Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Catalin Marinas <catalin.marinas@arm.com>
To: Kohei Enju <enju.kohei@fujitsu.com>
Cc: Will Deacon <will@kernel.org>,
	Sami Mujawar <sami.mujawar@arm.com>,
	Gavin Shan <gshan@redhat.com>,
	Steven Price <steven.price@arm.com>,
	Suzuki K Poulose <suzuki.poulose@arm.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1] virt: arm-cca-guest: use raw variant of smp_processor_id() in arm_cca_report_new()
Date: Mon, 18 May 2026 13:33:09 +0100	[thread overview]
Message-ID: <agsHBb9f3HkmJaIx@arm.com> (raw)
In-Reply-To: <20260518033157.1865498-1-enju.kohei@fujitsu.com>

On Mon, May 18, 2026 at 12:31:31PM +0900, Kohei Enju wrote:
> With CONFIG_DEBUG_PREEMPT=y, smp_processor_id() becomes an alias of
> debug_smp_processor_id(). This debug function complains when certain
> conditions that ensure CPU ID stability are not met, specifically when
> it's called from a preemptible context.
> 
> In arm_cca_report_new(), which runs in a preemptible context,
> smp_processor_id() triggers a splat [0] due to this.
> 
> However, the CPU ID obtained here is used as the target CPU for
> smp_call_function_single() to designate a specific CPU for subsequent
> operations, not to assert that the current thread will continue to
> execute on the same CPU. Therefore, snapshotting the CPU ID itself is
> correct, and thus there's no actual harm except for the splat.
> 
> Use raw_smp_processor_id() instead, to directly retrieve the current CPU
> ID without the debug checks, avoiding the unnecessary warning message
> while preserving the correct functional behavior.
> 
> [0]
>  BUG: using smp_processor_id() in preemptible [00000000] code: cca-workload-at/134
>  caller is debug_smp_processor_id+0x20/0x2c
>  CPU: 0 UID: 0 PID: 134 Comm: cca-workload-at Not tainted 7.0.0-rc1-gc74a64d12073 #1 PREEMPT
>  Hardware name: linux,dummy-virt (DT)
>  Call trace:
>   [...]
>   check_preemption_disabled+0xf8/0x100
>   debug_smp_processor_id+0x20/0x2c
>   arm_cca_report_new+0x54/0x230
>   tsm_report_read+0x184/0x260
>   tsm_report_outblob_read+0x18/0x38
>   configfs_bin_read_iter+0xf4/0x1dc
>   vfs_read+0x230/0x31c
>   [...]
> 
> Fixes: 7999edc484ca ("virt: arm-cca-guest: TSM_REPORT support for realms")
> Signed-off-by: Kohei Enju <enju.kohei@fujitsu.com>
> ---
>  drivers/virt/coco/arm-cca-guest/arm-cca-guest.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/virt/coco/arm-cca-guest/arm-cca-guest.c b/drivers/virt/coco/arm-cca-guest/arm-cca-guest.c
> index 0c9ea24a200c..2d450caee3e4 100644
> --- a/drivers/virt/coco/arm-cca-guest/arm-cca-guest.c
> +++ b/drivers/virt/coco/arm-cca-guest/arm-cca-guest.c
> @@ -108,7 +108,7 @@ static int arm_cca_report_new(struct tsm_report *report, void *data)
>  	 * allocate outblob based on the returned value from the 'init'
>  	 * call and that cannot be done in an atomic context.
>  	 */
> -	cpu = smp_processor_id();
> +	cpu = raw_smp_processor_id();

That's just hiding the warning which might be genuine, irrespective of
what the comment says. Sashiko has some good points:

https://sashiko.dev/#/patchset/20260518033157.1865498-1-enju.kohei@fujitsu.com

Basically what guarantees that the cpu won't go offline? Can we use
migrate_disable() and ignore the smp_call_function_single() altogether?
It looks like a hack anyway.

We should also look at the other unrelated findings in this function
from Sashiko.

-- 
Catalin


  parent reply	other threads:[~2026-05-18 12:33 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-18  3:31 [PATCH v1] virt: arm-cca-guest: use raw variant of smp_processor_id() in arm_cca_report_new() Kohei Enju
2026-05-18  4:28 ` Gavin Shan
2026-05-18  9:10 ` Suzuki K Poulose
2026-05-18 12:33 ` Catalin Marinas [this message]
2026-05-18 13:38   ` Kohei Enju
2026-05-18 17:21     ` Catalin Marinas
2026-05-19  2:12       ` Kohei Enju

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=agsHBb9f3HkmJaIx@arm.com \
    --to=catalin.marinas@arm.com \
    --cc=enju.kohei@fujitsu.com \
    --cc=gshan@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sami.mujawar@arm.com \
    --cc=steven.price@arm.com \
    --cc=suzuki.poulose@arm.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox