Re: [PATCH v2] iio: adc: stm32-adc: Fix race in installing chained IRQ handler

[Fabrice Gasnier <fabrice.gasnier@foss.st.com>]

On 5/25/25 13:07, Jonathan Cameron wrote:
> On Thu, 15 May 2025 11:26:56 +0100
> Nuno Sá <noname.nuno@gmail.com> wrote:
> 
>> On Thu, 2025-05-15 at 16:31 +0800, Chen Ni wrote:
>>> Fix a race where a pending interrupt could be received and the handler
>>> called before the handler's data has been setup, by converting to
>>> irq_set_chained_handler_and_data().
>>>
>>> Fixes: d58c67d1d851 ("iio: adc: stm32-adc: add support for STM32MP1")
>>> Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
>>> ---  
>>
>> Reviewed-by: Nuno Sá <nuno.sa@analog.com>
> Looks good to me and I've queued it up for after rc1.  If any
> ST folk have time to take a look that would be great.

Hi Jonathan,

One minor comment at my end, not sure if that changes a lot...
This could be a fix for the older commit:
1add69880240 ("iio: adc: Add support for STM32 ADC core")

Apart from that, you can add my:
Tested-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>

BR,
Fabrice

> 
> Jonathan
> 
>>
>>> Changelog:
>>>
>>> v1 -> v2:
>>>
>>> 1. Add Fixes tag.
>>> ---
>>>  drivers/iio/adc/stm32-adc-core.c | 7 +++----
>>>  1 file changed, 3 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/drivers/iio/adc/stm32-adc-core.c b/drivers/iio/adc/stm32-adc-
>>> core.c
>>> index bd3458965bff..21c04a98b3b6 100644
>>> --- a/drivers/iio/adc/stm32-adc-core.c
>>> +++ b/drivers/iio/adc/stm32-adc-core.c
>>> @@ -430,10 +430,9 @@ static int stm32_adc_irq_probe(struct platform_device
>>> *pdev,
>>>  		return -ENOMEM;
>>>  	}
>>>  
>>> -	for (i = 0; i < priv->cfg->num_irqs; i++) {
>>> -		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
>>> -		irq_set_handler_data(priv->irq[i], priv);
>>> -	}
>>> +	for (i = 0; i < priv->cfg->num_irqs; i++)
>>> +		irq_set_chained_handler_and_data(priv->irq[i],
>>> +						 stm32_adc_irq_handler,
>>> priv);
>>>  
>>>  	return 0;
>>>  }  
>