From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Anand Moon <linux.amoon@gmail.com>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
FUKAUMI Naoki <naoki@radxa.com>,
Cristian Ciocaltea <cristian.ciocaltea@collabora.com>,
Yongbo Zhang <giraffesnn123@gmail.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/Rockchip SoC support"
<linux-arm-kernel@lists.infradead.org>,
"open list:ARM/Rockchip SoC support"
<linux-rockchip@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>,
"open list:USB TYPEC CLASS" <linux-usb@vger.kernel.org>
Subject: Re: [PATCH v1 2/3] arm64: dts: rockchip: rk3588-rock-5b-5bp-5t: Fix USB host phy-supply on Rock 5b-5bp-5t SbC
Date: Sat, 3 Jan 2026 15:04:47 +0100 [thread overview]
Message-ID: <aVkfNBUDUumzV0-X@venus> (raw)
In-Reply-To: <20260103083232.9510-3-linux.amoon@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1890 bytes --]
Hi,
On Sat, Jan 03, 2026 at 02:01:18PM +0530, Anand Moon wrote:
> The USB host USB2 and USB3 on the Rock 5B, 5BP, and 5T is powered by the
> USB_HOST_PWREN_H gpio pin which is used to enable vcc5v0_host host
> regulator which ensures proper power sequencing and management for onboard
> Double-USB-HOST.
>
> Update the u2phy2_host node to reference the correct phy-supply.
>
> Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
u2phy2_host is connected to an onboard USB hub chip, which is
powered by &vcc5v0_sys as the comment says.
You can see this on page 9 of the v1.45 ROCK 5B schematics (page
name USB2HUB). The usb hub chip uses VCC5V0_SYS + VCC_3V3_S0 and is
connected to USB20_HOST0_DP, USB20_HOST0_DM. The related USB
controller for that in the upstream DT is &usb_host0_ehci, which
in turn is using &u2phy2_host. Thus at least for the ROCK 5B the
existing DT is correct. Properly describing the downstream port
VBUS regulator would require something like the following series:
https://lore.kernel.org/all/20250911-v6-16-topic-usb-onboard-dev-v4-0-1af288125d74@pengutronix.de/
Greetings,
-- Sebastian
> arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
> index 0cd8ac7bf538..886d788572fc 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
> @@ -981,8 +981,7 @@ &u2phy2 {
> };
>
> &u2phy2_host {
> - /* connected to USB hub, which is powered by vcc5v0_sys */
> - phy-supply = <&vcc5v0_sys>;
> + phy-supply = <&vcc5v0_host>;
> status = "okay";
> };
>
> --
> 2.50.1
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2026-01-03 14:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-03 8:31 [PATCH v1 0/3] Typc fusb302 powerloss issue on Radxa Rock 5b Anand Moon
2026-01-03 8:31 ` [PATCH v1 1/3] arm64: dts: rockchip: rk3588-rock-5b-5bp-5t: Correct Type-C pin bias settings Anand Moon
2026-01-03 13:52 ` Sebastian Reichel
2026-01-03 8:31 ` [PATCH v1 2/3] arm64: dts: rockchip: rk3588-rock-5b-5bp-5t: Fix USB host phy-supply on Rock 5b-5bp-5t SbC Anand Moon
2026-01-03 14:04 ` Sebastian Reichel [this message]
2026-01-03 8:31 ` [PATCH v1 3/3] usb: typec: fusb302: Switch to threaded interrupt handler Anand Moon
2026-01-03 12:01 ` Hans de Goede
2026-01-07 9:52 ` 张永波
2026-01-07 10:52 ` Hans de Goede
2026-01-03 14:24 ` [PATCH v1 0/3] Typc fusb302 powerloss issue on Radxa Rock 5b Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aVkfNBUDUumzV0-X@venus \
--to=sebastian.reichel@collabora.com \
--cc=conor+dt@kernel.org \
--cc=cristian.ciocaltea@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=giraffesnn123@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=heiko@sntech.de \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux.amoon@gmail.com \
--cc=naoki@radxa.com \
--cc=nicolas.frattaroli@collabora.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).