Re: [PATCH v4 4/5] arm64: dts: freescale: Add the GOcontroll Moduline IV

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Nov 17, 2025 at 04:01:29PM +0100, Maud Spierings via B4 Relay wrote:
> From: Maud Spierings <maudspierings@gocontroll.com>
> 
> The Moduline IV is a part of the wider GOcontroll Moduline ecosystem. These
> are embedded controllers that focus on modularity with their swappable IO
> modules.
> 
> Features:
> - up to 8 Moduline IO modules
> - 4 CAN busses
> - 1 LIN bus
> - 1 Ethernet
> - 4 RGB leds
> - optional Wi-Fi/Bluetooth
> - optional 4G/GPS
> 
> Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile             |   2 +
>  .../imx8mm-tx8m-1610-moduline-iv-306-d.dts         | 800 +++++++++++++++++++++
>  2 files changed, 802 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 525ef180481d..b2fef44e0a37 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -124,6 +124,8 @@ imx8mm-evk-pcie-ep-dtbs += imx8mm-evk.dtb imx-pcie0-ep.dtbo
>  imx8mm-evkb-pcie-ep-dtbs += imx8mm-evkb.dtb imx-pcie0-ep.dtbo
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk-pcie-ep.dtb imx8mm-evkb-pcie-ep.dtb
>  
> +dtb-$(CONFIG_ARCH_MXC) += imx8mm-tx8m-1610-moduline-iv-306-d.dtb
> +
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mm-iot-gateway.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-tx8m-1610-moduline-iv-306-d.dts b/arch/arm64/boot/dts/freescale/imx8mm-tx8m-1610-moduline-iv-306-d.dts
> new file mode 100644
> index 000000000000..01df9d77fa51
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-tx8m-1610-moduline-iv-306-d.dts
> @@ -0,0 +1,800 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2025 Maud Spierings <maudspierings@gocontroll.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "imx8mm-tx8m-1610.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> +	chassis-type = "embedded";
> +	compatible = "gocontroll,moduline-iv-306-d", "karo,imx8mm-tx8m-1610", "fsl,imx8mm";
> +	hardware = "Moduline IV V3.06-D";
> +	model = "GOcontroll Moduline IV";
> +
> +	aliases {
> +		usb-host = &usbotg2;
> +		usbotg = &usbotg1;
> +		spi0 = &ecspi2; /* spidev number compatibility */
> +		spi1 = &ecspi3; /* spidev number compatibility */
> +		spi2 = &ecspi1; /* spidev number compatibility */

Can we order aliases alphabetically?

Shawn