Re: [PATCH] arm64: dts: freescale: imx8mp-tqma8mpql-mba8mp-ras314: fix UART1 RTS/CTS muxing

[Frank Li <Frank.li@nxp.com>]

On Wed, Feb 25, 2026 at 09:34:18AM +0100, Nora Schiffer wrote:
> The pinmuxing for UART1 was mixing DCE and DTE modes, which cannot work.
> Consistently use DCE mode.
>
> This switches the RTS and CTS pins, which is fine for this board, as
> UART1 is routed to a pin header.

Is below commit better?

UART1 operates in DCE mode, but the RTS/CTS pins were incorrectly
configured using the DTE pinmux setting.

Correct the pinmux to match DCE mode, which does not affect existing
functionality because UART1 signals are routed to a pin header.

Frank
>
> Fixes: ddabb3ce3f90 ("arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314")
> Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
> ---
>  .../boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts     | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
> index b7f69c92b7748..1665a5030b993 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
> @@ -848,8 +848,8 @@ pinctrl_tlv320aic3x04: tlv320aic3x04grp {
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <MX8MP_IOMUXC_SAI2_RXFS__UART1_DCE_TX	0x14>,
>  			   <MX8MP_IOMUXC_SAI2_RXC__UART1_DCE_RX		0x14>,
> -			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DTE_CTS	0x14>,
> -			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DTE_RTS	0x14>;
> +			   <MX8MP_IOMUXC_SAI2_RXD0__UART1_DCE_RTS	0x14>,
> +			   <MX8MP_IOMUXC_SAI2_TXFS__UART1_DCE_CTS	0x14>;
>  	};
>
>  	pinctrl_uart1_gpio: uart1gpiogrp {
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> https://www.tq-group.com/
>