From: Peng Fan <peng.fan@oss.nxp.com>
To: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
Cc: Bjorn Andersson <andersson@kernel.org>,
Mathieu Poirier <mathieu.poirier@linaro.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Frank Li <Frank.Li@nxp.com>,
Sascha Hauer <s.hauer@pengutronix.de>,
Peng Fan <peng.fan@nxp.com>, Fabio Estevam <festevam@gmail.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/5] remoteproc: imx_rpoc: fix carveout name parsing
Date: Mon, 25 May 2026 10:13:15 +0800 [thread overview]
Message-ID: <ahOwO7LBXCYFIngw@shlinux89> (raw)
In-Reply-To: <20260522111849.783-3-laurentiumihalcea111@gmail.com>
On Fri, May 22, 2026 at 04:18:46AM -0700, Laurentiu Mihalcea wrote:
>From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>
>The imx remoteproc driver assumes that the names of the reserved memory
>regions reflect their usage (e.g. "vdevbuffer", "vdev0vring0", etc.). This
>conflicts with the devicetree specification's recommendation, which states
>that the names of the devicetree nodes should be generic.
>
>Therefore, instead of relying on the node names, use the names passed via
>the "memory-region-names" property if present. Otherwise, keep the old
>behavior.
>
>The definition of imx_rproc_rmem_to_resource() is added to a common place
>as imx_dsp_rproc.c can also use it given that it suffers from the same
>aforementioned problem.
>
>Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>---
> drivers/remoteproc/imx_rproc.c | 7 +++++--
> drivers/remoteproc/imx_rproc.h | 19 +++++++++++++++++++
> 2 files changed, 24 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
>index 7f54322244ac..1ee1c658dcc1 100644
>--- a/drivers/remoteproc/imx_rproc.c
>+++ b/drivers/remoteproc/imx_rproc.c
>@@ -672,7 +672,7 @@ static int imx_rproc_prepare(struct rproc *rproc)
> int err;
> struct resource res;
>
>- err = of_reserved_mem_region_to_resource(np, i++, &res);
>+ err = imx_rproc_rmem_to_resource(np, i++, &res);
> if (err)
> break;
>
>@@ -850,11 +850,14 @@ static int imx_rproc_addr_init(struct imx_rproc *priv,
> if (nph <= 0)
> return 0;
>
>+ if (!of_property_present(np, "memory-region-names"))
>+ dev_warn(dev, "using node names for carveouts should be avoided\n");
Please check 'memory-regions && !memory-region-names', some demos may not
need to use memory regions.
Regards
Peng
>+
> /* remap optional addresses */
> for (a = 0; a < nph; a++) {
> struct resource res;
>
>- err = of_reserved_mem_region_to_resource(np, a, &res);
>+ err = imx_rproc_rmem_to_resource(np, a, &res);
> if (err) {
> dev_err(dev, "unable to resolve memory region\n");
> return err;
>diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
>index 0d7d48352a10..58e9daa41afe 100644
>--- a/drivers/remoteproc/imx_rproc.h
>+++ b/drivers/remoteproc/imx_rproc.h
>@@ -45,4 +45,23 @@ struct imx_rproc_dcfg {
> u32 reset_vector_mask;
> };
>
>+static inline int imx_rproc_rmem_to_resource(struct device_node *np,
>+ int index,
>+ struct resource *res)
>+{
>+ int ret;
>+
>+ ret = of_reserved_mem_region_to_resource(np, index, res);
>+ if (ret)
>+ return ret;
>+
>+ /* "memory-region-names" is optional */
>+ ret = of_property_read_string_index(np, "memory-region-names",
>+ index, &res->name);
>+ if (ret == -EINVAL)
>+ return 0;
>+
>+ return ret;
>+}
>+
> #endif /* _IMX_RPROC_H */
>--
>2.43.0
>
next prev parent reply other threads:[~2026-05-25 2:15 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-22 11:18 [PATCH 0/5] Add RPROC support for the MX95-15x15-FRDM board Laurentiu Mihalcea
2026-05-22 11:18 ` [PATCH 1/5] dt-bindings: remoteproc: imx_rproc: document optional "memory-region-names" Laurentiu Mihalcea
2026-05-22 18:00 ` Frank Li
2026-05-22 11:18 ` [PATCH 2/5] remoteproc: imx_rpoc: fix carveout name parsing Laurentiu Mihalcea
2026-05-25 2:13 ` Peng Fan [this message]
2026-05-22 11:18 ` [PATCH 3/5] arm64: dts: freescale: imx95-toradex-smarc: move CM7 node to SoC DTSI Laurentiu Mihalcea
2026-05-22 14:02 ` Francesco Dolcini
2026-05-25 2:15 ` Peng Fan
2026-05-22 11:18 ` [PATCH 4/5] arm64: dts: freescale: imx95-15x15-frdm: remove common rmem regions Laurentiu Mihalcea
2026-05-22 11:18 ` [PATCH 5/5] arm64: dts: freescale: add DT overlay for MX95-15x15-FRDM RPMSG usage Laurentiu Mihalcea
2026-05-22 12:11 ` Daniel Baluta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ahOwO7LBXCYFIngw@shlinux89 \
--to=peng.fan@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=laurentiumihalcea111@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=peng.fan@nxp.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox