public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@nxp.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	Rui Miguel Silva <rmfrfs@gmail.com>,
	Martin Kepplinger-Novakovic <martink@posteo.de>,
	Purism Kernel Team <kernel@puri.sm>,
	linux-media@vger.kernel.org, imx@lists.linux.dev,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] media: nxp: use cleanup __free(fwnode_handle) simplify code
Date: Wed, 3 Dec 2025 16:31:55 -0500	[thread overview]
Message-ID: <aTCsS52Bbtld/vTk@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20251119050239.GA16725@pendragon.ideasonboard.com>

On Wed, Nov 19, 2025 at 02:02:39PM +0900, Laurent Pinchart wrote:
> On Wed, Nov 19, 2025 at 01:25:29PM +0900, Laurent Pinchart wrote:
> > On Mon, Nov 17, 2025 at 01:58:14PM -0500, Frank Li wrote:
> > > Use cleanup __free(fwnode_handle) simplify code. Change to dev_err_probe()
> > > because replace goto with return.
> > >
> > > Add missed "\n" at error message.
> > >
> > > No functional change.
> > >
> > > Signed-off-by: Frank Li <Frank.Li@nxp.com>
> > > ---
> > >  drivers/media/platform/nxp/imx-mipi-csis.c    | 31 +++++++++------------------
> > >  drivers/media/platform/nxp/imx8mq-mipi-csi2.c | 31 +++++++++------------------
> > >  2 files changed, 20 insertions(+), 42 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/nxp/imx-mipi-csis.c b/drivers/media/platform/nxp/imx-mipi-csis.c
> > > index ce93d868746f002c22e2f86b1e0aa84ec1a76061..d924adb406a30797b66f0094ab17e98ad44fefac 100644
> > > --- a/drivers/media/platform/nxp/imx-mipi-csis.c
> > > +++ b/drivers/media/platform/nxp/imx-mipi-csis.c
> > > @@ -12,6 +12,7 @@
> > >   *
> > >   */
> > >
> > > +#include <linux/cleanup.h>
> > >  #include <linux/clk.h>
> > >  #include <linux/debugfs.h>
> > >  #include <linux/delay.h>
> > > @@ -1349,28 +1350,25 @@ static int mipi_csis_async_register(struct mipi_csis_device *csis)
> > >  		.bus_type = V4L2_MBUS_CSI2_DPHY,
> > >  	};
> > >  	struct v4l2_async_connection *asd;
> > uuu> -	struct fwnode_handle *ep;
> > >  	unsigned int i;
> > >  	int ret;
> > >
> > >  	v4l2_async_subdev_nf_init(&csis->notifier, &csis->sd);
> > >
> > > -	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csis->dev), 0, 0,
> > > -					     FWNODE_GRAPH_ENDPOINT_NEXT);
> > > +	struct fwnode_handle *ep __free(fwnode_handle) =
> > > +		fwnode_graph_get_endpoint_by_id(dev_fwnode(csis->dev), 0, 0,
> > > +						FWNODE_GRAPH_ENDPOINT_NEXT);
> >
> > Let's avoid mixing variable declarations and code, this is a style
> > change that is not widely accepted (yet). You can write
> >
> > 	struct fwnode_handle *ep __free(fwnode_handle) = NULL;
> >  	struct v4l2_async_connection *asd;
> > 	unsigned int i;
> > 	int ret;
> >
> >   	v4l2_async_subdev_nf_init(&csis->notifier, &csis->sd);
> >
> > 	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csis->dev), 0, 0,
> > 					     FWNODE_GRAPH_ENDPOINT_NEXT);
>
> Quite a coincidence, there's an ongoing mail thread on LKML about this
> topic:
>
> http://lore.kernel.org/r/CAHk-=whPZoi03ZwphxiW6cuWPtC3nyKYS8_BThgztCdgPWP1WA@mail.gmail.com

Laurent:

	After read above thread and cleanup.h.

	Look like my method is prefered.

Frank

>
> > >  	if (!ep)
> > >  		return -ENOTCONN;
> > >
> > >  	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > >  	if (ret)
> > > -		goto err_parse;
> > > +		return ret;
> > >
> > >  	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
> > > -		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
> > > -			dev_err(csis->dev,
> > > -				"data lanes reordering is not supported");
> > > -			ret = -EINVAL;
> > > -			goto err_parse;
> > > -		}
> > > +		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1)
> > > +			return dev_err_probe(csis->dev, -EINVAL,
> > > +					     "data lanes reordering is not supported\n");
> >
> > To switch to dev_err_probe(), we should drop the error message in the
> > probe() function when mipi_csis_async_register() fails, and make sure
> > every error path in this function prints a message. I'd prefer splitting
> > that to a separate patch.
> >
> > >  	}
> > >
> > >  	csis->bus = vep.bus.mipi_csi2;
> > > @@ -1381,12 +1379,8 @@ static int mipi_csis_async_register(struct mipi_csis_device *csis)
> > >
> > >  	asd = v4l2_async_nf_add_fwnode_remote(&csis->notifier, ep,
> > >  					      struct v4l2_async_connection);
> > > -	if (IS_ERR(asd)) {
> > > -		ret = PTR_ERR(asd);
> > > -		goto err_parse;
> > > -	}
> > > -
> > > -	fwnode_handle_put(ep);
> > > +	if (IS_ERR(asd))
> > > +		return PTR_ERR(asd);
> > >
> > >  	csis->notifier.ops = &mipi_csis_notify_ops;
> > >
> > > @@ -1395,11 +1389,6 @@ static int mipi_csis_async_register(struct mipi_csis_device *csis)
> > >  		return ret;
> > >
> > >  	return v4l2_async_register_subdev(&csis->sd);
> > > -
> > > -err_parse:
> > > -	fwnode_handle_put(ep);
> > > -
> > > -	return ret;
> > >  }
> > >
> > >  /* -----------------------------------------------------------------------------
> > > diff --git a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> > > index 75709161fb26a61239b94430365849e022fdc14f..94882568405db55593c5c51722db2233a64d53e4 100644
> > > --- a/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> > > +++ b/drivers/media/platform/nxp/imx8mq-mipi-csi2.c
> > > @@ -6,6 +6,7 @@
> > >   */
> > >
> > >  #include <linux/bitfield.h>
> > > +#include <linux/cleanup.h>
> > >  #include <linux/clk.h>
> > >  #include <linux/clk-provider.h>
> > >  #include <linux/delay.h>
> > > @@ -717,28 +718,25 @@ static int imx8mq_mipi_csi_async_register(struct csi_state *state)
> > >  		.bus_type = V4L2_MBUS_CSI2_DPHY,
> > >  	};
> > >  	struct v4l2_async_connection *asd;
> > > -	struct fwnode_handle *ep;
> > >  	unsigned int i;
> > >  	int ret;
> > >
> > >  	v4l2_async_subdev_nf_init(&state->notifier, &state->sd);
> > >
> > > -	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
> > > -					     FWNODE_GRAPH_ENDPOINT_NEXT);
> > > +	struct fwnode_handle *ep __free(fwnode_handle) =
> > > +		fwnode_graph_get_endpoint_by_id(dev_fwnode(state->dev), 0, 0,
> > > +						FWNODE_GRAPH_ENDPOINT_NEXT);
> >
> > Same comment as above.
> >
> > >  	if (!ep)
> > >  		return -ENOTCONN;
> > >
> > >  	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> > >  	if (ret)
> > > -		goto err_parse;
> > > +		return ret;
> > >
> > >  	for (i = 0; i < vep.bus.mipi_csi2.num_data_lanes; ++i) {
> > > -		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1) {
> > > -			dev_err(state->dev,
> > > -				"data lanes reordering is not supported");
> > > -			ret = -EINVAL;
> > > -			goto err_parse;
> > > -		}
> > > +		if (vep.bus.mipi_csi2.data_lanes[i] != i + 1)
> > > +			return dev_err_probe(state->dev, -EINVAL,
> > > +					     "data lanes reordering is not supported\n");
> >
> > And here too.
> >
> > Usage of __free(fwnode_handle) looks good, it just needs to be split to
> > a patch of its own.
> >
> > >  	}
> > >
> > >  	state->bus = vep.bus.mipi_csi2;
> > > @@ -749,12 +747,8 @@ static int imx8mq_mipi_csi_async_register(struct csi_state *state)
> > >
> > >  	asd = v4l2_async_nf_add_fwnode_remote(&state->notifier, ep,
> > >  					      struct v4l2_async_connection);
> > > -	if (IS_ERR(asd)) {
> > > -		ret = PTR_ERR(asd);
> > > -		goto err_parse;
> > > -	}
> > > -
> > > -	fwnode_handle_put(ep);
> > > +	if (IS_ERR(asd))
> > > +		return PTR_ERR(asd);
> > >
> > >  	state->notifier.ops = &imx8mq_mipi_csi_notify_ops;
> > >
> > > @@ -763,11 +757,6 @@ static int imx8mq_mipi_csi_async_register(struct csi_state *state)
> > >  		return ret;
> > >
> > >  	return v4l2_async_register_subdev(&state->sd);
> > > -
> > > -err_parse:
> > > -	fwnode_handle_put(ep);
> > > -
> > > -	return ret;
> > >  }
> > >
> > >  /* -----------------------------------------------------------------------------
>
> --
> Regards,
>
> Laurent Pinchart


      reply	other threads:[~2025-12-03 21:32 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-11-17 18:58 [PATCH 0/4] media: platform: nxp: Trivial cleanup pathces Frank Li
2025-11-17 18:58 ` [PATCH 1/4] media: nxp: use devm_mutex_init() simple code Frank Li
2025-11-19  4:22   ` Laurent Pinchart
2025-11-19 16:17     ` Frank Li
2025-11-17 18:58 ` [PATCH 2/4] media: nxp: use dev_err_probe() to simplify code Frank Li
2025-11-19  4:33   ` Laurent Pinchart
2025-11-17 18:58 ` [PATCH 3/4] media: nxp: imx8-isi: use devm_pm_runtime_enable() " Frank Li
2025-11-19  4:24   ` Laurent Pinchart
2025-11-17 18:58 ` [PATCH 4/4] media: nxp: use cleanup __free(fwnode_handle) " Frank Li
2025-11-19  4:25   ` Laurent Pinchart
2025-11-19  5:02     ` Laurent Pinchart
2025-12-03 21:31       ` Frank Li [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aTCsS52Bbtld/vTk@lizhi-Precision-Tower-5810 \
    --to=frank.li@nxp.com \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=kernel@puri.sm \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=martink@posteo.de \
    --cc=mchehab@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=rmfrfs@gmail.com \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox