Re: [PATCH v7 1/5] dt-bindings: arm: fsl: Add GOcontroll Moduline IV/Mini

[Frank Li <Frank.li@nxp.com>]

On Thu, Feb 12, 2026 at 12:47:04PM +0100, Maud Spierings wrote:
> On 2/10/26 09:45, Maud Spierings via B4 Relay wrote:
> > From: Maud Spierings <maudspierings@gocontroll.com>
> >
> > Document the compatible strings for the Moduline IV and Mini.
> > Also add a compatible for the Ka-Ro Electronics TX8M-1610 SoM that they
> > are based on.
> >
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
> > Signed-off-by: Maud Spierings <maudspierings@gocontroll.com>
> > ---
> >   Documentation/devicetree/bindings/arm/fsl.yaml | 8 ++++++++
> >   1 file changed, 8 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
> > index 5716d701292c..c76c1731b4f7 100644
> > --- a/Documentation/devicetree/bindings/arm/fsl.yaml
> > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml
> > @@ -996,6 +996,14 @@ properties:
> >             - const: engicam,icore-mx8mm             # i.MX8MM Engicam i.Core MX8M Mini SoM
> >             - const: fsl,imx8mm
> > +      - description: Ka-Ro Electronics TX8M-1610 based boards
> > +        items:
> > +          - enum:
> > +              - gocontroll,moduline-iv-306-d
> > +              - gocontroll,moduline-mini-111
> > +          - const: karo,imx8mm-tx8m-1610
>
> I just realised that I did karo,tx8p-ml81 for the imx8mp module, doubting if
> I should change this to karo,tx8m-1610.
>
> This inconsistency is now bothering me.

It is up to you. both is okay for me

Frank
>
> Kind regards,
> Maud
>
> > +          - const: fsl,imx8mm
> > +
> >         - description: Kontron BL i.MX8MM (N801X S) Board
> >           items:
> >             - const: kontron,imx8mm-bl
> >
>