public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
To: amitsd@google.com
Cc: "Sebastian Reichel" <sre@kernel.org>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"André Draszik" <andre.draszik@linaro.org>,
	"Lee Jones" <lee@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Badhri Jagan Sridharan" <badhri@google.com>,
	"Peter Griffin" <peter.griffin@linaro.org>,
	"Tudor Ambarus" <tudor.ambarus@linaro.org>,
	"Alim Akhtar" <alim.akhtar@samsung.com>,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	"RD Babiera" <rdbabiera@google.com>,
	"Kyle Tso" <kyletso@google.com>
Subject: Re: [PATCH v3 5/5] usb: typec: tcpm/tcpci_maxim: deprecate WAR for setting charger mode
Date: Mon, 5 Jan 2026 18:10:01 +0200	[thread overview]
Message-ID: <aVvhvuq6Ls1v3B_E@kuha> (raw)
In-Reply-To: <20251227-max77759-charger-v3-5-54e664f5ca92@google.com>

Sat, Dec 27, 2025 at 12:04:25AM +0000, Amit Sunil Dhamne via B4 Relay kirjoitti:
> From: Amit Sunil Dhamne <amitsd@google.com>
> 
> TCPCI maxim driver directly writes to the charger's register space to
> set charger mode depending on the power role. As MAX77759 chg driver
> exists, this WAR is not required.
> 
> Instead, use a regulator interface to source vbus when typec is in
> source power mode. In other power modes, this regulator will be turned
> off if active.
> 
> Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/tcpm/tcpci_maxim.h      |  1 +
>  drivers/usb/typec/tcpm/tcpci_maxim_core.c | 54 +++++++++++++++++++------------
>  2 files changed, 34 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim.h b/drivers/usb/typec/tcpm/tcpci_maxim.h
> index b33540a42a95..b314606eb0f6 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim.h
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim.h
> @@ -60,6 +60,7 @@ struct max_tcpci_chip {
>  	struct tcpm_port *port;
>  	enum contamiant_state contaminant_state;
>  	bool veto_vconn_swap;
> +	struct regulator *vbus_reg;
>  };
>  
>  static inline int max_tcpci_read16(struct max_tcpci_chip *chip, unsigned int reg, u16 *val)
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> index 19f638650796..e9e2405c5ca0 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> @@ -10,6 +10,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
>  #include <linux/usb/pd.h>
>  #include <linux/usb/tcpci.h>
>  #include <linux/usb/tcpm.h>
> @@ -35,12 +36,6 @@
>   */
>  #define TCPC_RECEIVE_BUFFER_LEN				32
>  
> -#define MAX_BUCK_BOOST_SID				0x69
> -#define MAX_BUCK_BOOST_OP				0xb9
> -#define MAX_BUCK_BOOST_OFF				0
> -#define MAX_BUCK_BOOST_SOURCE				0xa
> -#define MAX_BUCK_BOOST_SINK				0x5
> -
>  static const struct regmap_range max_tcpci_tcpci_range[] = {
>  	regmap_reg_range(0x00, 0x95)
>  };
> @@ -202,32 +197,49 @@ static void process_rx(struct max_tcpci_chip *chip, u16 status)
>  	tcpm_pd_receive(chip->port, &msg, rx_type);
>  }
>  
> +static int get_vbus_regulator_handle(struct max_tcpci_chip *chip)
> +{
> +	if (IS_ERR_OR_NULL(chip->vbus_reg)) {
> +		chip->vbus_reg = devm_regulator_get_exclusive(chip->dev,
> +							      "vbus");
> +		if (IS_ERR_OR_NULL(chip->vbus_reg)) {
> +			dev_err(chip->dev,
> +				"Failed to get vbus regulator handle");
> +			return -ENODEV;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
>  static int max_tcpci_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, bool source, bool sink)
>  {
>  	struct max_tcpci_chip *chip = tdata_to_max_tcpci(tdata);
> -	u8 buffer_source[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SOURCE};
> -	u8 buffer_sink[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_SINK};
> -	u8 buffer_none[2] = {MAX_BUCK_BOOST_OP, MAX_BUCK_BOOST_OFF};
> -	struct i2c_client *i2c = chip->client;
>  	int ret;
>  
> -	struct i2c_msg msgs[] = {
> -		{
> -			.addr = MAX_BUCK_BOOST_SID,
> -			.flags = i2c->flags & I2C_M_TEN,
> -			.len = 2,
> -			.buf = source ? buffer_source : sink ? buffer_sink : buffer_none,
> -		},
> -	};
> -
>  	if (source && sink) {
>  		dev_err(chip->dev, "Both source and sink set\n");
>  		return -EINVAL;
>  	}
>  
> -	ret = i2c_transfer(i2c->adapter, msgs, 1);
> +	ret = get_vbus_regulator_handle(chip);
> +	if (ret) {
> +		/*
> +		 * Regulator is not necessary for sink only applications. Return
> +		 * success in cases where sink mode is being modified.
> +		 */
> +		return source ? ret : 1;
> +	}
> +
> +	if (source) {
> +		if (!regulator_is_enabled(chip->vbus_reg))
> +			ret = regulator_enable(chip->vbus_reg);
> +	} else {
> +		if (regulator_is_enabled(chip->vbus_reg))
> +			ret = regulator_disable(chip->vbus_reg);
> +	}
>  
> -	return  ret < 0 ? ret : 1;
> +	return ret < 0 ? ret : 1;
>  }
>  
>  static void process_power_status(struct max_tcpci_chip *chip)
> 
> -- 
> 2.52.0.351.gbe84eed79e-goog
> 

-- 
heikki


  reply	other threads:[~2026-01-05 16:10 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-27  0:04 [PATCH v3 0/5] Introduce MAX77759 charger driver Amit Sunil Dhamne via B4 Relay
2025-12-27  0:04 ` [PATCH v3 1/5] dt-bindings: mfd: maxim,max77759: reference power-supply schema and add regulator property Amit Sunil Dhamne via B4 Relay
2025-12-29  8:50   ` Krzysztof Kozlowski
2026-01-05 16:35   ` André Draszik
2025-12-27  0:04 ` [PATCH v3 2/5] dt-bindings: usb: maxim,max33359: Add supply property for vbus Amit Sunil Dhamne via B4 Relay
2025-12-27  0:04 ` [PATCH v3 3/5] mfd: max77759: add register bitmasks and modify irq configs for charger Amit Sunil Dhamne via B4 Relay
2026-01-05 16:45   ` André Draszik
2026-01-05 19:58     ` Amit Sunil Dhamne
2025-12-27  0:04 ` [PATCH v3 4/5] power: supply: max77759: add charger driver Amit Sunil Dhamne via B4 Relay
2026-01-05 17:32   ` André Draszik
2026-01-06 23:41     ` Amit Sunil Dhamne
2026-01-07  1:14       ` Amit Sunil Dhamne
2026-01-12 13:47         ` André Draszik
2026-01-12 19:37           ` Amit Sunil Dhamne
2026-01-13 10:02             ` André Draszik
2026-01-14  0:47               ` Amit Sunil Dhamne
2026-01-14 10:20                 ` André Draszik
2026-01-15  2:52                   ` Amit Sunil Dhamne
2025-12-27  0:04 ` [PATCH v3 5/5] usb: typec: tcpm/tcpci_maxim: deprecate WAR for setting charger mode Amit Sunil Dhamne via B4 Relay
2026-01-05 16:10   ` Heikki Krogerus [this message]
2026-01-05 16:47   ` André Draszik
2026-01-09 13:14   ` Heikki Krogerus
2026-01-10  2:16     ` Amit Sunil Dhamne
2026-01-12 13:20       ` Heikki Krogerus
2026-01-15  2:58         ` Amit Sunil Dhamne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aVvhvuq6Ls1v3B_E@kuha \
    --to=heikki.krogerus@linux.intel.com \
    --cc=alim.akhtar@samsung.com \
    --cc=amitsd@google.com \
    --cc=andre.draszik@linaro.org \
    --cc=badhri@google.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzk+dt@kernel.org \
    --cc=kyletso@google.com \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter.griffin@linaro.org \
    --cc=rdbabiera@google.com \
    --cc=robh@kernel.org \
    --cc=sre@kernel.org \
    --cc=tudor.ambarus@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox