Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Rapoport <rppt@kernel.org>
To: Mostafa Saleh <smostafa@google.com>
Cc: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	catalin.marinas@arm.com, will@kernel.org, maz@kernel.org,
	aneesh.kumar@kernel.org
Subject: Re: [PATCH 1/3] arm64/mm: Simplify SWIOTLB setup in arch_mm_preinit()
Date: Wed, 3 Jun 2026 15:27:52 +0300	[thread overview]
Message-ID: <aiAdyLKSRGjV4_r3@kernel.org> (raw)
In-Reply-To: <20260603110522.3331819-2-smostafa@google.com>

Hi,

On Wed, Jun 03, 2026 at 11:05:20AM +0000, Mostafa Saleh wrote:
> At the moment, arch_mm_preinit() checks if the system has limited
> addressing or is running under CCA to enable SWIOTLB, only after to
> be forced to true anyway if it was false due to
> CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC being unconditionally true for
> arm64.
> 
> Simplify this logic, by making it clear that SWIOTLB is always used
> but its size depends on the address layout of the system.
> 
> Signed-off-by: Mostafa Saleh <smostafa@google.com>
> ---
>  arch/arm64/mm/init.c | 11 ++++-------
>  1 file changed, 4 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> index 97987f850a33..fcc9c05a8fe6 100644
> --- a/arch/arm64/mm/init.c
> +++ b/arch/arm64/mm/init.c
> @@ -336,25 +336,22 @@ void __init arch_setup_zero_pages(void)
>  void __init arch_mm_preinit(void)
>  {
>  	unsigned int flags = SWIOTLB_VERBOSE;
> -	bool swiotlb = max_pfn > PFN_DOWN(arm64_dma_phys_limit);
> +	bool limited_addressing = max_pfn > PFN_DOWN(arm64_dma_phys_limit);
>  
>  	if (is_realm_world()) {
> -		swiotlb = true;
>  		flags |= SWIOTLB_FORCE;
> -	}
> -
> -	if (IS_ENABLED(CONFIG_DMA_BOUNCE_UNALIGNED_KMALLOC) && !swiotlb) {
> +	} else if (!limited_addressing) {

Can realm_world() coexist with limited_addressing? Then the size adjustment
is still required.

I'd also make this more explicit:

	if (max_pfn > PFN_DOWN(arm64_dma_phys_limit))

>  		/*
>  		 * If no bouncing needed for ZONE_DMA, reduce the swiotlb
>  		 * buffer for kmalloc() bouncing to 1MB per 1GB of RAM.
>  		 */
>  		unsigned long size =
>  			DIV_ROUND_UP(memblock_phys_mem_size(), 1024);
> +
>  		swiotlb_adjust_size(min(swiotlb_size_or_default(), size));
> -		swiotlb = true;
>  	}
>  
> -	swiotlb_init(swiotlb, flags);
> +	swiotlb_init(true, flags);
>  
>  	/*
>  	 * Check boundaries twice: Some fundamental inconsistencies can be
> -- 
> 2.54.0.1032.g2f8565e1d1-goog
> 

-- 
Sincerely yours,
Mike.


  reply	other threads:[~2026-06-03 12:28 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-03 11:05 [PATCH 0/3] arm64/coco: Convert pKVM to a CC platform Mostafa Saleh
2026-06-03 11:05 ` [PATCH 1/3] arm64/mm: Simplify SWIOTLB setup in arch_mm_preinit() Mostafa Saleh
2026-06-03 12:27   ` Mike Rapoport [this message]
2026-06-03 13:13     ` Mostafa Saleh
2026-06-03 11:05 ` [PATCH 2/3] drivers/virt: pkvm: Fix end calculation in mmio_guard_ioremap_hook() Mostafa Saleh
2026-06-03 11:05 ` [PATCH 3/3] arm64/coco: Add pKVM as a CC platform Mostafa Saleh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aiAdyLKSRGjV4_r3@kernel.org \
    --to=rppt@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=smostafa@google.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox