[PATCH net-next v9 2/6] net: stmmac: qcom-ethqos: use generic device properties

[PATCH net-next v9 2/6] net: stmmac: qcom-ethqos: use generic device properties

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

In order to drop the dependency on CONFIG_OF, convert all device property
getters from OF-specific to generic device properties and stop pulling
in any linux/of.h symbols.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig             | 2 +-
 drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 ++++-----
 2 files changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 07088d03dbab5bd1abf66e9460613b839c1d565e..e2af4fdd654340d618477ed87d3889dbb9aab456 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -135,7 +135,7 @@ config DWMAC_MESON
 config DWMAC_QCOM_ETHQOS
 	tristate "Qualcomm ETHQOS support"
 	default ARCH_QCOM
-	depends on OF && (ARCH_QCOM || COMPILE_TEST)
+	depends on ARCH_QCOM || COMPILE_TEST
 	help
 	  Support for the Qualcomm ETHQOS core.
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 3ccf20fdf52a8ec4649b43ade8ee7b85d613e1c5..66fd2ed2c2c8428694c07d89220d0e1608546791 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -1,8 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (c) 2018-19, Linaro Limited
 
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/of_net.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
@@ -728,7 +728,6 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	const struct ethqos_emac_driver_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
@@ -778,7 +777,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 		return dev_err_probe(dev, PTR_ERR(ethqos->rgmii_base),
 				     "Failed to map rgmii resource\n");
 
-	data = of_device_get_match_data(dev);
+	data = device_get_match_data(dev);
 	ethqos->rgmii_por = data->rgmii_por;
 	ethqos->num_rgmii_por = data->num_rgmii_por;
 	ethqos->rgmii_config_loopback_en = data->rgmii_config_loopback_en;
@@ -818,9 +817,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ethqos->has_emac_ge_3)
 		plat_dat->dwmac4_addrs = &data->dwmac4_addrs;
 	plat_dat->pmt = true;
-	if (of_property_read_bool(np, "snps,tso"))
+	if (device_property_present(dev, "snps,tso"))
 		plat_dat->flags |= STMMAC_FLAG_TSO_EN;
-	if (of_device_is_compatible(np, "qcom,qcs404-ethqos"))
+	if (device_is_compatible(dev, "qcom,qcs404-ethqos"))
 		plat_dat->flags |= STMMAC_FLAG_RX_CLK_RUNS_IN_LPI;
 	if (data->dma_addr_width)
 		plat_dat->host_dma_width = data->dma_addr_width;

-- 
2.47.3

[PATCH net-next v9 4/6] net: stmmac: qcom-ethqos: split power management fields into a separate structure

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Now that we have a separate wrapper for device match data, let's extend
this structure with a pointer to the structure containing fields related
to power-management only. This is done because a device may have the
same device settings but different power management mode (e.g.: firmware
vs manual).

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c   | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 8fda6c128117d7f5b1dece68c919f2a09a511210..cbfae18773c1193cd640f07824f5a66d68f9634b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -92,13 +92,17 @@ struct ethqos_emac_driver_data {
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
 	u8 dma_addr_width;
-	const char *link_clk_name;
 	struct dwmac4_addrs dwmac4_addrs;
 	bool needs_sgmii_loopback;
 };
 
+struct ethqos_emac_pm_data {
+	const char *link_clk_name;
+};
+
 struct ethqos_emac_match_data {
 	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_pm_data *pm_data;
 };
 
 struct qcom_ethqos {
@@ -301,7 +305,6 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	.num_rgmii_por = ARRAY_SIZE(emac_v4_0_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = true,
-	.link_clk_name = "phyaux",
 	.needs_sgmii_loopback = true,
 	.dma_addr_width = 36,
 	.dwmac4_addrs = {
@@ -322,8 +325,13 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	},
 };
 
+static const struct ethqos_emac_pm_data emac_sa8775p_pm_data = {
+	.link_clk_name = "phyaux",
+};
+
 static const struct ethqos_emac_match_data emac_sa8775p_data = {
 	.drv_data = &emac_v4_0_0_data,
+	.pm_data = &emac_sa8775p_pm_data,
 };
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -749,11 +757,13 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
 	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_pm_data *pm_data;
 	const struct ethqos_emac_match_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
 	struct device *dev = &pdev->dev;
 	struct qcom_ethqos *ethqos;
+	const char *clk_name;
 	int ret, i;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
@@ -800,13 +810,16 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 	data = device_get_match_data(dev);
 	drv_data = data->drv_data;
+	pm_data = data->pm_data;
+	clk_name = pm_data && pm_data->link_clk_name ? pm_data->link_clk_name : "rgmii";
+
 	ethqos->rgmii_por = drv_data->rgmii_por;
 	ethqos->num_rgmii_por = drv_data->num_rgmii_por;
 	ethqos->rgmii_config_loopback_en = drv_data->rgmii_config_loopback_en;
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
 
-	ethqos->link_clk = devm_clk_get(dev, drv_data->link_clk_name ?: "rgmii");
+	ethqos->link_clk = devm_clk_get(dev, clk_name);
 	if (IS_ERR(ethqos->link_clk))
 		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
 				     "Failed to get link_clk\n");

-- 
2.47.3

[PATCH net-next v9 5/6] net: stmmac: qcom-ethqos: split power management context into a separate struct

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

With match data split into general and power-management sections, let's
now do the same with runtime device data.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 40 ++++++++++++----------
 1 file changed, 22 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index cbfae18773c1193cd640f07824f5a66d68f9634b..f32ff0d9ce513d8270c8db9c549a79778549df59 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -105,14 +105,18 @@ struct ethqos_emac_match_data {
 	const struct ethqos_emac_pm_data *pm_data;
 };
 
+struct ethqos_emac_pm_ctx {
+	struct clk *link_clk;
+	struct phy *serdes_phy;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
 	void (*configure_func)(struct qcom_ethqos *ethqos,
 			       phy_interface_t interface, int speed);
 
-	struct clk *link_clk;
-	struct phy *serdes_phy;
+	struct ethqos_emac_pm_ctx pm;
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *rgmii_por;
@@ -194,7 +198,7 @@ static int ethqos_set_clk_tx_rate(void *bsp_priv, struct clk *clk_tx_i,
 	if (rate < 0)
 		return rate;
 
-	return clk_set_rate(ethqos->link_clk, rate * 2);
+	return clk_set_rate(ethqos->pm.link_clk, rate * 2);
 }
 
 static void
@@ -670,13 +674,13 @@ static int qcom_ethqos_serdes_powerup(struct net_device *ndev, void *priv)
 	struct qcom_ethqos *ethqos = priv;
 	int ret;
 
-	ret = phy_init(ethqos->serdes_phy);
+	ret = phy_init(ethqos->pm.serdes_phy);
 	if (ret)
 		return ret;
 
-	ret = phy_power_on(ethqos->serdes_phy);
+	ret = phy_power_on(ethqos->pm.serdes_phy);
 	if (ret)
-		phy_exit(ethqos->serdes_phy);
+		phy_exit(ethqos->pm.serdes_phy);
 
 	return ret;
 }
@@ -685,8 +689,8 @@ static void qcom_ethqos_serdes_powerdown(struct net_device *ndev, void *priv)
 {
 	struct qcom_ethqos *ethqos = priv;
 
-	phy_power_off(ethqos->serdes_phy);
-	phy_exit(ethqos->serdes_phy);
+	phy_power_off(ethqos->pm.serdes_phy);
+	phy_exit(ethqos->pm.serdes_phy);
 }
 
 static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
@@ -700,7 +704,7 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
 
 	if (interface == PHY_INTERFACE_MODE_SGMII ||
 	    interface == PHY_INTERFACE_MODE_2500BASEX)
-		ret = phy_set_mode_ext(ethqos->serdes_phy, PHY_MODE_ETHERNET,
+		ret = phy_set_mode_ext(ethqos->pm.serdes_phy, PHY_MODE_ETHERNET,
 				       interface);
 
 	return ret;
@@ -712,7 +716,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
 	int ret = 0;
 
 	if (enabled) {
-		ret = clk_prepare_enable(ethqos->link_clk);
+		ret = clk_prepare_enable(ethqos->pm.link_clk);
 		if (ret) {
 			dev_err(&ethqos->pdev->dev, "link_clk enable failed\n");
 			return ret;
@@ -726,7 +730,7 @@ static int ethqos_clks_config(void *priv, bool enabled)
 		qcom_ethqos_set_sgmii_loopback(ethqos, true);
 		ethqos_set_func_clk_en(ethqos);
 	} else {
-		clk_disable_unprepare(ethqos->link_clk);
+		clk_disable_unprepare(ethqos->pm.link_clk);
 	}
 
 	return ret;
@@ -819,9 +823,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
 
-	ethqos->link_clk = devm_clk_get(dev, clk_name);
-	if (IS_ERR(ethqos->link_clk))
-		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
+	ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
+	if (IS_ERR(ethqos->pm.link_clk))
+		return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
 				     "Failed to get link_clk\n");
 
 	ret = ethqos_clks_config(ethqos, true);
@@ -832,9 +836,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ethqos->serdes_phy = devm_phy_optional_get(dev, "serdes");
-	if (IS_ERR(ethqos->serdes_phy))
-		return dev_err_probe(dev, PTR_ERR(ethqos->serdes_phy),
+	ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
+	if (IS_ERR(ethqos->pm.serdes_phy))
+		return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
 				     "Failed to get serdes phy\n");
 
 	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
@@ -859,7 +863,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	if (drv_data->dma_addr_width)
 		plat_dat->host_dma_width = drv_data->dma_addr_width;
 
-	if (ethqos->serdes_phy) {
+	if (ethqos->pm.serdes_phy) {
 		plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
 		plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
 	}

-- 
2.47.3

[PATCH net-next v9 6/6] net: stmmac: qcom-ethqos: add support for sa8255p

[Bartosz Golaszewski]

Extend the driver to support a new model - sa8255p. Unlike the
previously supported variants, this one's power management is done in
the firmware using SCMI. This is modeled in linux using power domains so
add support for them.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 301 ++++++++++++++++++---
 1 file changed, 262 insertions(+), 39 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index f32ff0d9ce513d8270c8db9c549a79778549df59..09ce80b446cbac8bf85d974a3d6517e037b049c1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -7,6 +7,8 @@
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_domain.h>
 
 #include "stmmac.h"
 #include "stmmac_platform.h"
@@ -81,6 +83,13 @@
 
 #define SGMII_10M_RX_CLK_DVDR			0x31
 
+enum ethqos_pd_selector {
+	ETHQOS_PD_CORE = 0,
+	ETHQOS_PD_MDIO,
+	ETHQOS_PD_SERDES,
+	ETHQOS_NUM_PDS,
+};
+
 struct ethqos_emac_por {
 	unsigned int offset;
 	unsigned int value;
@@ -98,6 +107,9 @@ struct ethqos_emac_driver_data {
 
 struct ethqos_emac_pm_data {
 	const char *link_clk_name;
+	bool use_domains;
+	struct dev_pm_domain_attach_data pd;
+	unsigned int clk_ptp_rate;
 };
 
 struct ethqos_emac_match_data {
@@ -110,13 +122,21 @@ struct ethqos_emac_pm_ctx {
 	struct phy *serdes_phy;
 };
 
+struct ethqos_emac_pd_ctx {
+	struct dev_pm_domain_list *pd_list;
+	int serdes_level;
+};
+
 struct qcom_ethqos {
 	struct platform_device *pdev;
 	void __iomem *rgmii_base;
 	void (*configure_func)(struct qcom_ethqos *ethqos,
 			       phy_interface_t interface, int speed);
 
-	struct ethqos_emac_pm_ctx pm;
+	union {
+		struct ethqos_emac_pm_ctx pm;
+		struct ethqos_emac_pd_ctx pd;
+	};
 	phy_interface_t phy_mode;
 
 	const struct ethqos_emac_por *rgmii_por;
@@ -338,6 +358,25 @@ static const struct ethqos_emac_match_data emac_sa8775p_data = {
 	.pm_data = &emac_sa8775p_pm_data,
 };
 
+static const char * const emac_sa8255p_pd_names[] = {
+	"core", "mdio", "serdes"
+};
+
+static const struct ethqos_emac_pm_data emac_sa8255p_pm_data = {
+	.pd = {
+		.pd_flags = PD_FLAG_NO_DEV_LINK,
+		.pd_names = emac_sa8255p_pd_names,
+		.num_pd_names = ETHQOS_NUM_PDS,
+	},
+	.use_domains = true,
+	.clk_ptp_rate = 230400000,
+};
+
+static const struct ethqos_emac_match_data emac_sa8255p_data = {
+	.drv_data = &emac_v4_0_0_data,
+	.pm_data = &emac_sa8255p_pm_data,
+};
+
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 {
 	struct device *dev = &ethqos->pdev->dev;
@@ -406,6 +445,28 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
 	return 0;
 }
 
+static int qcom_ethqos_domain_on(struct qcom_ethqos *ethqos,
+				 enum ethqos_pd_selector sel)
+{
+	struct device *dev = ethqos->pd.pd_list->pd_devs[sel];
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret < 0)
+		dev_err(&ethqos->pdev->dev,
+			"Failed to enable the power domain for %s\n",
+			dev_name(dev));
+	return ret;
+}
+
+static void qcom_ethqos_domain_off(struct qcom_ethqos *ethqos,
+				   enum ethqos_pd_selector sel)
+{
+	struct device *dev = ethqos->pd.pd_list->pd_devs[sel];
+
+	pm_runtime_put_sync(dev);
+}
+
 static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed)
 {
 	struct device *dev = &ethqos->pdev->dev;
@@ -655,6 +716,20 @@ static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos,
 	ethqos_pcs_set_inband(priv, interface == PHY_INTERFACE_MODE_SGMII);
 }
 
+static void ethqos_configure_sgmii_pd(struct qcom_ethqos *ethqos,
+				      phy_interface_t interface, int speed)
+{
+	switch (speed) {
+	case SPEED_2500:
+	case SPEED_1000:
+	case SPEED_100:
+	case SPEED_10:
+		ethqos->pd.serdes_level = speed;
+	}
+
+	ethqos_configure_sgmii(ethqos, interface, speed);
+}
+
 static void ethqos_configure(struct qcom_ethqos *ethqos,
 			     phy_interface_t interface, int speed)
 {
@@ -710,6 +785,45 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
 	return ret;
 }
 
+static int ethqos_mac_finish_serdes_pd(struct net_device *ndev, void *priv,
+				       unsigned int mode,
+				       phy_interface_t interface)
+{
+	struct qcom_ethqos *ethqos = priv;
+	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
+	int ret = 0;
+
+	qcom_ethqos_set_sgmii_loopback(ethqos, false);
+
+	if (interface == PHY_INTERFACE_MODE_SGMII ||
+	    interface == PHY_INTERFACE_MODE_2500BASEX)
+		ret = dev_pm_opp_set_level(dev, ethqos->pd.serdes_level);
+
+	return ret;
+}
+
+static int qcom_ethqos_pd_serdes_powerup(struct net_device *ndev, void *priv)
+{
+	struct qcom_ethqos *ethqos = priv;
+	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
+	int ret;
+
+	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES);
+	if (ret < 0)
+		return ret;
+
+	return dev_pm_opp_set_level(dev, ethqos->pd.serdes_level);
+}
+
+static void qcom_ethqos_pd_serdes_powerdown(struct net_device *ndev, void *priv)
+{
+	struct qcom_ethqos *ethqos = priv;
+	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
+
+	dev_pm_opp_set_level(dev, 0);
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_SERDES);
+}
+
 static int ethqos_clks_config(void *priv, bool enabled)
 {
 	struct qcom_ethqos *ethqos = priv;
@@ -741,6 +855,68 @@ static void ethqos_clks_disable(void *data)
 	ethqos_clks_config(data, false);
 }
 
+static void ethqos_disable_serdes(void *data)
+{
+	struct qcom_ethqos *ethqos = data;
+
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_SERDES);
+}
+
+static int ethqos_pd_clks_config(void *priv, bool enabled)
+{
+	struct qcom_ethqos *ethqos = priv;
+	int ret = 0;
+
+	if (enabled) {
+		ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_MDIO);
+		if (ret < 0) {
+			dev_err(&ethqos->pdev->dev,
+				"Failed to enable the MDIO power domain\n");
+			return ret;
+		}
+
+		ethqos_set_func_clk_en(ethqos);
+	} else {
+		qcom_ethqos_domain_off(ethqos, ETHQOS_PD_MDIO);
+	}
+
+	return ret;
+}
+
+static int qcom_ethqos_pd_init(struct device *dev, void *priv)
+{
+	struct qcom_ethqos *ethqos = priv;
+	int ret;
+
+	/*
+	 * Enable functional clock to prevent DMA reset after timeout due
+	 * to no PHY clock being enabled after the hardware block has been
+	 * power cycled. The actual configuration will be adjusted once
+	 * ethqos_fix_mac_speed() is called.
+	 */
+	ethqos_set_func_clk_en(ethqos);
+
+	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_CORE);
+	if (ret)
+		return ret;
+
+	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_MDIO);
+	if (ret) {
+		qcom_ethqos_domain_off(ethqos, ETHQOS_PD_CORE);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void qcom_ethqos_pd_exit(struct device *dev, void *data)
+{
+	struct qcom_ethqos *ethqos = data;
+
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_MDIO);
+	qcom_ethqos_domain_off(ethqos, ETHQOS_PD_CORE);
+}
+
 static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 {
 	struct plat_stmmacenet_data *plat_dat = priv->plat;
@@ -781,31 +957,11 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 				     "dt configuration failed\n");
 	}
 
-	plat_dat->clks_config = ethqos_clks_config;
-
 	ethqos = devm_kzalloc(dev, sizeof(*ethqos), GFP_KERNEL);
 	if (!ethqos)
 		return -ENOMEM;
 
 	ethqos->phy_mode = plat_dat->phy_interface;
-	switch (ethqos->phy_mode) {
-	case PHY_INTERFACE_MODE_RGMII:
-	case PHY_INTERFACE_MODE_RGMII_ID:
-	case PHY_INTERFACE_MODE_RGMII_RXID:
-	case PHY_INTERFACE_MODE_RGMII_TXID:
-		ethqos->configure_func = ethqos_configure_rgmii;
-		break;
-	case PHY_INTERFACE_MODE_2500BASEX:
-	case PHY_INTERFACE_MODE_SGMII:
-		ethqos->configure_func = ethqos_configure_sgmii;
-		plat_dat->mac_finish = ethqos_mac_finish_serdes;
-		break;
-	default:
-		dev_err(dev, "Unsupported phy mode %s\n",
-			phy_modes(ethqos->phy_mode));
-		return -EINVAL;
-	}
-
 	ethqos->pdev = pdev;
 	ethqos->rgmii_base = devm_platform_ioremap_resource_byname(pdev, "rgmii");
 	if (IS_ERR(ethqos->rgmii_base))
@@ -823,35 +979,101 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
 
-	ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
-	if (IS_ERR(ethqos->pm.link_clk))
-		return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
-				     "Failed to get link_clk\n");
+	if (pm_data && pm_data->use_domains) {
+		switch (ethqos->phy_mode) {
+		case PHY_INTERFACE_MODE_RGMII:
+		case PHY_INTERFACE_MODE_RGMII_ID:
+		case PHY_INTERFACE_MODE_RGMII_RXID:
+		case PHY_INTERFACE_MODE_RGMII_TXID:
+			ethqos->configure_func = ethqos_configure_rgmii;
+			break;
+		case PHY_INTERFACE_MODE_2500BASEX:
+		case PHY_INTERFACE_MODE_SGMII:
+			ethqos->configure_func = ethqos_configure_sgmii_pd;
+			plat_dat->mac_finish = ethqos_mac_finish_serdes_pd;
+			break;
+		default:
+			dev_err(dev, "Unsupported phy mode %s\n",
+				phy_modes(ethqos->phy_mode));
+			return -EINVAL;
+		}
 
-	ret = ethqos_clks_config(ethqos, true);
-	if (ret)
-		return ret;
+		ret = devm_pm_domain_attach_list(dev, &pm_data->pd,
+						 &ethqos->pd.pd_list);
+		if (ret < 0)
+			return dev_err_probe(dev, ret, "Failed to attach power domains\n");
+
+		plat_dat->clks_config = ethqos_pd_clks_config;
+		plat_dat->serdes_powerup = qcom_ethqos_pd_serdes_powerup;
+		plat_dat->serdes_powerdown = qcom_ethqos_pd_serdes_powerdown;
+		plat_dat->exit = qcom_ethqos_pd_exit;
+		plat_dat->init = qcom_ethqos_pd_init;
+		plat_dat->clk_ptp_rate = pm_data->clk_ptp_rate;
+
+		ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to enable the serdes power domain\n");
+
+		ret = devm_add_action_or_reset(dev, ethqos_disable_serdes, ethqos);
+		if (ret)
+			return ret;
+	} else {
+		switch (ethqos->phy_mode) {
+		case PHY_INTERFACE_MODE_RGMII:
+		case PHY_INTERFACE_MODE_RGMII_ID:
+		case PHY_INTERFACE_MODE_RGMII_RXID:
+		case PHY_INTERFACE_MODE_RGMII_TXID:
+			ethqos->configure_func = ethqos_configure_rgmii;
+			break;
+		case PHY_INTERFACE_MODE_2500BASEX:
+		case PHY_INTERFACE_MODE_SGMII:
+			ethqos->configure_func = ethqos_configure_sgmii;
+			plat_dat->mac_finish = ethqos_mac_finish_serdes;
+			break;
+		default:
+			dev_err(dev, "Unsupported phy mode %s\n",
+				phy_modes(ethqos->phy_mode));
+			return -EINVAL;
+		}
 
-	ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
-	if (ret)
-		return ret;
+		ethqos->pm.link_clk = devm_clk_get(dev, clk_name);
+		if (IS_ERR(ethqos->pm.link_clk))
+			return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk),
+					     "Failed to get link_clk\n");
+
+		ret = ethqos_clks_config(ethqos, true);
+		if (ret)
+			return ret;
+
+		ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos);
+		if (ret)
+			return ret;
+
+		ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
+		if (IS_ERR(ethqos->pm.serdes_phy))
+			return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
+					     "Failed to get serdes phy\n");
 
-	ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes");
-	if (IS_ERR(ethqos->pm.serdes_phy))
-		return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy),
-				     "Failed to get serdes phy\n");
+		ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
+				       SPEED_1000);
 
-	ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface,
-			       SPEED_1000);
+		plat_dat->clks_config = ethqos_clks_config;
+		plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
+		plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
+
+		if (ethqos->pm.serdes_phy) {
+			plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup;
+			plat_dat->serdes_powerdown  = qcom_ethqos_serdes_powerdown;
+		}
+	}
 
 	qcom_ethqos_set_sgmii_loopback(ethqos, true);
 	ethqos_set_func_clk_en(ethqos);
 
 	plat_dat->bsp_priv = ethqos;
-	plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate;
 	plat_dat->fix_mac_speed = ethqos_fix_mac_speed;
 	plat_dat->dump_debug_regs = rgmii_dump;
-	plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config;
 	plat_dat->core_type = DWMAC_CORE_GMAC4;
 	if (ethqos->has_emac_ge_3)
 		plat_dat->dwmac4_addrs = &drv_data->dwmac4_addrs;
@@ -877,6 +1099,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 static const struct of_device_id qcom_ethqos_match[] = {
 	{ .compatible = "qcom,qcs404-ethqos", .data = &emac_qcs404_data},
+	{ .compatible = "qcom,sa8255p-ethqos", .data = &emac_sa8255p_data},
 	{ .compatible = "qcom,sa8775p-ethqos", .data = &emac_sa8775p_data},
 	{ .compatible = "qcom,sc8280xp-ethqos", .data = &emac_sc8280xp_data},
 	{ .compatible = "qcom,sm8150-ethqos", .data = &emac_sm8150_data},

-- 
2.47.3

Re: [PATCH net-next v9 2/6] net: stmmac: qcom-ethqos: use generic device properties

[Russell King (Oracle)]

On Mon, Mar 16, 2026 at 01:05:07PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> In order to drop the dependency on CONFIG_OF, convert all device property
> getters from OF-specific to generic device properties and stop pulling
> in any linux/of.h symbols.

Why is this desirable? Please see the recent discussion at

https://lore.kernel.org/r/20260322-remove-device-find-by-of-node-v1-0-b72eb22a1215@gmail.com

specifically replies from Andrew and myself.

Merely wanting to drop a dependency is not a good enough reason for
these kinds of conversions, because they in effect make the DT
properties also apply to ACPI which may not be appropriate (note
for example that MDIO busses are not represented in ACPI.)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH net-next v9 5/6] net: stmmac: qcom-ethqos: split power management context into a separate struct

[Russell King (Oracle)]

On Mon, Mar 16, 2026 at 01:05:10PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> With match data split into general and power-management sections, let's
> now do the same with runtime device data.

As I've already said, this conflicts with work that I have in progress,
which will remove the serdes support from this driver _if_ we can get
forward progress on the PCS bits from Mohd - that has become dependent
on sorting out the MDIO bus clock which seems to have been totally
broken in this driver for quite some time so that we can have confidence
that any testing that is done is actually being done on a setup which is
running within correct specification (and not running the MDIO bus at
some insane speed that may lead to data corruption.)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH net-next v9 6/6] net: stmmac: qcom-ethqos: add support for sa8255p

[Russell King (Oracle)]

On Mon, Mar 16, 2026 at 01:05:11PM +0100, Bartosz Golaszewski wrote:
> Extend the driver to support a new model - sa8255p. Unlike the
> previously supported variants, this one's power management is done in
> the firmware using SCMI. This is modeled in linux using power domains so
> add support for them.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Shouldn't the SerDes driver be doing the power management rather than
the ethernet driver?

We already have the crappy situation with this driver that the stmmac
clocks are not running when they need to be, which is now causing
warnings with the VLAN code. The platform glue driver itself doesn't
_actually_ have enough information on its own to know when it needs
to ensure that the PCS and SerDes need to be operational which is what
is leading to this problem.

Also note that the core stmmac driver does runtime PM management which
covers both the stmmac MDIO block and the core MAC as well. How does
your implementation interact with those, when e.g. a MDIO bus on one
stmmac instance could be used to access a PHY on a different instance.

> +struct ethqos_emac_pd_ctx {
> +	struct dev_pm_domain_list *pd_list;
> +	int serdes_level;

I don't think serdes_level is appropriate nor correct (see below.)

> +static void ethqos_configure_sgmii_pd(struct qcom_ethqos *ethqos,
> +				      phy_interface_t interface, int speed)
> +{
> +	switch (speed) {
> +	case SPEED_2500:
> +	case SPEED_1000:
> +	case SPEED_100:
> +	case SPEED_10:
> +		ethqos->pd.serdes_level = speed;

This is called at mac_link_up(), after mac_finish() has done its
stuff...

> +	}
> +
> +	ethqos_configure_sgmii(ethqos, interface, speed);
> +}
> +
>  static void ethqos_configure(struct qcom_ethqos *ethqos,
>  			     phy_interface_t interface, int speed)
>  {
> @@ -710,6 +785,45 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv,
>  	return ret;
>  }
>  
> +static int ethqos_mac_finish_serdes_pd(struct net_device *ndev, void *priv,
> +				       unsigned int mode,
> +				       phy_interface_t interface)
> +{
> +	struct qcom_ethqos *ethqos = priv;
> +	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
> +	int ret = 0;
> +
> +	qcom_ethqos_set_sgmii_loopback(ethqos, false);
> +
> +	if (interface == PHY_INTERFACE_MODE_SGMII ||
> +	    interface == PHY_INTERFACE_MODE_2500BASEX)
> +		ret = dev_pm_opp_set_level(dev, ethqos->pd.serdes_level);

... which means this won't get called with anything but a stale speed
from the _previous_ link up event.

> +
> +	return ret;
> +}
> +
> +static int qcom_ethqos_pd_serdes_powerup(struct net_device *ndev, void *priv)
> +{
> +	struct qcom_ethqos *ethqos = priv;
> +	struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES];
> +	int ret;
> +
> +	ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES);
> +	if (ret < 0)
> +		return ret;
> +
> +	return dev_pm_opp_set_level(dev, ethqos->pd.serdes_level);

and same here.

The fundamental question arises - why does the power domain need to know
the _media_ speed (which is completely unrelated to the speed at which
the SerDes link operates at) ?

For example, with SGMII, the link operates at 1.25GBaud irrespective of
whether it is operating at an underlying Ethernet data rate of 10M, 100M
or 1G speeds.

To me, the whole "serdes_level" stuff looks completely wrong.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH net-next v9 2/6] net: stmmac: qcom-ethqos: use generic device properties

[Andrew Lunn]

On Mon, Mar 16, 2026 at 01:05:07PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> In order to drop the dependency on CONFIG_OF, convert all device property
> getters from OF-specific to generic device properties and stop pulling
> in any linux/of.h symbols.

Adding to what Russell said, please document your new binding. e.g. in
Documentation/firmware-guide/acpi/dsd.

	Andrew

Re: [PATCH net-next v9 2/6] net: stmmac: qcom-ethqos: use generic device properties

[Andrew Lunn]

On Mon, Mar 16, 2026 at 01:05:07PM +0100, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> 
> In order to drop the dependency on CONFIG_OF, convert all device property
> getters from OF-specific to generic device properties and stop pulling
> in any linux/of.h symbols.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
> ---
>  drivers/net/ethernet/stmicro/stmmac/Kconfig             | 2 +-
>  drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 9 ++++-----
>  2 files changed, 5 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 07088d03dbab5bd1abf66e9460613b839c1d565e..e2af4fdd654340d618477ed87d3889dbb9aab456 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -135,7 +135,7 @@ config DWMAC_MESON
>  config DWMAC_QCOM_ETHQOS
>  	tristate "Qualcomm ETHQOS support"
>  	default ARCH_QCOM
> -	depends on OF && (ARCH_QCOM || COMPILE_TEST)
> +	depends on ARCH_QCOM || COMPILE_TEST
>  	help
>  	  Support for the Qualcomm ETHQOS core.

Are you sure you want to do that?

static int qcom_ethqos_probe(struct platform_device *pdev)
{
	struct device_node *np = pdev->dev.of_node;
	const struct ethqos_emac_driver_data *data;
	struct plat_stmmacenet_data *plat_dat;
	struct stmmac_resources stmmac_res;
	struct device *dev = &pdev->dev;
	struct qcom_ethqos *ethqos;
	int ret, i;

	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
	if (ret)
		return dev_err_probe(dev, ret,
				     "Failed to get platform resources\n");

	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
	if (IS_ERR(plat_dat)) {
		return dev_err_probe(dev, PTR_ERR(plat_dat),
				     "dt configuration failed\n");
	}

https://elixir.bootlin.com/linux/v6.19.9/source/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c#L684


#else
struct plat_stmmacenet_data *
devm_stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
{
	return ERR_PTR(-EINVAL);
}
#endif /* CONFIG_OF */

It seems like this is just going to result in the probe failing with
-EINVAL.

	Andrew