[PATCH v3 0/2] Add device tree support for NXP i.MX95 15x15 FRDM board

[PATCH v3 0/2] Add device tree support for NXP i.MX95 15x15 FRDM board

[Lei Xu]

The NXP i.MX95 15x15 FRDM board is a compact and cost-effective
development board based on the i.MX95 applications processor.

This patch set adds device tree support for the board:
 - Patch 1 introduces the DT compatible string.
 - Patch 2 provides the complete device tree description.

Signed-off-by: Lei Xu <lei.xu@nxp.com>
---
Changes in v3:
- Add a blank line between the cpu and codec node definitions.
- Link to v2: https://lore.kernel.org/r/20251217-127-v2-0-67cb12e56242@nxp.com

Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.

Link to v1: https://lore.kernel.org/r/20251207-127-v1-0-5a2eeb69f150@nxp.com

---
Lei Xu (2):
      dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
      arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

 Documentation/devicetree/bindings/arm/fsl.yaml     |   1 +
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 964 +++++++++++++++++++++
 3 files changed, 966 insertions(+)
---
base-commit: 6987d58a9cbc5bd57c983baa514474a86c945d56
change-id: 20251207-127-4e8551e8bdaf

Best regards,
-- 
Lei Xu <lei.xu@nxp.com>

[PATCH v3 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board

[Lei Xu]

Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM
development board, a compact and cost-effective platform based on
the i.MX95 applications processor.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Lei Xu <lei.xu@nxp.com>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 68a2d5fecc43..4b6188d39be6 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1432,6 +1432,7 @@ properties:
         items:
           - enum:
               - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
+              - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board
               - fsl,imx95-19x19-evk       # i.MX95 19x19 EVK Board
               - toradex,verdin-imx95-19x19-evk  # i.MX95 Verdin Evaluation Kit (EVK)
           - const: fsl,imx95

-- 
2.34.1

[PATCH v3 2/2] arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

[Lei Xu]

The i.MX95 15x15 FRDM board is a compact and cost-effective development
platform based on the i.MX95 applications processor.

Add device tree support for this board, including:
 - LPUART1 and LPUART5
 - NETC
 - USB
 - PCIe
 - uSDHC1, uSDHC2 and uSDHC3
 - FlexCAN2 and FlexCAN5
 - LPI2C2, LPI2C3, LPI2C4 and their child nodes
 - Watchdog3

Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Lei Xu <lei.xu@nxp.com>
---
Changes in v2:
- Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
- Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
- Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.

---
Changes in v3:
- Add a blank line between the cpu and codec node definitions.
---
 arch/arm64/boot/dts/freescale/Makefile             |   1 +
 arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts | 964 +++++++++++++++++++++
 2 files changed, 965 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index f30d3fd724d0..71308d19d35e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -400,6 +400,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx943-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx95-15x15-frdm.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-sof.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
new file mode 100644
index 000000000000..ca1c4966c867
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-frdm.dts
@@ -0,0 +1,964 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx95.dtsi"
+
+#define BRD_SM_CTRL_SD3_WAKE		0x8000	/*!< PCAL6408A-0 */
+#define BRD_SM_CTRL_PCIE1_WAKE		0x8001	/*!< PCAL6408A-4 */
+#define BRD_SM_CTRL_BT_WAKE		0x8002	/*!< PCAL6408A-5 */
+#define BRD_SM_CTRL_PCIE2_WAKE		0x8003	/*!< PCAL6408A-6 */
+#define BRD_SM_CTRL_BUTTON		0x8004	/*!< PCAL6408A-7 */
+
+/ {
+	compatible = "fsl,imx95-15x15-frdm", "fsl,imx95";
+	model = "NXP i.MX95 15X15 FRDM board";
+
+	aliases {
+		ethernet0 = &enetc_port0;
+		ethernet1 = &enetc_port1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &lpuart1;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		stdout-path = &lpuart1;
+	};
+
+	dmic: dmic {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <2>;
+	};
+
+	flexcan2_phy: can-phy {
+		compatible = "nxp,tja1051";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		/*
+		 * Shared SILENT GPIO: CAN PHYs enter silent mode
+		 * together (hardware design).
+		 */
+		silent-gpios = <&pcal6524 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	flexcan5_phy: can-phy {
+		compatible = "nxp,tja1051";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+		silent-gpios = <&pcal6524 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "+V1.8_SW";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_SW";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "+V5.0_SW";
+	};
+
+	reg_ext_3v3: regulator-ext-3v3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VCCEXT_3V3";
+	};
+
+	reg_ext_5v: regulator-ext-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "VCCEXT_5V";
+		gpio = <&pcal6524 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_ekey_pwr: regulator-m2-pwr {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "M.2-power-ekey";
+		gpio = <&pcal6524 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_m2_mkey_pwr: regulator-m2-mkey-pwr {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "M.2-mkey-power";
+		gpio = <&pcal6524 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD_SD2_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: regulator-usdhc3 {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WLAN_EN";
+		vin-supply = <&reg_m2_ekey_pwr>;
+		gpio = <&pcal6524 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * IW612 wifi chip needs more delay than other wifi chips to complete
+		 * the host interface initialization after power up, otherwise the
+		 * internal state of IW612 may be unstable, resulting in the failure of
+		 * the SDIO3.0 switch voltage.
+		 */
+		startup-delay-us = <20000>;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "USB_VBUS";
+		gpio = <&pcal6524 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux_cma: linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x7F000000>;
+			reusable;
+			size = <0 0x3c000000>;
+			linux,cma-default;
+		};
+
+		vdev0vring0: memory@88000000 {
+			reg = <0 0x88000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: memory@88008000 {
+			reg = <0 0x88008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: memory@88010000 {
+			reg = <0 0x88010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: memory@88018000 {
+			reg = <0 0x88018000 0 0x8000>;
+			no-map;
+		};
+
+		vdevbuffer: memory@88020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x88020000 0 0x100000>;
+			no-map;
+		};
+
+		rsc_table: memory@88220000 {
+			reg = <0 0x88220000 0 0x1000>;
+			no-map;
+		};
+
+		vpu_boot: memory@a0000000 {
+			reg = <0 0xa0000000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	sound-micfil {
+		compatible = "fsl,imx-audio-card";
+		model = "micfil-audio";
+
+		pri-dai-link {
+			link-name = "micfil hifi";
+			format = "i2s";
+
+			cpu {
+				sound-dai = <&micfil>;
+			};
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pcal6524 8 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		reg = <0x0 0x80000000 0 0x80000000>;
+		device_type = "memory";
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&enetc_port0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc0>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&enetc_port1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_enetc1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	phys = <&flexcan2_phy>;
+	status = "okay";
+};
+
+&flexcan5 {
+	pinctrl-0 = <&pinctrl_flexcan5>;
+	pinctrl-names = "default";
+	phys = <&flexcan5_phy>;
+	status = "okay";
+};
+
+&lpi2c2 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio5>;
+		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+		gpio-line-names = "ENET1 PHY reset",
+				  "ENET2 PHY reset",
+				  "SPI3/GPIO select",
+				  "UART3/GPIO select",
+				  "CAN2&5/GPIO select",
+				  "PWM/GPIO select",
+				  "Watch dog enable",
+				  "CAN1&2&5 silent",
+				  "SDIO_nRST",
+				  "WL_nDISABLE1",
+				  "WL_nDISABLE2",
+				  "M.2 Mkey NC06",
+				  "EXT_5V0_PWR_EN",
+				  "EXT_3V3_PWR_EN",
+				  "Mkey power control",
+				  "USB2 power control",
+				  "Ekey power control",
+				  "MIPI-DSICSI reset",
+				  "MIPI-DSI IO2",
+				  "MIPI-CSI reset",
+				  "LVDS TP reset",
+				  "LVDS BL enable",
+				  "LVDS BL power enable",
+				  "IT6263 reset";
+
+		lpspi-gpio-sel-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		lpuart-gpio-sel-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		can-gpio-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+
+		pwm-gpio-sel-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-high;
+		};
+	};
+};
+
+&lpi2c3 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		pinctrl-names = "default";
+
+		typec_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_con_hs: endpoint {
+						remote-endpoint = <&usb3_data_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&lpi2c4 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c4>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pca9632: led-controller@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		nxp,inverted-out;
+
+		led_backlight0: led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <0>;
+		};
+
+		led_backlight1: led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			function-enumerator = <1>;
+		};
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&micfil {
+	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
+			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
+			  <&scmi_clk IMX95_CLK_PDM>;
+	assigned-clock-parents = <0>, <0>, <0>, <0>,
+				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
+	assigned-clock-rates = <3932160000>,
+			       <3612672000>, <393216000>,
+			       <361267200>, <49152000>;
+	#sound-dai-cells = <0>;
+	pinctrl-0 = <&pinctrl_pdm>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mu7 {
+	status = "okay";
+};
+
+&netc_blk_ctrl {
+	status = "okay";
+};
+
+/* Configure MSI and IOMMU mappings specific to the i.MX95 15x15 FRDM board. */
+&netc_bus0 {
+	msi-map = <0x0 &its 0x60 0x1>,	//ENETC0 PF
+		  <0x10 &its 0x61 0x1>, //ENETC0 VF0
+		  <0x20 &its 0x62 0x1>, //ENETC0 VF1
+		  <0x40 &its 0x63 0x1>, //ENETC1 PF
+		  <0x50 &its 0x65 0x1>, //ENETC1 VF0
+		  <0x60 &its 0x66 0x1>, //ENETC1 VF1
+		  <0x80 &its 0x64 0x1>, //ENETC2 PF
+		  <0xc0 &its 0x67 0x1>; //NETC Timer
+	iommu-map = <0x0 &smmu 0x20 0x1>,
+		    <0x10 &smmu 0x21 0x1>,
+		    <0x20 &smmu 0x22 0x1>,
+		    <0x40 &smmu 0x23 0x1>,
+		    <0x50 &smmu 0x25 0x1>,
+		    <0x60 &smmu 0x26 0x1>,
+		    <0x80 &smmu 0x24 0x1>,
+		    <0xc0 &smmu 0x27 0x1>;
+};
+
+&netc_emdio {
+	pinctrl-0 = <&pinctrl_emdio>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 0 GPIO_ACTIVE_LOW>;
+	};
+
+	ethphy1: ethernet-phy@2 {
+		reg = <2>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <80000>;
+		reset-gpios = <&pcal6524 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&netc_timer {
+	status = "okay";
+};
+
+&netcmix_blk_ctrl {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pinctrl_pcie0>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	supports-clkreq;
+	vpcie-supply = <&reg_m2_mkey_pwr>;
+	status = "okay";
+};
+
+&scmi_iomuxc {
+	pinctrl_emdio: emdiogrp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC		0x50e
+			IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
+		>;
+	};
+
+	pinctrl_enetc0: enetc0grp {
+		fsl,pins = <
+			IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e
+			IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e
+			IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e
+			IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e
+			IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e
+			IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e
+			IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e
+			IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_enetc1: enetc1grp {
+		fsl,pins = <
+			IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e
+			IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e
+			IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e
+			IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e
+			IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e
+			IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK	0x58e
+			IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e
+			IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK	0x58e
+			IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e
+			IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e
+			IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e
+			IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO25__CAN2_TX				0x39e
+			IMX95_PAD_GPIO_IO27__CAN2_RX				0x39e
+		>;
+	};
+
+	pinctrl_flexcan5: flexcan5grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO22__CAN5_TX				0x39e
+			IMX95_PAD_GPIO_IO23__CAN5_RX				0x39e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			IMX95_PAD_I2C1_SCL__AONMIX_TOP_LPI2C1_SCL		0x40000b9e
+			IMX95_PAD_I2C1_SDA__AONMIX_TOP_LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL		0x40000b9e
+			IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO28__LPI2C3_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO29__LPI2C3_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c4: lpi2c4grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO30__LPI2C4_SDA				0x40000b9e
+			IMX95_PAD_GPIO_IO31__LPI2C4_SCL				0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO34__GPIO5_IO_BIT14			0x31e
+		>;
+	};
+
+	pinctrl_pcie0: pcie0grp {
+		fsl,pins = <
+			IMX95_PAD_GPIO_IO32__HSIOMIX_TOP_PCIE1_CLKREQ_B		0x40000b1e
+			IMX95_PAD_GPIO_IO33__GPIO5_IO_BIT13			0x31e
+		>;
+	};
+
+	pinctrl_pdm: pdmgrp {
+		fsl,pins = <
+			IMX95_PAD_PDM_CLK__AONMIX_TOP_PDM_CLK				0x31e
+			IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_PDM_BIT_STREAM_BIT0	0x31e
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110grp {
+		fsl,pins = <
+			IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7			0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX		0x31e
+			IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			IMX95_PAD_DAP_TDO_TRACESWO__LPUART5_TX			0x31e
+			IMX95_PAD_DAP_TDI__LPUART5_RX				0x31e
+			IMX95_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B			0x31e
+			IMX95_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B			0x31e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x158e
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x138e
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x138e
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x138e
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x138e
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x138e
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x138e
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x138e
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x138e
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x138e
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD1_CLK__USDHC1_CLK				0x15fe
+			IMX95_PAD_SD1_CMD__USDHC1_CMD				0x13fe
+			IMX95_PAD_SD1_DATA0__USDHC1_DATA0			0x13fe
+			IMX95_PAD_SD1_DATA1__USDHC1_DATA1			0x13fe
+			IMX95_PAD_SD1_DATA2__USDHC1_DATA2			0x13fe
+			IMX95_PAD_SD1_DATA3__USDHC1_DATA3			0x13fe
+			IMX95_PAD_SD1_DATA4__USDHC1_DATA4			0x13fe
+			IMX95_PAD_SD1_DATA5__USDHC1_DATA5			0x13fe
+			IMX95_PAD_SD1_DATA6__USDHC1_DATA6			0x13fe
+			IMX95_PAD_SD1_DATA7__USDHC1_DATA7			0x13fe
+			IMX95_PAD_SD1_STROBE__USDHC1_STROBE			0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
+			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x158e
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x138e
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x138e
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x138e
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x138e
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x138e
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			IMX95_PAD_SD3_CLK__USDHC3_CLK				0x15fe
+			IMX95_PAD_SD3_CMD__USDHC3_CMD				0x13fe
+			IMX95_PAD_SD3_DATA0__USDHC3_DATA0			0x13fe
+			IMX95_PAD_SD3_DATA1__USDHC3_DATA1			0x13fe
+			IMX95_PAD_SD3_DATA2__USDHC3_DATA2			0x13fe
+			IMX95_PAD_SD3_DATA3__USDHC3_DATA3			0x13fe
+		>;
+	};
+};
+
+&scmi_misc {
+	nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE		1
+			BRD_SM_CTRL_PCIE1_WAKE		1
+			BRD_SM_CTRL_BT_WAKE		1
+			BRD_SM_CTRL_PCIE2_WAKE		1
+			BRD_SM_CTRL_BUTTON		1>;
+};
+
+&thermal_zones {
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				cooling-device = <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				trip = <&pf5301_alert>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+};
+
+&usb2 {
+	disable-over-current;
+	dr_mode = "host";
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+	snps,dis-u1-entry-quirk;
+	snps,dis-u2-entry-quirk;
+	status = "okay";
+
+	port {
+		usb3_data_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usb3_phy {
+	orientation-switch;
+	fsl,phy-pcs-tx-deemph-3p5db-attenuation-db = <17>;
+	fsl,phy-pcs-tx-swing-full-percent = <100>;
+	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
+	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
+	status = "okay";
+
+	port {
+		usb3_data_ss: endpoint {
+			remote-endpoint = <&typec_con_ss>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	no-sd;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc1>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	fsl,tuning-step = <1>;
+	status = "okay";
+};
+
+&usdhc3 {
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-3 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	wakeup-source;
+	status = "okay";
+};
+
+&wdog3 {
+	status = "okay";
+};

-- 
2.34.1

Re: [PATCH v3 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board

[Krzysztof Kozlowski]

On 16/01/2026 09:56, Lei Xu wrote:
> Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM
> development board, a compact and cost-effective platform based on
> the i.MX95 applications processor.
> 
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> Signed-off-by: Lei Xu <lei.xu@nxp.com>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> index 68a2d5fecc43..4b6188d39be6 100644
> --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> @@ -1432,6 +1432,7 @@ properties:
>          items:
>            - enum:
>                - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
> +              - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board

It's always surprising how many people need to review such one liners,
but for more complex patches from NXP there are no reviews happening...

Best regards,
Krzysztof

Re: [PATCH v3 1/2] dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board

[Daniel Baluta]

On Fri, Jan 16, 2026 at 11:36 AM Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> On 16/01/2026 09:56, Lei Xu wrote:
> > Introduce a new DT compatible string for the NXP i.MX95 15x15 FRDM
> > development board, a compact and cost-effective platform based on
> > the i.MX95 applications processor.
> >
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
> > Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> > Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
> > Signed-off-by: Lei Xu <lei.xu@nxp.com>
> > ---
> >  Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
> >  1 file changed, 1 insertion(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index 68a2d5fecc43..4b6188d39be6 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -1432,6 +1432,7 @@ properties:
> >          items:
> >            - enum:
> >                - fsl,imx95-15x15-evk       # i.MX95 15x15 EVK Board
> > +              - fsl,imx95-15x15-frdm      # i.MX95 15x15 FRDM Board
>
> It's always surprising how many people need to review such one liners,
> but for more complex patches from NXP there are no reviews happening...
>

Krzysztof we are just warming up.

Re: [PATCH v3 0/2] Add device tree support for NXP i.MX95 15x15 FRDM board

[Shawn Guo]

On Fri, Jan 16, 2026 at 12:56:12AM -0800, Lei Xu wrote:
> The NXP i.MX95 15x15 FRDM board is a compact and cost-effective
> development board based on the i.MX95 applications processor.
> 
> This patch set adds device tree support for the board:
>  - Patch 1 introduces the DT compatible string.
>  - Patch 2 provides the complete device tree description.
> 
> Signed-off-by: Lei Xu <lei.xu@nxp.com>
> ---
> Changes in v3:
> - Add a blank line between the cpu and codec node definitions.
> - Link to v2: https://lore.kernel.org/r/20251217-127-v2-0-67cb12e56242@nxp.com
> 
> Changes in v2:
> - Switched from 'xceiver-supply' to CAN PHY nodes using 'phys'.
> - Added CAN PHY nodes for flexcan2/5 with shared silent-gpio, removed reg_can_stby.
> - Updated MSI/IOMMU mapping comment to match the i.MX95 15x15 FRDM board.
> 
> Link to v1: https://lore.kernel.org/r/20251207-127-v1-0-5a2eeb69f150@nxp.com
> 
> ---
> Lei Xu (2):
>       dt-bindings: arm: fsl: Add compatible for i.MX95 15x15 FRDM board
>       arm64: dts: freescale: imx95: Add support for i.MX95 15x15 FRDM board

Applied both, thanks!