Re: [PATCH] remoteproc: imx_rproc: Check return value of regmap_attach_dev() in imx_rproc_mmio_detect_mode()

[Mathieu Poirier <mathieu.poirier@linaro.org>]

On Fri, Feb 06, 2026 at 03:34:41AM +0000, Peng Fan wrote:
> > Subject: [PATCH] remoteproc: imx_rproc: Check return value of
> > regmap_attach_dev() in imx_rproc_mmio_detect_mode()
> > 
> > Add error checking for regmap_attach_dev() call in
> > imx_rproc_mmio_detect_mode() function to ensure proper error
> > propagation.
> > 
> > Return the value of regmap_attach_dev() if it fails to prevent
> > proceeding with an incomplete regmap setup.
> > 
> > Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
> > ---
> >  drivers/remoteproc/imx_rproc.c | 4 +++-
> >  1 file changed, 3 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/remoteproc/imx_rproc.c
> > b/drivers/remoteproc/imx_rproc.c index f5f916d67905..0e23f519c247
> > 100644
> > --- a/drivers/remoteproc/imx_rproc.c
> > +++ b/drivers/remoteproc/imx_rproc.c
> > @@ -1007,7 +1007,9 @@ static int
> > imx_rproc_mmio_detect_mode(struct rproc *rproc)
> >  	}
> > 
> >  	priv->regmap = regmap;
> > -	regmap_attach_dev(dev, regmap, &config);
> > +	ret = regmap_attach_dev(dev, regmap, &config);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "regmap attach
> > failed\n");
> 
> 
> In the main probe, there is already dev_err_probe for
> detect_mode. So I would use below style as other error
> return in imx_rproc_mmio_detect_mode():
> dev_err("regmap attach failed\n");
> return ret;
> 
> Let's wait Mathieu's view.
>

I agreew with Peng's assessment.
 
> Regards
> Peng.
> 
> > 
> >  	if (priv->gpr) {
> >  		ret = regmap_read(priv->gpr, dcfg->gpr_reg, &val);
> > --
> > 2.25.1
> > 
>