[PATCH 1/3] clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc

[PATCH 1/3] clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc

[Krzysztof Kozlowski]

After renaming round_rate->determine, kerneldoc does not match anymore,
causing W=1 warnings:

  Warning: drivers/clk/zynqmp/divider.c:122 function parameter 'req' not described in 'zynqmp_clk_divider_determine_rate'
  Warning: drivers/clk/zynqmp/divider.c:122 expecting prototype for zynqmp_clk_divider_round_rate(). Prototype was for zynqmp_clk_divider_determine_rate() instead

Fixes: 0f9cf96a01fd ("clk: zynqmp: divider: convert from round_rate() to determine_rate()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 drivers/clk/zynqmp/divider.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index c824eeacd8eb..5baa967aa7c9 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -111,10 +111,9 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw,
 }
 
 /**
- * zynqmp_clk_divider_round_rate() - Round rate of divider clock
+ * zynqmp_clk_divider_determine_rate() - Determine rate of divider clock
  * @hw:			handle between common and hardware-specific interfaces
- * @rate:		rate of clock to be set
- * @prate:		rate of parent clock
+ * @req:		rate of clock to be set
  *
  * Return: 0 on success else error+reason
  */
-- 
2.51.0

[PATCH 2/3] clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc

[Krzysztof Kozlowski]

After renaming round_rate->determine, kerneldoc does not match anymore,
causing W=1 warnings:

  pll.c:102 function parameter 'req' not described in 'zynqmp_pll_determine_rate'
  pll.c:102 expecting prototype for zynqmp_pll_round_rate(). Prototype was for zynqmp_pll_determine_rate() instead

Fixes: 193650c7a873 ("clk: zynqmp: pll: convert from round_rate() to determine_rate()")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 drivers/clk/zynqmp/pll.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index 630a3936c97c..6bc2c3934f56 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -91,10 +91,9 @@ static inline void zynqmp_pll_set_mode(struct clk_hw *hw, bool on)
 }
 
 /**
- * zynqmp_pll_round_rate() - Round a clock frequency
+ * zynqmp_pll_determine_rate() - Round a clock frequency
  * @hw:		Handle between common and hardware-specific interfaces
- * @rate:	Desired clock frequency
- * @prate:	Clock frequency of parent clock
+ * @req:	Desired clock frequency
  *
  * Return: Frequency closest to @rate the hardware can generate
  */
-- 
2.51.0

[PATCH 3/3] clk: zynqmp: ipi-mailbox: Simplify with scoped for each OF child loop

[Krzysztof Kozlowski]

Use scoped for-each loop when iterating over device nodes to make code a
bit simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
---
 drivers/mailbox/zynqmp-ipi-mailbox.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c
index 967967b2b8a9..42d2583e44ca 100644
--- a/drivers/mailbox/zynqmp-ipi-mailbox.c
+++ b/drivers/mailbox/zynqmp-ipi-mailbox.c
@@ -904,7 +904,7 @@ static void zynqmp_ipi_free_mboxes(struct zynqmp_ipi_pdata *pdata)
 static int zynqmp_ipi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
-	struct device_node *nc, *np = pdev->dev.of_node;
+	struct device_node *np = pdev->dev.of_node;
 	struct zynqmp_ipi_pdata *pdata;
 	struct of_phandle_args out_irq;
 	struct zynqmp_ipi_mbox *mbox;
@@ -940,13 +940,12 @@ static int zynqmp_ipi_probe(struct platform_device *pdev)
 	pdata->num_mboxes = num_mboxes;
 
 	mbox = pdata->ipi_mboxes;
-	for_each_available_child_of_node(np, nc) {
+	for_each_available_child_of_node_scoped(np, nc) {
 		mbox->pdata = pdata;
 		mbox->setup_ipi_fn = ipi_fn;
 
 		ret = zynqmp_ipi_mbox_probe(mbox, nc);
 		if (ret) {
-			of_node_put(nc);
 			dev_err(dev, "failed to probe subdev.\n");
 			ret = -EINVAL;
 			goto free_mbox_dev;
-- 
2.51.0

Re: [PATCH 3/3] clk: zynqmp: ipi-mailbox: Simplify with scoped for each OF child loop

[Krzysztof Kozlowski]

On 24/12/2025 12:42, Krzysztof Kozlowski wrote:
> Use scoped for-each loop when iterating over device nodes to make code a
> bit simpler.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> ---
>  drivers/mailbox/zynqmp-ipi-mailbox.c | 5 ++---

I am sorry, that's a mailbox patch and should be in different patchset.
Please review/pick only the first two.

Best regards,
Krzysztof

Re: [PATCH 1/3] clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc

[Brian Masney]

On Wed, Dec 24, 2025 at 12:42:11PM +0100, Krzysztof Kozlowski wrote:
> After renaming round_rate->determine, kerneldoc does not match anymore,
> causing W=1 warnings:
> 
>   Warning: drivers/clk/zynqmp/divider.c:122 function parameter 'req' not described in 'zynqmp_clk_divider_determine_rate'
>   Warning: drivers/clk/zynqmp/divider.c:122 expecting prototype for zynqmp_clk_divider_round_rate(). Prototype was for zynqmp_clk_divider_determine_rate() instead
> 
> Fixes: 0f9cf96a01fd ("clk: zynqmp: divider: convert from round_rate() to determine_rate()")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Thanks for the fixup!

Reviewed-by: Brian Masney <bmasney@redhat.com>

Re: [PATCH 2/3] clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc

[Brian Masney]

On Wed, Dec 24, 2025 at 12:42:12PM +0100, Krzysztof Kozlowski wrote:
> After renaming round_rate->determine, kerneldoc does not match anymore,
> causing W=1 warnings:
> 
>   pll.c:102 function parameter 'req' not described in 'zynqmp_pll_determine_rate'
>   pll.c:102 expecting prototype for zynqmp_pll_round_rate(). Prototype was for zynqmp_pll_determine_rate() instead
> 
> Fixes: 193650c7a873 ("clk: zynqmp: pll: convert from round_rate() to determine_rate()")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>

Thanks for the fixup!

Reviewed-by: Brian Masney <bmasney@redhat.com>