&
+	    mpam_has_feature(mpam_feat_mbw_max, cfg)) {
+		if (cfg->reset_mbw_max)
+			mpam_write_partsel_reg(msc, MBW_MAX, MPAMCFG_MBW_MAX_MAX);
+		else
+			mpam_write_partsel_reg(msc, MBW_MAX, cfg->mbw_max);
+	}
 
 	mutex_unlock(&msc->part_sel_lock);
 }
 
+static void mpam_init_reset_cfg(struct mpam_config *reset_cfg)
+{
+	*reset_cfg = (struct mpam_config) {
+		.reset_cpbm = true,
+		.reset_mbw_pbm = true,
+		.reset_mbw_max = true,
+	};
+	bitmap_fill(reset_cfg->features, MPAM_FEATURE_LAST);
+}
+
 /*
  * Called via smp_call_on_cpu() to prevent migration, while still being
  * pre-emptible. Caller must hold mpam_srcu.
@@ -851,16 +891,19 @@ static void mpam_reset_ris_partid(struct mpam_msc_ris *ris, u16 partid)
 static int mpam_reset_ris(void *arg)
 {
 	u16 partid, partid_max;
+	struct mpam_config reset_cfg;
 	struct mpam_msc_ris *ris = arg;
 
 	if (ris->in_reset_state)
 		return 0;
 
+	mpam_init_reset_cfg(&reset_cfg);
+
 	spin_lock(&partid_max_lock);
 	partid_max = mpam_partid_max;
 	spin_unlock(&partid_max_lock);
 	for (partid = 0; partid <= partid_max; partid++)
-		mpam_reset_ris_partid(ris, partid);
+		mpam_reprogram_ris_partid(ris, partid, &reset_cfg);
 
 	return 0;
 }
@@ -889,19 +932,58 @@ static int mpam_touch_msc(struct mpam_msc *msc, int (*fn)(void *a), void *arg)
 	return smp_call_on_cpu(mpam_get_msc_preferred_cpu(msc), fn, arg, true);
 }
 
-static void mpam_reset_msc(struct mpam_msc *msc, bool online)
+struct mpam_write_config_arg {
+	struct mpam_msc_ris *ris;
+	struct mpam_component *comp;
+	u16 partid;
+};
+
+static int __write_config(void *arg)
+{
+	struct mpam_write_config_arg *c = arg;
+
+	mpam_reprogram_ris_partid(c->ris, c->partid, &c->comp->cfg[c->partid]);
+
+	return 0;
+}
+
+static void mpam_reprogram_msc(struct mpam_msc *msc)
 {
+	u16 partid;
+	bool reset;
+	struct mpam_config *cfg;
 	struct mpam_msc_ris *ris;
+	struct mpam_write_config_arg arg;
+
+	/*
+	 * No lock for mpam_partid_max as partid_max_published has been
+	 * set by mpam_enabled(), so the values can no longer change.
+	 */
+	mpam_assert_partid_sizes_fixed();
 
-	list_for_each_entry_srcu(ris, &msc->ris, msc_list, srcu_read_lock_held(&mpam_srcu)) {
-		mpam_touch_msc(msc, &mpam_reset_ris, ris);
+	mutex_lock(&msc->cfg_lock);
+	list_for_each_entry_srcu(ris, &msc->ris, msc_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		if (!mpam_is_enabled() && !ris->in_reset_state) {
+			mpam_touch_msc(msc, &mpam_reset_ris, ris);
+			ris->in_reset_state = true;
+			continue;
+		}
 
-		/*
-		 * Set in_reset_state when coming online. The reset state
-		 * for non-zero partid may be lost while the CPUs are offline.
-		 */
-		ris->in_reset_state = online;
+		arg.comp = ris->vmsc->comp;
+		arg.ris = ris;
+		reset = true;
+		for (partid = 0; partid <= mpam_partid_max; partid++) {
+			cfg = &ris->vmsc->comp->cfg[partid];
+			if (!bitmap_empty(cfg->features, MPAM_FEATURE_LAST))
+				reset = false;
+
+			arg.partid = partid;
+			mpam_touch_msc(msc, __write_config, &arg);
+		}
+		ris->in_reset_state = reset;
 	}
+	mutex_unlock(&msc->cfg_lock);
 }
 
 static void _enable_percpu_irq(void *_irq)
@@ -925,7 +1007,7 @@ static int mpam_cpu_online(unsigned int cpu)
 			_enable_percpu_irq(&msc->reenable_error_ppi);
 
 		if (atomic_fetch_inc(&msc->online_refs) == 0)
-			mpam_reset_msc(msc, true);
+			mpam_reprogram_msc(msc);
 	}
 
 	return 0;
@@ -980,8 +1062,22 @@ static int mpam_cpu_offline(unsigned int cpu)
 		if (msc->reenable_error_ppi)
 			disable_percpu_irq(msc->reenable_error_ppi);
 
-		if (atomic_dec_and_test(&msc->online_refs))
-			mpam_reset_msc(msc, false);
+		if (atomic_dec_and_test(&msc->online_refs)) {
+			struct mpam_msc_ris *ris;
+
+			mutex_lock(&msc->cfg_lock);
+			list_for_each_entry_srcu(ris, &msc->ris, msc_list,
+						 srcu_read_lock_held(&mpam_srcu)) {
+				mpam_touch_msc(msc, &mpam_reset_ris, ris);
+
+				/*
+				 * The reset state for non-zero partid may be
+				 * lost while the CPUs are offline.
+				 */
+				ris->in_reset_state = false;
+			}
+			mutex_unlock(&msc->cfg_lock);
+		}
 	}
 
 	return 0;
@@ -1121,6 +1217,11 @@ static struct mpam_msc *do_mpam_msc_drv_probe(struct platform_device *pdev)
 	err = devm_mutex_init(dev, &msc->error_irq_lock);
 	if (err)
 		return ERR_PTR(err);
+
+	err = devm_mutex_init(dev, &msc->cfg_lock);
+	if (err)
+		return ERR_PTR(err);
+
 	mpam_mon_sel_lock_init(msc);
 	msc->id = pdev->id;
 	msc->pdev = pdev;
@@ -1581,6 +1682,72 @@ static void mpam_unregister_irqs(void)
 	}
 }
 
+static void __destroy_component_cfg(struct mpam_component *comp)
+{
+	add_to_garbage(comp->cfg);
+}
+
+static void mpam_reset_component_cfg(struct mpam_component *comp)
+{
+	int i;
+	struct mpam_props *cprops = &comp->class->props;
+
+	mpam_assert_partid_sizes_fixed();
+
+	if (!comp->cfg)
+		return;
+
+	for (i = 0; i <= mpam_partid_max; i++) {
+		comp->cfg[i] = (struct mpam_config) {};
+		if (cprops->cpbm_wd)
+			comp->cfg[i].cpbm = GENMASK(cprops->cpbm_wd - 1, 0);
+		if (cprops->mbw_pbm_bits)
+			comp->cfg[i].mbw_pbm = GENMASK(cprops->mbw_pbm_bits - 1, 0);
+		if (cprops->bwa_wd)
+			comp->cfg[i].mbw_max = GENMASK(15, 16 - cprops->bwa_wd);
+	}
+}
+
+static int __allocate_component_cfg(struct mpam_component *comp)
+{
+	mpam_assert_partid_sizes_fixed();
+
+	if (comp->cfg)
+		return 0;
+
+	comp->cfg = kcalloc(mpam_partid_max + 1, sizeof(*comp->cfg), GFP_KERNEL);
+	if (!comp->cfg)
+		return -ENOMEM;
+
+	/*
+	 * The array is free()d in one go, so only cfg[0]'s structure needs
+	 * to be initialised.
+	 */
+	init_garbage(&comp->cfg[0].garbage);
+
+	mpam_reset_component_cfg(comp);
+
+	return 0;
+}
+
+static int mpam_allocate_config(void)
+{
+	struct mpam_class *class;
+	struct mpam_component *comp;
+
+	lockdep_assert_held(&mpam_list_lock);
+
+	list_for_each_entry(class, &mpam_classes, classes_list) {
+		list_for_each_entry(comp, &class->components, class_list) {
+			int err = __allocate_component_cfg(comp);
+			if (err)
+				return err;
+		}
+	}
+
+	return 0;
+}
+
 static void mpam_enable_once(void)
 {
 	int err;
@@ -1600,15 +1767,25 @@ static void mpam_enable_once(void)
 	 */
 	cpus_read_lock();
 	mutex_lock(&mpam_list_lock);
-	mpam_enable_merge_features(&mpam_classes);
+	do {
+		mpam_enable_merge_features(&mpam_classes);
 
-	err = mpam_register_irqs();
+		err = mpam_register_irqs();
+		if (err) {
+			pr_warn("Failed to register irqs: %d\n", err);
+			break;
+		}
 
+		err = mpam_allocate_config();
+		if (err) {
+			pr_err("Failed to allocate configuration arrays.\n");
+			break;
+		}
+	} while (0);
 	mutex_unlock(&mpam_list_lock);
 	cpus_read_unlock();
 
 	if (err) {
-		pr_warn("Failed to register irqs: %d\n", err);
 		mpam_disable_reason = "Failed to enable.";
 		schedule_work(&mpam_broken_work);
 		return;
@@ -1628,6 +1805,9 @@ static void mpam_reset_component_locked(struct mpam_component *comp)
 	struct mpam_vmsc *vmsc;
 
 	lockdep_assert_cpus_held();
+	mpam_assert_partid_sizes_fixed();
+
+	mpam_reset_component_cfg(comp);
 
 	guard(srcu)(&mpam_srcu);
 	list_for_each_entry_srcu(vmsc, &comp->vmsc, comp_list,
@@ -1728,6 +1908,64 @@ void mpam_enable(struct work_struct *work)
 		mpam_enable_once();
 }
 
+#define maybe_update_config(cfg, feature, newcfg, member, changes) do { \
+	if (mpam_has_feature(feature, newcfg) &&			\
+	    (newcfg)->member != (cfg)->member) {			\
+		(cfg)->member = (newcfg)->member;			\
+		mpam_set_feature(feature, cfg);				\
+									\
+		(changes) = true;					\
+	}								\
+} while (0)
+
+static bool mpam_update_config(struct mpam_config *cfg,
+			       const struct mpam_config *newcfg)
+{
+	bool has_changes = false;
+
+	maybe_update_config(cfg, mpam_feat_cpor_part, newcfg, cpbm, has_changes);
+	maybe_update_config(cfg, mpam_feat_mbw_part, newcfg, mbw_pbm, has_changes);
+	maybe_update_config(cfg, mpam_feat_mbw_max, newcfg, mbw_max, has_changes);
+
+	return has_changes;
+}
+
+int mpam_apply_config(struct mpam_component *comp, u16 partid,
+		      struct mpam_config *cfg)
+{
+	struct mpam_write_config_arg arg;
+	struct mpam_msc_ris *ris;
+	struct mpam_vmsc *vmsc;
+	struct mpam_msc *msc;
+
+	lockdep_assert_cpus_held();
+
+	/* Don't pass in the current config! */
+	WARN_ON_ONCE(&comp->cfg[partid] == cfg);
+
+	if (!mpam_update_config(&comp->cfg[partid], cfg))
+		return 0;
+
+	arg.comp = comp;
+	arg.partid = partid;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(vmsc, &comp->vmsc, comp_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		msc = vmsc->msc;
+
+		mutex_lock(&msc->cfg_lock);
+		list_for_each_entry_srcu(ris, &vmsc->ris, vmsc_list,
+					 srcu_read_lock_held(&mpam_srcu)) {
+			arg.ris = ris;
+			mpam_touch_msc(msc, __write_config, &arg);
+		}
+		mutex_unlock(&msc->cfg_lock);
+	}
+
+	return 0;
+}
+
 static int __init mpam_msc_driver_init(void)
 {
 	if (!system_supports_mpam())
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index c6937161877a..842d32f148b5 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -91,6 +91,9 @@ struct mpam_msc {
 	 */
 	struct mutex		part_sel_lock;
 
+	/* cfg_lock protects the msc configuration. */
+	struct mutex		cfg_lock;
+
 	/*
 	 * mon_sel_lock protects access to the MSC hardware registers that are
 	 * affected by MPAMCFG_MON_SEL, and the mbwu_state.
@@ -180,6 +183,21 @@ struct mpam_class {
 	struct mpam_garbage	garbage;
 };
 
+struct mpam_config {
+	/* Which configuration values are valid. */
+	DECLARE_BITMAP(features, MPAM_FEATURE_LAST);
+
+	u32	cpbm;
+	u32	mbw_pbm;
+	u16	mbw_max;
+
+	bool	reset_cpbm;
+	bool	reset_mbw_pbm;
+	bool	reset_mbw_max;
+
+	struct mpam_garbage	garbage;
+};
+
 struct mpam_component {
 	u32			comp_id;
 
@@ -188,6 +206,12 @@ struct mpam_component {
 
 	cpumask_t		affinity;
 
+	/*
+	 * Array of configuration values, indexed by partid.
+	 * Read from cpuhp callbacks, hold the cpuhp lock when writing.
+	 */
+	struct mpam_config	*cfg;
+
 	/* member of mpam_class:components */
 	struct list_head	class_list;
 
@@ -247,6 +271,9 @@ extern u8 mpam_pmg_max;
 void mpam_enable(struct work_struct *work);
 void mpam_disable(struct work_struct *work);
 
+int mpam_apply_config(struct mpam_component *comp, u16 partid,
+		      struct mpam_config *cfg);
+
 int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
 				   cpumask_t *affinity);
 
-- 
2.43.0

[PATCH v5 24/34] arm_mpam: Probe and reset the rest of the features

[Ben Horgan]

From: James Morse <james.morse@arm.com>

MPAM supports more features than are going to be exposed to resctrl.
For partid other than 0, the reset values of these controls isn't
known.

Discover the rest of the features so they can be reset to avoid any
side effects when resctrl is in use.

PARTID narrowing allows MSC/RIS to support less configuration space than
is usable. If this feature is found on a class of device we are likely
to use, then reduce the partid_max to make it usable. This allows us
to map a PARTID to itself.

CC: Rohit Mathew <Rohit.Mathew@arm.com>
CC: Zeng Heng <zengheng4@huawei.com>
CC: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
enum order and commas
---
 drivers/resctrl/mpam_devices.c  | 188 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |  18 +++
 2 files changed, 206 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index d511473f2886..fe51ede1a1a6 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -259,6 +259,15 @@ static void __mpam_part_sel(u8 ris_idx, u16 partid, struct mpam_msc *msc)
 	__mpam_part_sel_raw(partsel, msc);
 }
 
+static void __mpam_intpart_sel(u8 ris_idx, u16 intpartid, struct mpam_msc *msc)
+{
+	u32 partsel = FIELD_PREP(MPAMCFG_PART_SEL_RIS, ris_idx) |
+		      FIELD_PREP(MPAMCFG_PART_SEL_PARTID_SEL, intpartid) |
+		      MPAMCFG_PART_SEL_INTERNAL;
+
+	__mpam_part_sel_raw(partsel, msc);
+}
+
 int mpam_register_requestor(u16 partid_max, u8 pmg_max)
 {
 	guard(spinlock)(&partid_max_lock);
@@ -656,10 +665,34 @@ static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
 	struct mpam_msc *msc = ris->vmsc->msc;
 	struct device *dev = &msc->pdev->dev;
 	struct mpam_props *props = &ris->props;
+	struct mpam_class *class = ris->vmsc->comp->class;
 
 	lockdep_assert_held(&msc->probe_lock);
 	lockdep_assert_held(&msc->part_sel_lock);
 
+	/* Cache Capacity Partitioning */
+	if (FIELD_GET(MPAMF_IDR_HAS_CCAP_PART, ris->idr)) {
+		u32 ccap_features = mpam_read_partsel_reg(msc, CCAP_IDR);
+
+		props->cmax_wd = FIELD_GET(MPAMF_CCAP_IDR_CMAX_WD, ccap_features);
+		if (props->cmax_wd &&
+		    FIELD_GET(MPAMF_CCAP_IDR_HAS_CMAX_SOFTLIM, ccap_features))
+			mpam_set_feature(mpam_feat_cmax_softlim, props);
+
+		if (props->cmax_wd &&
+		    !FIELD_GET(MPAMF_CCAP_IDR_NO_CMAX, ccap_features))
+			mpam_set_feature(mpam_feat_cmax_cmax, props);
+
+		if (props->cmax_wd &&
+		    FIELD_GET(MPAMF_CCAP_IDR_HAS_CMIN, ccap_features))
+			mpam_set_feature(mpam_feat_cmax_cmin, props);
+
+		props->cassoc_wd = FIELD_GET(MPAMF_CCAP_IDR_CASSOC_WD, ccap_features);
+		if (props->cassoc_wd &&
+		    FIELD_GET(MPAMF_CCAP_IDR_HAS_CASSOC, ccap_features))
+			mpam_set_feature(mpam_feat_cmax_cassoc, props);
+	}
+
 	/* Cache Portion partitioning */
 	if (FIELD_GET(MPAMF_IDR_HAS_CPOR_PART, ris->idr)) {
 		u32 cpor_features = mpam_read_partsel_reg(msc, CPOR_IDR);
@@ -682,6 +715,31 @@ static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
 		props->bwa_wd = FIELD_GET(MPAMF_MBW_IDR_BWA_WD, mbw_features);
 		if (props->bwa_wd && FIELD_GET(MPAMF_MBW_IDR_HAS_MAX, mbw_features))
 			mpam_set_feature(mpam_feat_mbw_max, props);
+
+		if (props->bwa_wd && FIELD_GET(MPAMF_MBW_IDR_HAS_MIN, mbw_features))
+			mpam_set_feature(mpam_feat_mbw_min, props);
+
+		if (props->bwa_wd && FIELD_GET(MPAMF_MBW_IDR_HAS_PROP, mbw_features))
+			mpam_set_feature(mpam_feat_mbw_prop, props);
+	}
+
+	/* Priority partitioning */
+	if (FIELD_GET(MPAMF_IDR_HAS_PRI_PART, ris->idr)) {
+		u32 pri_features = mpam_read_partsel_reg(msc, PRI_IDR);
+
+		props->intpri_wd = FIELD_GET(MPAMF_PRI_IDR_INTPRI_WD, pri_features);
+		if (props->intpri_wd && FIELD_GET(MPAMF_PRI_IDR_HAS_INTPRI, pri_features)) {
+			mpam_set_feature(mpam_feat_intpri_part, props);
+			if (FIELD_GET(MPAMF_PRI_IDR_INTPRI_0_IS_LOW, pri_features))
+				mpam_set_feature(mpam_feat_intpri_part_0_low, props);
+		}
+
+		props->dspri_wd = FIELD_GET(MPAMF_PRI_IDR_DSPRI_WD, pri_features);
+		if (props->dspri_wd && FIELD_GET(MPAMF_PRI_IDR_HAS_DSPRI, pri_features)) {
+			mpam_set_feature(mpam_feat_dspri_part, props);
+			if (FIELD_GET(MPAMF_PRI_IDR_DSPRI_0_IS_LOW, pri_features))
+				mpam_set_feature(mpam_feat_dspri_part_0_low, props);
+		}
 	}
 
 	/* Performance Monitoring */
@@ -706,6 +764,9 @@ static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
 
 				mpam_set_feature(mpam_feat_msmon_csu, props);
 
+				if (FIELD_GET(MPAMF_CSUMON_IDR_HAS_XCL, csumonidr))
+					mpam_set_feature(mpam_feat_msmon_csu_xcl, props);
+
 				/* Is NRDY hardware managed? */
 				hw_managed = mpam_ris_hw_probe_hw_nrdy(ris, CSU);
 				if (hw_managed)
@@ -727,6 +788,9 @@ static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
 			if (props->num_mbwu_mon)
 				mpam_set_feature(mpam_feat_msmon_mbwu, props);
 
+			if (FIELD_GET(MPAMF_MBWUMON_IDR_HAS_RWBW, mbwumon_idr))
+				mpam_set_feature(mpam_feat_msmon_mbwu_rwbw, props);
+
 			/* Is NRDY hardware managed? */
 			hw_managed = mpam_ris_hw_probe_hw_nrdy(ris, MBWU);
 			if (hw_managed)
@@ -738,6 +802,21 @@ static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
 			 */
 		}
 	}
+
+	/*
+	 * RIS with PARTID narrowing don't have enough storage for one
+	 * configuration per PARTID. If these are in a class we could use,
+	 * reduce the supported partid_max to match the number of intpartid.
+	 * If the class is unknown, just ignore it.
+	 */
+	if (FIELD_GET(MPAMF_IDR_HAS_PARTID_NRW, ris->idr) &&
+	    class->type != MPAM_CLASS_UNKNOWN) {
+		u32 nrwidr = mpam_read_partsel_reg(msc, PARTID_NRW_IDR);
+		u16 partid_max = FIELD_GET(MPAMF_PARTID_NRW_IDR_INTPARTID_MAX, nrwidr);
+
+		mpam_set_feature(mpam_feat_partid_nrw, props);
+		msc->partid_max = min(msc->partid_max, partid_max);
+	}
 }
 
 static int mpam_msc_hw_probe(struct mpam_msc *msc)
@@ -837,12 +916,28 @@ static void mpam_reset_msc_bitmap(struct mpam_msc *msc, u16 reg, u16 wd)
 static void mpam_reprogram_ris_partid(struct mpam_msc_ris *ris, u16 partid,
 				      struct mpam_config *cfg)
 {
+	u32 pri_val = 0;
+	u16 cmax = MPAMCFG_CMAX_CMAX;
 	struct mpam_msc *msc = ris->vmsc->msc;
 	struct mpam_props *rprops = &ris->props;
+	u16 dspri = GENMASK(rprops->dspri_wd, 0);
+	u16 intpri = GENMASK(rprops->intpri_wd, 0);
 
 	mutex_lock(&msc->part_sel_lock);
 	__mpam_part_sel(ris->ris_idx, partid, msc);
 
+	if (mpam_has_feature(mpam_feat_partid_nrw, rprops)) {
+		/* Update the intpartid mapping */
+		mpam_write_partsel_reg(msc, INTPARTID,
+				       MPAMCFG_INTPARTID_INTERNAL | partid);
+
+		/*
+		 * Then switch to the 'internal' partid to update the
+		 * configuration.
+		 */
+		__mpam_intpart_sel(ris->ris_idx, partid, msc);
+	}
+
 	if (mpam_has_feature(mpam_feat_cpor_part, rprops) &&
 	    mpam_has_feature(mpam_feat_cpor_part, cfg)) {
 		if (cfg->reset_cpbm)
@@ -871,6 +966,35 @@ static void mpam_reprogram_ris_partid(struct mpam_msc_ris *ris, u16 partid,
 			mpam_write_partsel_reg(msc, MBW_MAX, cfg->mbw_max);
 	}
 
+	if (mpam_has_feature(mpam_feat_mbw_prop, rprops) &&
+	    mpam_has_feature(mpam_feat_mbw_prop, cfg))
+		mpam_write_partsel_reg(msc, MBW_PROP, 0);
+
+	if (mpam_has_feature(mpam_feat_cmax_cmax, rprops))
+		mpam_write_partsel_reg(msc, CMAX, cmax);
+
+	if (mpam_has_feature(mpam_feat_cmax_cmin, rprops))
+		mpam_write_partsel_reg(msc, CMIN, 0);
+
+	if (mpam_has_feature(mpam_feat_cmax_cassoc, rprops))
+		mpam_write_partsel_reg(msc, CASSOC, MPAMCFG_CASSOC_CASSOC);
+
+	if (mpam_has_feature(mpam_feat_intpri_part, rprops) ||
+	    mpam_has_feature(mpam_feat_dspri_part, rprops)) {
+		/* aces high? */
+		if (!mpam_has_feature(mpam_feat_intpri_part_0_low, rprops))
+			intpri = 0;
+		if (!mpam_has_feature(mpam_feat_dspri_part_0_low, rprops))
+			dspri = 0;
+
+		if (mpam_has_feature(mpam_feat_intpri_part, rprops))
+			pri_val |= FIELD_PREP(MPAMCFG_PRI_INTPRI, intpri);
+		if (mpam_has_feature(mpam_feat_dspri_part, rprops))
+			pri_val |= FIELD_PREP(MPAMCFG_PRI_DSPRI, dspri);
+
+		mpam_write_partsel_reg(msc, PRI, pri_val);
+	}
+
 	mutex_unlock(&msc->part_sel_lock);
 }
 
@@ -1308,6 +1432,18 @@ static bool mpam_has_bwa_wd_feature(struct mpam_props *props)
 		return true;
 	if (mpam_has_feature(mpam_feat_mbw_max, props))
 		return true;
+	if (mpam_has_feature(mpam_feat_mbw_prop, props))
+		return true;
+	return false;
+}
+
+/* Any of these features mean the CMAX_WD field is valid. */
+static bool mpam_has_cmax_wd_feature(struct mpam_props *props)
+{
+	if (mpam_has_feature(mpam_feat_cmax_cmax, props))
+		return true;
+	if (mpam_has_feature(mpam_feat_cmax_cmin, props))
+		return true;
 	return false;
 }
 
@@ -1366,6 +1502,23 @@ static void __props_mismatch(struct mpam_props *parent,
 		parent->bwa_wd = min(parent->bwa_wd, child->bwa_wd);
 	}
 
+	if (alias && !mpam_has_cmax_wd_feature(parent) && mpam_has_cmax_wd_feature(child)) {
+		parent->cmax_wd = child->cmax_wd;
+	} else if (MISMATCHED_HELPER(parent, child, mpam_has_cmax_wd_feature,
+				     cmax_wd, alias)) {
+		pr_debug("%s took the min cmax_wd\n", __func__);
+		parent->cmax_wd = min(parent->cmax_wd, child->cmax_wd);
+	}
+
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_cmax_cassoc, alias)) {
+		parent->cassoc_wd = child->cassoc_wd;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_cmax_cassoc,
+				   cassoc_wd, alias)) {
+		pr_debug("%s cleared cassoc_wd\n", __func__);
+		mpam_clear_feature(mpam_feat_cmax_cassoc, parent);
+		parent->cassoc_wd = 0;
+	}
+
 	/* For num properties, take the minimum */
 	if (CAN_MERGE_FEAT(parent, child, mpam_feat_msmon_csu, alias)) {
 		parent->num_csu_mon = child->num_csu_mon;
@@ -1385,6 +1538,41 @@ static void __props_mismatch(struct mpam_props *parent,
 					   child->num_mbwu_mon);
 	}
 
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_intpri_part, alias)) {
+		parent->intpri_wd = child->intpri_wd;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_intpri_part,
+				   intpri_wd, alias)) {
+		pr_debug("%s took the min intpri_wd\n", __func__);
+		parent->intpri_wd = min(parent->intpri_wd, child->intpri_wd);
+	}
+
+	if (CAN_MERGE_FEAT(parent, child, mpam_feat_dspri_part, alias)) {
+		parent->dspri_wd = child->dspri_wd;
+	} else if (MISMATCHED_FEAT(parent, child, mpam_feat_dspri_part,
+				   dspri_wd, alias)) {
+		pr_debug("%s took the min dspri_wd\n", __func__);
+		parent->dspri_wd = min(parent->dspri_wd, child->dspri_wd);
+	}
+
+	/* TODO: alias support for these two */
+	/* {int,ds}pri may not have differing 0-low behaviour */
+	if (mpam_has_feature(mpam_feat_intpri_part, parent) &&
+	    (!mpam_has_feature(mpam_feat_intpri_part, child) ||
+	     mpam_has_feature(mpam_feat_intpri_part_0_low, parent) !=
+	     mpam_has_feature(mpam_feat_intpri_part_0_low, child))) {
+		pr_debug("%s cleared intpri_part\n", __func__);
+		mpam_clear_feature(mpam_feat_intpri_part, parent);
+		mpam_clear_feature(mpam_feat_intpri_part_0_low, parent);
+	}
+	if (mpam_has_feature(mpam_feat_dspri_part, parent) &&
+	    (!mpam_has_feature(mpam_feat_dspri_part, child) ||
+	     mpam_has_feature(mpam_feat_dspri_part_0_low, parent) !=
+	     mpam_has_feature(mpam_feat_dspri_part_0_low, child))) {
+		pr_debug("%s cleared dspri_part\n", __func__);
+		mpam_clear_feature(mpam_feat_dspri_part, parent);
+		mpam_clear_feature(mpam_feat_dspri_part_0_low, parent);
+	}
+
 	if (alias) {
 		/* Merge features for aliased resources */
 		bitmap_or(parent->features, parent->features, child->features, MPAM_FEATURE_LAST);
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 842d32f148b5..b947f30fbf14 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -141,14 +141,28 @@ static inline void mpam_mon_sel_lock_init(struct mpam_msc *msc)
 /* Bits for mpam features bitmaps */
 enum mpam_device_features {
 	mpam_feat_cpor_part,
+	mpam_feat_cmax_softlim,
+	mpam_feat_cmax_cmax,
+	mpam_feat_cmax_cmin,
+	mpam_feat_cmax_cassoc,
 	mpam_feat_mbw_part,
 	mpam_feat_mbw_min,
 	mpam_feat_mbw_max,
+	mpam_feat_mbw_prop,
+	mpam_feat_intpri_part,
+	mpam_feat_intpri_part_0_low,
+	mpam_feat_dspri_part,
+	mpam_feat_dspri_part_0_low,
 	mpam_feat_msmon,
 	mpam_feat_msmon_csu,
+	mpam_feat_msmon_csu_capture,
+	mpam_feat_msmon_csu_xcl,
 	mpam_feat_msmon_csu_hw_nrdy,
 	mpam_feat_msmon_mbwu,
+	mpam_feat_msmon_mbwu_capture,
+	mpam_feat_msmon_mbwu_rwbw,
 	mpam_feat_msmon_mbwu_hw_nrdy,
+	mpam_feat_partid_nrw,
 	MPAM_FEATURE_LAST
 };
 
@@ -158,6 +172,10 @@ struct mpam_props {
 	u16			cpbm_wd;
 	u16			mbw_pbm_bits;
 	u16			bwa_wd;
+	u16			cmax_wd;
+	u16			cassoc_wd;
+	u16			intpri_wd;
+	u16			dspri_wd;
 	u16			num_csu_mon;
 	u16			num_mbwu_mon;
 };
-- 
2.43.0

[PATCH v5 25/34] arm_mpam: Add helpers to allocate monitors

[Ben Horgan]

From: James Morse <james.morse@arm.com>

MPAM's MSC support a number of monitors, each of which supports
bandwidth counters, or cache-storage-utilisation counters. To use
a counter, a monitor needs to be configured. Add helpers to allocate
and free CSU or MBWU monitors.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_devices.c  |  2 ++
 drivers/resctrl/mpam_internal.h | 35 +++++++++++++++++++++++++++++++++
 2 files changed, 37 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index fe51ede1a1a6..d2d12a94a071 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -305,6 +305,8 @@ mpam_class_alloc(u8 level_idx, enum mpam_class_types type)
 	class->level = level_idx;
 	class->type = type;
 	INIT_LIST_HEAD_RCU(&class->classes_list);
+	ida_init(&class->ida_csu_mon);
+	ida_init(&class->ida_mbwu_mon);
 
 	list_add_rcu(&class->classes_list, &mpam_classes);
 
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index b947f30fbf14..e59c0f4d9ada 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -198,6 +198,9 @@ struct mpam_class {
 	/* member of mpam_classes */
 	struct list_head	classes_list;
 
+	struct ida		ida_csu_mon;
+	struct ida		ida_mbwu_mon;
+
 	struct mpam_garbage	garbage;
 };
 
@@ -277,6 +280,38 @@ struct mpam_msc_ris {
 	struct mpam_garbage	garbage;
 };
 
+static inline int mpam_alloc_csu_mon(struct mpam_class *class)
+{
+	struct mpam_props *cprops = &class->props;
+
+	if (!mpam_has_feature(mpam_feat_msmon_csu, cprops))
+		return -EOPNOTSUPP;
+
+	return ida_alloc_max(&class->ida_csu_mon, cprops->num_csu_mon - 1,
+			     GFP_KERNEL);
+}
+
+static inline void mpam_free_csu_mon(struct mpam_class *class, int csu_mon)
+{
+	ida_free(&class->ida_csu_mon, csu_mon);
+}
+
+static inline int mpam_alloc_mbwu_mon(struct mpam_class *class)
+{
+	struct mpam_props *cprops = &class->props;
+
+	if (!mpam_has_feature(mpam_feat_msmon_mbwu, cprops))
+		return -EOPNOTSUPP;
+
+	return ida_alloc_max(&class->ida_mbwu_mon, cprops->num_mbwu_mon - 1,
+			     GFP_KERNEL);
+}
+
+static inline void mpam_free_mbwu_mon(struct mpam_class *class, int mbwu_mon)
+{
+	ida_free(&class->ida_mbwu_mon, mbwu_mon);
+}
+
 /* List of all classes - protected by srcu*/
 extern struct srcu_struct mpam_srcu;
 extern struct list_head mpam_classes;
-- 
2.43.0

[PATCH v5 26/34] arm_mpam: Add mpam_msmon_read() to read monitor value

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Reading a monitor involves configuring what you want to monitor, and
reading the value. Components made up of multiple MSC may need values
from each MSC. MSCs may take time to configure, returning 'not ready'.
The maximum 'not ready' time should have been provided by firmware.

Add mpam_msmon_read() to hide all this. If (one of) the MSC returns
not ready, then wait the full timeout value before trying again.

CC: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v4:
Gavin:
if formatting
break rather than return in switch statements
warn if unexpected monitor type

Changes since v3:
Add tag - thanks
Bring config_mismatch into this commit (Jonathan)
whitespace
---
 drivers/resctrl/mpam_devices.c  | 235 ++++++++++++++++++++++++++++++++
 drivers/resctrl/mpam_internal.h |  19 +++
 2 files changed, 254 insertions(+)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index d2d12a94a071..b229e820673c 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -886,6 +886,241 @@ static int mpam_msc_hw_probe(struct mpam_msc *msc)
 	return 0;
 }
 
+struct mon_read {
+	struct mpam_msc_ris		*ris;
+	struct mon_cfg			*ctx;
+	enum mpam_device_features	type;
+	u64				*val;
+	int				err;
+};
+
+static void gen_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
+				   u32 *flt_val)
+{
+	struct mon_cfg *ctx = m->ctx;
+
+	/*
+	 * For CSU counters its implementation-defined what happens when not
+	 * filtering by partid.
+	 */
+	*ctl_val = MSMON_CFG_x_CTL_MATCH_PARTID;
+
+	*flt_val = FIELD_PREP(MSMON_CFG_x_FLT_PARTID, ctx->partid);
+
+	if (m->ctx->match_pmg) {
+		*ctl_val |= MSMON_CFG_x_CTL_MATCH_PMG;
+		*flt_val |= FIELD_PREP(MSMON_CFG_x_FLT_PMG, ctx->pmg);
+	}
+
+	switch (m->type) {
+	case mpam_feat_msmon_csu:
+		*ctl_val |= MSMON_CFG_CSU_CTL_TYPE_CSU;
+
+		if (mpam_has_feature(mpam_feat_msmon_csu_xcl, &m->ris->props))
+			*flt_val |= FIELD_PREP(MSMON_CFG_CSU_FLT_XCL, ctx->csu_exclude_clean);
+
+		break;
+	case mpam_feat_msmon_mbwu:
+		*ctl_val |= MSMON_CFG_MBWU_CTL_TYPE_MBWU;
+
+		if (mpam_has_feature(mpam_feat_msmon_mbwu_rwbw, &m->ris->props))
+			*flt_val |= FIELD_PREP(MSMON_CFG_MBWU_FLT_RWBW, ctx->opts);
+
+		break;
+	default:
+		pr_warn("Unexpected monitor type %d\n", m->type);
+	}
+}
+
+static void read_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
+				    u32 *flt_val)
+{
+	struct mpam_msc *msc = m->ris->vmsc->msc;
+
+	switch (m->type) {
+	case mpam_feat_msmon_csu:
+		*ctl_val = mpam_read_monsel_reg(msc, CFG_CSU_CTL);
+		*flt_val = mpam_read_monsel_reg(msc, CFG_CSU_FLT);
+		break;
+	case mpam_feat_msmon_mbwu:
+		*ctl_val = mpam_read_monsel_reg(msc, CFG_MBWU_CTL);
+		*flt_val = mpam_read_monsel_reg(msc, CFG_MBWU_FLT);
+		break;
+	default:
+		pr_warn("Unexpected monitor type %d\n", m->type);
+	}
+}
+
+/* Remove values set by the hardware to prevent apparent mismatches. */
+static inline void clean_msmon_ctl_val(u32 *cur_ctl)
+{
+	*cur_ctl &= ~MSMON_CFG_x_CTL_OFLOW_STATUS;
+}
+
+static void write_msmon_ctl_flt_vals(struct mon_read *m, u32 ctl_val,
+				     u32 flt_val)
+{
+	struct mpam_msc *msc = m->ris->vmsc->msc;
+
+	/*
+	 * Write the ctl_val with the enable bit cleared, reset the counter,
+	 * then enable counter.
+	 */
+	switch (m->type) {
+	case mpam_feat_msmon_csu:
+		mpam_write_monsel_reg(msc, CFG_CSU_FLT, flt_val);
+		mpam_write_monsel_reg(msc, CFG_CSU_CTL, ctl_val);
+		mpam_write_monsel_reg(msc, CSU, 0);
+		mpam_write_monsel_reg(msc, CFG_CSU_CTL, ctl_val | MSMON_CFG_x_CTL_EN);
+		break;
+	case mpam_feat_msmon_mbwu:
+		mpam_write_monsel_reg(msc, CFG_MBWU_FLT, flt_val);
+		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, ctl_val);
+		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, ctl_val | MSMON_CFG_x_CTL_EN);
+		/* Counting monitors require NRDY to be reset by software */
+		mpam_write_monsel_reg(msc, MBWU, 0);
+		break;
+	default:
+		pr_warn("Unexpected monitor type %d\n", m->type);
+	}
+}
+
+static void __ris_msmon_read(void *arg)
+{
+	u64 now;
+	bool nrdy = false;
+	bool config_mismatch;
+	struct mon_read *m = arg;
+	struct mon_cfg *ctx = m->ctx;
+	struct mpam_msc_ris *ris = m->ris;
+	struct mpam_props *rprops = &ris->props;
+	struct mpam_msc *msc = m->ris->vmsc->msc;
+	u32 mon_sel, ctl_val, flt_val, cur_ctl, cur_flt;
+
+	if (!mpam_mon_sel_lock(msc)) {
+		m->err = -EIO;
+		return;
+	}
+	mon_sel = FIELD_PREP(MSMON_CFG_MON_SEL_MON_SEL, ctx->mon) |
+		  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
+	mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
+
+	/*
+	 * Read the existing configuration to avoid re-writing the same values.
+	 * This saves waiting for 'nrdy' on subsequent reads.
+	 */
+	read_msmon_ctl_flt_vals(m, &cur_ctl, &cur_flt);
+	clean_msmon_ctl_val(&cur_ctl);
+	gen_msmon_ctl_flt_vals(m, &ctl_val, &flt_val);
+	config_mismatch = cur_flt != flt_val ||
+			  cur_ctl != (ctl_val | MSMON_CFG_x_CTL_EN);
+
+	if (config_mismatch)
+		write_msmon_ctl_flt_vals(m, ctl_val, flt_val);
+
+	switch (m->type) {
+	case mpam_feat_msmon_csu:
+		now = mpam_read_monsel_reg(msc, CSU);
+		if (mpam_has_feature(mpam_feat_msmon_csu_hw_nrdy, rprops))
+			nrdy = now & MSMON___NRDY;
+		break;
+	case mpam_feat_msmon_mbwu:
+		now = mpam_read_monsel_reg(msc, MBWU);
+		if (mpam_has_feature(mpam_feat_msmon_mbwu_hw_nrdy, rprops))
+			nrdy = now & MSMON___NRDY;
+		break;
+	default:
+		m->err = -EINVAL;
+	}
+	mpam_mon_sel_unlock(msc);
+
+	if (nrdy) {
+		m->err = -EBUSY;
+		return;
+	}
+
+	now = FIELD_GET(MSMON___VALUE, now);
+	*m->val += now;
+}
+
+static int _msmon_read(struct mpam_component *comp, struct mon_read *arg)
+{
+	int err, any_err = 0;
+	struct mpam_vmsc *vmsc;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(vmsc, &comp->vmsc, comp_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		struct mpam_msc *msc = vmsc->msc;
+		struct mpam_msc_ris *ris;
+
+		list_for_each_entry_srcu(ris, &vmsc->ris, vmsc_list,
+					 srcu_read_lock_held(&mpam_srcu)) {
+			arg->ris = ris;
+
+			err = smp_call_function_any(&msc->accessibility,
+						    __ris_msmon_read, arg,
+						    true);
+			if (!err && arg->err)
+				err = arg->err;
+
+			/*
+			 * Save one error to be returned to the caller, but
+			 * keep reading counters so that get reprogrammed. On
+			 * platforms with NRDY this lets us wait once.
+			 */
+			if (err)
+				any_err = err;
+		}
+	}
+
+	return any_err;
+}
+
+int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
+		    enum mpam_device_features type, u64 *val)
+{
+	int err;
+	struct mon_read arg;
+	u64 wait_jiffies = 0;
+	struct mpam_props *cprops = &comp->class->props;
+
+	might_sleep();
+
+	if (!mpam_is_enabled())
+		return -EIO;
+
+	if (!mpam_has_feature(type, cprops))
+		return -EOPNOTSUPP;
+
+	arg = (struct mon_read) {
+		.ctx = ctx,
+		.type = type,
+		.val = val,
+	};
+	*val = 0;
+
+	err = _msmon_read(comp, &arg);
+	if (err == -EBUSY && comp->class->nrdy_usec)
+		wait_jiffies = usecs_to_jiffies(comp->class->nrdy_usec);
+
+	while (wait_jiffies)
+		wait_jiffies = schedule_timeout_uninterruptible(wait_jiffies);
+
+	if (err == -EBUSY) {
+		arg = (struct mon_read) {
+			.ctx = ctx,
+			.type = type,
+			.val = val,
+		};
+		*val = 0;
+
+		err = _msmon_read(comp, &arg);
+	}
+
+	return err;
+}
+
 static void mpam_reset_msc_bitmap(struct mpam_msc *msc, u16 reg, u16 wd)
 {
 	u32 num_words, msb;
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index e59c0f4d9ada..d8f8e29987e0 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -184,6 +184,22 @@ struct mpam_props {
 #define mpam_set_feature(_feat, x)	set_bit(_feat, (x)->features)
 #define mpam_clear_feature(_feat, x)	clear_bit(_feat, (x)->features)
 
+/* The values for MSMON_CFG_MBWU_FLT.RWBW */
+enum mon_filter_options {
+	COUNT_BOTH	= 0,
+	COUNT_WRITE	= 1,
+	COUNT_READ	= 2,
+};
+
+struct mon_cfg {
+	u16			mon;
+	u8			pmg;
+	bool			match_pmg;
+	bool			csu_exclude_clean;
+	u32			partid;
+	enum mon_filter_options opts;
+};
+
 struct mpam_class {
 	/* mpam_components in this class */
 	struct list_head	components;
@@ -327,6 +343,9 @@ void mpam_disable(struct work_struct *work);
 int mpam_apply_config(struct mpam_component *comp, u16 partid,
 		      struct mpam_config *cfg);
 
+int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
+		    enum mpam_device_features, u64 *val);
+
 int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
 				   cpumask_t *affinity);
 
-- 
2.43.0

[PATCH v5 27/34] arm_mpam: Track bandwidth counter state for power management

[Ben Horgan]

From: James Morse <james.morse@arm.com>

Bandwidth counters need to run continuously to correctly reflect the
bandwidth.

Save the counter state when the hardware is reset due to CPU hotplug.
Add struct mbwu_state to track the bandwidth counter. Support for
tracking overflow with the same structure will be added in a
subsequent commit.

Cc: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Drop tags
Fix correction accounting
Split out overflow checking
---
 drivers/resctrl/mpam_devices.c  | 126 +++++++++++++++++++++++++++++++-
 drivers/resctrl/mpam_internal.h |  21 +++++-
 2 files changed, 145 insertions(+), 2 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index b229e820673c..7983d492ad9a 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -993,6 +993,7 @@ static void __ris_msmon_read(void *arg)
 	struct mon_read *m = arg;
 	struct mon_cfg *ctx = m->ctx;
 	struct mpam_msc_ris *ris = m->ris;
+	struct msmon_mbwu_state *mbwu_state;
 	struct mpam_props *rprops = &ris->props;
 	struct mpam_msc *msc = m->ris->vmsc->msc;
 	u32 mon_sel, ctl_val, flt_val, cur_ctl, cur_flt;
@@ -1023,11 +1024,21 @@ static void __ris_msmon_read(void *arg)
 		now = mpam_read_monsel_reg(msc, CSU);
 		if (mpam_has_feature(mpam_feat_msmon_csu_hw_nrdy, rprops))
 			nrdy = now & MSMON___NRDY;
+		now = FIELD_GET(MSMON___VALUE, now);
 		break;
 	case mpam_feat_msmon_mbwu:
 		now = mpam_read_monsel_reg(msc, MBWU);
 		if (mpam_has_feature(mpam_feat_msmon_mbwu_hw_nrdy, rprops))
 			nrdy = now & MSMON___NRDY;
+		now = FIELD_GET(MSMON___VALUE, now);
+
+		if (nrdy)
+			break;
+
+		mbwu_state = &ris->mbwu_state[ctx->mon];
+
+		/* Include bandwidth consumed before the last hardware reset */
+		now += mbwu_state->correction;
 		break;
 	default:
 		m->err = -EINVAL;
@@ -1039,7 +1050,6 @@ static void __ris_msmon_read(void *arg)
 		return;
 	}
 
-	now = FIELD_GET(MSMON___VALUE, now);
 	*m->val += now;
 }
 
@@ -1235,6 +1245,67 @@ static void mpam_reprogram_ris_partid(struct mpam_msc_ris *ris, u16 partid,
 	mutex_unlock(&msc->part_sel_lock);
 }
 
+/* Call with msc cfg_lock held */
+static int mpam_restore_mbwu_state(void *_ris)
+{
+	int i;
+	struct mon_read mwbu_arg;
+	struct mpam_msc_ris *ris = _ris;
+
+	for (i = 0; i < ris->props.num_mbwu_mon; i++) {
+		if (ris->mbwu_state[i].enabled) {
+			mwbu_arg.ris = ris;
+			mwbu_arg.ctx = &ris->mbwu_state[i].cfg;
+			mwbu_arg.type = mpam_feat_msmon_mbwu;
+
+			__ris_msmon_read(&mwbu_arg);
+		}
+	}
+
+	return 0;
+}
+
+/* Call with MSC cfg_lock held */
+static int mpam_save_mbwu_state(void *arg)
+{
+	int i;
+	u64 val;
+	struct mon_cfg *cfg;
+	u32 cur_flt, cur_ctl, mon_sel;
+	struct mpam_msc_ris *ris = arg;
+	struct msmon_mbwu_state *mbwu_state;
+	struct mpam_msc *msc = ris->vmsc->msc;
+
+	for (i = 0; i < ris->props.num_mbwu_mon; i++) {
+		mbwu_state = &ris->mbwu_state[i];
+		cfg = &mbwu_state->cfg;
+
+		if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
+			return -EIO;
+
+		mon_sel = FIELD_PREP(MSMON_CFG_MON_SEL_MON_SEL, i) |
+			  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
+		mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
+
+		cur_flt = mpam_read_monsel_reg(msc, CFG_MBWU_FLT);
+		cur_ctl = mpam_read_monsel_reg(msc, CFG_MBWU_CTL);
+		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, 0);
+
+		val = mpam_read_monsel_reg(msc, MBWU);
+		mpam_write_monsel_reg(msc, MBWU, 0);
+
+		cfg->mon = i;
+		cfg->pmg = FIELD_GET(MSMON_CFG_x_FLT_PMG, cur_flt);
+		cfg->match_pmg = FIELD_GET(MSMON_CFG_x_CTL_MATCH_PMG, cur_ctl);
+		cfg->partid = FIELD_GET(MSMON_CFG_x_FLT_PARTID, cur_flt);
+		mbwu_state->correction += val;
+		mbwu_state->enabled = FIELD_GET(MSMON_CFG_x_CTL_EN, cur_ctl);
+		mpam_mon_sel_unlock(msc);
+	}
+
+	return 0;
+}
+
 static void mpam_init_reset_cfg(struct mpam_config *reset_cfg)
 {
 	*reset_cfg = (struct mpam_config) {
@@ -1343,6 +1414,9 @@ static void mpam_reprogram_msc(struct mpam_msc *msc)
 			mpam_touch_msc(msc, __write_config, &arg);
 		}
 		ris->in_reset_state = reset;
+
+		if (mpam_has_feature(mpam_feat_msmon_mbwu, &ris->props))
+			mpam_touch_msc(msc, &mpam_restore_mbwu_state, ris);
 	}
 	mutex_unlock(&msc->cfg_lock);
 }
@@ -1436,6 +1510,9 @@ static int mpam_cpu_offline(unsigned int cpu)
 				 * lost while the CPUs are offline.
 				 */
 				ris->in_reset_state = false;
+
+				if (mpam_is_enabled())
+					mpam_touch_msc(msc, &mpam_save_mbwu_state, ris);
 			}
 			mutex_unlock(&msc->cfg_lock);
 		}
@@ -2109,7 +2186,22 @@ static void mpam_unregister_irqs(void)
 
 static void __destroy_component_cfg(struct mpam_component *comp)
 {
+	struct mpam_msc *msc;
+	struct mpam_vmsc *vmsc;
+	struct mpam_msc_ris *ris;
+
+	lockdep_assert_held(&mpam_list_lock);
+
 	add_to_garbage(comp->cfg);
+	list_for_each_entry(vmsc, &comp->vmsc, comp_list) {
+		msc = vmsc->msc;
+
+		if (mpam_mon_sel_lock(msc)) {
+			list_for_each_entry(ris, &vmsc->ris, vmsc_list)
+				add_to_garbage(ris->mbwu_state);
+			mpam_mon_sel_unlock(msc);
+		}
+	}
 }
 
 static void mpam_reset_component_cfg(struct mpam_component *comp)
@@ -2135,6 +2227,8 @@ static void mpam_reset_component_cfg(struct mpam_component *comp)
 
 static int __allocate_component_cfg(struct mpam_component *comp)
 {
+	struct mpam_vmsc *vmsc;
+
 	mpam_assert_partid_sizes_fixed();
 
 	if (comp->cfg)
@@ -2152,6 +2246,36 @@ static int __allocate_component_cfg(struct mpam_component *comp)
 
 	mpam_reset_component_cfg(comp);
 
+	list_for_each_entry(vmsc, &comp->vmsc, comp_list) {
+		struct mpam_msc *msc;
+		struct mpam_msc_ris *ris;
+		struct msmon_mbwu_state *mbwu_state;
+
+		if (!vmsc->props.num_mbwu_mon)
+			continue;
+
+		msc = vmsc->msc;
+		list_for_each_entry(ris, &vmsc->ris, vmsc_list) {
+			if (!ris->props.num_mbwu_mon)
+				continue;
+
+			mbwu_state = kcalloc(ris->props.num_mbwu_mon,
+					     sizeof(*ris->mbwu_state),
+					     GFP_KERNEL);
+			if (!mbwu_state) {
+				__destroy_component_cfg(comp);
+				return -ENOMEM;
+			}
+
+			init_garbage(&mbwu_state[0].garbage);
+
+			if (mpam_mon_sel_lock(msc)) {
+				ris->mbwu_state = mbwu_state;
+				mpam_mon_sel_unlock(msc);
+			}
+		}
+	}
+
 	return 0;
 }
 
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index d8f8e29987e0..9c140d8b1e0d 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -91,7 +91,10 @@ struct mpam_msc {
 	 */
 	struct mutex		part_sel_lock;
 
-	/* cfg_lock protects the msc configuration. */
+	/*
+	 * cfg_lock protects the msc configuration and guards against mbwu_state
+	 * save and restore racing.
+	 */
 	struct mutex		cfg_lock;
 
 	/*
@@ -200,6 +203,19 @@ struct mon_cfg {
 	enum mon_filter_options opts;
 };
 
+/* Changes to msmon_mbwu_state are protected by the msc's mon_sel_lock. */
+struct msmon_mbwu_state {
+	bool		enabled;
+	struct mon_cfg	cfg;
+
+	/*
+	 * The value to add to the new reading to account for power management.
+	 */
+	u64		correction;
+
+	struct mpam_garbage	garbage;
+};
+
 struct mpam_class {
 	/* mpam_components in this class */
 	struct list_head	components;
@@ -293,6 +309,9 @@ struct mpam_msc_ris {
 	/* parent: */
 	struct mpam_vmsc	*vmsc;
 
+	/* msmon mbwu configuration is preserved over reset */
+	struct msmon_mbwu_state	*mbwu_state;
+
 	struct mpam_garbage	garbage;
 };
 
-- 
2.43.0

[PATCH v5 28/34] arm_mpam: Consider overflow in bandwidth counter state

[Ben Horgan]

Use the overflow status bit to track overflow on each bandwidth counter
read and add the counter size to the correction when overflow is detected.

This assumes that only a single overflow has occurred since the last read
of the counter. Overflow interrupts, on hardware that supports them could
be used to remove this limitation.

Cc: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_devices.c  | 24 ++++++++++++++++++++++--
 drivers/resctrl/mpam_internal.h |  3 ++-
 2 files changed, 24 insertions(+), 3 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 7983d492ad9a..1adc55d258ab 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -985,11 +985,18 @@ static void write_msmon_ctl_flt_vals(struct mon_read *m, u32 ctl_val,
 	}
 }
 
+static u64 mpam_msmon_overflow_val(enum mpam_device_features type)
+{
+	/* TODO: scaling, and long counters */
+	return BIT_ULL(hweight_long(MSMON___VALUE));
+}
+
 static void __ris_msmon_read(void *arg)
 {
 	u64 now;
 	bool nrdy = false;
 	bool config_mismatch;
+	bool overflow;
 	struct mon_read *m = arg;
 	struct mon_cfg *ctx = m->ctx;
 	struct mpam_msc_ris *ris = m->ris;
@@ -1011,13 +1018,20 @@ static void __ris_msmon_read(void *arg)
 	 * This saves waiting for 'nrdy' on subsequent reads.
 	 */
 	read_msmon_ctl_flt_vals(m, &cur_ctl, &cur_flt);
+	overflow = cur_ctl & MSMON_CFG_x_CTL_OFLOW_STATUS;
+
 	clean_msmon_ctl_val(&cur_ctl);
 	gen_msmon_ctl_flt_vals(m, &ctl_val, &flt_val);
 	config_mismatch = cur_flt != flt_val ||
 			  cur_ctl != (ctl_val | MSMON_CFG_x_CTL_EN);
 
-	if (config_mismatch)
+	if (config_mismatch) {
 		write_msmon_ctl_flt_vals(m, ctl_val, flt_val);
+		overflow = false;
+	} else if (overflow) {
+		mpam_write_monsel_reg(msc, CFG_MBWU_CTL,
+				      cur_ctl & ~MSMON_CFG_x_CTL_OFLOW_STATUS);
+	}
 
 	switch (m->type) {
 	case mpam_feat_msmon_csu:
@@ -1037,7 +1051,13 @@ static void __ris_msmon_read(void *arg)
 
 		mbwu_state = &ris->mbwu_state[ctx->mon];
 
-		/* Include bandwidth consumed before the last hardware reset */
+		if (overflow)
+			mbwu_state->correction += mpam_msmon_overflow_val(m->type);
+
+		/*
+		 * Include bandwidth consumed before the last hardware reset and
+		 * a counter size increment for each overflow.
+		 */
 		now += mbwu_state->correction;
 		break;
 	default:
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 9c140d8b1e0d..41f30b1a0d97 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -209,7 +209,8 @@ struct msmon_mbwu_state {
 	struct mon_cfg	cfg;
 
 	/*
-	 * The value to add to the new reading to account for power management.
+	 * The value to add to the new reading to account for power management,
+	 * and overflow.
 	 */
 	u64		correction;
 
-- 
2.43.0

[PATCH v5 29/34] arm_mpam: Probe for long/lwd mbwu counters

[Ben Horgan]

From: Rohit Mathew <rohit.mathew@arm.com>

mpam v0.1 and versions above v1.0 support optional long counter for
memory bandwidth monitoring. The MPAMF_MBWUMON_IDR register has fields
indicating support for long counters.

Probe these feature bits.

The mpam_feat_msmon_mbwu feature is used to indicate that bandwidth
monitors are supported, instead of muddling this with which size of
bandwidth monitors, add an explicit 31 bit counter feature.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
[ morse: Added 31bit counter feature to simplify later logic ]
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Only set the exact counter length that is supported
---
 drivers/resctrl/mpam_devices.c  | 35 ++++++++++++++++++++++-----------
 drivers/resctrl/mpam_internal.h |  3 +++
 2 files changed, 26 insertions(+), 12 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index 1adc55d258ab..c371a22147b7 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -783,25 +783,36 @@ static void mpam_ris_hw_probe(struct mpam_msc_ris *ris)
 				dev_err_once(dev, "Counters are not usable because not-ready timeout was not provided by firmware.");
 		}
 		if (FIELD_GET(MPAMF_MSMON_IDR_MSMON_MBWU, msmon_features)) {
-			bool hw_managed;
+			bool has_long, hw_managed;
 			u32 mbwumon_idr = mpam_read_partsel_reg(msc, MBWUMON_IDR);
 
 			props->num_mbwu_mon = FIELD_GET(MPAMF_MBWUMON_IDR_NUM_MON, mbwumon_idr);
-			if (props->num_mbwu_mon)
+			if (props->num_mbwu_mon) {
 				mpam_set_feature(mpam_feat_msmon_mbwu, props);
 
-			if (FIELD_GET(MPAMF_MBWUMON_IDR_HAS_RWBW, mbwumon_idr))
-				mpam_set_feature(mpam_feat_msmon_mbwu_rwbw, props);
+				if (FIELD_GET(MPAMF_MBWUMON_IDR_HAS_RWBW, mbwumon_idr))
+					mpam_set_feature(mpam_feat_msmon_mbwu_rwbw, props);
 
-			/* Is NRDY hardware managed? */
-			hw_managed = mpam_ris_hw_probe_hw_nrdy(ris, MBWU);
-			if (hw_managed)
-				mpam_set_feature(mpam_feat_msmon_mbwu_hw_nrdy, props);
+				has_long = FIELD_GET(MPAMF_MBWUMON_IDR_HAS_LONG, mbwumon_idr);
+				if (has_long) {
+					if (FIELD_GET(MPAMF_MBWUMON_IDR_LWD, mbwumon_idr))
+						mpam_set_feature(mpam_feat_msmon_mbwu_63counter, props);
+					else
+						mpam_set_feature(mpam_feat_msmon_mbwu_44counter, props);
+				} else {
+					mpam_set_feature(mpam_feat_msmon_mbwu_31counter, props);
+				}
 
-			/*
-			 * Don't warn about any missing firmware property for
-			 * MBWU NRDY - it doesn't make any sense!
-			 */
+				/* Is NRDY hardware managed? */
+				hw_managed = mpam_ris_hw_probe_hw_nrdy(ris, MBWU);
+				if (hw_managed)
+					mpam_set_feature(mpam_feat_msmon_mbwu_hw_nrdy, props);
+
+				/*
+				 * Don't warn about any missing firmware property for
+				 * MBWU NRDY - it doesn't make any sense!
+				 */
+			}
 		}
 	}
 
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 41f30b1a0d97..d3eb92b79b98 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -162,6 +162,9 @@ enum mpam_device_features {
 	mpam_feat_msmon_csu_xcl,
 	mpam_feat_msmon_csu_hw_nrdy,
 	mpam_feat_msmon_mbwu,
+	mpam_feat_msmon_mbwu_31counter,
+	mpam_feat_msmon_mbwu_44counter,
+	mpam_feat_msmon_mbwu_63counter,
 	mpam_feat_msmon_mbwu_capture,
 	mpam_feat_msmon_mbwu_rwbw,
 	mpam_feat_msmon_mbwu_hw_nrdy,
-- 
2.43.0

[PATCH v5 30/34] arm_mpam: Use long MBWU counters if supported

[Ben Horgan]

From: Rohit Mathew <rohit.mathew@arm.com>

Now that the larger counter sizes are probed, make use of them.

Callers of mpam_msmon_read() may not know (or care!) about the different
counter sizes. Allow them to specify mpam_feat_msmon_mbwu and have the
driver pick the counter to use.

Only 32bit accesses to the MSC are required to be supported by the
spec, but these registers are 64bits. The lower half may overflow
into the higher half between two 32bit reads. To avoid this, use
a helper that reads the top half multiple times to check for overflow.

Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
[morse: merged multiple patches from Rohit, added explicit counter selection ]
Signed-off-by: James Morse <james.morse@arm.com>
Cc: Peter Newman <peternewman@google.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Peter:
Fix type checking, use mpam_feat_msmon_mbwu_<n>counter
Reset/configuration order of long counters
---
 drivers/resctrl/mpam_devices.c | 145 ++++++++++++++++++++++++++++-----
 1 file changed, 126 insertions(+), 19 deletions(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index c371a22147b7..af0cd44c7517 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -905,6 +905,50 @@ struct mon_read {
 	int				err;
 };
 
+static bool mpam_ris_has_mbwu_long_counter(struct mpam_msc_ris *ris)
+{
+	return (mpam_has_feature(mpam_feat_msmon_mbwu_63counter, &ris->props) ||
+		mpam_has_feature(mpam_feat_msmon_mbwu_44counter, &ris->props));
+}
+
+static u64 mpam_msc_read_mbwu_l(struct mpam_msc *msc)
+{
+	int retry = 3;
+	u32 mbwu_l_low;
+	u64 mbwu_l_high1, mbwu_l_high2;
+
+	mpam_mon_sel_lock_held(msc);
+
+	WARN_ON_ONCE((MSMON_MBWU_L + sizeof(u64)) > msc->mapped_hwpage_sz);
+	WARN_ON_ONCE(!cpumask_test_cpu(smp_processor_id(), &msc->accessibility));
+
+	mbwu_l_high2 = __mpam_read_reg(msc, MSMON_MBWU_L + 4);
+	do {
+		mbwu_l_high1 = mbwu_l_high2;
+		mbwu_l_low = __mpam_read_reg(msc, MSMON_MBWU_L);
+		mbwu_l_high2 = __mpam_read_reg(msc, MSMON_MBWU_L + 4);
+
+		retry--;
+	} while (mbwu_l_high1 != mbwu_l_high2 && retry > 0);
+
+	if (mbwu_l_high1 == mbwu_l_high2)
+		return (mbwu_l_high1 << 32) | mbwu_l_low;
+
+	pr_warn("Failed to read a stable value\n");
+	return MSMON___L_NRDY;
+}
+
+static void mpam_msc_zero_mbwu_l(struct mpam_msc *msc)
+{
+	mpam_mon_sel_lock_held(msc);
+
+	WARN_ON_ONCE((MSMON_MBWU_L + sizeof(u64)) > msc->mapped_hwpage_sz);
+	WARN_ON_ONCE(!cpumask_test_cpu(smp_processor_id(), &msc->accessibility));
+
+	__mpam_write_reg(msc, MSMON_MBWU_L, 0);
+	__mpam_write_reg(msc, MSMON_MBWU_L + 4, 0);
+}
+
 static void gen_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
 				   u32 *flt_val)
 {
@@ -931,7 +975,9 @@ static void gen_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
 			*flt_val |= FIELD_PREP(MSMON_CFG_CSU_FLT_XCL, ctx->csu_exclude_clean);
 
 		break;
-	case mpam_feat_msmon_mbwu:
+	case mpam_feat_msmon_mbwu_31counter:
+	case mpam_feat_msmon_mbwu_44counter:
+	case mpam_feat_msmon_mbwu_63counter:
 		*ctl_val |= MSMON_CFG_MBWU_CTL_TYPE_MBWU;
 
 		if (mpam_has_feature(mpam_feat_msmon_mbwu_rwbw, &m->ris->props))
@@ -953,7 +999,9 @@ static void read_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
 		*ctl_val = mpam_read_monsel_reg(msc, CFG_CSU_CTL);
 		*flt_val = mpam_read_monsel_reg(msc, CFG_CSU_FLT);
 		break;
-	case mpam_feat_msmon_mbwu:
+	case mpam_feat_msmon_mbwu_31counter:
+	case mpam_feat_msmon_mbwu_44counter:
+	case mpam_feat_msmon_mbwu_63counter:
 		*ctl_val = mpam_read_monsel_reg(msc, CFG_MBWU_CTL);
 		*flt_val = mpam_read_monsel_reg(msc, CFG_MBWU_FLT);
 		break;
@@ -966,6 +1014,9 @@ static void read_msmon_ctl_flt_vals(struct mon_read *m, u32 *ctl_val,
 static inline void clean_msmon_ctl_val(u32 *cur_ctl)
 {
 	*cur_ctl &= ~MSMON_CFG_x_CTL_OFLOW_STATUS;
+
+	if (FIELD_GET(MSMON_CFG_x_CTL_TYPE, *cur_ctl) == MSMON_CFG_MBWU_CTL_TYPE_MBWU)
+		*cur_ctl &= ~MSMON_CFG_MBWU_CTL_OFLOW_STATUS_L;
 }
 
 static void write_msmon_ctl_flt_vals(struct mon_read *m, u32 ctl_val,
@@ -984,12 +1035,17 @@ static void write_msmon_ctl_flt_vals(struct mon_read *m, u32 ctl_val,
 		mpam_write_monsel_reg(msc, CSU, 0);
 		mpam_write_monsel_reg(msc, CFG_CSU_CTL, ctl_val | MSMON_CFG_x_CTL_EN);
 		break;
-	case mpam_feat_msmon_mbwu:
+	case mpam_feat_msmon_mbwu_31counter:
+	case mpam_feat_msmon_mbwu_44counter:
+	case mpam_feat_msmon_mbwu_63counter:
 		mpam_write_monsel_reg(msc, CFG_MBWU_FLT, flt_val);
 		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, ctl_val);
 		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, ctl_val | MSMON_CFG_x_CTL_EN);
 		/* Counting monitors require NRDY to be reset by software */
-		mpam_write_monsel_reg(msc, MBWU, 0);
+		if (m->type == mpam_feat_msmon_mbwu_31counter)
+			mpam_write_monsel_reg(msc, MBWU, 0);
+		else
+			mpam_msc_zero_mbwu_l(m->ris->vmsc->msc);
 		break;
 	default:
 		pr_warn("Unexpected monitor type %d\n", m->type);
@@ -998,8 +1054,17 @@ static void write_msmon_ctl_flt_vals(struct mon_read *m, u32 ctl_val,
 
 static u64 mpam_msmon_overflow_val(enum mpam_device_features type)
 {
-	/* TODO: scaling, and long counters */
-	return BIT_ULL(hweight_long(MSMON___VALUE));
+	/* TODO: implement scaling counters */
+	switch (type) {
+	case mpam_feat_msmon_mbwu_63counter:
+		return BIT_ULL(hweight_long(MSMON___LWD_VALUE));
+	case mpam_feat_msmon_mbwu_44counter:
+		return BIT_ULL(hweight_long(MSMON___L_VALUE));
+	case mpam_feat_msmon_mbwu_31counter:
+		return BIT_ULL(hweight_long(MSMON___VALUE));
+	default:
+		return 0;
+	}
 }
 
 static void __ris_msmon_read(void *arg)
@@ -1029,7 +1094,12 @@ static void __ris_msmon_read(void *arg)
 	 * This saves waiting for 'nrdy' on subsequent reads.
 	 */
 	read_msmon_ctl_flt_vals(m, &cur_ctl, &cur_flt);
-	overflow = cur_ctl & MSMON_CFG_x_CTL_OFLOW_STATUS;
+
+	if (mpam_feat_msmon_mbwu_31counter == m->type)
+		overflow = cur_ctl & MSMON_CFG_x_CTL_OFLOW_STATUS;
+	else if (mpam_feat_msmon_mbwu_44counter == m->type ||
+		 mpam_feat_msmon_mbwu_63counter == m->type)
+		overflow = cur_ctl & MSMON_CFG_MBWU_CTL_OFLOW_STATUS_L;
 
 	clean_msmon_ctl_val(&cur_ctl);
 	gen_msmon_ctl_flt_vals(m, &ctl_val, &flt_val);
@@ -1041,7 +1111,9 @@ static void __ris_msmon_read(void *arg)
 		overflow = false;
 	} else if (overflow) {
 		mpam_write_monsel_reg(msc, CFG_MBWU_CTL,
-				      cur_ctl & ~MSMON_CFG_x_CTL_OFLOW_STATUS);
+				      cur_ctl &
+				      ~(MSMON_CFG_x_CTL_OFLOW_STATUS |
+					MSMON_CFG_MBWU_CTL_OFLOW_STATUS_L));
 	}
 
 	switch (m->type) {
@@ -1051,11 +1123,24 @@ static void __ris_msmon_read(void *arg)
 			nrdy = now & MSMON___NRDY;
 		now = FIELD_GET(MSMON___VALUE, now);
 		break;
-	case mpam_feat_msmon_mbwu:
-		now = mpam_read_monsel_reg(msc, MBWU);
-		if (mpam_has_feature(mpam_feat_msmon_mbwu_hw_nrdy, rprops))
-			nrdy = now & MSMON___NRDY;
-		now = FIELD_GET(MSMON___VALUE, now);
+	case mpam_feat_msmon_mbwu_31counter:
+	case mpam_feat_msmon_mbwu_44counter:
+	case mpam_feat_msmon_mbwu_63counter:
+		if (m->type != mpam_feat_msmon_mbwu_31counter) {
+			now = mpam_msc_read_mbwu_l(msc);
+			if (mpam_has_feature(mpam_feat_msmon_mbwu_hw_nrdy, rprops))
+				nrdy = now & MSMON___L_NRDY;
+
+			if (m->type == mpam_feat_msmon_mbwu_63counter)
+				now = FIELD_GET(MSMON___LWD_VALUE, now);
+			else
+				now = FIELD_GET(MSMON___L_VALUE, now);
+		} else {
+			now = mpam_read_monsel_reg(msc, MBWU);
+			if (mpam_has_feature(mpam_feat_msmon_mbwu_hw_nrdy, rprops))
+				nrdy = now & MSMON___NRDY;
+			now = FIELD_GET(MSMON___VALUE, now);
+		}
 
 		if (nrdy)
 			break;
@@ -1118,13 +1203,26 @@ static int _msmon_read(struct mpam_component *comp, struct mon_read *arg)
 	return any_err;
 }
 
+static enum mpam_device_features mpam_msmon_choose_counter(struct mpam_class *class)
+{
+	struct mpam_props *cprops = &class->props;
+
+	if (mpam_has_feature(mpam_feat_msmon_mbwu_63counter, cprops))
+		return mpam_feat_msmon_mbwu_63counter;
+	if (mpam_has_feature(mpam_feat_msmon_mbwu_44counter, cprops))
+		return mpam_feat_msmon_mbwu_44counter;
+
+	return mpam_feat_msmon_mbwu_31counter;
+}
+
 int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
 		    enum mpam_device_features type, u64 *val)
 {
 	int err;
 	struct mon_read arg;
 	u64 wait_jiffies = 0;
-	struct mpam_props *cprops = &comp->class->props;
+	struct mpam_class *class = comp->class;
+	struct mpam_props *cprops = &class->props;
 
 	might_sleep();
 
@@ -1134,6 +1232,9 @@ int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
 	if (!mpam_has_feature(type, cprops))
 		return -EOPNOTSUPP;
 
+	if (type == mpam_feat_msmon_mbwu)
+		type = mpam_msmon_choose_counter(class);
+
 	arg = (struct mon_read) {
 		.ctx = ctx,
 		.type = type,
@@ -1142,8 +1243,8 @@ int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
 	*val = 0;
 
 	err = _msmon_read(comp, &arg);
-	if (err == -EBUSY && comp->class->nrdy_usec)
-		wait_jiffies = usecs_to_jiffies(comp->class->nrdy_usec);
+	if (err == -EBUSY && class->nrdy_usec)
+		wait_jiffies = usecs_to_jiffies(class->nrdy_usec);
 
 	while (wait_jiffies)
 		wait_jiffies = schedule_timeout_uninterruptible(wait_jiffies);
@@ -1282,12 +1383,13 @@ static int mpam_restore_mbwu_state(void *_ris)
 	int i;
 	struct mon_read mwbu_arg;
 	struct mpam_msc_ris *ris = _ris;
+	struct mpam_class *class = ris->vmsc->comp->class;
 
 	for (i = 0; i < ris->props.num_mbwu_mon; i++) {
 		if (ris->mbwu_state[i].enabled) {
 			mwbu_arg.ris = ris;
 			mwbu_arg.ctx = &ris->mbwu_state[i].cfg;
-			mwbu_arg.type = mpam_feat_msmon_mbwu;
+			mwbu_arg.type = mpam_msmon_choose_counter(class);
 
 			__ris_msmon_read(&mwbu_arg);
 		}
@@ -1322,8 +1424,13 @@ static int mpam_save_mbwu_state(void *arg)
 		cur_ctl = mpam_read_monsel_reg(msc, CFG_MBWU_CTL);
 		mpam_write_monsel_reg(msc, CFG_MBWU_CTL, 0);
 
-		val = mpam_read_monsel_reg(msc, MBWU);
-		mpam_write_monsel_reg(msc, MBWU, 0);
+		if (mpam_ris_has_mbwu_long_counter(ris)) {
+			val = mpam_msc_read_mbwu_l(msc);
+			mpam_msc_zero_mbwu_l(msc);
+		} else {
+			val = mpam_read_monsel_reg(msc, MBWU);
+			mpam_write_monsel_reg(msc, MBWU, 0);
+		}
 
 		cfg->mon = i;
 		cfg->pmg = FIELD_GET(MSMON_CFG_x_FLT_PMG, cur_flt);
-- 
2.43.0

[PATCH v5 31/34] arm_mpam: Add helper to reset saved mbwu state

[Ben Horgan]

From: James Morse <james.morse@arm.com>

resctrl expects to reset the bandwidth counters when the filesystem
is mounted.

To allow this, add a helper that clears the saved mbwu state. Instead
of cross calling to each CPU that can access the component MSC to
write to the counter, set a flag that causes it to be zero'd on the
the next read. This is easily done by forcing a configuration update.

Signed-off-by: James Morse <james.morse@arm.com>
Cc: Peter Newman <peternewman@google.com>
Reviewed-by: Fenghua Yu <fenghuay@nvdia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
Changes since v3:
Correct type checking, use mpam_feat_msmon_mbwu_<n>counter
---
 drivers/resctrl/mpam_devices.c  | 48 ++++++++++++++++++++++++++++++++-
 drivers/resctrl/mpam_internal.h |  2 ++
 2 files changed, 49 insertions(+), 1 deletion(-)

diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index af0cd44c7517..a4bc86e6127e 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -1075,6 +1075,7 @@ static void __ris_msmon_read(void *arg)
 	bool overflow;
 	struct mon_read *m = arg;
 	struct mon_cfg *ctx = m->ctx;
+	bool reset_on_next_read = false;
 	struct mpam_msc_ris *ris = m->ris;
 	struct msmon_mbwu_state *mbwu_state;
 	struct mpam_props *rprops = &ris->props;
@@ -1089,6 +1090,20 @@ static void __ris_msmon_read(void *arg)
 		  FIELD_PREP(MSMON_CFG_MON_SEL_RIS, ris->ris_idx);
 	mpam_write_monsel_reg(msc, CFG_MON_SEL, mon_sel);
 
+	switch (m->type) {
+	case mpam_feat_msmon_mbwu_31counter:
+	case mpam_feat_msmon_mbwu_44counter:
+	case mpam_feat_msmon_mbwu_63counter:
+		mbwu_state = &ris->mbwu_state[ctx->mon];
+		if (mbwu_state) {
+			reset_on_next_read = mbwu_state->reset_on_next_read;
+			mbwu_state->reset_on_next_read = false;
+		}
+		break;
+	default:
+		break;
+	}
+
 	/*
 	 * Read the existing configuration to avoid re-writing the same values.
 	 * This saves waiting for 'nrdy' on subsequent reads.
@@ -1106,7 +1121,7 @@ static void __ris_msmon_read(void *arg)
 	config_mismatch = cur_flt != flt_val ||
 			  cur_ctl != (ctl_val | MSMON_CFG_x_CTL_EN);
 
-	if (config_mismatch) {
+	if (config_mismatch || reset_on_next_read) {
 		write_msmon_ctl_flt_vals(m, ctl_val, flt_val);
 		overflow = false;
 	} else if (overflow) {
@@ -1263,6 +1278,37 @@ int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
 	return err;
 }
 
+void mpam_msmon_reset_mbwu(struct mpam_component *comp, struct mon_cfg *ctx)
+{
+	struct mpam_msc *msc;
+	struct mpam_vmsc *vmsc;
+	struct mpam_msc_ris *ris;
+
+	if (!mpam_is_enabled())
+		return;
+
+	guard(srcu)(&mpam_srcu);
+	list_for_each_entry_srcu(vmsc, &comp->vmsc, comp_list,
+				 srcu_read_lock_held(&mpam_srcu)) {
+		if (!mpam_has_feature(mpam_feat_msmon_mbwu, &vmsc->props))
+			continue;
+
+		msc = vmsc->msc;
+		list_for_each_entry_srcu(ris, &vmsc->ris, vmsc_list,
+					 srcu_read_lock_held(&mpam_srcu)) {
+			if (!mpam_has_feature(mpam_feat_msmon_mbwu, &ris->props))
+				continue;
+
+			if (WARN_ON_ONCE(!mpam_mon_sel_lock(msc)))
+				continue;
+
+			ris->mbwu_state[ctx->mon].correction = 0;
+			ris->mbwu_state[ctx->mon].reset_on_next_read = true;
+			mpam_mon_sel_unlock(msc);
+		}
+	}
+}
+
 static void mpam_reset_msc_bitmap(struct mpam_msc *msc, u16 reg, u16 wd)
 {
 	u32 num_words, msb;
diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index d3eb92b79b98..5d023eade398 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -209,6 +209,7 @@ struct mon_cfg {
 /* Changes to msmon_mbwu_state are protected by the msc's mon_sel_lock. */
 struct msmon_mbwu_state {
 	bool		enabled;
+	bool		reset_on_next_read;
 	struct mon_cfg	cfg;
 
 	/*
@@ -368,6 +369,7 @@ int mpam_apply_config(struct mpam_component *comp, u16 partid,
 
 int mpam_msmon_read(struct mpam_component *comp, struct mon_cfg *ctx,
 		    enum mpam_device_features, u64 *val);
+void mpam_msmon_reset_mbwu(struct mpam_component *comp, struct mon_cfg *ctx);
 
 int mpam_get_cpumask_from_cache_id(unsigned long cache_id, u32 cache_level,
 				   cpumask_t *affinity);
-- 
2.43.0

[PATCH v5 32/34] arm_mpam: Add kunit test for bitmap reset

[Ben Horgan]

From: James Morse <james.morse@arm.com>

The bitmap reset code has been a source of bugs. Add a unit test.

This currently has to be built in, as the rest of the driver is
builtin.

Suggested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/Kconfig             |  9 ++++
 drivers/resctrl/mpam_devices.c      |  4 ++
 drivers/resctrl/test_mpam_devices.c | 69 +++++++++++++++++++++++++++++
 3 files changed, 82 insertions(+)
 create mode 100644 drivers/resctrl/test_mpam_devices.c

diff --git a/drivers/resctrl/Kconfig b/drivers/resctrl/Kconfig
index 5f7f748e611e..c808e0470394 100644
--- a/drivers/resctrl/Kconfig
+++ b/drivers/resctrl/Kconfig
@@ -12,4 +12,13 @@ config ARM64_MPAM_DRIVER_DEBUG
 	help
 	  Say yes here to enable debug messages from the MPAM driver.
 
+config MPAM_KUNIT_TEST
+	bool "KUnit tests for MPAM driver " if !KUNIT_ALL_TESTS
+	depends on KUNIT=y
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this option to run tests in the MPAM driver.
+
+	  If unsure, say N.
+
 endif
diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
index a4bc86e6127e..342525d671df 100644
--- a/drivers/resctrl/mpam_devices.c
+++ b/drivers/resctrl/mpam_devices.c
@@ -2717,3 +2717,7 @@ static int __init mpam_msc_driver_init(void)
 
 /* Must occur after arm64_mpam_register_cpus() from arch_initcall() */
 subsys_initcall(mpam_msc_driver_init);
+
+#ifdef CONFIG_MPAM_KUNIT_TEST
+#include "test_mpam_devices.c"
+#endif
diff --git a/drivers/resctrl/test_mpam_devices.c b/drivers/resctrl/test_mpam_devices.c
new file mode 100644
index 000000000000..0cfb41b665c4
--- /dev/null
+++ b/drivers/resctrl/test_mpam_devices.c
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2025 Arm Ltd.
+/* This file is intended to be included into mpam_devices.c */
+
+#include <kunit/test.h>
+
+static void test_mpam_reset_msc_bitmap(struct kunit *test)
+{
+	char __iomem *buf = kunit_kzalloc(test, SZ_16K, GFP_KERNEL);
+	struct mpam_msc fake_msc = {};
+	u32 *test_result;
+
+	if (!buf)
+		return;
+
+	fake_msc.mapped_hwpage = buf;
+	fake_msc.mapped_hwpage_sz = SZ_16K;
+	cpumask_copy(&fake_msc.accessibility, cpu_possible_mask);
+
+	/* Satisfy lockdep checks */
+	mutex_init(&fake_msc.part_sel_lock);
+	mutex_lock(&fake_msc.part_sel_lock);
+
+	test_result = (u32 *)(buf + MPAMCFG_CPBM);
+
+	mpam_reset_msc_bitmap(&fake_msc, MPAMCFG_CPBM, 0);
+	KUNIT_EXPECT_EQ(test, test_result[0], 0);
+	KUNIT_EXPECT_EQ(test, test_result[1], 0);
+	test_result[0] = 0;
+	test_result[1] = 0;
+
+	mpam_reset_msc_bitmap(&fake_msc, MPAMCFG_CPBM, 1);
+	KUNIT_EXPECT_EQ(test, test_result[0], 1);
+	KUNIT_EXPECT_EQ(test, test_result[1], 0);
+	test_result[0] = 0;
+	test_result[1] = 0;
+
+	mpam_reset_msc_bitmap(&fake_msc, MPAMCFG_CPBM, 16);
+	KUNIT_EXPECT_EQ(test, test_result[0], 0xffff);
+	KUNIT_EXPECT_EQ(test, test_result[1], 0);
+	test_result[0] = 0;
+	test_result[1] = 0;
+
+	mpam_reset_msc_bitmap(&fake_msc, MPAMCFG_CPBM, 32);
+	KUNIT_EXPECT_EQ(test, test_result[0], 0xffffffff);
+	KUNIT_EXPECT_EQ(test, test_result[1], 0);
+	test_result[0] = 0;
+	test_result[1] = 0;
+
+	mpam_reset_msc_bitmap(&fake_msc, MPAMCFG_CPBM, 33);
+	KUNIT_EXPECT_EQ(test, test_result[0], 0xffffffff);
+	KUNIT_EXPECT_EQ(test, test_result[1], 1);
+	test_result[0] = 0;
+	test_result[1] = 0;
+
+	mutex_unlock(&fake_msc.part_sel_lock);
+}
+
+static struct kunit_case mpam_devices_test_cases[] = {
+	KUNIT_CASE(test_mpam_reset_msc_bitmap),
+	{}
+};
+
+static struct kunit_suite mpam_devices_test_suite = {
+	.name = "mpam_devices_test_suite",
+	.test_cases = mpam_devices_test_cases,
+};
+
+kunit_test_suites(&mpam_devices_test_suite);
-- 
2.43.0

[PATCH v5 33/34] arm_mpam: Add kunit tests for props_mismatch()

[Ben Horgan]

From: James Morse <james.morse@arm.com>

When features are mismatched between MSC the way features are combined
to the class determines whether resctrl can support this SoC.

Add some tests to illustrate the sort of thing that is expected to
work, and those that must be removed.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Carl Worth <carl@os.amperecomputing.com>
Tested-by: Gavin Shan <gshan@redhat.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 drivers/resctrl/mpam_internal.h     |  14 +-
 drivers/resctrl/test_mpam_devices.c | 320 ++++++++++++++++++++++++++++
 2 files changed, 333 insertions(+), 1 deletion(-)

diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
index 5d023eade398..d9312bbbf1f1 100644
--- a/drivers/resctrl/mpam_internal.h
+++ b/drivers/resctrl/mpam_internal.h
@@ -23,6 +23,12 @@ struct platform_device;
 
 DECLARE_STATIC_KEY_FALSE(mpam_enabled);
 
+#ifdef CONFIG_MPAM_KUNIT_TEST
+#define PACKED_FOR_KUNIT __packed
+#else
+#define PACKED_FOR_KUNIT
+#endif
+
 static inline bool mpam_is_enabled(void)
 {
 	return static_branch_likely(&mpam_enabled);
@@ -184,7 +190,13 @@ struct mpam_props {
 	u16			dspri_wd;
 	u16			num_csu_mon;
 	u16			num_mbwu_mon;
-};
+
+/*
+ * Kunit tests use memset() to set up feature combinations that should be
+ * removed, and will false-positive if the compiler introduces padding that
+ * isn't cleared during sanitisation.
+ */
+} PACKED_FOR_KUNIT;
 
 #define mpam_has_feature(_feat, x)	test_bit(_feat, (x)->features)
 #define mpam_set_feature(_feat, x)	set_bit(_feat, (x)->features)
diff --git a/drivers/resctrl/test_mpam_devices.c b/drivers/resctrl/test_mpam_devices.c
index 0cfb41b665c4..3e8d564a0c64 100644
--- a/drivers/resctrl/test_mpam_devices.c
+++ b/drivers/resctrl/test_mpam_devices.c
@@ -4,6 +4,324 @@
 
 #include <kunit/test.h>
 
+/*
+ * This test catches fields that aren't being sanitised - but can't tell you
+ * which one...
+ */
+static void test__props_mismatch(struct kunit *test)
+{
+	struct mpam_props parent = { 0 };
+	struct mpam_props child;
+
+	memset(&child, 0xff, sizeof(child));
+	__props_mismatch(&parent, &child, false);
+
+	memset(&child, 0, sizeof(child));
+	KUNIT_EXPECT_EQ(test, memcmp(&parent, &child, sizeof(child)), 0);
+
+	memset(&child, 0xff, sizeof(child));
+	__props_mismatch(&parent, &child, true);
+
+	KUNIT_EXPECT_EQ(test, memcmp(&parent, &child, sizeof(child)), 0);
+}
+
+static struct list_head fake_classes_list;
+static struct mpam_class fake_class = { 0 };
+static struct mpam_component fake_comp1 = { 0 };
+static struct mpam_component fake_comp2 = { 0 };
+static struct mpam_vmsc fake_vmsc1 = { 0 };
+static struct mpam_vmsc fake_vmsc2 = { 0 };
+static struct mpam_msc fake_msc1 = { 0 };
+static struct mpam_msc fake_msc2 = { 0 };
+static struct mpam_msc_ris fake_ris1 = { 0 };
+static struct mpam_msc_ris fake_ris2 = { 0 };
+static struct platform_device fake_pdev = { 0 };
+
+static inline void reset_fake_hierarchy(void)
+{
+	INIT_LIST_HEAD(&fake_classes_list);
+
+	memset(&fake_class, 0, sizeof(fake_class));
+	fake_class.level = 3;
+	fake_class.type = MPAM_CLASS_CACHE;
+	INIT_LIST_HEAD_RCU(&fake_class.components);
+	INIT_LIST_HEAD(&fake_class.classes_list);
+
+	memset(&fake_comp1, 0, sizeof(fake_comp1));
+	memset(&fake_comp2, 0, sizeof(fake_comp2));
+	fake_comp1.comp_id = 1;
+	fake_comp2.comp_id = 2;
+	INIT_LIST_HEAD(&fake_comp1.vmsc);
+	INIT_LIST_HEAD(&fake_comp1.class_list);
+	INIT_LIST_HEAD(&fake_comp2.vmsc);
+	INIT_LIST_HEAD(&fake_comp2.class_list);
+
+	memset(&fake_vmsc1, 0, sizeof(fake_vmsc1));
+	memset(&fake_vmsc2, 0, sizeof(fake_vmsc2));
+	INIT_LIST_HEAD(&fake_vmsc1.ris);
+	INIT_LIST_HEAD(&fake_vmsc1.comp_list);
+	fake_vmsc1.msc = &fake_msc1;
+	INIT_LIST_HEAD(&fake_vmsc2.ris);
+	INIT_LIST_HEAD(&fake_vmsc2.comp_list);
+	fake_vmsc2.msc = &fake_msc2;
+
+	memset(&fake_ris1, 0, sizeof(fake_ris1));
+	memset(&fake_ris2, 0, sizeof(fake_ris2));
+	fake_ris1.ris_idx = 1;
+	INIT_LIST_HEAD(&fake_ris1.msc_list);
+	fake_ris2.ris_idx = 2;
+	INIT_LIST_HEAD(&fake_ris2.msc_list);
+
+	fake_msc1.pdev = &fake_pdev;
+	fake_msc2.pdev = &fake_pdev;
+
+	list_add(&fake_class.classes_list, &fake_classes_list);
+}
+
+static void test_mpam_enable_merge_features(struct kunit *test)
+{
+	reset_fake_hierarchy();
+
+	mutex_lock(&mpam_list_lock);
+
+	/* One Class+Comp, two RIS in one vMSC with common features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = NULL;
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = NULL;
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc1;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc1.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 4;
+	fake_ris2.props.cpbm_wd = 4;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 4);
+
+	reset_fake_hierarchy();
+
+	/* One Class+Comp, two RIS in one vMSC with non-overlapping features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = NULL;
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = NULL;
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc1;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc1.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cmax_cmin, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 4;
+	fake_ris2.props.cmax_wd = 4;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	/* Multiple RIS within one MSC controlling the same resource can be mismatched */
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cmax_cmin, &fake_class.props));
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cmax_cmin, &fake_vmsc1.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 4);
+	KUNIT_EXPECT_EQ(test, fake_vmsc1.props.cmax_wd, 4);
+	KUNIT_EXPECT_EQ(test, fake_class.props.cmax_wd, 4);
+
+	reset_fake_hierarchy();
+
+	/* One Class+Comp, two MSC with overlapping features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = NULL;
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = &fake_comp1;
+	list_add(&fake_vmsc2.comp_list, &fake_comp1.vmsc);
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc2;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc2.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 4;
+	fake_ris2.props.cpbm_wd = 4;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 4);
+
+	reset_fake_hierarchy();
+
+	/* One Class+Comp, two MSC with non-overlapping features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = NULL;
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = &fake_comp1;
+	list_add(&fake_vmsc2.comp_list, &fake_comp1.vmsc);
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc2;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc2.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cmax_cmin, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 4;
+	fake_ris2.props.cmax_wd = 4;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	/*
+	 * Multiple RIS in different MSC can't control the same resource,
+	 * mismatched features can not be supported.
+	 */
+	KUNIT_EXPECT_FALSE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_FALSE(test, mpam_has_feature(mpam_feat_cmax_cmin, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 0);
+	KUNIT_EXPECT_EQ(test, fake_class.props.cmax_wd, 0);
+
+	reset_fake_hierarchy();
+
+	/* One Class+Comp, two MSC with incompatible overlapping features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = NULL;
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = &fake_comp1;
+	list_add(&fake_vmsc2.comp_list, &fake_comp1.vmsc);
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc2;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc2.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris2.props);
+	mpam_set_feature(mpam_feat_mbw_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_mbw_part, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 5;
+	fake_ris2.props.cpbm_wd = 3;
+	fake_ris1.props.mbw_pbm_bits = 5;
+	fake_ris2.props.mbw_pbm_bits = 3;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	/*
+	 * Multiple RIS in different MSC can't control the same resource,
+	 * mismatched features can not be supported.
+	 */
+	KUNIT_EXPECT_FALSE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_FALSE(test, mpam_has_feature(mpam_feat_mbw_part, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 0);
+	KUNIT_EXPECT_EQ(test, fake_class.props.mbw_pbm_bits, 0);
+
+	reset_fake_hierarchy();
+
+	/* One Class+Comp, two MSC with overlapping features that need tweaking */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = NULL;
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = &fake_comp1;
+	list_add(&fake_vmsc2.comp_list, &fake_comp1.vmsc);
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc2;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc2.ris);
+
+	mpam_set_feature(mpam_feat_mbw_min, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_mbw_min, &fake_ris2.props);
+	mpam_set_feature(mpam_feat_cmax_cmax, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cmax_cmax, &fake_ris2.props);
+	fake_ris1.props.bwa_wd = 5;
+	fake_ris2.props.bwa_wd = 3;
+	fake_ris1.props.cmax_wd = 5;
+	fake_ris2.props.cmax_wd = 3;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	/*
+	 * RIS with different control properties need to be sanitised so the
+	 * class has the common set of properties.
+	 */
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_mbw_min, &fake_class.props));
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cmax_cmax, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.bwa_wd, 3);
+	KUNIT_EXPECT_EQ(test, fake_class.props.cmax_wd, 3);
+
+	reset_fake_hierarchy();
+
+	/* One Class Two Comp with overlapping features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = &fake_class;
+	list_add(&fake_comp2.class_list, &fake_class.components);
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = &fake_comp2;
+	list_add(&fake_vmsc2.comp_list, &fake_comp2.vmsc);
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc2;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc2.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 4;
+	fake_ris2.props.cpbm_wd = 4;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	KUNIT_EXPECT_TRUE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 4);
+
+	reset_fake_hierarchy();
+
+	/* One Class Two Comp with non-overlapping features */
+	fake_comp1.class = &fake_class;
+	list_add(&fake_comp1.class_list, &fake_class.components);
+	fake_comp2.class = &fake_class;
+	list_add(&fake_comp2.class_list, &fake_class.components);
+	fake_vmsc1.comp = &fake_comp1;
+	list_add(&fake_vmsc1.comp_list, &fake_comp1.vmsc);
+	fake_vmsc2.comp = &fake_comp2;
+	list_add(&fake_vmsc2.comp_list, &fake_comp2.vmsc);
+	fake_ris1.vmsc = &fake_vmsc1;
+	list_add(&fake_ris1.vmsc_list, &fake_vmsc1.ris);
+	fake_ris2.vmsc = &fake_vmsc2;
+	list_add(&fake_ris2.vmsc_list, &fake_vmsc2.ris);
+
+	mpam_set_feature(mpam_feat_cpor_part, &fake_ris1.props);
+	mpam_set_feature(mpam_feat_cmax_cmin, &fake_ris2.props);
+	fake_ris1.props.cpbm_wd = 4;
+	fake_ris2.props.cmax_wd = 4;
+
+	mpam_enable_merge_features(&fake_classes_list);
+
+	/*
+	 * Multiple components can't control the same resource, mismatched features can
+	 * not be supported.
+	 */
+	KUNIT_EXPECT_FALSE(test, mpam_has_feature(mpam_feat_cpor_part, &fake_class.props));
+	KUNIT_EXPECT_FALSE(test, mpam_has_feature(mpam_feat_cmax_cmin, &fake_class.props));
+	KUNIT_EXPECT_EQ(test, fake_class.props.cpbm_wd, 0);
+	KUNIT_EXPECT_EQ(test, fake_class.props.cmax_wd, 0);
+
+	mutex_unlock(&mpam_list_lock);
+}
+
 static void test_mpam_reset_msc_bitmap(struct kunit *test)
 {
 	char __iomem *buf = kunit_kzalloc(test, SZ_16K, GFP_KERNEL);
@@ -58,6 +376,8 @@ static void test_mpam_reset_msc_bitmap(struct kunit *test)
 
 static struct kunit_case mpam_devices_test_cases[] = {
 	KUNIT_CASE(test_mpam_reset_msc_bitmap),
+	KUNIT_CASE(test_mpam_enable_merge_features),
+	KUNIT_CASE(test__props_mismatch),
 	{}
 };
 
-- 
2.43.0

[PATCH v5 34/34] MAINTAINERS: new entry for MPAM Driver

[Ben Horgan]

Create a maintainer entry for the new MPAM Driver. Add myself and
James Morse as maintainers. James created the driver and I have
taken up the later versions of his series.

Cc: James Morse <james.morse@arm.com>
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
---
 MAINTAINERS | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 46bd8e033042..ec9b2b255bef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17463,6 +17463,14 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
 F:	drivers/video/backlight/mp3309c.c
 
+MPAM DRIVER
+M:	James Morse <james.morse@arm.com>
+M:	Ben Horgan <ben.horgan@arm.com>
+S:	Maintained
+F:	drivers/resctrl/mpam_*
+F:	drivers/resctrl/test_mpam_*
+F:	include/linux/arm_mpam.h
+
 MPS MP2869 DRIVER
 M:	Wensheng Wang <wenswang@yeah.net>
 L:	linux-hwmon@vger.kernel.org
-- 
2.43.0

Re: [PATCH v5 08/34] ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret() helper

[Rafael J. Wysocki]

On Mon, Nov 17, 2025 at 6:01 PM Ben Horgan <ben.horgan@arm.com> wrote:
>
> Define a cleanup helper for use with __free to release the acpi table when
> the pointer goes out of scope. Also, introduce the helper
> acpi_get_table_ret() to simplify a commonly used pattern involving
> acpi_get_table().
>
> These are first used in a subsequent commit.
>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
>  include/linux/acpi.h | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
>
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index a9dbacabdf89..1124b7dc79fd 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -8,6 +8,7 @@
>  #ifndef _LINUX_ACPI_H
>  #define _LINUX_ACPI_H
>
> +#include <linux/cleanup.h>
>  #include <linux/errno.h>
>  #include <linux/ioport.h>      /* for struct resource */
>  #include <linux/resource_ext.h>
> @@ -221,6 +222,17 @@ void acpi_reserve_initial_tables (void);
>  void acpi_table_init_complete (void);
>  int acpi_table_init (void);
>
> +static inline struct acpi_table_header *acpi_get_table_ret(char *signature, u32 instance)

Maybe call this acpi_get_table_pointer() ?

> +{
> +       struct acpi_table_header *table;
> +       int status = acpi_get_table(signature, instance, &table);
> +
> +       if (ACPI_FAILURE(status))
> +               return ERR_PTR(-ENOENT);
> +       return table;
> +}
> +DEFINE_FREE(acpi_put_table, struct acpi_table_header *, if (!IS_ERR_OR_NULL(_T)) acpi_put_table(_T))
> +
>  int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
>  int __init_or_acpilib acpi_table_parse_entries(char *id,
>                 unsigned long table_size, int entry_id,
> --

Re: [PATCH v5 10/34] arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate

[Markus Elfring]

…
> +++ b/drivers/resctrl/mpam_devices.c
> @@ -0,0 +1,190 @@
…
> +static int mpam_msc_drv_probe(struct platform_device *pdev)
> +{
…
> +	mutex_lock(&mpam_list_lock);
> +	msc = do_mpam_msc_drv_probe(pdev);
> +	mutex_unlock(&mpam_list_lock);
…

Does anything hinder you to integrate statements like “guard(mutex)(&mpam_list_lock);” here?
https://elixir.bootlin.com/linux/v6.18-rc6/source/include/linux/mutex.h#L228

Regards,
Markus

Re: [PATCH v5 34/34] MAINTAINERS: new entry for MPAM Driver

[Catalin Marinas]

On Mon, Nov 17, 2025 at 05:00:13PM +0000, Ben Horgan wrote:
> Create a maintainer entry for the new MPAM Driver. Add myself and
> James Morse as maintainers. James created the driver and I have
> taken up the later versions of his series.
> 
> Cc: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
>  MAINTAINERS | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 46bd8e033042..ec9b2b255bef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17463,6 +17463,14 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
>  F:	drivers/video/backlight/mp3309c.c
>  
> +MPAM DRIVER
> +M:	James Morse <james.morse@arm.com>
> +M:	Ben Horgan <ben.horgan@arm.com>
> +S:	Maintained
> +F:	drivers/resctrl/mpam_*
> +F:	drivers/resctrl/test_mpam_*
> +F:	include/linux/arm_mpam.h

Acked-by: Catalin Marinas <catalin.marinas@arm.com>

Greg, are you ok with the above maintainers entry? Happy to queue
patches for this via the arm64 tree (or at least the initial drop).

Reinette, Tony, I now realised you haven't been cc'ed on this series:

https://lore.kernel.org/r/20251117170014.4113754-1-ben.horgan@arm.com

While it doesn't touch fs/resctrl/, it's going to be a user of that API.
Are you ok with this maintainer setup? I wouldn't mind at all if you
want to be a co-maintainers or reviewers of drivers/resctrl/* (e.g.
adding this under the RDT entry) but I guess you would not be looking
forward to more email traffic.

Thanks.

-- 
Catalin

Re: [PATCH v5 34/34] MAINTAINERS: new entry for MPAM Driver

[Reinette Chatre]

Hi Catalin,

On 11/17/25 12:02 PM, Catalin Marinas wrote:
> On Mon, Nov 17, 2025 at 05:00:13PM +0000, Ben Horgan wrote:
>> Create a maintainer entry for the new MPAM Driver. Add myself and
>> James Morse as maintainers. James created the driver and I have
>> taken up the later versions of his series.
>>
>> Cc: James Morse <james.morse@arm.com>
>> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
>> ---
>>  MAINTAINERS | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 46bd8e033042..ec9b2b255bef 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -17463,6 +17463,14 @@ S:	Maintained
>>  F:	Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
>>  F:	drivers/video/backlight/mp3309c.c
>>  
>> +MPAM DRIVER
>> +M:	James Morse <james.morse@arm.com>
>> +M:	Ben Horgan <ben.horgan@arm.com>
>> +S:	Maintained
>> +F:	drivers/resctrl/mpam_*
>> +F:	drivers/resctrl/test_mpam_*
>> +F:	include/linux/arm_mpam.h
> 
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> 
> Greg, are you ok with the above maintainers entry? Happy to queue
> patches for this via the arm64 tree (or at least the initial drop).
> 
> Reinette, Tony, I now realised you haven't been cc'ed on this series:
> 
> https://lore.kernel.org/r/20251117170014.4113754-1-ben.horgan@arm.com

Thank you for bringing this to our attention.

> 
> While it doesn't touch fs/resctrl/, it's going to be a user of that API.
> Are you ok with this maintainer setup? I wouldn't mind at all if you
> want to be a co-maintainers or reviewers of drivers/resctrl/* (e.g.
> adding this under the RDT entry) but I guess you would not be looking
> forward to more email traffic.

I am ok with this maintainer setup. Considering the different status roles and values
I think it best to keep these as separate entries in MAINTAINERS.

Even so, I would appreciate being aware how MPAM uses resctrl fs. Being a reviewer
(not maintainer) of the "MPAM DRIVER" should ensure that I am cc'd on future patches,
similar to the roles James and Dave (Martin) have in resctrl fs MAINTAINERS entry. I
understand this is a major addition so I can surely also just do what other folks
do when interested in following the work by using, for example, lei.

Reinette

Re: [PATCH v5 00/34] arm_mpam: Add basic mpam driver

[Fenghua Yu]

On 11/17/25 08:59, Ben Horgan wrote:
> Hi all,
> 
> Not much substantial changed in this iteration. Some rework relating to
> acpi_pptt_cache and a related proposed fix in acpica. Lots of little tidy ups
> here and there.
> 
> Thanks for all the reviews and testing so far. As I mentioned before, it would be
> great to get this taken up quickly. There are lots more patches to come before
> we have a working MPAM story and this driver is hidden behind the expert
> config. See patches for changelogs and below for branches.
The patches pass my tests.

Thanks.

-Fenghua

Re: [PATCH v5 09/34] ACPI / MPAM: Parse the MPAM table

[Fenghua Yu]

On 11/17/25 08:59, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> Add code to parse the arm64 specific MPAM table, looking up the cache
> level from the PPTT and feeding the end result into the MPAM driver.
> 
> This happens in two stages. Platform devices are created first for the
> MSC devices. Once the driver probes it calls acpi_mpam_parse_resources()
> to discover the RIS entries the MSC contains.
> 
> For now the MPAM hook mpam_ris_create() is stubbed out, but will update
> the MPAM driver with optional discovered data about the RIS entries.
> 
> CC: Carl Worth <carl@os.amperecomputing.com>
> Link: https://developer.arm.com/documentation/den0065/3-0bet/?lang=en
> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Fenghua Yu]

Hi, Ben,

On 11/17/25 08:59, Ben Horgan wrote:
> In actbl2.h, acpi_pptt_cache describes the fields in the original
> Cache Type Structure. In PPTT table version 3 a new field was added at the
> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
> including all v1 fields it just includes this one.
> 
> In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
> contain all the fields of the Cache Type Structure . Update the existing
> code to use this new struct. This simplifies the code and removes a
> non-standard use of ACPI_ADD_PTR.
> 
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
> include all fields. https://github.com/acpica/acpica/pull/1059
> 
> Change since v4:
> Use fields directly in acpi_pptt_cache_v1_full
> Delay the casting
> 
> Changes since v3:
> New patch
> ---
>   drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>   1 file changed, 37 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 2856254e29d7..53fde9bd8140 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -21,6 +21,25 @@
>   #include <linux/cacheinfo.h>
>   #include <acpi/processor.h>
>   
> +/*
> + * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
> + * only contains the cache_id field rather than all the fields of the
> + * Cache Type Structure. Use this alternative structure until it is
> + * resolved in acpica.
> + */
> +struct acpi_pptt_cache_v1_full {
> +	struct acpi_subtable_header header;
> +	u16 reserved;
> +	u32 flags;
> +	u32 next_level_of_cache;
> +	u32 size;
> +	u32 number_of_sets;
> +	u8 associativity;
> +	u8 attributes;
> +	u16 line_size;
> +	u32 cache_id;
> +};

Should "__packed" be added to this table?

Should this table be defined in include/acpi/actbl2.h? Seems defining 
the two cache tables separately in two places are not natural?

Thanks.

-Fenghua

Re: [PATCH v5 11/34] arm_mpam: Add the class and component structures for firmware described ris

[Fenghua Yu]

On 11/17/25 08:59, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> An MSC is a container of resources, each identified by their RIS index.
> Some RIS are described by firmware to provide their position in the system.
> Others are discovered when the driver probes the hardware.
> 
> To configure a resource it needs to be found by its class, e.g. 'L2'.
> There are two kinds of grouping, a class is a set of components, which
> are visible to user-space as there are likely to be multiple instances
> of the L2 cache. (e.g. one per cluster or package)
> 
> Add support for creating and destroying structures to allow a hierarchy
> of resources to be created.
> 
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

RE: [PATCH v5 10/34] arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate

[Shaopeng Tan (Fujitsu)]

> From: James Morse <james.morse@arm.com>
> 
> Probing MPAM is convoluted. MSCs that are integrated with a CPU may only be
> accessible from those CPUs, and they may not be online.
> Touching the hardware early is pointless as MPAM can't be used until the
> system-wide common values for num_partid and num_pmg have been
> discovered.
> 
> Start with driver probe/remove and mapping the MSC.
> 
> Cc: Carl Worth <carl@os.amperecomputing.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---

Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>

RE: [PATCH v5 23/34] arm_mpam: Allow configuration to be applied and restored during cpu online

[Shaopeng Tan (Fujitsu)]

> From: James Morse <james.morse@arm.com>
> 
> When CPUs come online the MSC's original configuration should be restored.
> 
> Add struct mpam_config to hold the configuration. For each component, this
> has a bitmap of features that have been changed from the reset values. The
> mpam_config is also used on RIS reset where all bits are set to ensure all
> features are reset.
> 
> Once the maximum partid is known, allocate a configuration array for each
> component, and reprogram each RIS configuration from this.
> 
> CC: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Cc: Shaopeng Tan (Fujitsu) tan.shaopeng@fujitsu.com
> Cc: Peter Newman peternewman@google.com
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---

Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>

Re: [PATCH v5 21/34] arm_mpam: Register and enable IRQs

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> Register and enable error IRQs. All the MPAM error interrupts indicate a
> software bug, e.g. out of range partid. If the error interrupt is ever
> signalled, attempt to disable MPAM.
> 
> Only the irq handler accesses the MPAMF_ESR register, so no locking is
> needed. The work to disable MPAM after an error needs to happen at process
> context as it takes mutex. It also unregisters the interrupts, meaning
> it can't be done from the threaded part of a threaded interrupt.
> Instead, mpam_disable() gets scheduled.
> 
> Enabling the IRQs in the MSC may involve cross calling to a CPU that
> can access the MSC.
> 
> Once the IRQ is requested, the mpam_disable() path can be called
> asynchronously, which will walk structures sized by max_partid. Ensure
> this size is fixed before the interrupt is requested.
> 
> CC: Rohit Mathew <rohit.mathew@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Rohit Mathew <rohit.mathew@arm.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

RE: [PATCH v5 00/34] arm_mpam: Add basic mpam driver

[Shaopeng Tan (Fujitsu)]

Hello Ben,

I tested driver v5 and mpam driver again. There is no problem.
This series looks fine to me.

Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>

Re: [PATCH v5 00/34] arm_mpam: Add basic mpam driver

[Hanjun Guo]

On 2025/11/18 0:59, Ben Horgan wrote:
> Hi all,
> 
> Not much substantial changed in this iteration. Some rework relating to
> acpi_pptt_cache and a related proposed fix in acpica. Lots of little tidy ups
> here and there.
> 
> Thanks for all the reviews and testing so far. As I mentioned before, it would be
> great to get this taken up quickly. There are lots more patches to come before
> we have a working MPAM story and this driver is hidden behind the expert
> config. See patches for changelogs and below for branches.

Tested on ARM64 Kunpeng server with MPAM devices test suite, works
as expected.

Tested-by: Hanjun Guo <guohanjun@huawei.com>

Thanks
Hanjun

Re: [PATCH v5 01/34] ACPI / PPTT: Add a helper to fill a cpumask from a processor container

[Hanjun Guo]

On 2025/11/18 0:59, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> The ACPI MPAM table uses the UID of a processor container specified in
> the PPTT to indicate the subset of CPUs and cache topology that can
> access each MPAM System Component (MSC).
> 
> This information is not directly useful to the kernel. The equivalent
> cpumask is needed instead.
> 
> Add a helper to find the processor container by its id, then walk
> the possible CPUs to fill a cpumask with the CPUs that have this
> processor container as a parent.
> 
> CC: Dave Martin <dave.martin@arm.com>
> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v4:
> Remove blank line
> 
> Changes since v3:
> Refer to processor hierarchy in comments (Jonathan)
> Fix indent (Jonathan)
> ---
>   drivers/acpi/pptt.c  | 84 ++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/acpi.h |  3 ++
>   2 files changed, 87 insertions(+)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 54676e3d82dd..b8248c0092fe 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -817,3 +817,87 @@ int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   	return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
>   					  ACPI_PPTT_ACPI_IDENTICAL);
>   }
> +
> +/**
> + * acpi_pptt_get_child_cpus() - Find all the CPUs below a PPTT
> + * processor hierarchy node
> + *
> + * @table_hdr:		A reference to the PPTT table
> + * @parent_node:	A pointer to the processor hierarchy node in the
> + *			table_hdr
> + * @cpus:		A cpumask to fill with the CPUs below @parent_node
> + *
> + * Walks up the PPTT from every possible CPU to find if the provided
> + * @parent_node is a parent of this CPU.
> + */
> +static void acpi_pptt_get_child_cpus(struct acpi_table_header *table_hdr,
> +				     struct acpi_pptt_processor *parent_node,
> +				     cpumask_t *cpus)
> +{
> +	struct acpi_pptt_processor *cpu_node;
> +	u32 acpi_id;
> +	int cpu;
> +
> +	cpumask_clear(cpus);
> +
> +	for_each_possible_cpu(cpu) {
> +		acpi_id = get_acpi_id_for_cpu(cpu);
> +		cpu_node = acpi_find_processor_node(table_hdr, acpi_id);
> +
> +		while (cpu_node) {
> +			if (cpu_node == parent_node) {
> +				cpumask_set_cpu(cpu, cpus);
> +				break;
> +			}
> +			cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
> +		}
> +	}
> +}
> +
> +/**
> + * acpi_pptt_get_cpus_from_container() - Populate a cpumask with all CPUs in a
> + *                                       processor container
> + * @acpi_cpu_id:	The UID of the processor container
> + * @cpus:		The resulting CPU mask
> + *
> + * Find the specified Processor Container, and fill @cpus with all the cpus
> + * below it.
> + *
> + * Not all 'Processor Hierarchy' entries in the PPTT are either a CPU
> + * or a Processor Container, they may exist purely to describe a
> + * Private resource. CPUs have to be leaves, so a Processor Container
> + * is a non-leaf that has the 'ACPI Processor ID valid' flag set.
> + */
> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
> +{
> +	struct acpi_table_header *table_hdr;
> +	struct acpi_subtable_header *entry;
> +	unsigned long table_end;
> +	u32 proc_sz;
> +
> +	cpumask_clear(cpus);
> +
> +	table_hdr = acpi_get_pptt();
> +	if (!table_hdr)
> +		return;
> +
> +	table_end = (unsigned long)table_hdr + table_hdr->length;
> +	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
> +			     sizeof(struct acpi_table_pptt));
> +	proc_sz = sizeof(struct acpi_pptt_processor);
> +	while ((unsigned long)entry + proc_sz <= table_end) {
> +		if (entry->type == ACPI_PPTT_TYPE_PROCESSOR) {
> +			struct acpi_pptt_processor *cpu_node;
> +
> +			cpu_node = (struct acpi_pptt_processor *)entry;
> +			if (cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID &&
> +			    !acpi_pptt_leaf_node(table_hdr, cpu_node) &&
> +			    cpu_node->acpi_processor_id == acpi_cpu_id) {
> +				acpi_pptt_get_child_cpus(table_hdr, cpu_node, cpus);
> +				break;
> +			}
> +		}
> +		entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
> +				     entry->length);
> +	}
> +}
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 5ff5d99f6ead..4752ebd48132 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1541,6 +1541,7 @@ int find_acpi_cpu_topology(unsigned int cpu, int level);
>   int find_acpi_cpu_topology_cluster(unsigned int cpu);
>   int find_acpi_cpu_topology_package(unsigned int cpu);
>   int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
>   #else
>   static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
>   {
> @@ -1562,6 +1563,8 @@ static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   {
>   	return -EINVAL;
>   }
> +static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
> +						     cpumask_t *cpus) { }
>   #endif
>   
>   void acpi_arch_init(void);

Reviewed-by: Hanjun Guo <guohanjun@huawei.com>

Thanks
Hanjun

Re: [PATCH v5 10/34] arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate

[Ben Horgan]

Hi Markus,

On 11/17/25 19:50, Markus Elfring wrote:
> …
>> +++ b/drivers/resctrl/mpam_devices.c
>> @@ -0,0 +1,190 @@
> …
>> +static int mpam_msc_drv_probe(struct platform_device *pdev)
>> +{
> …
>> +	mutex_lock(&mpam_list_lock);
>> +	msc = do_mpam_msc_drv_probe(pdev);
>> +	mutex_unlock(&mpam_list_lock);
> …
> 
> Does anything hinder you to integrate statements like “guard(mutex)(&mpam_list_lock);” here?
> https://elixir.bootlin.com/linux/v6.18-rc6/source/include/linux/mutex.h#L228

The mpam_list_lock needs to be dropped before the end of the scope as it
is also taken in mpam_msc_drv_remove().

> 
> Regards,
> Markus

Thanks,

Ben

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Ben Horgan]

Hi Fenghua,

On 11/18/25 04:03, Fenghua Yu wrote:
> Hi, Ben,
> 
> On 11/17/25 08:59, Ben Horgan wrote:
>> In actbl2.h, acpi_pptt_cache describes the fields in the original
>> Cache Type Structure. In PPTT table version 3 a new field was added at
>> the
>> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
>> including all v1 fields it just includes this one.
>>
>> In lieu of this being fixed in acpica, introduce
>> acpi_pptt_cache_v1_full to
>> contain all the fields of the Cache Type Structure . Update the existing
>> code to use this new struct. This simplifies the code and removes a
>> non-standard use of ACPI_ADD_PTR.
>>
>> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
>> ---
>> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
>> include all fields. https://github.com/acpica/acpica/pull/1059
>>
>> Change since v4:
>> Use fields directly in acpi_pptt_cache_v1_full
>> Delay the casting
>>
>> Changes since v3:
>> New patch
>> ---
>>   drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>>   1 file changed, 37 insertions(+), 10 deletions(-)
>>
>> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
>> index 2856254e29d7..53fde9bd8140 100644
>> --- a/drivers/acpi/pptt.c
>> +++ b/drivers/acpi/pptt.c
>> @@ -21,6 +21,25 @@
>>   #include <linux/cacheinfo.h>
>>   #include <acpi/processor.h>
>>   +/*
>> + * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
>> + * only contains the cache_id field rather than all the fields of the
>> + * Cache Type Structure. Use this alternative structure until it is
>> + * resolved in acpica.
>> + */
>> +struct acpi_pptt_cache_v1_full {
>> +    struct acpi_subtable_header header;
>> +    u16 reserved;
>> +    u32 flags;
>> +    u32 next_level_of_cache;
>> +    u32 size;
>> +    u32 number_of_sets;
>> +    u8 associativity;
>> +    u8 attributes;
>> +    u16 line_size;
>> +    u32 cache_id;
>> +};
> 
> Should "__packed" be added to this table?

Yes, I missed that.

> 
> Should this table be defined in include/acpi/actbl2.h? Seems defining
> the two cache tables separately in two places are not natural?

Indeed. The dificulty is that include/acpi/actbl2.h is generated from
acpica. I propose a fix for this in the  pull request mentioned above:
https://github.com/acpica/acpica/pull/1059 This extends
acpi_pptt_cache_v1 to include all the fields in the new version of the
cache type structure (not just cache_id).

One thing I could do if it looks like the acpica change will be accepted
is to temporarily delete acpi_pptt_cache_v1 from include/acpi/actbl2.h
and rename acpi_pptt_cache_v1_full in drivers/acpi/pptt.c to
acpi_pptt_cache_v1. When include/acpi/actbl2.h is updated the conflict
should be evident and the version in drivers/acpi/pptt.c can be dropped.
 I'll keep it like it is for now though as this would be an api breaking
change for acpica and the maintainers may prefer to handle this a
different way.

> 
> Thanks.
> 
> -Fenghua

Thanks,

Ben

Re: [PATCH v5 08/34] ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret() helper

[Ben Horgan]

Hi Rafael,

On 11/17/25 19:46, Rafael J. Wysocki wrote:
> On Mon, Nov 17, 2025 at 6:01 PM Ben Horgan <ben.horgan@arm.com> wrote:
>>
>> Define a cleanup helper for use with __free to release the acpi table when
>> the pointer goes out of scope. Also, introduce the helper
>> acpi_get_table_ret() to simplify a commonly used pattern involving
>> acpi_get_table().
>>
>> These are first used in a subsequent commit.
>>
>> Reviewed-by: Gavin Shan <gshan@redhat.com>
>> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
>> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
>> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
>> Tested-by: Carl Worth <carl@os.amperecomputing.com>
>> Tested-by: Gavin Shan <gshan@redhat.com>
>> Tested-by: Zeng Heng <zengheng4@huawei.com>
>> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
>> ---
>>  include/linux/acpi.h | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index a9dbacabdf89..1124b7dc79fd 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -8,6 +8,7 @@
>>  #ifndef _LINUX_ACPI_H
>>  #define _LINUX_ACPI_H
>>
>> +#include <linux/cleanup.h>
>>  #include <linux/errno.h>
>>  #include <linux/ioport.h>      /* for struct resource */
>>  #include <linux/resource_ext.h>
>> @@ -221,6 +222,17 @@ void acpi_reserve_initial_tables (void);
>>  void acpi_table_init_complete (void);
>>  int acpi_table_init (void);
>>
>> +static inline struct acpi_table_header *acpi_get_table_ret(char *signature, u32 instance)
> 
> Maybe call this acpi_get_table_pointer() ?

Ok, can do.

> 
>> +{
>> +       struct acpi_table_header *table;
>> +       int status = acpi_get_table(signature, instance, &table);
>> +
>> +       if (ACPI_FAILURE(status))
>> +               return ERR_PTR(-ENOENT);
>> +       return table;
>> +}
>> +DEFINE_FREE(acpi_put_table, struct acpi_table_header *, if (!IS_ERR_OR_NULL(_T)) acpi_put_table(_T))
>> +
>>  int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
>>  int __init_or_acpilib acpi_table_parse_entries(char *id,
>>                 unsigned long table_size, int entry_id,
>> --

Thanks,

Ben

Re: [v5 10/34] arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate

[Markus Elfring]

>> Does anything hinder you to integrate statements like “guard(mutex)(&mpam_list_lock);” here?
>> https://elixir.bootlin.com/linux/v6.18-rc6/source/include/linux/mutex.h#L228
> 
> The mpam_list_lock needs to be dropped before the end of the scope as it
> is also taken in mpam_msc_drv_remove().

Would you eventually prefer to use scoped_guard() calls at any more source code places?
https://elixir.bootlin.com/linux/v6.18-rc6/source/include/linux/cleanup.h#L316-L319

Regards,
Markus

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Jonathan Cameron]

On Mon, 17 Nov 2025 16:59:42 +0000
Ben Horgan <ben.horgan@arm.com> wrote:

> In actbl2.h, acpi_pptt_cache describes the fields in the original
> Cache Type Structure. In PPTT table version 3 a new field was added at the
> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
> including all v1 fields it just includes this one.
> 
> In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
> contain all the fields of the Cache Type Structure . Update the existing
> code to use this new struct. This simplifies the code and removes a
> non-standard use of ACPI_ADD_PTR.
> 
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Hi Ben,

I'd like the change to land in ACPICA but if it doesn't this might need
a future rework to avoid long term duplication.  For now with the __packed
marking and a few formatting niggles (see inline) tidied up.

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>

> ---
> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
> include all fields. https://github.com/acpica/acpica/pull/1059
> 
> Change since v4:
> Use fields directly in acpi_pptt_cache_v1_full
> Delay the casting
> 
> Changes since v3:
> New patch
> ---
>  drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>  1 file changed, 37 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 2856254e29d7..53fde9bd8140 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -21,6 +21,25 @@
>  #include <linux/cacheinfo.h>
>  #include <acpi/processor.h>
>  
> +/*
> + * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
> + * only contains the cache_id field rather than all the fields of the
> + * Cache Type Structure. Use this alternative structure until it is
> + * resolved in acpica.
> + */
> +struct acpi_pptt_cache_v1_full {
> +	struct acpi_subtable_header header;
> +	u16 reserved;
> +	u32 flags;
> +	u32 next_level_of_cache;
> +	u32 size;
> +	u32 number_of_sets;
> +	u8 associativity;
> +	u8 attributes;
> +	u16 line_size;
> +	u32 cache_id;
> +};
> +
>  static struct acpi_subtable_header *fetch_pptt_subtable(struct acpi_table_header *table_hdr,
>  							u32 pptt_ref)
>  {
> @@ -56,6 +75,18 @@ static struct acpi_pptt_cache *fetch_pptt_cache(struct acpi_table_header *table_
>  	return (struct acpi_pptt_cache *)fetch_pptt_subtable(table_hdr, pptt_ref);
>  }
>  
> +static struct acpi_pptt_cache_v1_full *upgrade_pptt_cache(struct acpi_pptt_cache *cache)
> +{
> +	if (cache->header.length < sizeof(struct acpi_pptt_cache_v1_full))
> +		return NULL;
> +
> +	/* No use for v1 if the only additional field is invalid */
> +	if (!(cache->flags & ACPI_PPTT_CACHE_ID_VALID))
> +		return NULL;
> +
> +	return (struct acpi_pptt_cache_v1_full *)cache;
> +}
> +
>  static struct acpi_subtable_header *acpi_get_pptt_resource(struct acpi_table_header *table_hdr,
>  							   struct acpi_pptt_processor *node,
>  							   int resource)
> @@ -111,7 +142,7 @@ static unsigned int acpi_pptt_walk_cache(struct acpi_table_header *table_hdr,
>  	if (res->type != ACPI_PPTT_TYPE_CACHE)
>  		return 0;
>  
> -	cache = (struct acpi_pptt_cache *) res;
> +	cache = (struct acpi_pptt_cache *)res;

Unrelated change..

>  	while (cache) {
>  		local_level++;
>  
> @@ -355,7 +386,6 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
>   * @this_leaf: Kernel cache info structure being updated
>   * @found_cache: The PPTT node describing this cache instance
>   * @cpu_node: A unique reference to describe this cache instance
> - * @revision: The revision of the PPTT table
>   *
>   * The ACPI spec implies that the fields in the cache structures are used to
>   * extend and correct the information probed from the hardware. Lets only
> @@ -365,10 +395,9 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
>   */
>  static void update_cache_properties(struct cacheinfo *this_leaf,
>  				    struct acpi_pptt_cache *found_cache,
> -				    struct acpi_pptt_processor *cpu_node,
> -				    u8 revision)
> +				    struct acpi_pptt_processor *cpu_node)
>  {
> -	struct acpi_pptt_cache_v1* found_cache_v1;
> +	struct acpi_pptt_cache_v1_full *found_cache_v1;
>  
>  	this_leaf->fw_token = cpu_node;
>  	if (found_cache->flags & ACPI_PPTT_SIZE_PROPERTY_VALID)
> @@ -418,9 +447,8 @@ static void update_cache_properties(struct cacheinfo *this_leaf,
>  	    found_cache->flags & ACPI_PPTT_CACHE_TYPE_VALID)
>  		this_leaf->type = CACHE_TYPE_UNIFIED;
>  
> -	if (revision >= 3 && (found_cache->flags & ACPI_PPTT_CACHE_ID_VALID)) {
> -		found_cache_v1 = ACPI_ADD_PTR(struct acpi_pptt_cache_v1,
> -	                                      found_cache, sizeof(struct acpi_pptt_cache));
> +	found_cache_v1 =  upgrade_pptt_cache(found_cache);

extra space after =

> +	if (found_cache_v1) {
>  		this_leaf->id = found_cache_v1->cache_id;
>  		this_leaf->attributes |= CACHE_ID;
>  	}
> @@ -445,8 +473,7 @@ static void cache_setup_acpi_cpu(struct acpi_table_header *table,
>  		pr_debug("found = %p %p\n", found_cache, cpu_node);
>  		if (found_cache)
>  			update_cache_properties(this_leaf, found_cache,
> -						ACPI_TO_POINTER(ACPI_PTR_DIFF(cpu_node, table)),
> -						table->revision);
> +						ACPI_TO_POINTER(ACPI_PTR_DIFF(cpu_node, table)));
>  
>  		index++;
>  	}

Re: [PATCH v5 04/34] ACPI / PPTT: Find cache level by cache-id

[Jonathan Cameron]

On Mon, 17 Nov 2025 16:59:43 +0000
Ben Horgan <ben.horgan@arm.com> wrote:

> From: James Morse <james.morse@arm.com>
> 
> The MPAM table identifies caches by id. The MPAM driver also wants to know
> the cache level to determine if the platform is of the shape that can be
> managed via resctrl. Cacheinfo has this information, but only for CPUs that
> are online.
> 
> Waiting for all CPUs to come online is a problem for platforms where
> CPUs are brought online late by user-space.
> 
> Add a helper that walks every possible cache, until it finds the one
> identified by cache-id, then return the level.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>

Re: [PATCH v5 05/34] ACPI / PPTT: Add a helper to fill a cpumask from a cache_id

[Jonathan Cameron]

On Mon, 17 Nov 2025 16:59:44 +0000
Ben Horgan <ben.horgan@arm.com> wrote:

> From: James Morse <james.morse@arm.com>
> 
> MPAM identifies CPUs by the cache_id in the PPTT cache structure.
> 
> The driver needs to know which CPUs are associated with the cache.
> The CPUs may not all be online, so cacheinfo does not have the
> information.
> 
> Add a helper to pull this information out of the PPTT.
> 
> CC: Rohit Mathew <Rohit.Mathew@arm.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>

Re: [PATCH v5 23/34] arm_mpam: Allow configuration to be applied and restored during cpu online

[Jonathan Cameron]

On Mon, 17 Nov 2025 17:00:02 +0000
Ben Horgan <ben.horgan@arm.com> wrote:

> From: James Morse <james.morse@arm.com>
> 
> When CPUs come online the MSC's original configuration should be restored.
> 
> Add struct mpam_config to hold the configuration. For each component, this
> has a bitmap of features that have been changed from the reset values. The
> mpam_config is also used on RIS reset where all bits are set to ensure all
> features are reset.
> 
> Once the maximum partid is known, allocate a configuration array for each
> component, and reprogram each RIS configuration from this.
> 
> CC: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Cc: Shaopeng Tan (Fujitsu) tan.shaopeng@fujitsu.com
> Cc: Peter Newman peternewman@google.com
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>

Re: [PATCH v5 34/34] MAINTAINERS: new entry for MPAM Driver

[Jonathan Cameron]

On Mon, 17 Nov 2025 17:00:13 +0000
Ben Horgan <ben.horgan@arm.com> wrote:

> Create a maintainer entry for the new MPAM Driver. Add myself and
> James Morse as maintainers. James created the driver and I have
> taken up the later versions of his series.
> 
> Cc: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
FWIW
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>

Btw, I think the only one I didn't tag was 33 and that's just
because I'm too lazy to check all the test cases :)

Jonathan

> ---
>  MAINTAINERS | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 46bd8e033042..ec9b2b255bef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17463,6 +17463,14 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
>  F:	drivers/video/backlight/mp3309c.c
>  
> +MPAM DRIVER
> +M:	James Morse <james.morse@arm.com>
> +M:	Ben Horgan <ben.horgan@arm.com>
> +S:	Maintained
> +F:	drivers/resctrl/mpam_*
> +F:	drivers/resctrl/test_mpam_*
> +F:	include/linux/arm_mpam.h
> +
>  MPS MP2869 DRIVER
>  M:	Wensheng Wang <wenswang@yeah.net>
>  L:	linux-hwmon@vger.kernel.org

Re: [PATCH v5 08/34] ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret() helper

[Catalin Marinas]

Hi Rafael,

On Mon, Nov 17, 2025 at 08:46:52PM +0100, Rafael J. Wysocki wrote:
> On Mon, Nov 17, 2025 at 6:01 PM Ben Horgan <ben.horgan@arm.com> wrote:
> > +static inline struct acpi_table_header *acpi_get_table_ret(char *signature, u32 instance)
> 
> Maybe call this acpi_get_table_pointer() ?

Would you have time to look at the other ACPI patches in the series? If
you are ok with them, happy to go in via the arm64 tree? Or we can put
them on a common branch if there are conflicts with your tree.

Thanks.

-- 
Catalin

Re: [PATCH v5 08/34] ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret() helper

[Rafael J. Wysocki]

Hi Catalin,

On Tue, Nov 18, 2025 at 5:13 PM Catalin Marinas <catalin.marinas@arm.com> wrote:
>
> Hi Rafael,
>
> On Mon, Nov 17, 2025 at 08:46:52PM +0100, Rafael J. Wysocki wrote:
> > On Mon, Nov 17, 2025 at 6:01 PM Ben Horgan <ben.horgan@arm.com> wrote:
> > > +static inline struct acpi_table_header *acpi_get_table_ret(char *signature, u32 instance)
> >
> > Maybe call this acpi_get_table_pointer() ?
>
> Would you have time to look at the other ACPI patches in the series? If
> you are ok with them, happy to go in via the arm64 tree? Or we can put
> them on a common branch if there are conflicts with your tree.

I think that this is the only one touching ACPI code outside the MPAM
and PPTT parsers, and the other patches in the series are fine with
me.

Please feel free to take the entire lot.

Thanks!

Re: [PATCH v5 14/34] arm_mpam: Probe hardware to find the supported partid/pmg values

[Fenghua Yu]

On 11/17/25 08:59, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> CPUs can generate traffic with a range of PARTID and PMG values,
> but each MSC may also have its own maximum size for these fields.
> Before MPAM can be used, the driver needs to probe each RIS on
> each MSC, to find the system-wide smallest value that can be used.
> The limits from requestors (e.g. CPUs) also need taking into account.
> 
> While doing this, RIS entries that firmware didn't describe are created
> under MPAM_CLASS_UNKNOWN.
> 
> This adds the low level MSC write accessors.
> 
> While we're here, implement the mpam_register_requestor() call
> for the arch code to register the CPU limits. Future callers of this
> will tell us about the SMMU and ITS.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Ben Horgan <ben.horgan@arm.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v3:
>  From Jonathan:
> Stray comma in printk
> Unnecessary braces
> ---
>   drivers/resctrl/mpam_devices.c  | 148 +++++++++++++++++++++++++++++++-
>   drivers/resctrl/mpam_internal.h |   6 ++
>   include/linux/arm_mpam.h        |  14 +++
>   3 files changed, 167 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/resctrl/mpam_devices.c b/drivers/resctrl/mpam_devices.c
> index 51284f55ae9b..ac1c770cea35 100644
> --- a/drivers/resctrl/mpam_devices.c
> +++ b/drivers/resctrl/mpam_devices.c
> @@ -6,6 +6,7 @@
>   #include <linux/acpi.h>
>   #include <linux/atomic.h>
>   #include <linux/arm_mpam.h>
> +#include <linux/bitfield.h>
>   #include <linux/cacheinfo.h>
>   #include <linux/cpu.h>
>   #include <linux/cpumask.h>
> @@ -42,6 +43,15 @@ static atomic_t mpam_num_msc;
>   static int mpam_cpuhp_state;
>   static DEFINE_MUTEX(mpam_cpuhp_state_lock);
>   
> +/*
> + * The smallest common values for any CPU or MSC in the system.
> + * Generating traffic outside this range will result in screaming interrupts.
> + */
> +u16 mpam_partid_max;
> +u8 mpam_pmg_max;
> +static bool partid_max_init, partid_max_published;
> +static DEFINE_SPINLOCK(partid_max_lock);
> +
>   /*
>    * mpam is enabled once all devices have been probed from CPU online callbacks,
>    * scheduled via this work_struct. If access to an MSC depends on a CPU that
> @@ -143,6 +153,70 @@ static inline u32 _mpam_read_partsel_reg(struct mpam_msc *msc, u16 reg)
>   
>   #define mpam_read_partsel_reg(msc, reg) _mpam_read_partsel_reg(msc, MPAMF_##reg)
>   
> +static void __mpam_write_reg(struct mpam_msc *msc, u16 reg, u32 val)
> +{
> +	WARN_ON_ONCE(reg + sizeof(u32) >= msc->mapped_hwpage_sz);

This check may cause false warning when reg range is still valid. Need 
to change to:
+	WARN_ON_ONCE(reg + sizeof(u32) > msc->mapped_hwpage_sz);

With this minor change,

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

[SNIP]

Thanks.

-Fenghua

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Fenghua Yu]

On 11/18/25 02:57, Ben Horgan wrote:
> Hi Fenghua,
> 
> On 11/18/25 04:03, Fenghua Yu wrote:
>> Hi, Ben,
>>
>> On 11/17/25 08:59, Ben Horgan wrote:
>>> In actbl2.h, acpi_pptt_cache describes the fields in the original
>>> Cache Type Structure. In PPTT table version 3 a new field was added at
>>> the
>>> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
>>> including all v1 fields it just includes this one.
>>>
>>> In lieu of this being fixed in acpica, introduce
>>> acpi_pptt_cache_v1_full to
>>> contain all the fields of the Cache Type Structure . Update the existing
>>> code to use this new struct. This simplifies the code and removes a
>>> non-standard use of ACPI_ADD_PTR.
>>>
>>> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
>>> ---
>>> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
>>> include all fields. https://github.com/acpica/acpica/pull/1059
>>>
>>> Change since v4:
>>> Use fields directly in acpi_pptt_cache_v1_full
>>> Delay the casting
>>>
>>> Changes since v3:
>>> New patch
>>> ---
>>>    drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>>>    1 file changed, 37 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
>>> index 2856254e29d7..53fde9bd8140 100644
>>> --- a/drivers/acpi/pptt.c
>>> +++ b/drivers/acpi/pptt.c
>>> @@ -21,6 +21,25 @@
>>>    #include <linux/cacheinfo.h>
>>>    #include <acpi/processor.h>
>>>    +/*
>>> + * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
>>> + * only contains the cache_id field rather than all the fields of the
>>> + * Cache Type Structure. Use this alternative structure until it is
>>> + * resolved in acpica.
>>> + */
>>> +struct acpi_pptt_cache_v1_full {
>>> +    struct acpi_subtable_header header;
>>> +    u16 reserved;
>>> +    u32 flags;
>>> +    u32 next_level_of_cache;
>>> +    u32 size;
>>> +    u32 number_of_sets;
>>> +    u8 associativity;
>>> +    u8 attributes;
>>> +    u16 line_size;
>>> +    u32 cache_id;
>>> +};
>>
>> Should "__packed" be added to this table?
> 
> Yes, I missed that.
> 

With this fixed,

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

>>
>> Should this table be defined in include/acpi/actbl2.h? Seems defining
>> the two cache tables separately in two places are not natural?
> 
> Indeed. The dificulty is that include/acpi/actbl2.h is generated from
> acpica. I propose a fix for this in the  pull request mentioned above:
> https://github.com/acpica/acpica/pull/1059 This extends
> acpi_pptt_cache_v1 to include all the fields in the new version of the
> cache type structure (not just cache_id).
> 
> One thing I could do if it looks like the acpica change will be accepted
> is to temporarily delete acpi_pptt_cache_v1 from include/acpi/actbl2.h
> and rename acpi_pptt_cache_v1_full in drivers/acpi/pptt.c to
> acpi_pptt_cache_v1. When include/acpi/actbl2.h is updated the conflict
> should be evident and the version in drivers/acpi/pptt.c can be dropped.
>   I'll keep it like it is for now though as this would be an api breaking
> change for acpica and the maintainers may prefer to handle this a
> different way.

Right. Thank you for your explanation!

-Fenghua

Re: [PATCH v5 08/34] ACPI: Define acpi_put_table cleanup handler and acpi_get_table_ret() helper

[Catalin Marinas]

On Tue, Nov 18, 2025 at 05:21:07PM +0100, Rafael J. Wysocki wrote:
> Hi Catalin,
> 
> On Tue, Nov 18, 2025 at 5:13 PM Catalin Marinas <catalin.marinas@arm.com> wrote:
> >
> > Hi Rafael,
> >
> > On Mon, Nov 17, 2025 at 08:46:52PM +0100, Rafael J. Wysocki wrote:
> > > On Mon, Nov 17, 2025 at 6:01 PM Ben Horgan <ben.horgan@arm.com> wrote:
> > > > +static inline struct acpi_table_header *acpi_get_table_ret(char *signature, u32 instance)
> > >
> > > Maybe call this acpi_get_table_pointer() ?
> >
> > Would you have time to look at the other ACPI patches in the series? If
> > you are ok with them, happy to go in via the arm64 tree? Or we can put
> > them on a common branch if there are conflicts with your tree.
> 
> I think that this is the only one touching ACPI code outside the MPAM
> and PPTT parsers, and the other patches in the series are fine with
> me.
> 
> Please feel free to take the entire lot.

Thanks!

-- 
Catalin

Re: [PATCH v5 24/34] arm_mpam: Probe and reset the rest of the features

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> MPAM supports more features than are going to be exposed to resctrl.
> For partid other than 0, the reset values of these controls isn't
> known.
> 
> Discover the rest of the features so they can be reset to avoid any
> side effects when resctrl is in use.
> 
> PARTID narrowing allows MSC/RIS to support less configuration space than
> is usable. If this feature is found on a class of device we are likely
> to use, then reduce the partid_max to make it usable. This allows us
> to map a PARTID to itself.
> 
> CC: Rohit Mathew <Rohit.Mathew@arm.com>
> CC: Zeng Heng <zengheng4@huawei.com>
> CC: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 25/34] arm_mpam: Add helpers to allocate monitors

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> MPAM's MSC support a number of monitors, each of which supports
> bandwidth counters, or cache-storage-utilisation counters. To use
> a counter, a monitor needs to be configured. Add helpers to allocate
> and free CSU or MBWU monitors.
> 
> Signed-off-by: James Morse <james.morse@arm.com>
> Reviewed-by: Ben Horgan <ben.horgan@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 01/34] ACPI / PPTT: Add a helper to fill a cpumask from a processor container

[Gavin Shan]

Hi Ben,

On 11/18/25 2:59 AM, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> The ACPI MPAM table uses the UID of a processor container specified in
> the PPTT to indicate the subset of CPUs and cache topology that can
> access each MPAM System Component (MSC).
> 
> This information is not directly useful to the kernel. The equivalent
> cpumask is needed instead.
> 
> Add a helper to find the processor container by its id, then walk
> the possible CPUs to fill a cpumask with the CPUs that have this
> processor container as a parent.
> 
> CC: Dave Martin <dave.martin@arm.com>
> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v4:
> Remove blank line
> 
> Changes since v3:
> Refer to processor hierarchy in comments (Jonathan)
> Fix indent (Jonathan)
> ---
>   drivers/acpi/pptt.c  | 84 ++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/acpi.h |  3 ++
>   2 files changed, 87 insertions(+)
> 

Since this series may need another respin, a nitpick below...

> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 54676e3d82dd..b8248c0092fe 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -817,3 +817,87 @@ int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   	return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
>   					  ACPI_PPTT_ACPI_IDENTICAL);
>   }
> +
> +/**
> + * acpi_pptt_get_child_cpus() - Find all the CPUs below a PPTT
> + * processor hierarchy node
> + *
> + * @table_hdr:		A reference to the PPTT table
> + * @parent_node:	A pointer to the processor hierarchy node in the
> + *			table_hdr
> + * @cpus:		A cpumask to fill with the CPUs below @parent_node
> + *
> + * Walks up the PPTT from every possible CPU to find if the provided
> + * @parent_node is a parent of this CPU.
> + */
> +static void acpi_pptt_get_child_cpus(struct acpi_table_header *table_hdr,
> +				     struct acpi_pptt_processor *parent_node,
> +				     cpumask_t *cpus)
> +{
> +	struct acpi_pptt_processor *cpu_node;
> +	u32 acpi_id;
> +	int cpu;
> +
> +	cpumask_clear(cpus);
> +

The CPU mask has been cleared in its only caller acpi_pptt_get_cpus_from_container(),
no need to clear it again.

> +	for_each_possible_cpu(cpu) {
> +		acpi_id = get_acpi_id_for_cpu(cpu);
> +		cpu_node = acpi_find_processor_node(table_hdr, acpi_id);
> +
> +		while (cpu_node) {
> +			if (cpu_node == parent_node) {
> +				cpumask_set_cpu(cpu, cpus);
> +				break;
> +			}
> +			cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
> +		}
> +	}
> +}
> +
> +/**
> + * acpi_pptt_get_cpus_from_container() - Populate a cpumask with all CPUs in a
> + *                                       processor container
> + * @acpi_cpu_id:	The UID of the processor container
> + * @cpus:		The resulting CPU mask
> + *
> + * Find the specified Processor Container, and fill @cpus with all the cpus
> + * below it.
> + *
> + * Not all 'Processor Hierarchy' entries in the PPTT are either a CPU
> + * or a Processor Container, they may exist purely to describe a
> + * Private resource. CPUs have to be leaves, so a Processor Container
> + * is a non-leaf that has the 'ACPI Processor ID valid' flag set.
> + */
> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
> +{
> +	struct acpi_table_header *table_hdr;
> +	struct acpi_subtable_header *entry;
> +	unsigned long table_end;
> +	u32 proc_sz;
> +
> +	cpumask_clear(cpus);
> +
> +	table_hdr = acpi_get_pptt();
> +	if (!table_hdr)
> +		return;
> +
> +	table_end = (unsigned long)table_hdr + table_hdr->length;
> +	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
> +			     sizeof(struct acpi_table_pptt));
> +	proc_sz = sizeof(struct acpi_pptt_processor);
> +	while ((unsigned long)entry + proc_sz <= table_end) {
> +		if (entry->type == ACPI_PPTT_TYPE_PROCESSOR) {
> +			struct acpi_pptt_processor *cpu_node;
> +
> +			cpu_node = (struct acpi_pptt_processor *)entry;
> +			if (cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID &&
> +			    !acpi_pptt_leaf_node(table_hdr, cpu_node) &&
> +			    cpu_node->acpi_processor_id == acpi_cpu_id) {
> +				acpi_pptt_get_child_cpus(table_hdr, cpu_node, cpus);
> +				break;
> +			}
> +		}
> +		entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
> +				     entry->length);
> +	}
> +}
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 5ff5d99f6ead..4752ebd48132 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1541,6 +1541,7 @@ int find_acpi_cpu_topology(unsigned int cpu, int level);
>   int find_acpi_cpu_topology_cluster(unsigned int cpu);
>   int find_acpi_cpu_topology_package(unsigned int cpu);
>   int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
>   #else
>   static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
>   {
> @@ -1562,6 +1563,8 @@ static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   {
>   	return -EINVAL;
>   }
> +static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
> +						     cpumask_t *cpus) { }
>   #endif
>   
>   void acpi_arch_init(void);

Thanks,
Gavin

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Gavin Shan]

On 11/18/25 2:59 AM, Ben Horgan wrote:
> In actbl2.h, acpi_pptt_cache describes the fields in the original
> Cache Type Structure. In PPTT table version 3 a new field was added at the
> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
> including all v1 fields it just includes this one.
> 
> In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
> contain all the fields of the Cache Type Structure . Update the existing
> code to use this new struct. This simplifies the code and removes a
> non-standard use of ACPI_ADD_PTR.
> 
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
> include all fields. https://github.com/acpica/acpica/pull/1059
> 
> Change since v4:
> Use fields directly in acpi_pptt_cache_v1_full
> Delay the casting
> 
> Changes since v3:
> New patch
> ---
>   drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>   1 file changed, 37 insertions(+), 10 deletions(-)
> 

With '__packed' added as pointed by Fenghua, LKTM.

Reviewed-by: Gavin Shan <gshan@redhat.com>

Re: [PATCH v5 34/34] MAINTAINERS: new entry for MPAM Driver

[Gavin Shan]

On 11/18/25 3:00 AM, Ben Horgan wrote:
> Create a maintainer entry for the new MPAM Driver. Add myself and
> James Morse as maintainers. James created the driver and I have
> taken up the later versions of his series.
> 
> Cc: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
>   MAINTAINERS | 8 ++++++++
>   1 file changed, 8 insertions(+)
> 

Reviewed-by: Gavin Shan <gshan@redhat.com>

> diff --git a/MAINTAINERS b/MAINTAINERS
> index 46bd8e033042..ec9b2b255bef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17463,6 +17463,14 @@ S:	Maintained
>   F:	Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
>   F:	drivers/video/backlight/mp3309c.c
>   
> +MPAM DRIVER
> +M:	James Morse <james.morse@arm.com>
> +M:	Ben Horgan <ben.horgan@arm.com>
> +S:	Maintained
> +F:	drivers/resctrl/mpam_*
> +F:	drivers/resctrl/test_mpam_*

Maybe to squeeze those two lines into one if another respin is needed.
LGTM in either way.

    F:   drivers/resctrl/*mpam*

> +F:	include/linux/arm_mpam.h
> +
>   MPS MP2869 DRIVER
>   M:	Wensheng Wang <wenswang@yeah.net>
>   L:	linux-hwmon@vger.kernel.org

Thanks,
Gavin

Re: [PATCH v5 15/34] arm_mpam: Add helpers for managing the locking around the mon_sel registers

[Fenghua Yu]

Hi, Ben,

On 11/17/25 08:59, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> The MSC MON_SEL register needs to be accessed from hardirq for the overflow
> interrupt, and when taking an IPI to access these registers on platforms
> where MSC are not accessible from every CPU. This makes an irqsave
> spinlock the obvious lock to protect these registers. On systems with SCMI
> or PCC mailboxes it must be able to sleep, meaning a mutex must be used.
> The SCMI or PCC platforms can't support an overflow interrupt, and
> can't access the registers from hardirq context.
> 
> Clearly these two can't exist for one MSC at the same time.
> 
> Add helpers for the MON_SEL locking. For now, use a irqsave spinlock and
> only support 'real' MMIO platforms.
> 
> In the future this lock will be split in two allowing SCMI/PCC platforms
> to take a mutex. Because there are contexts where the SCMI/PCC platforms
> can't make an access, mpam_mon_sel_lock() needs to be able to fail. Do
> this now, so that all the error handling on these paths is present. This
> allows the relevant paths to fail if they are needed on a platform where
> this isn't possible, instead of having to make explicit checks of the
> interface type.
> 
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com

[SNIP]

> diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/mpam_internal.h
> index 768a58a3ab27..b62ee55e1ed5 100644
> --- a/drivers/resctrl/mpam_internal.h
> +++ b/drivers/resctrl/mpam_internal.h

[SNIP]

> +/* Returning false here means accesses to mon_sel must fail and report an error. */
> +static inline bool __must_check mpam_mon_sel_lock(struct mpam_msc *msc)
> +{
> +	WARN_ON_ONCE(msc->iface != MPAM_IFACE_MMIO);
> +
> +	raw_spin_lock_irqsave(&msc->_mon_sel_lock, msc->_mon_sel_flags);
> +	return true;
> +}

This helper always returns true, never false. And this may cause issue 
later.

On the bottom line, this causes confusion in the comment and when later 
its return value is always checked by callers.

It's better to improve this helper?

Option 1: warn and return false when ris->iface is not MMIO. No changes 
in other patches which call the helper. Seems this is a better fix.
Option 2: warn on non MMIO iface but no return value. Other patches need 
to be changed when calling the helper.

Thanks.

-Fenghua

Re: [PATCH v5 28/34] arm_mpam: Consider overflow in bandwidth counter state

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> Use the overflow status bit to track overflow on each bandwidth counter
> read and add the counter size to the correction when overflow is detected.
> 
> This assumes that only a single overflow has occurred since the last read
> of the counter. Overflow interrupts, on hardware that supports them could
> be used to remove this limitation.
> 
> Cc: Zeng Heng <zengheng4@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Zeng Heng <zengheng4@huawei.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 27/34] arm_mpam: Track bandwidth counter state for power management

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> Bandwidth counters need to run continuously to correctly reflect the
> bandwidth.
> 
> Save the counter state when the hardware is reset due to CPU hotplug.
> Add struct mbwu_state to track the bandwidth counter. Support for
> tracking overflow with the same structure will be added in a
> subsequent commit.
> 
> Cc: Zeng Heng <zengheng4@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Zeng Heng <zengheng4@huawei.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 02/34] ACPI / PPTT: Stop acpi_count_levels() expecting callers to clear levels

[Hanjun Guo]

On 2025/11/18 0:59, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> In acpi_count_levels(), the initial value of *levels passed by the
> caller is really an implementation detail of acpi_count_levels(), so it
> is unreasonable to expect the callers of this function to know what to
> pass in for this parameter.  The only sensible initial value is 0,
> which is what the only upstream caller (acpi_get_cache_info()) passes.
> 
> Use a local variable for the starting cache level in acpi_count_levels(),
> and pass the result back to the caller via the function return value.
> 
> Get rid of the levels parameter, which has no remaining purpose.
> 
> Fix acpi_get_cache_info() to match.
> 
> Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v3:
> s/starting_level/current_level/ (Jonathan)
> ---
>   drivers/acpi/pptt.c | 20 ++++++++++++--------
>   1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index b8248c0092fe..2856254e29d7 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -177,14 +177,14 @@ acpi_find_cache_level(struct acpi_table_header *table_hdr,
>   }
>   
>   /**
> - * acpi_count_levels() - Given a PPTT table, and a CPU node, count the cache
> - * levels and split cache levels (data/instruction).
> + * acpi_count_levels() - Given a PPTT table, and a CPU node, count the
> + * total number of levels and split cache levels (data/instruction).
>    * @table_hdr: Pointer to the head of the PPTT table
>    * @cpu_node: processor node we wish to count caches for
> - * @levels: Number of levels if success.
>    * @split_levels:	Number of split cache levels (data/instruction) if
>    *			success. Can by NULL.
>    *
> + * Return: number of levels.
>    * Given a processor node containing a processing unit, walk into it and count
>    * how many levels exist solely for it, and then walk up each level until we hit
>    * the root node (ignore the package level because it may be possible to have
> @@ -192,14 +192,18 @@ acpi_find_cache_level(struct acpi_table_header *table_hdr,
>    * split cache levels (data/instruction) that exist at each level on the way
>    * up.
>    */
> -static void acpi_count_levels(struct acpi_table_header *table_hdr,
> -			      struct acpi_pptt_processor *cpu_node,
> -			      unsigned int *levels, unsigned int *split_levels)
> +static int acpi_count_levels(struct acpi_table_header *table_hdr,
> +			     struct acpi_pptt_processor *cpu_node,
> +			     unsigned int *split_levels)
>   {
> +	int current_level = 0;
> +
>   	do {
> -		acpi_find_cache_level(table_hdr, cpu_node, levels, split_levels, 0, 0);
> +		acpi_find_cache_level(table_hdr, cpu_node, &current_level, split_levels, 0, 0);
>   		cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
>   	} while (cpu_node);
> +
> +	return current_level;
>   }
>   
>   /**
> @@ -645,7 +649,7 @@ int acpi_get_cache_info(unsigned int cpu, unsigned int *levels,
>   	if (!cpu_node)
>   		return -ENOENT;
>   
> -	acpi_count_levels(table, cpu_node, levels, split_levels);
> +	*levels = acpi_count_levels(table, cpu_node, split_levels);
>   
>   	pr_debug("Cache Setup: last_level=%d split_levels=%d\n",
>   		 *levels, split_levels ? *split_levels : -1);
> 

Reviewed-by: Hanjun Guo <guohanjun@huawei.com>

Thanks
Hanjun

Re: [PATCH v5 23/34] arm_mpam: Allow configuration to be applied and restored during cpu online

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> When CPUs come online the MSC's original configuration should be restored.
> 
> Add struct mpam_config to hold the configuration. For each component, this
> has a bitmap of features that have been changed from the reset values. The
> mpam_config is also used on RIS reset where all bits are set to ensure all
> features are reset.
> 
> Once the maximum partid is known, allocate a configuration array for each
> component, and reprogram each RIS configuration from this.
> 
> CC: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Cc: Shaopeng Tan (Fujitsu) tan.shaopeng@fujitsu.com
> Cc: Peter Newman peternewman@google.com
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 29/34] arm_mpam: Probe for long/lwd mbwu counters

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: Rohit Mathew <rohit.mathew@arm.com>
> 
> mpam v0.1 and versions above v1.0 support optional long counter for
> memory bandwidth monitoring. The MPAMF_MBWUMON_IDR register has fields
> indicating support for long counters.
> 
> Probe these feature bits.
> 
> The mpam_feat_msmon_mbwu feature is used to indicate that bandwidth
> monitors are supported, instead of muddling this with which size of
> bandwidth monitors, add an explicit 31 bit counter feature.
> 
> Signed-off-by: Rohit Mathew <rohit.mathew@arm.com>
> [ morse: Added 31bit counter feature to simplify later logic ]
> Signed-off-by: James Morse <james.morse@arm.com>
> Reviewed-by: Ben Horgan <ben.horgan@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 26/34] arm_mpam: Add mpam_msmon_read() to read monitor value

[Fenghua Yu]

On 11/17/25 09:00, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> Reading a monitor involves configuring what you want to monitor, and
> reading the value. Components made up of multiple MSC may need values
> from each MSC. MSCs may take time to configure, returning 'not ready'.
> The maximum 'not ready' time should have been provided by firmware.
> 
> Add mpam_msmon_read() to hide all this. If (one of) the MSC returns
> not ready, then wait the full timeout value before trying again.
> 
> CC: Shanker Donthineni <sdonthineni@nvidia.com>
> Cc: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>

Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>

Thanks.

-Fenghua

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Hanjun Guo]

On 2025/11/18 0:59, Ben Horgan wrote:
> In actbl2.h, acpi_pptt_cache describes the fields in the original
> Cache Type Structure. In PPTT table version 3 a new field was added at the
> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
> including all v1 fields it just includes this one.
> 
> In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
> contain all the fields of the Cache Type Structure . Update the existing
> code to use this new struct. This simplifies the code and removes a
> non-standard use of ACPI_ADD_PTR.
> 
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
> include all fields. https://github.com/acpica/acpica/pull/1059
> 
> Change since v4:
> Use fields directly in acpi_pptt_cache_v1_full
> Delay the casting
> 
> Changes since v3:
> New patch
> ---
>   drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>   1 file changed, 37 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 2856254e29d7..53fde9bd8140 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -21,6 +21,25 @@
>   #include <linux/cacheinfo.h>
>   #include <acpi/processor.h>
>   
> +/*
> + * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
> + * only contains the cache_id field rather than all the fields of the
> + * Cache Type Structure. Use this alternative structure until it is
> + * resolved in acpica.
> + */
> +struct acpi_pptt_cache_v1_full {
> +	struct acpi_subtable_header header;
> +	u16 reserved;
> +	u32 flags;
> +	u32 next_level_of_cache;
> +	u32 size;
> +	u32 number_of_sets;
> +	u8 associativity;
> +	u8 attributes;
> +	u16 line_size;
> +	u32 cache_id;
> +};

I'm fine with removing this after acpica changes being accepted.

Reviewed-by: Hanjun Guo <guohanjun@huawei.com>

Thanks
Hanjun

Re: [PATCH v5 01/34] ACPI / PPTT: Add a helper to fill a cpumask from a processor container

[Ben Horgan]

Hi Gavin,

On 11/19/25 03:35, Gavin Shan wrote:
> Hi Ben,
> 
> On 11/18/25 2:59 AM, Ben Horgan wrote:
>> From: James Morse <james.morse@arm.com>
>>
>> The ACPI MPAM table uses the UID of a processor container specified in
>> the PPTT to indicate the subset of CPUs and cache topology that can
>> access each MPAM System Component (MSC).
>>
>> This information is not directly useful to the kernel. The equivalent
>> cpumask is needed instead.
>>
>> Add a helper to find the processor container by its id, then walk
>> the possible CPUs to fill a cpumask with the CPUs that have this
>> processor container as a parent.
>>
>> CC: Dave Martin <dave.martin@arm.com>
>> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
>> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
>> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
>> Reviewed-by: Gavin Shan <gshan@redhat.com>
>> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
>> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> Tested-by: Peter Newman <peternewman@google.com>
>> Tested-by: Carl Worth <carl@os.amperecomputing.com>
>> Tested-by: Gavin Shan <gshan@redhat.com>
>> Tested-by: Zeng Heng <zengheng4@huawei.com>
>> Signed-off-by: James Morse <james.morse@arm.com>
>> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
>> ---
>> Changes since v4:
>> Remove blank line
>>
>> Changes since v3:
>> Refer to processor hierarchy in comments (Jonathan)
>> Fix indent (Jonathan)
>> ---
>>   drivers/acpi/pptt.c  | 84 ++++++++++++++++++++++++++++++++++++++++++++
>>   include/linux/acpi.h |  3 ++
>>   2 files changed, 87 insertions(+)
>>
> 
> Since this series may need another respin, a nitpick below...
> 
>> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
>> index 54676e3d82dd..b8248c0092fe 100644
>> --- a/drivers/acpi/pptt.c
>> +++ b/drivers/acpi/pptt.c
>> @@ -817,3 +817,87 @@ int find_acpi_cpu_topology_hetero_id(unsigned int
>> cpu)
>>       return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
>>                         ACPI_PPTT_ACPI_IDENTICAL);
>>   }
>> +
>> +/**
>> + * acpi_pptt_get_child_cpus() - Find all the CPUs below a PPTT
>> + * processor hierarchy node
>> + *
>> + * @table_hdr:        A reference to the PPTT table
>> + * @parent_node:    A pointer to the processor hierarchy node in the
>> + *            table_hdr
>> + * @cpus:        A cpumask to fill with the CPUs below @parent_node
>> + *
>> + * Walks up the PPTT from every possible CPU to find if the provided
>> + * @parent_node is a parent of this CPU.
>> + */
>> +static void acpi_pptt_get_child_cpus(struct acpi_table_header
>> *table_hdr,
>> +                     struct acpi_pptt_processor *parent_node,
>> +                     cpumask_t *cpus)
>> +{
>> +    struct acpi_pptt_processor *cpu_node;
>> +    u32 acpi_id;
>> +    int cpu;
>> +
>> +    cpumask_clear(cpus);
>> +
> 
> The CPU mask has been cleared in its only caller
> acpi_pptt_get_cpus_from_container(),
> no need to clear it again.

I'd rather not change this as it adds extra constraints on the caller
which aren't necessarily expected.

> 
>> +    for_each_possible_cpu(cpu) {
>> +        acpi_id = get_acpi_id_for_cpu(cpu);
>> +        cpu_node = acpi_find_processor_node(table_hdr, acpi_id);
>> +
>> +        while (cpu_node) {
>> +            if (cpu_node == parent_node) {
>> +                cpumask_set_cpu(cpu, cpus);
>> +                break;
>> +            }
>> +            cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
>> +        }
>> +    }
>> +}
>> +
>> +/**
>> + * acpi_pptt_get_cpus_from_container() - Populate a cpumask with all
>> CPUs in a
>> + *                                       processor container
>> + * @acpi_cpu_id:    The UID of the processor container
>> + * @cpus:        The resulting CPU mask
>> + *
>> + * Find the specified Processor Container, and fill @cpus with all
>> the cpus
>> + * below it.
>> + *
>> + * Not all 'Processor Hierarchy' entries in the PPTT are either a CPU
>> + * or a Processor Container, they may exist purely to describe a
>> + * Private resource. CPUs have to be leaves, so a Processor Container
>> + * is a non-leaf that has the 'ACPI Processor ID valid' flag set.
>> + */
>> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
>> +{
>> +    struct acpi_table_header *table_hdr;
>> +    struct acpi_subtable_header *entry;
>> +    unsigned long table_end;
>> +    u32 proc_sz;
>> +
>> +    cpumask_clear(cpus);
>> +
>> +    table_hdr = acpi_get_pptt();
>> +    if (!table_hdr)
>> +        return;
>> +
>> +    table_end = (unsigned long)table_hdr + table_hdr->length;
>> +    entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
>> +                 sizeof(struct acpi_table_pptt));
>> +    proc_sz = sizeof(struct acpi_pptt_processor);
>> +    while ((unsigned long)entry + proc_sz <= table_end) {
>> +        if (entry->type == ACPI_PPTT_TYPE_PROCESSOR) {
>> +            struct acpi_pptt_processor *cpu_node;
>> +
>> +            cpu_node = (struct acpi_pptt_processor *)entry;
>> +            if (cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID &&
>> +                !acpi_pptt_leaf_node(table_hdr, cpu_node) &&
>> +                cpu_node->acpi_processor_id == acpi_cpu_id) {
>> +                acpi_pptt_get_child_cpus(table_hdr, cpu_node, cpus);
>> +                break;
>> +            }
>> +        }
>> +        entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
>> +                     entry->length);
>> +    }
>> +}
>> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
>> index 5ff5d99f6ead..4752ebd48132 100644
>> --- a/include/linux/acpi.h
>> +++ b/include/linux/acpi.h
>> @@ -1541,6 +1541,7 @@ int find_acpi_cpu_topology(unsigned int cpu, int
>> level);
>>   int find_acpi_cpu_topology_cluster(unsigned int cpu);
>>   int find_acpi_cpu_topology_package(unsigned int cpu);
>>   int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
>> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t
>> *cpus);
>>   #else
>>   static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
>>   {
>> @@ -1562,6 +1563,8 @@ static inline int
>> find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>>   {
>>       return -EINVAL;
>>   }
>> +static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
>> +                             cpumask_t *cpus) { }
>>   #endif
>>     void acpi_arch_init(void);
> 
> Thanks,
> Gavin
> 

Thanks,

Ben

Re: [PATCH v5 15/34] arm_mpam: Add helpers for managing the locking around the mon_sel registers

[Ben Horgan]

Hi Fenghua,

On 11/19/25 04:13, Fenghua Yu wrote:
> Hi, Ben,
> 
> On 11/17/25 08:59, Ben Horgan wrote:
>> From: James Morse <james.morse@arm.com>
>>
>> The MSC MON_SEL register needs to be accessed from hardirq for the
>> overflow
>> interrupt, and when taking an IPI to access these registers on platforms
>> where MSC are not accessible from every CPU. This makes an irqsave
>> spinlock the obvious lock to protect these registers. On systems with
>> SCMI
>> or PCC mailboxes it must be able to sleep, meaning a mutex must be used.
>> The SCMI or PCC platforms can't support an overflow interrupt, and
>> can't access the registers from hardirq context.
>>
>> Clearly these two can't exist for one MSC at the same time.
>>
>> Add helpers for the MON_SEL locking. For now, use a irqsave spinlock and
>> only support 'real' MMIO platforms.
>>
>> In the future this lock will be split in two allowing SCMI/PCC platforms
>> to take a mutex. Because there are contexts where the SCMI/PCC platforms
>> can't make an access, mpam_mon_sel_lock() needs to be able to fail. Do
>> this now, so that all the error handling on these paths is present. This
>> allows the relevant paths to fail if they are needed on a platform where
>> this isn't possible, instead of having to make explicit checks of the
>> interface type.
>>
>> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
>> Reviewed-by: Gavin Shan <gshan@redhat.com>
>> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
>> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
>> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
>> Tested-by: Peter Newman <peternewman@google.com>
>> Tested-by: Carl Worth <carl@os.amperecomputing.com>
>> Tested-by: Gavin Shan <gshan@redhat.com>
>> Tested-by: Zeng Heng <zengheng4@huawei.com>
>> Signed-off-by: James Morse <james.morse@arm.com>
>> Signed-off-by: Ben Horgan <ben.horgan@arm.com
> 
> [SNIP]
> 
>> diff --git a/drivers/resctrl/mpam_internal.h b/drivers/resctrl/
>> mpam_internal.h
>> index 768a58a3ab27..b62ee55e1ed5 100644
>> --- a/drivers/resctrl/mpam_internal.h
>> +++ b/drivers/resctrl/mpam_internal.h
> 
> [SNIP]
> 
>> +/* Returning false here means accesses to mon_sel must fail and
>> report an error. */
>> +static inline bool __must_check mpam_mon_sel_lock(struct mpam_msc *msc)
>> +{
>> +    WARN_ON_ONCE(msc->iface != MPAM_IFACE_MMIO);
>> +
>> +    raw_spin_lock_irqsave(&msc->_mon_sel_lock, msc->_mon_sel_flags);
>> +    return true;
>> +}
> 
> This helper always returns true, never false. And this may cause issue
> later.
> 
> On the bottom line, this causes confusion in the comment and when later
> its return value is always checked by callers.
> 
> It's better to improve this helper?
> 
> Option 1: warn and return false when ris->iface is not MMIO. No changes
> in other patches which call the helper. Seems this is a better fix.

Ok. The return value checking is intentional so that the locking for the
firmware backed interface can be easily re-instated to the driver later.
I'll return false when ris->iface is not MMIO but we won't get there as
the probe will have already failed.

> Option 2: warn on non MMIO iface but no return value. Other patches need
> to be changed when calling the helper.
> 
> Thanks.
> 
> -Fenghua

-- 
Thanks,

Ben

Re: [PATCH v5 01/34] ACPI / PPTT: Add a helper to fill a cpumask from a processor container

[Jeremy Linton]

On 11/17/25 10:59 AM, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> The ACPI MPAM table uses the UID of a processor container specified in
> the PPTT to indicate the subset of CPUs and cache topology that can
> access each MPAM System Component (MSC).
> 
> This information is not directly useful to the kernel. The equivalent
> cpumask is needed instead.
> 
> Add a helper to find the processor container by its id, then walk
> the possible CPUs to fill a cpumask with the CPUs that have this
> processor container as a parent.

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>>
> CC: Dave Martin <dave.martin@arm.com>
> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v4:
> Remove blank line
> 
> Changes since v3:
> Refer to processor hierarchy in comments (Jonathan)
> Fix indent (Jonathan)
> ---
>   drivers/acpi/pptt.c  | 84 ++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/acpi.h |  3 ++
>   2 files changed, 87 insertions(+)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 54676e3d82dd..b8248c0092fe 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -817,3 +817,87 @@ int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   	return find_acpi_cpu_topology_tag(cpu, PPTT_ABORT_PACKAGE,
>   					  ACPI_PPTT_ACPI_IDENTICAL);
>   }
> +
> +/**
> + * acpi_pptt_get_child_cpus() - Find all the CPUs below a PPTT
> + * processor hierarchy node
> + *
> + * @table_hdr:		A reference to the PPTT table
> + * @parent_node:	A pointer to the processor hierarchy node in the
> + *			table_hdr
> + * @cpus:		A cpumask to fill with the CPUs below @parent_node
> + *
> + * Walks up the PPTT from every possible CPU to find if the provided
> + * @parent_node is a parent of this CPU.
> + */
> +static void acpi_pptt_get_child_cpus(struct acpi_table_header *table_hdr,
> +				     struct acpi_pptt_processor *parent_node,
> +				     cpumask_t *cpus)
> +{
> +	struct acpi_pptt_processor *cpu_node;
> +	u32 acpi_id;
> +	int cpu;
> +
> +	cpumask_clear(cpus);
> +
> +	for_each_possible_cpu(cpu) {
> +		acpi_id = get_acpi_id_for_cpu(cpu);
> +		cpu_node = acpi_find_processor_node(table_hdr, acpi_id);
> +
> +		while (cpu_node) {
> +			if (cpu_node == parent_node) {
> +				cpumask_set_cpu(cpu, cpus);
> +				break;
> +			}
> +			cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
> +		}
> +	}
> +}
> +
> +/**
> + * acpi_pptt_get_cpus_from_container() - Populate a cpumask with all CPUs in a
> + *                                       processor container
> + * @acpi_cpu_id:	The UID of the processor container
> + * @cpus:		The resulting CPU mask
> + *
> + * Find the specified Processor Container, and fill @cpus with all the cpus
> + * below it.
> + *
> + * Not all 'Processor Hierarchy' entries in the PPTT are either a CPU
> + * or a Processor Container, they may exist purely to describe a
> + * Private resource. CPUs have to be leaves, so a Processor Container
> + * is a non-leaf that has the 'ACPI Processor ID valid' flag set.
> + */
> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
> +{
> +	struct acpi_table_header *table_hdr;
> +	struct acpi_subtable_header *entry;
> +	unsigned long table_end;
> +	u32 proc_sz;
> +
> +	cpumask_clear(cpus);
> +
> +	table_hdr = acpi_get_pptt();
> +	if (!table_hdr)
> +		return;
> +
> +	table_end = (unsigned long)table_hdr + table_hdr->length;
> +	entry = ACPI_ADD_PTR(struct acpi_subtable_header, table_hdr,
> +			     sizeof(struct acpi_table_pptt));
> +	proc_sz = sizeof(struct acpi_pptt_processor);
> +	while ((unsigned long)entry + proc_sz <= table_end) {
> +		if (entry->type == ACPI_PPTT_TYPE_PROCESSOR) {
> +			struct acpi_pptt_processor *cpu_node;
> +
> +			cpu_node = (struct acpi_pptt_processor *)entry;
> +			if (cpu_node->flags & ACPI_PPTT_ACPI_PROCESSOR_ID_VALID &&
> +			    !acpi_pptt_leaf_node(table_hdr, cpu_node) &&
> +			    cpu_node->acpi_processor_id == acpi_cpu_id) {
> +				acpi_pptt_get_child_cpus(table_hdr, cpu_node, cpus);
> +				break;
> +			}
> +		}
> +		entry = ACPI_ADD_PTR(struct acpi_subtable_header, entry,
> +				     entry->length);
> +	}
> +}
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 5ff5d99f6ead..4752ebd48132 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1541,6 +1541,7 @@ int find_acpi_cpu_topology(unsigned int cpu, int level);
>   int find_acpi_cpu_topology_cluster(unsigned int cpu);
>   int find_acpi_cpu_topology_package(unsigned int cpu);
>   int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
> +void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
>   #else
>   static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
>   {
> @@ -1562,6 +1563,8 @@ static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   {
>   	return -EINVAL;
>   }
> +static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
> +						     cpumask_t *cpus) { }
>   #endif
>   
>   void acpi_arch_init(void);

Re: [PATCH v5 02/34] ACPI / PPTT: Stop acpi_count_levels() expecting callers to clear levels

[Jeremy Linton]

On 11/17/25 10:59 AM, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> In acpi_count_levels(), the initial value of *levels passed by the
> caller is really an implementation detail of acpi_count_levels(), so it
> is unreasonable to expect the callers of this function to know what to
> pass in for this parameter.  The only sensible initial value is 0,
> which is what the only upstream caller (acpi_get_cache_info()) passes.
> 
> Use a local variable for the starting cache level in acpi_count_levels(),
> and pass the result back to the caller via the function return value.
> 
> Get rid of the levels parameter, which has no remaining purpose.
> 
> Fix acpi_get_cache_info() to match.

Sure,

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>>
> Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
> Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Peter Newman <peternewman@google.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v3:
> s/starting_level/current_level/ (Jonathan)
> ---
>   drivers/acpi/pptt.c | 20 ++++++++++++--------
>   1 file changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index b8248c0092fe..2856254e29d7 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -177,14 +177,14 @@ acpi_find_cache_level(struct acpi_table_header *table_hdr,
>   }
>   
>   /**
> - * acpi_count_levels() - Given a PPTT table, and a CPU node, count the cache
> - * levels and split cache levels (data/instruction).
> + * acpi_count_levels() - Given a PPTT table, and a CPU node, count the
> + * total number of levels and split cache levels (data/instruction).
>    * @table_hdr: Pointer to the head of the PPTT table
>    * @cpu_node: processor node we wish to count caches for
> - * @levels: Number of levels if success.
>    * @split_levels:	Number of split cache levels (data/instruction) if
>    *			success. Can by NULL.
>    *
> + * Return: number of levels.
>    * Given a processor node containing a processing unit, walk into it and count
>    * how many levels exist solely for it, and then walk up each level until we hit
>    * the root node (ignore the package level because it may be possible to have
> @@ -192,14 +192,18 @@ acpi_find_cache_level(struct acpi_table_header *table_hdr,
>    * split cache levels (data/instruction) that exist at each level on the way
>    * up.
>    */
> -static void acpi_count_levels(struct acpi_table_header *table_hdr,
> -			      struct acpi_pptt_processor *cpu_node,
> -			      unsigned int *levels, unsigned int *split_levels)
> +static int acpi_count_levels(struct acpi_table_header *table_hdr,
> +			     struct acpi_pptt_processor *cpu_node,
> +			     unsigned int *split_levels)
>   {
> +	int current_level = 0;
> +
>   	do {
> -		acpi_find_cache_level(table_hdr, cpu_node, levels, split_levels, 0, 0);
> +		acpi_find_cache_level(table_hdr, cpu_node, &current_level, split_levels, 0, 0);
>   		cpu_node = fetch_pptt_node(table_hdr, cpu_node->parent);
>   	} while (cpu_node);
> +
> +	return current_level;
>   }
>   
>   /**
> @@ -645,7 +649,7 @@ int acpi_get_cache_info(unsigned int cpu, unsigned int *levels,
>   	if (!cpu_node)
>   		return -ENOENT;
>   
> -	acpi_count_levels(table, cpu_node, levels, split_levels);
> +	*levels = acpi_count_levels(table, cpu_node, split_levels);
>   
>   	pr_debug("Cache Setup: last_level=%d split_levels=%d\n",
>   		 *levels, split_levels ? *split_levels : -1);

Re: [PATCH v5 03/34] ACPI / PPTT: Add acpi_pptt_cache_v1_full to use pptt cache as one structure

[Jeremy Linton]

On 11/17/25 10:59 AM, Ben Horgan wrote:
> In actbl2.h, acpi_pptt_cache describes the fields in the original
> Cache Type Structure. In PPTT table version 3 a new field was added at the
> end, cache_id. This is described in acpi_pptt_cache_v1 but rather than
> including all v1 fields it just includes this one.
> 
> In lieu of this being fixed in acpica, introduce acpi_pptt_cache_v1_full to
> contain all the fields of the Cache Type Structure . Update the existing
> code to use this new struct. This simplifies the code and removes a
> non-standard use of ACPI_ADD_PTR.

To me, reading the code its a lot clearer that there is a version 
difference in the subtable this way.

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>

> 
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> I have opened a pull request to acpica to update acpi_pptt_cache_v1 to
> include all fields. https://github.com/acpica/acpica/pull/1059
> 
> Change since v4:
> Use fields directly in acpi_pptt_cache_v1_full
> Delay the casting
> 
> Changes since v3:
> New patch
> ---
>   drivers/acpi/pptt.c | 47 +++++++++++++++++++++++++++++++++++----------
>   1 file changed, 37 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 2856254e29d7..53fde9bd8140 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -21,6 +21,25 @@
>   #include <linux/cacheinfo.h>
>   #include <acpi/processor.h>
>   
> +/*
> + * The acpi_pptt_cache_v1 in actbl2.h, which is imported from acpica,
> + * only contains the cache_id field rather than all the fields of the
> + * Cache Type Structure. Use this alternative structure until it is
> + * resolved in acpica.
> + */
> +struct acpi_pptt_cache_v1_full {
> +	struct acpi_subtable_header header;
> +	u16 reserved;
> +	u32 flags;
> +	u32 next_level_of_cache;
> +	u32 size;
> +	u32 number_of_sets;
> +	u8 associativity;
> +	u8 attributes;
> +	u16 line_size;
> +	u32 cache_id;
> +};
> +
>   static struct acpi_subtable_header *fetch_pptt_subtable(struct acpi_table_header *table_hdr,
>   							u32 pptt_ref)
>   {
> @@ -56,6 +75,18 @@ static struct acpi_pptt_cache *fetch_pptt_cache(struct acpi_table_header *table_
>   	return (struct acpi_pptt_cache *)fetch_pptt_subtable(table_hdr, pptt_ref);
>   }
>   
> +static struct acpi_pptt_cache_v1_full *upgrade_pptt_cache(struct acpi_pptt_cache *cache)
> +{
> +	if (cache->header.length < sizeof(struct acpi_pptt_cache_v1_full))
> +		return NULL;
> +
> +	/* No use for v1 if the only additional field is invalid */
> +	if (!(cache->flags & ACPI_PPTT_CACHE_ID_VALID))
> +		return NULL;
> +
> +	return (struct acpi_pptt_cache_v1_full *)cache;
> +}
> +
>   static struct acpi_subtable_header *acpi_get_pptt_resource(struct acpi_table_header *table_hdr,
>   							   struct acpi_pptt_processor *node,
>   							   int resource)
> @@ -111,7 +142,7 @@ static unsigned int acpi_pptt_walk_cache(struct acpi_table_header *table_hdr,
>   	if (res->type != ACPI_PPTT_TYPE_CACHE)
>   		return 0;
>   
> -	cache = (struct acpi_pptt_cache *) res;
> +	cache = (struct acpi_pptt_cache *)res;
>   	while (cache) {
>   		local_level++;
>   
> @@ -355,7 +386,6 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
>    * @this_leaf: Kernel cache info structure being updated
>    * @found_cache: The PPTT node describing this cache instance
>    * @cpu_node: A unique reference to describe this cache instance
> - * @revision: The revision of the PPTT table
>    *
>    * The ACPI spec implies that the fields in the cache structures are used to
>    * extend and correct the information probed from the hardware. Lets only
> @@ -365,10 +395,9 @@ static struct acpi_pptt_cache *acpi_find_cache_node(struct acpi_table_header *ta
>    */
>   static void update_cache_properties(struct cacheinfo *this_leaf,
>   				    struct acpi_pptt_cache *found_cache,
> -				    struct acpi_pptt_processor *cpu_node,
> -				    u8 revision)
> +				    struct acpi_pptt_processor *cpu_node)
>   {
> -	struct acpi_pptt_cache_v1* found_cache_v1;
> +	struct acpi_pptt_cache_v1_full *found_cache_v1;
>   
>   	this_leaf->fw_token = cpu_node;
>   	if (found_cache->flags & ACPI_PPTT_SIZE_PROPERTY_VALID)
> @@ -418,9 +447,8 @@ static void update_cache_properties(struct cacheinfo *this_leaf,
>   	    found_cache->flags & ACPI_PPTT_CACHE_TYPE_VALID)
>   		this_leaf->type = CACHE_TYPE_UNIFIED;
>   
> -	if (revision >= 3 && (found_cache->flags & ACPI_PPTT_CACHE_ID_VALID)) {
> -		found_cache_v1 = ACPI_ADD_PTR(struct acpi_pptt_cache_v1,
> -	                                      found_cache, sizeof(struct acpi_pptt_cache));
> +	found_cache_v1 =  upgrade_pptt_cache(found_cache);
> +	if (found_cache_v1) {
>   		this_leaf->id = found_cache_v1->cache_id;
>   		this_leaf->attributes |= CACHE_ID;
>   	}
> @@ -445,8 +473,7 @@ static void cache_setup_acpi_cpu(struct acpi_table_header *table,
>   		pr_debug("found = %p %p\n", found_cache, cpu_node);
>   		if (found_cache)
>   			update_cache_properties(this_leaf, found_cache,
> -						ACPI_TO_POINTER(ACPI_PTR_DIFF(cpu_node, table)),
> -						table->revision);
> +						ACPI_TO_POINTER(ACPI_PTR_DIFF(cpu_node, table)));
>   
>   		index++;
>   	}

Re: [PATCH v5 04/34] ACPI / PPTT: Find cache level by cache-id

[Jeremy Linton]

On 11/17/25 10:59 AM, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> The MPAM table identifies caches by id. The MPAM driver also wants to know
> the cache level to determine if the platform is of the shape that can be
> managed via resctrl. Cacheinfo has this information, but only for CPUs that
> are online.
> 
> Waiting for all CPUs to come online is a problem for platforms where
> CPUs are brought online late by user-space.
> 
> Add a helper that walks every possible cache, until it finds the one
> identified by cache-id, then return the level.

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>

> 
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> ---
> Changes since v4:
> Initialise acpi_cpu_id at declaration
> Convert a for loop to do/while (Jonathan)
> Use new version of acpi_pptt_cache_v1_full
> 
> Changes since v3:
> Tags dropped due to rework
> Fallout/simplification from adding acpi_pptt_cache_v1_full
> Look for each cache type before incrementing level
> ---
>   drivers/acpi/pptt.c  | 66 ++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/acpi.h |  5 ++++
>   2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 53fde9bd8140..5b1e9e410204 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -932,3 +932,69 @@ void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus)
>   				     entry->length);
>   	}
>   }
> +
> +/**
> + * find_acpi_cache_level_from_id() - Get the level of the specified cache
> + * @cache_id: The id field of the cache
> + *
> + * Determine the level relative to any CPU for the cache identified by
> + * cache_id. This allows the property to be found even if the CPUs are offline.
> + *
> + * The returned level can be used to group caches that are peers.
> + *
> + * The PPTT table must be rev 3 or later.
> + *
> + * If one CPU's L2 is shared with another CPU as L3, this function will return
> + * an unpredictable value.
> + *
> + * Return: -ENOENT if the PPTT doesn't exist, the revision isn't supported or
> + * the cache cannot be found.
> + * Otherwise returns a value which represents the level of the specified cache.
> + */
> +int find_acpi_cache_level_from_id(u32 cache_id)
> +{
> +	int cpu;
> +	struct acpi_table_header *table;
> +
> +	table = acpi_get_pptt();
> +	if (!table)
> +		return -ENOENT;
> +
> +	if (table->revision < 3)
> +		return -ENOENT;
> +
> +	for_each_possible_cpu(cpu) {
> +		bool empty;
> +		int level = 1;
> +		u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
> +		struct acpi_pptt_cache *cache;
> +		struct acpi_pptt_processor *cpu_node;
> +
> +		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
> +		if (!cpu_node)
> +			continue;
> +
> +		do {
> +			int cache_type[] = {CACHE_TYPE_INST, CACHE_TYPE_DATA, CACHE_TYPE_UNIFIED};
> +
> +			empty = true;
> +			for (int i = 0; i < ARRAY_SIZE(cache_type); i++) {
> +				struct acpi_pptt_cache_v1_full *cache_v1;
> +
> +				cache = acpi_find_cache_node(table, acpi_cpu_id, cache_type[i],
> +							     level, &cpu_node);
> +				if (!cache)
> +					continue;
> +
> +				empty = false;
> +
> +				cache_v1 = upgrade_pptt_cache(cache);
> +				if (cache_v1 && cache_v1->cache_id == cache_id)
> +					return level;
> +			}
> +			level++;
> +		} while (!empty);
> +	}
> +
> +	return -ENOENT;
> +}
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 4752ebd48132..be074bdfd4d1 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1542,6 +1542,7 @@ int find_acpi_cpu_topology_cluster(unsigned int cpu);
>   int find_acpi_cpu_topology_package(unsigned int cpu);
>   int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
>   void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
> +int find_acpi_cache_level_from_id(u32 cache_id);
>   #else
>   static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
>   {
> @@ -1565,6 +1566,10 @@ static inline int find_acpi_cpu_topology_hetero_id(unsigned int cpu)
>   }
>   static inline void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id,
>   						     cpumask_t *cpus) { }
> +static inline int find_acpi_cache_level_from_id(u32 cache_id)
> +{
> +	return -ENOENT;
> +}
>   #endif
>   
>   void acpi_arch_init(void);

Re: [PATCH v5 05/34] ACPI / PPTT: Add a helper to fill a cpumask from a cache_id

[Jeremy Linton]

On 11/17/25 10:59 AM, Ben Horgan wrote:
> From: James Morse <james.morse@arm.com>
> 
> MPAM identifies CPUs by the cache_id in the PPTT cache structure.
> 
> The driver needs to know which CPUs are associated with the cache.
> The CPUs may not all be online, so cacheinfo does not have the
> information.
> 
> Add a helper to pull this information out of the PPTT.

All the PPTT stuff look fine to me, patch 4+5 continue to build on some 
of the copy/pasty bits in this module which isn't ideal but seems to be 
the best way forward at the moment.

Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>

Thanks again for taking care of this.

> 
> CC: Rohit Mathew <Rohit.Mathew@arm.com>
> Reviewed-by: Gavin Shan <gshan@redhat.com>
> Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Fenghua Yu <fenghuay@nvidia.com>
> Tested-by: Carl Worth <carl@os.amperecomputing.com>
> Tested-by: Gavin Shan <gshan@redhat.com>
> Tested-by: Zeng Heng <zengheng4@huawei.com>
> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
> Signed-off-by: James Morse <james.morse@arm.com>
> Signed-off-by: Ben Horgan <ben.horgan@arm.com>
> ---
> Changes since v4:
> Same changes as previous patch in series
> do/while
> initialisation of acpi_cpu_id
> use new version of acpi_pptt_cache_v1_full
> 
> Changes since v3:
> Equivalent changes to the previous patch:
>   Tags dropped due to rework
>   Fallout/simplification from adding acpi_pptt_cache_v1_full
>   Look for each cache type before incrementing level
> ---
>   drivers/acpi/pptt.c  | 65 ++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/acpi.h |  6 ++++
>   2 files changed, 71 insertions(+)
> 
> diff --git a/drivers/acpi/pptt.c b/drivers/acpi/pptt.c
> index 5b1e9e410204..cea80337f01f 100644
> --- a/drivers/acpi/pptt.c
> +++ b/drivers/acpi/pptt.c
> @@ -998,3 +998,68 @@ int find_acpi_cache_level_from_id(u32 cache_id)
>   
>   	return -ENOENT;
>   }
> +
> +/**
> + * acpi_pptt_get_cpumask_from_cache_id() - Get the cpus associated with the
> + *					   specified cache
> + * @cache_id: The id field of the cache
> + * @cpus: Where to build the cpumask
> + *
> + * Determine which CPUs are below this cache in the PPTT. This allows the property
> + * to be found even if the CPUs are offline.
> + *
> + * The PPTT table must be rev 3 or later,
> + *
> + * Return: -ENOENT if the PPTT doesn't exist, or the cache cannot be found.
> + * Otherwise returns 0 and sets the cpus in the provided cpumask.
> + */
> +int acpi_pptt_get_cpumask_from_cache_id(u32 cache_id, cpumask_t *cpus)
> +{
> +	int cpu;
> +	struct acpi_table_header *table;
> +
> +	cpumask_clear(cpus);
> +
> +	table = acpi_get_pptt();
> +	if (!table)
> +		return -ENOENT;
> +
> +	if (table->revision < 3)
> +		return -ENOENT;
> +
> +	for_each_possible_cpu(cpu) {
> +		bool empty;
> +		int level = 1;
> +		u32 acpi_cpu_id = get_acpi_id_for_cpu(cpu);
> +		struct acpi_pptt_cache *cache;
> +		struct acpi_pptt_processor *cpu_node;
> +
> +		cpu_node = acpi_find_processor_node(table, acpi_cpu_id);
> +		if (!cpu_node)
> +			continue;
> +
> +		do {
> +			int cache_type[] = {CACHE_TYPE_INST, CACHE_TYPE_DATA, CACHE_TYPE_UNIFIED};
> +
> +			empty = true;
> +			for (int i = 0; i < ARRAY_SIZE(cache_type); i++) {
> +				struct acpi_pptt_cache_v1_full *cache_v1;
> +
> +				cache = acpi_find_cache_node(table, acpi_cpu_id, cache_type[i],
> +							     level, &cpu_node);
> +
> +				if (!cache)
> +					continue;
> +
> +				empty = false;
> +
> +				cache_v1 = upgrade_pptt_cache(cache);
> +				if (cache_v1 && cache_v1->cache_id == cache_id)
> +					cpumask_set_cpu(cpu, cpus);
> +			}
> +			level++;
> +		} while (!empty);
> +	}
> +
> +	return 0;
> +}
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index be074bdfd4d1..a9dbacabdf89 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -1543,6 +1543,7 @@ int find_acpi_cpu_topology_package(unsigned int cpu);
>   int find_acpi_cpu_topology_hetero_id(unsigned int cpu);
>   void acpi_pptt_get_cpus_from_container(u32 acpi_cpu_id, cpumask_t *cpus);
>   int find_acpi_cache_level_from_id(u32 cache_id);
> +int acpi_pptt_get_cpumask_from_cache_id(u32 cache_id, cpumask_t *cpus);
>   #else
>   static inline int acpi_pptt_cpu_is_thread(unsigned int cpu)
>   {
> @@ -1570,6 +1571,11 @@ static inline int find_acpi_cache_level_from_id(u32 cache_id)
>   {
>   	return -ENOENT;
>   }
> +static inline int acpi_pptt_get_cpumask_from_cache_id(u32 cache_id,
> +						      cpumask_t *cpus)
> +{
> +	return -ENOENT;
> +}
>   #endif
>   
>   void acpi_arch_init(void);