Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Kocialkowski <paulk@sys-base.io>
To: linux-media@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	linux-staging@lists.linux.dev
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Chen-Yu Tsai <wens@kernel.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Arash Golgol <arash.golgol@gmail.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Nicolas Dufresne <nicolas.dufresne@collabora.com>
Subject: Re: [PATCH 04/16] media: sun8i-a83t-mipi-csi2: Use V4L2 subdev active state
Date: Mon, 18 May 2026 16:09:41 +0200	[thread overview]
Message-ID: <agsdpcxifnFwaUu3@collins> (raw)
In-Reply-To: <20260518102451.417971-5-paulk@sys-base.io>

[-- Attachment #1: Type: text/plain, Size: 10308 bytes --]

Le Mon 18 May 26, 12:24, Paul Kocialkowski a écrit :
> From: Arash Golgol <arash.golgol@gmail.com>
> 
> Use the V4L2 subdev active state API to store the active format.
> This simplifies the driver not only by dropping the bridge mbus_format
> field, but it also allows dropping the bridge lock, replaced with
> the state lock.
> 
> The sun8i-a83t-mipi-csi2 hardware does not perform any format
> conversion. Enforce identical formats on the sink and source pads in
> the set_fmt() and init_state() callbacks.
> 
> Signed-off-by: Arash Golgol <arash.golgol@gmail.com>

I forgot to pick it up but this is already:

Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Tested-by: Paul Kocialkowski <paulk@sys-base.io>

Paul

> ---
>  .../sun8i_a83t_mipi_csi2.c                    | 113 +++++++++---------
>  .../sun8i_a83t_mipi_csi2.h                    |   2 -
>  2 files changed, 56 insertions(+), 59 deletions(-)
> 
> diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
> index dbc51daa4fe3..2b7635f3952d 100644
> --- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
> +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.c
> @@ -144,12 +144,12 @@ sun8i_a83t_mipi_csi2_disable(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
>  }
>  
>  static void
> -sun8i_a83t_mipi_csi2_configure(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
> +sun8i_a83t_mipi_csi2_configure(struct sun8i_a83t_mipi_csi2_device *csi2_dev,
> +			       const struct v4l2_mbus_framefmt *mbus_format)
>  {
>  	struct regmap *regmap = csi2_dev->regmap;
>  	unsigned int lanes_count =
>  		csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes;
> -	struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format;
>  	const struct sun8i_a83t_mipi_csi2_format *format;
>  	struct device *dev = csi2_dev->dev;
>  	u32 version = 0;
> @@ -205,7 +205,8 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  	struct v4l2_subdev *source_subdev = csi2_dev->bridge.source_subdev;
>  	union phy_configure_opts dphy_opts = { 0 };
>  	struct phy_configure_opts_mipi_dphy *dphy_cfg = &dphy_opts.mipi_dphy;
> -	struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format;
> +	struct v4l2_subdev_state *state;
> +	const struct v4l2_mbus_framefmt *mbus_format;
>  	const struct sun8i_a83t_mipi_csi2_format *format;
>  	struct phy *dphy = csi2_dev->dphy;
>  	struct device *dev = csi2_dev->dev;
> @@ -215,8 +216,12 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  	unsigned long pixel_rate;
>  	int ret;
>  
> -	if (!source_subdev)
> -		return -ENODEV;
> +	state = v4l2_subdev_lock_and_get_active_state(subdev);
> +
> +	if (!source_subdev) {
> +		ret = -ENODEV;
> +		goto unlock;
> +	}
>  
>  	if (!on) {
>  		v4l2_subdev_call(source_subdev, video, s_stream, 0);
> @@ -228,7 +233,7 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  
>  	ret = pm_runtime_resume_and_get(dev);
>  	if (ret < 0)
> -		return ret;
> +		goto unlock;
>  
>  	/* Sensor pixel rate */
>  
> @@ -254,6 +259,9 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  		goto error_pm;
>  	}
>  
> +	mbus_format =
> +		v4l2_subdev_state_get_format(state,
> +					     SUN8I_A83T_MIPI_CSI2_PAD_SINK);
>  	format = sun8i_a83t_mipi_csi2_format_find(mbus_format->code);
>  	if (WARN_ON(!format)) {
>  		ret = -ENODEV;
> @@ -292,7 +300,7 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  
>  	/* Controller */
>  
> -	sun8i_a83t_mipi_csi2_configure(csi2_dev);
> +	sun8i_a83t_mipi_csi2_configure(csi2_dev, mbus_format);
>  	sun8i_a83t_mipi_csi2_enable(csi2_dev);
>  
>  	/* D-PHY */
> @@ -309,7 +317,8 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  	if (ret && ret != -ENOIOCTLCMD)
>  		goto disable;
>  
> -	return 0;
> +	ret = 0;
> +	goto unlock;
>  
>  disable:
>  	phy_power_off(dphy);
> @@ -318,6 +327,8 @@ static int sun8i_a83t_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on)
>  error_pm:
>  	pm_runtime_put(dev);
>  
> +unlock:
> +	v4l2_subdev_unlock_state(state);
>  	return ret;
>  }
>  
> @@ -341,22 +352,24 @@ sun8i_a83t_mipi_csi2_mbus_format_prepare(struct v4l2_mbus_framefmt *mbus_format)
>  static int sun8i_a83t_mipi_csi2_init_state(struct v4l2_subdev *subdev,
>  					   struct v4l2_subdev_state *state)
>  {
> -	struct sun8i_a83t_mipi_csi2_device *csi2_dev =
> -		v4l2_get_subdevdata(subdev);
> -	unsigned int pad = SUN8I_A83T_MIPI_CSI2_PAD_SINK;
> -	struct v4l2_mbus_framefmt *mbus_format =
> -		v4l2_subdev_state_get_format(state, pad);
> -	struct mutex *lock = &csi2_dev->bridge.lock;
> +	unsigned int pad;
>  
> -	mutex_lock(lock);
> +	/*
> +	 * This subdev does not perform format conversion,
> +	 * initialize both pads identically.
> +	 */
> +	for (pad = 0; pad < subdev->entity.num_pads; pad++) {
> +		struct v4l2_mbus_framefmt *mbus_format;
>  
> -	mbus_format->code = sun8i_a83t_mipi_csi2_formats[0].mbus_code;
> -	mbus_format->width = 640;
> -	mbus_format->height = 480;
> +		mbus_format = v4l2_subdev_state_get_format(state, pad);
> +
> +		mbus_format->code = sun8i_a83t_mipi_csi2_formats[0].mbus_code;
> +		mbus_format->width = 640;
> +		mbus_format->height = 480;
>  
> -	sun8i_a83t_mipi_csi2_mbus_format_prepare(mbus_format);
> +		sun8i_a83t_mipi_csi2_mbus_format_prepare(mbus_format);
> +	}
>  
> -	mutex_unlock(lock);
>  
>  	return 0;
>  }
> @@ -375,55 +388,33 @@ sun8i_a83t_mipi_csi2_enum_mbus_code(struct v4l2_subdev *subdev,
>  	return 0;
>  }
>  
> -static int sun8i_a83t_mipi_csi2_get_fmt(struct v4l2_subdev *subdev,
> -					struct v4l2_subdev_state *state,
> -					struct v4l2_subdev_format *format)
> -{
> -	struct sun8i_a83t_mipi_csi2_device *csi2_dev =
> -		v4l2_get_subdevdata(subdev);
> -	struct v4l2_mbus_framefmt *mbus_format = &format->format;
> -	struct mutex *lock = &csi2_dev->bridge.lock;
> -
> -	mutex_lock(lock);
> -
> -	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> -		*mbus_format = *v4l2_subdev_state_get_format(state,
> -							     format->pad);
> -	else
> -		*mbus_format = csi2_dev->bridge.mbus_format;
> -
> -	mutex_unlock(lock);
> -
> -	return 0;
> -}
> -
>  static int sun8i_a83t_mipi_csi2_set_fmt(struct v4l2_subdev *subdev,
>  					struct v4l2_subdev_state *state,
>  					struct v4l2_subdev_format *format)
>  {
> -	struct sun8i_a83t_mipi_csi2_device *csi2_dev =
> -		v4l2_get_subdevdata(subdev);
> -	struct v4l2_mbus_framefmt *mbus_format = &format->format;
> -	struct mutex *lock = &csi2_dev->bridge.lock;
> +	struct v4l2_mbus_framefmt *fmt;
>  
> -	mutex_lock(lock);
> +	/* The format on the source pad always matches the sink pad. */
> +	if (format->pad != SUN8I_A83T_MIPI_CSI2_PAD_SINK)
> +		return v4l2_subdev_get_fmt(subdev, state, format);
>  
> -	sun8i_a83t_mipi_csi2_mbus_format_prepare(mbus_format);
> +	sun8i_a83t_mipi_csi2_mbus_format_prepare(&format->format);
>  
> -	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> -		*v4l2_subdev_state_get_format(state, format->pad) =
> -			*mbus_format;
> -	else
> -		csi2_dev->bridge.mbus_format = *mbus_format;
> +	/* Set the format on the sink pad. */
> +	fmt = v4l2_subdev_state_get_format(state, format->pad);
> +	*fmt = format->format;
>  
> -	mutex_unlock(lock);
> +	/* Propagate the format to the source pad. */
> +	fmt = v4l2_subdev_state_get_format(state,
> +					   SUN8I_A83T_MIPI_CSI2_PAD_SOURCE);
> +	*fmt = format->format;
>  
>  	return 0;
>  }
>  
>  static const struct v4l2_subdev_pad_ops sun8i_a83t_mipi_csi2_pad_ops = {
>  	.enum_mbus_code	= sun8i_a83t_mipi_csi2_enum_mbus_code,
> -	.get_fmt	= sun8i_a83t_mipi_csi2_get_fmt,
> +	.get_fmt	= v4l2_subdev_get_fmt,
>  	.set_fmt	= sun8i_a83t_mipi_csi2_set_fmt,
>  };
>  
> @@ -540,8 +531,6 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
>  	bool notifier_registered = false;
>  	int ret;
>  
> -	mutex_init(&bridge->lock);
> -
>  	/* V4L2 Subdev */
>  
>  	v4l2_subdev_init(subdev, &sun8i_a83t_mipi_csi2_subdev_ops);
> @@ -570,6 +559,12 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
>  	if (ret)
>  		return ret;
>  
> +	/* V4L2 Subdev finalize */
> +
> +	ret = v4l2_subdev_init_finalize(subdev);
> +	if (ret < 0)
> +		goto error_media_entity_cleanup;
> +
>  	/* V4L2 Async */
>  
>  	v4l2_async_subdev_nf_init(notifier, subdev);
> @@ -603,6 +598,9 @@ sun8i_a83t_mipi_csi2_bridge_setup(struct sun8i_a83t_mipi_csi2_device *csi2_dev)
>  error_v4l2_notifier_cleanup:
>  	v4l2_async_nf_cleanup(notifier);
>  
> +	v4l2_subdev_cleanup(subdev);
> +
> +error_media_entity_cleanup:
>  	media_entity_cleanup(&subdev->entity);
>  
>  	return ret;
> @@ -617,6 +615,7 @@ sun8i_a83t_mipi_csi2_bridge_cleanup(struct sun8i_a83t_mipi_csi2_device *csi2_dev
>  	v4l2_async_unregister_subdev(subdev);
>  	v4l2_async_nf_unregister(notifier);
>  	v4l2_async_nf_cleanup(notifier);
> +	v4l2_subdev_cleanup(subdev);
>  	media_entity_cleanup(&subdev->entity);
>  }
>  
> diff --git a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h
> index f1e64c53434c..819527bcd64d 100644
> --- a/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h
> +++ b/drivers/media/platform/sunxi/sun8i-a83t-mipi-csi2/sun8i_a83t_mipi_csi2.h
> @@ -33,8 +33,6 @@ struct sun8i_a83t_mipi_csi2_bridge {
>  	struct media_pad		pads[SUN8I_A83T_MIPI_CSI2_PAD_COUNT];
>  	struct v4l2_fwnode_endpoint	endpoint;
>  	struct v4l2_async_notifier	notifier;
> -	struct v4l2_mbus_framefmt	mbus_format;
> -	struct mutex			lock; /* Mbus format lock. */
>  
>  	struct v4l2_subdev		*source_subdev;
>  };
> -- 
> 2.54.0
> 

-- 
Paul Kocialkowski,

Independent contractor - sys-base - https://www.sys-base.io/
Free software developer - https://www.paulk.fr/

Expert in multimedia, graphics and embedded hardware support with Linux.

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

  reply	other threads:[~2026-05-18 14:09 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-18 10:24 [PATCH 00/16] media: sun6i-csi/isp MC-centric support and cleanups Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 01/16] media: sun6i-csi: bridge: Use V4L2 subdev active state Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 02/16] media: sun6i-csi: capture: Implement vidioc_enum_framesizes Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 03/16] media: sun6i-mipi-csi2: Use V4L2 subdev active state Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 04/16] media: sun8i-a83t-mipi-csi2: " Paul Kocialkowski
2026-05-18 14:09   ` Paul Kocialkowski [this message]
2026-05-18 10:24 ` [PATCH 05/16] media: v4l2-common: Fix NV15_4L4 format info block height Paul Kocialkowski
2026-05-19 15:16   ` Nicolas Dufresne
2026-05-19 20:33     ` Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 06/16] media: v4l2-common: Add missing tiled format info block sizes Paul Kocialkowski
2026-05-19 15:18   ` Nicolas Dufresne
2026-05-19 20:37     ` Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 07/16] media: v4l2-common: Add NV12_16L16 pixel format to v4l2 format info Paul Kocialkowski
2026-05-19 15:22   ` Nicolas Dufresne
2026-05-18 10:24 ` [PATCH 08/16] media: v4l2-common: Add NV12_32L32 " Paul Kocialkowski
2026-05-19 15:23   ` Nicolas Dufresne
2026-05-18 10:24 ` [PATCH 09/16] media: sun6i-csi: Split format validation to a dedicated helper Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 10/16] media: sun6i-csi: Add support for MC-centric format enumeration Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 11/16] media: sun6i-csi: Tidy up and unify coding style Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 12/16] media: sun6i-mipi-csi2: Fix parenthesis alignment Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 13/16] media: sun6i-isp: Add dummy params link_validate implementation Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 14/16] media: sun6i-isp: Use V4L2 subdev active state Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 15/16] media: sun6i-isp: Add support for MC-centric format enumeration Paul Kocialkowski
2026-05-18 10:24 ` [PATCH 16/16] media: sun6i-isp: Add support for frame size enumeration Paul Kocialkowski
2026-05-18 12:15 ` [PATCH 00/16] media: sun6i-csi/isp MC-centric support and cleanups Laurent Pinchart
2026-05-18 14:08   ` Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=agsdpcxifnFwaUu3@collins \
    --to=paulk@sys-base.io \
    --cc=arash.golgol@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mchehab@kernel.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=samuel@sholland.org \
    --cc=wens@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox