[PATCH v5 0/6] i2c: xiic: use generic device property accessors

[PATCH v5 0/6] i2c: xiic: use generic device property accessors

[Abdurrahman Hussain via B4 Relay]

Switch to generic device property accessors.

Switch to managed devm_ functions to simplify error handling.

Make the clock optional since the driver is designed to operate without
explicit configuration in firmware thus making it useful on platforms
where clock is not or cannot be provided.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
Changes in v5:
- Reorder the cosmetic patch to be the last in the series.
- Added a documentation patch to describe the optional clock.
- Minor commit body rewording.
- Link to v4: https://lore.kernel.org/r/20260123-i2c-xiic-v4-0-4a3eba3510ce@nexthop.ai

Changes in v4:
- Reorder the cosmetic patch to be the first in the series.
- Amend the mutex_init patch to also switch to the managed pm_runtime_
  variant.
- Link to v3: https://lore.kernel.org/r/20260123-i2c-xiic-v3-0-eb7cd4254dfb@nexthop.ai

Changes in v3:
- Reorder the "optional clock" patch to be the first in the series. 
- Add a patch to switch to devm_mutex_init().
- Remove dup message in error path.
- Cosmetic: use temporary dev variable.
- Link to v2: https://lore.kernel.org/r/20260122-i2c-xiic-v2-0-134f5d743e8b@nexthop.ai

Changes in v2:
- Split the patch into two independent changes.
- Added struct device *dev at the top of probe() and remove() to re-use.
- Switched to device_set_node(...)

---
Abdurrahman Hussain (6):
      dt-bindings: i2c: xiic: make clocks optional
      i2c: xiic: make the clock optional
      i2c: xiic: switch to devres managed APIs
      i2c: xiic: remove duplicate error message
      i2c: xiic: switch to generic device property accessors
      i2c: xiic: cosmetic cleanup

 .../bindings/i2c/xlnx,xps-iic-2.00.a.yaml          |  1 -
 drivers/i2c/busses/i2c-xiic.c                      | 81 +++++++++-------------
 2 files changed, 34 insertions(+), 48 deletions(-)
---
base-commit: 24d479d26b25bce5faea3ddd9fa8f3a6c3129ea7
change-id: 20260122-i2c-xiic-3ba89ff5ea93

Best regards,
-- 
Abdurrahman Hussain <abdurrahman@nexthop.ai>

[PATCH v5 1/6] dt-bindings: i2c: xiic: make clocks optional

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

The xiic driver is designed to operate without explicit clock configuration
when clocks are not specified in the firmware.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
index 658ae92fa86d..cc500130f41f 100644
--- a/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
+++ b/Documentation/devicetree/bindings/i2c/xlnx,xps-iic-2.00.a.yaml
@@ -43,7 +43,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - clocks
 
 unevaluatedProperties: false
 

-- 
2.52.0

[PATCH v5 2/6] i2c: xiic: make the clock optional

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

The xiic driver is designed to operate without explicit clock configuration
when clocks are not specified in the firmware. This functionality is
already implemented in xiic_setclk(), which performs an early return when
either i2c_clk or input_clk are zero:

This condition is satisfied when clocks are missing, as clk_get_rate(NULL)
returns zero, allowing the driver to rely on hardware-configured timing.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 28015d77599d..16202fb89271 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1423,6 +1423,7 @@ MODULE_DEVICE_TABLE(of, xiic_of_match);
 
 static int xiic_i2c_probe(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct xiic_i2c *i2c;
 	struct xiic_i2c_platform_data *pdata;
 	const struct of_device_id *match;
@@ -1464,7 +1465,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	mutex_init(&i2c->lock);
 	spin_lock_init(&i2c->atomic_lock);
 
-	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
 				     "failed to enable input clock.\n");

-- 
2.52.0

[PATCH v5 3/6] i2c: xiic: switch to devres managed APIs

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

Simplify the error code paths by switching to devres managed helper
functions.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 16202fb89271..a4a8087c1407 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1462,7 +1462,10 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
 		 DRIVER_NAME " %s", pdev->name);
 
-	mutex_init(&i2c->lock);
+	ret = devm_mutex_init(dev, &i2c->lock);
+	if (ret < 0)
+		return ret;
+
 	spin_lock_init(&i2c->atomic_lock);
 
 	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
@@ -1473,8 +1476,9 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c->dev = &pdev->dev;
 	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(i2c->dev);
-	pm_runtime_set_active(i2c->dev);
-	pm_runtime_enable(i2c->dev);
+	ret = devm_pm_runtime_set_active_enabled(dev);
+	if (ret < 0)
+		return ret;
 
 	/* SCL frequency configuration */
 	i2c->input_clk = clk_get_rate(i2c->clk);
@@ -1490,7 +1494,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	if (ret < 0) {
 		dev_err_probe(&pdev->dev, ret, "Cannot claim IRQ\n");
-		goto err_pm_disable;
+		return ret;
 	}
 
 	i2c->singlemaster =
@@ -1511,14 +1515,14 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	ret = xiic_reinit(i2c);
 	if (ret < 0) {
 		dev_err_probe(&pdev->dev, ret, "Cannot xiic_reinit\n");
-		goto err_pm_disable;
+		return ret;
 	}
 
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret) {
 		xiic_deinit(i2c);
-		goto err_pm_disable;
+		return ret;
 	}
 
 	if (pdata) {
@@ -1530,12 +1534,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	dev_dbg(&pdev->dev, "mmio %08lx irq %d scl clock frequency %d\n",
 		(unsigned long)res->start, irq, i2c->i2c_clk);
 
-	return 0;
-
-err_pm_disable:
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
-
 	return ret;
 }
 
@@ -1556,8 +1554,6 @@ static void xiic_i2c_remove(struct platform_device *pdev)
 		xiic_deinit(i2c);
 
 	pm_runtime_put_sync(i2c->dev);
-	pm_runtime_disable(&pdev->dev);
-	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 }
 

-- 
2.52.0

[PATCH v5 4/6] i2c: xiic: remove duplicate error message

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

The devm_request_threaded_irq() already prints an error message. Remove
the duplicate.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index a4a8087c1407..a06597bbf6fc 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1492,10 +1492,8 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 					xiic_process, IRQF_ONESHOT,
 					pdev->name, i2c);
 
-	if (ret < 0) {
-		dev_err_probe(&pdev->dev, ret, "Cannot claim IRQ\n");
+	if (ret < 0)
 		return ret;
-	}
 
 	i2c->singlemaster =
 		of_property_read_bool(pdev->dev.of_node, "single-master");

-- 
2.52.0

[PATCH v5 5/6] i2c: xiic: switch to generic device property accessors

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

Use generic device property accessors.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 25 ++++++++-----------------
 1 file changed, 8 insertions(+), 17 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index a06597bbf6fc..09a4b532d55d 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -27,7 +27,6 @@
 #include <linux/platform_data/i2c-xiic.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/of.h>
 #include <linux/clk.h>
 #include <linux/pm_runtime.h>
 #include <linux/iopoll.h>
@@ -1408,7 +1407,6 @@ static const struct i2c_adapter xiic_adapter = {
 	.algo = &xiic_algorithm,
 };
 
-#if defined(CONFIG_OF)
 static const struct xiic_version_data xiic_2_00 = {
 	.quirks = DYNAMIC_MODE_READ_BROKEN_BIT,
 };
@@ -1419,14 +1417,13 @@ static const struct of_device_id xiic_of_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, xiic_of_match);
-#endif
 
 static int xiic_i2c_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct xiic_i2c *i2c;
 	struct xiic_i2c_platform_data *pdata;
-	const struct of_device_id *match;
+	const struct xiic_version_data *data;
 	struct resource *res;
 	int ret, irq;
 	u8 i;
@@ -1436,12 +1433,9 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
-	match = of_match_node(xiic_of_match, pdev->dev.of_node);
-	if (match && match->data) {
-		const struct xiic_version_data *data = match->data;
-
+	data = device_get_match_data(dev);
+	if (data)
 		i2c->quirks = data->quirks;
-	}
 
 	i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(i2c->base))
@@ -1458,7 +1452,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	i2c->adap = xiic_adapter;
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &pdev->dev;
-	i2c->adap.dev.of_node = pdev->dev.of_node;
+	device_set_node(&i2c->adap.dev, dev_fwnode(dev));
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
 		 DRIVER_NAME " %s", pdev->name);
 
@@ -1482,21 +1476,18 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	/* SCL frequency configuration */
 	i2c->input_clk = clk_get_rate(i2c->clk);
-	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
-				   &i2c->i2c_clk);
+	ret = device_property_read_u32(dev, "clock-frequency", &i2c->i2c_clk);
 	/* If clock-frequency not specified in DT, do not configure in SW */
 	if (ret || i2c->i2c_clk > I2C_MAX_FAST_MODE_PLUS_FREQ)
 		i2c->i2c_clk = 0;
 
-	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
-					xiic_process, IRQF_ONESHOT,
-					pdev->name, i2c);
+	ret = devm_request_threaded_irq(dev, irq, NULL, xiic_process,
+					IRQF_ONESHOT, pdev->name, i2c);
 
 	if (ret < 0)
 		return ret;
 
-	i2c->singlemaster =
-		of_property_read_bool(pdev->dev.of_node, "single-master");
+	i2c->singlemaster = device_property_read_bool(dev, "single-master");
 
 	/*
 	 * Detect endianness

-- 
2.52.0

[PATCH v5 6/6] i2c: xiic: cosmetic cleanup

[Abdurrahman Hussain via B4 Relay]

From: Abdurrahman Hussain <abdurrahman@nexthop.ai>

Re-use dev pointer instead of referencing &pdev->dev everywhere.

Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
---
 drivers/i2c/busses/i2c-xiic.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 09a4b532d55d..3537c97e307a 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -1429,7 +1429,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	u8 i;
 	u32 sr;
 
-	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	i2c = devm_kzalloc(dev, sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;
 
@@ -1445,13 +1445,13 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	pdata = dev_get_platdata(&pdev->dev);
+	pdata = dev_get_platdata(dev);
 
 	/* hook up driver to tree */
 	platform_set_drvdata(pdev, i2c);
 	i2c->adap = xiic_adapter;
 	i2c_set_adapdata(&i2c->adap, i2c);
-	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.parent = dev;
 	device_set_node(&i2c->adap.dev, dev_fwnode(dev));
 	snprintf(i2c->adap.name, sizeof(i2c->adap.name),
 		 DRIVER_NAME " %s", pdev->name);
@@ -1464,12 +1464,12 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	i2c->clk = devm_clk_get_optional_enabled(dev, NULL);
 	if (IS_ERR(i2c->clk))
-		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
+		return dev_err_probe(dev, PTR_ERR(i2c->clk),
 				     "failed to enable input clock.\n");
 
-	i2c->dev = &pdev->dev;
-	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
-	pm_runtime_use_autosuspend(i2c->dev);
+	i2c->dev = dev;
+	pm_runtime_set_autosuspend_delay(dev, XIIC_PM_TIMEOUT);
+	pm_runtime_use_autosuspend(dev);
 	ret = devm_pm_runtime_set_active_enabled(dev);
 	if (ret < 0)
 		return ret;
@@ -1503,7 +1503,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	ret = xiic_reinit(i2c);
 	if (ret < 0) {
-		dev_err_probe(&pdev->dev, ret, "Cannot xiic_reinit\n");
+		dev_err_probe(dev, ret, "Cannot xiic_reinit\n");
 		return ret;
 	}
 
@@ -1528,22 +1528,23 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 static void xiic_i2c_remove(struct platform_device *pdev)
 {
+	struct device *dev = &pdev->dev;
 	struct xiic_i2c *i2c = platform_get_drvdata(pdev);
 	int ret;
 
 	/* remove adapter & data */
 	i2c_del_adapter(&i2c->adap);
 
-	ret = pm_runtime_get_sync(i2c->dev);
+	ret = pm_runtime_get_sync(dev);
 
 	if (ret < 0)
-		dev_warn(&pdev->dev, "Failed to activate device for removal (%pe)\n",
+		dev_warn(dev, "Failed to activate device for removal (%pe)\n",
 			 ERR_PTR(ret));
 	else
 		xiic_deinit(i2c);
 
-	pm_runtime_put_sync(i2c->dev);
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_put_sync(dev);
+	pm_runtime_dont_use_autosuspend(dev);
 }
 
 static const struct dev_pm_ops xiic_dev_pm_ops = {

-- 
2.52.0

Re: [PATCH v5 3/6] i2c: xiic: switch to devres managed APIs

[Andy Shevchenko]

On Mon, Jan 26, 2026 at 05:08:18PM +0000, Abdurrahman Hussain via B4 Relay wrote:

> Simplify the error code paths by switching to devres managed helper
> functions.

Thanks for the update, my comments below.

...

> +	ret = devm_mutex_init(dev, &i2c->lock);
> +	if (ret < 0)

Why ' < 0'?

> +		return ret;

...

> +	ret = devm_pm_runtime_set_active_enabled(dev);
> +	if (ret < 0)

Ditto.

> +		return ret;

...

>  	if (ret < 0) {
>  		dev_err_probe(&pdev->dev, ret, "Cannot claim IRQ\n");
> -		goto err_pm_disable;
> +		return ret;

		return dev_err_probe(...);

>  	}

...

>  	ret = xiic_reinit(i2c);
>  	if (ret < 0) {
>  		dev_err_probe(&pdev->dev, ret, "Cannot xiic_reinit\n");

Ditto.

> -		goto err_pm_disable;
> +		return ret;
>  	}

...

>  	dev_dbg(&pdev->dev, "mmio %08lx irq %d scl clock frequency %d\n",
>  		(unsigned long)res->start, irq, i2c->i2c_clk);

Side note, consider using %pR instead of ugly casting for resources.
(separate change).

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 2/6] i2c: xiic: make the clock optional

[Andy Shevchenko]

On Mon, Jan 26, 2026 at 05:08:17PM +0000, Abdurrahman Hussain via B4 Relay wrote:

> The xiic driver is designed to operate without explicit clock configuration
> when clocks are not specified in the firmware. This functionality is
> already implemented in xiic_setclk(), which performs an early return when
> either i2c_clk or input_clk are zero:
> 
> This condition is satisfied when clocks are missing, as clk_get_rate(NULL)
> returns zero, allowing the driver to rely on hardware-configured timing.

Bingo!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 4/6] i2c: xiic: remove duplicate error message

[Andy Shevchenko]

On Mon, Jan 26, 2026 at 05:08:19PM +0000, Abdurrahman Hussain via B4 Relay wrote:

> The devm_request_threaded_irq() already prints an error message. Remove
> the duplicate.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 3/6] i2c: xiic: switch to devres managed APIs

[Andy Shevchenko]

On Tue, Jan 27, 2026 at 11:35:38AM +0200, Andy Shevchenko wrote:
> On Mon, Jan 26, 2026 at 05:08:18PM +0000, Abdurrahman Hussain via B4 Relay wrote:

...

> >  	if (ret < 0) {
> >  		dev_err_probe(&pdev->dev, ret, "Cannot claim IRQ\n");
> > -		goto err_pm_disable;
> > +		return ret;
> 
> 		return dev_err_probe(...);

Actually you are right as here we remove the message in the next patch,
so discard my previous comment.

> >  	}

...

> >  	ret = xiic_reinit(i2c);
> >  	if (ret < 0) {
> >  		dev_err_probe(&pdev->dev, ret, "Cannot xiic_reinit\n");
> 
> Ditto.
> 
> > -		goto err_pm_disable;
> > +		return ret;

But here it will stay, so

		return dev_err_probe(dev, ret, "Cannot xiic_reinit\n");

> >  	}

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 5/6] i2c: xiic: switch to generic device property accessors

[Andy Shevchenko]

On Mon, Jan 26, 2026 at 05:08:20PM +0000, Abdurrahman Hussain via B4 Relay wrote:

> Use generic device property accessors.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>

One nit-pick below.

...

> -	ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> -					xiic_process, IRQF_ONESHOT,
> -					pdev->name, i2c);
> +	ret = devm_request_threaded_irq(dev, irq, NULL, xiic_process,
> +					IRQF_ONESHOT, pdev->name, i2c);

>  

Also drop this blank line.

>  	if (ret < 0)
>  		return ret;

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 6/6] i2c: xiic: cosmetic cleanup

[Andy Shevchenko]

On Mon, Jan 26, 2026 at 05:08:21PM +0000, Abdurrahman Hussain via B4 Relay wrote:

> Re-use dev pointer instead of referencing &pdev->dev everywhere.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
A couple of nit-picks to be addressed though.

...

> -	i2c->dev = &pdev->dev;
> -	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
> -	pm_runtime_use_autosuspend(i2c->dev);
> +	i2c->dev = dev;

+ blank line here.

> +	pm_runtime_set_autosuspend_delay(dev, XIIC_PM_TIMEOUT);
> +	pm_runtime_use_autosuspend(dev);
>  	ret = devm_pm_runtime_set_active_enabled(dev);
>  	if (ret < 0)
>  		return ret;

...

>  	ret = xiic_reinit(i2c);
>  	if (ret < 0) {
> -		dev_err_probe(&pdev->dev, ret, "Cannot xiic_reinit\n");
> +		dev_err_probe(dev, ret, "Cannot xiic_reinit\n");
>  		return ret;
>  	}

It should be integrated in the second patch or so, I have already commented on
that.

...

> -	ret = pm_runtime_get_sync(i2c->dev);
> +	ret = pm_runtime_get_sync(dev);

>  

Drop this blank line as well.

>  	if (ret < 0)
> -		dev_warn(&pdev->dev, "Failed to activate device for removal (%pe)\n",
> +		dev_warn(dev, "Failed to activate device for removal (%pe)\n",
>  			 ERR_PTR(ret));
>  	else
>  		xiic_deinit(i2c);

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v5 0/6] i2c: xiic: use generic device property accessors

[Andy Shevchenko]

On Mon, Jan 26, 2026 at 05:08:15PM +0000, Abdurrahman Hussain via B4 Relay wrote:
> Switch to generic device property accessors.
> 
> Switch to managed devm_ functions to simplify error handling.
> 
> Make the clock optional since the driver is designed to operate without
> explicit configuration in firmware thus making it useful on platforms
> where clock is not or cannot be provided.

Overall looks good, needs some nit-picks to be addressed.
I hope v6 will manage to go in soon.

-- 
With Best Regards,
Andy Shevchenko