From mboxrd@z Thu Jan 1 00:00:00 1970 From: michal.simek@xilinx.com (Michal Simek) Date: Fri, 23 Sep 2016 10:37:05 +0200 Subject: [PATCH v2] arm: dts: zynq: Add MicroZed board support In-Reply-To: References: <1474550489-7005-1-git-send-email-jagan@amarulasolutions.com> <20160922205917.GS16583@xsjsorenbubuntu> <4a586da6-8d94-bfbe-ea0c-58b6f8573e7b@xilinx.com> Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 23.9.2016 09:39, Jagan Teki wrote: > On Fri, Sep 23, 2016 at 11:33 AM, Michal Simek wrote: >> On 22.9.2016 22:59, S?ren Brinkmann wrote: >>> On Thu, 2016-09-22 at 18:51:29 +0530, Jagan Teki wrote: >>>> From: Jagan Teki >>>> >>>> Added basic dts support for MicroZed board. >>>> >>>> - UART >>>> - SDHCI >>>> - Ethernet >>>> >>>> Cc: Soren Brinkmann >>>> Cc: Michal Simek >>>> Signed-off-by: Jagan Teki >>>> --- >>>> Changes for v2: >>>> - Add SDHCI >>>> - Add Ethernet >>>> >>>> arch/arm/boot/dts/Makefile | 1 + >>>> arch/arm/boot/dts/zynq-microzed.dts | 95 +++++++++++++++++++++++++++++++++++++ >>>> 2 files changed, 96 insertions(+) >>>> create mode 100644 arch/arm/boot/dts/zynq-microzed.dts >>>> >>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>>> index faacd52..4d7b858 100644 >>>> --- a/arch/arm/boot/dts/Makefile >>>> +++ b/arch/arm/boot/dts/Makefile >>>> @@ -862,6 +862,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \ >>>> wm8750-apc8750.dtb \ >>>> wm8850-w70v2.dtb >>>> dtb-$(CONFIG_ARCH_ZYNQ) += \ >>>> + zynq-microzed.dtb \ >>>> zynq-parallella.dtb \ >>>> zynq-zc702.dtb \ >>>> zynq-zc706.dtb \ >>>> diff --git a/arch/arm/boot/dts/zynq-microzed.dts b/arch/arm/boot/dts/zynq-microzed.dts >>>> new file mode 100644 >>>> index 0000000..9e64496 >>>> --- /dev/null >>>> +++ b/arch/arm/boot/dts/zynq-microzed.dts >>>> @@ -0,0 +1,95 @@ >>>> +/* >>>> + * Copyright (C) 2015 Jagan Teki >> >> >> Did you created only yourself without copying part of this from others? >> There is dts in u-boot which I believe you are aware of. > > I sent the initial one few months back so at that time, I was created > and now I just added USB and Ethernet with the reference of zc702 > board. Can you send me a link to that post? I didn't find it. Anyway you should keep Xilinx copyright there. Thanks, Michal