Re: [PATCHv2 3/4] serial: mxs-auart: use devm resources for iomem and GPIO IRQs

[Frank Li <Frank.li@oss.nxp.com>]

On Tue, Jun 09, 2026 at 03:37:16PM -0700, Rosen Penev wrote:
> Replace platform_get_resource + ioremap with
> devm_platform_get_and_ioremap_resource and convert GPIO IRQ
> request_irq/free_irq to devm_request_irq. This eliminates the
> mxs_auart_free_gpio_irq function and its call sites, and the
> out_iounmap error label. Simplify the remove function accordingly.

as my said before, all function need add ()

Frank
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
>  drivers/tty/serial/mxs-auart.c | 53 +++++++---------------------------
>  1 file changed, 11 insertions(+), 42 deletions(-)
>
> diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
> index aa59a48bfad7..4499e3206e85 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -1517,15 +1517,6 @@ static int mxs_auart_init_gpios(struct mxs_auart_port *s, struct device *dev)
>  	return 0;
>  }
>
> -static void mxs_auart_free_gpio_irq(struct mxs_auart_port *s)
> -{
> -	enum mctrl_gpio_idx i;
> -
> -	for (i = 0; i < UART_GPIO_MAX; i++)
> -		if (s->gpio_irq[i] >= 0)
> -			free_irq(s->gpio_irq[i], s);
> -}
> -
>  static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
>  {
>  	int *irq = s->gpio_irq;
> @@ -1537,21 +1528,13 @@ static int mxs_auart_request_gpio_irq(struct mxs_auart_port *s)
>  			continue;
>
>  		irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
> -		err = request_irq(irq[i], mxs_auart_irq_handle,
> -				IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
> +		err = devm_request_irq(s->dev, irq[i], mxs_auart_irq_handle,
> +				       IRQ_TYPE_EDGE_BOTH, dev_name(s->dev), s);
>  		if (err)
>  			dev_err(s->dev, "%s - Can't get %d irq\n",
>  				__func__, irq[i]);
>  	}
>
> -	/*
> -	 * If something went wrong, rollback.
> -	 * Be careful: i may be unsigned.
> -	 */
> -	while (err && (i-- > 0))
> -		if (irq[i] >= 0)
> -			free_irq(irq[i], s);
> -
>  	return err;
>  }
>
> @@ -1596,18 +1579,12 @@ static int mxs_auart_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>
> -	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -	if (!r) {
> -		ret = -ENXIO;
> +	s->port.membase = devm_platform_get_and_ioremap_resource(pdev, 0, &r);
> +	if (IS_ERR(s->port.membase)) {
> +		ret = PTR_ERR(s->port.membase);
>  		goto out_disable_clk;
>  	}
> -
>  	s->port.mapbase = r->start;
> -	s->port.membase = ioremap(r->start, resource_size(r));
> -	if (!s->port.membase) {
> -		ret = -ENOMEM;
> -		goto out_disable_clk;
> -	}
>  	s->port.ops = &mxs_auart_ops;
>  	s->port.iotype = UPIO_MEM;
>  	s->port.fifosize = MXS_AUART_FIFO_SIZE;
> @@ -1622,21 +1599,21 @@ static int mxs_auart_probe(struct platform_device *pdev)
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0) {
>  		ret = irq;
> -		goto out_iounmap;
> +		goto out_disable_clk;
>  	}
>
>  	s->port.irq = irq;
>  	ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
>  			       dev_name(&pdev->dev), s);
>  	if (ret)
> -		goto out_iounmap;
> +		goto out_disable_clk;
>
>  	platform_set_drvdata(pdev, s);
>
>  	ret = mxs_auart_init_gpios(s, &pdev->dev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
> -		goto out_iounmap;
> +		goto out_disable_clk;
>  	}
>
>  	/*
> @@ -1644,7 +1621,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
>  	 */
>  	ret = mxs_auart_request_gpio_irq(s);
>  	if (ret)
> -		goto out_iounmap;
> +		goto out_disable_clk;
>
>  	auart_port[s->port.line] = s;
>
> @@ -1667,11 +1644,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
>  	return 0;
>
>  out_free_qpio_irq:
> -	mxs_auart_free_gpio_irq(s);
> -	auart_port[pdev->id] = NULL;
> -
> -out_iounmap:
> -	iounmap(s->port.membase);
> +	auart_port[s->port.line] = NULL;
>
>  out_disable_clk:
>  	clk_disable_unprepare(s->clk);
> @@ -1683,11 +1656,7 @@ static void mxs_auart_remove(struct platform_device *pdev)
>  	struct mxs_auart_port *s = platform_get_drvdata(pdev);
>
>  	uart_remove_one_port(&auart_driver, &s->port);
> -	auart_port[pdev->id] = NULL;
> -	mxs_auart_free_gpio_irq(s);
> -	iounmap(s->port.membase);
> -	if (is_asm9260_auart(s))
> -		clk_disable_unprepare(s->clk);
> +	auart_port[s->port.line] = NULL;
>  }
>
>  static struct platform_driver mxs_auart_driver = {
> --
> 2.54.0
>
>