Re: [PATCH v2 4/5] phy: rockchip: inno-usb2: Add clkout_ctl_phy support

[Vinod Koul <vkoul@kernel.org>]

On 05-05-26, 19:04, Heiko Stuebner wrote:
> From: Jonas Karlman <jonas@kwiboo.se>
> 
> The 480m clk is controlled using regs in the PHY address space and not
> in the USB GRF address space on e.g. RK3528 and RK3506.
> 
> Add a clkout_ctl_phy usb2phy_reg to handle enable/disable of the 480m
> clk on these SoCs.
> 
> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 47 +++++++++++++++----
>  1 file changed, 38 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> index 7cec45192393..d8879fcd4291 100644
> --- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> +++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
> @@ -179,6 +179,7 @@ struct rockchip_usb2phy_cfg {
>  	unsigned int	num_ports;
>  	int (*phy_tuning)(struct rockchip_usb2phy *rphy);
>  	struct usb2phy_reg	clkout_ctl;
> +	struct usb2phy_reg	clkout_ctl_phy;

This gives a kernel-doc warning. I have applied please send fix for this

-- 
~Vinod