Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Uladzislau Rezki <urezki@gmail.com>
To: Wen Jiang <jiangwenxiaomi@gmail.com>
Cc: linux-mm@kvack.org, linux-arm-kernel@lists.infradead.org,
	catalin.marinas@arm.com, will@kernel.org,
	akpm@linux-foundation.org, urezki@gmail.com, baohua@kernel.org,
	Xueyuan.chen21@gmail.com, dev.jain@arm.com, rppt@kernel.org,
	david@kernel.org, ryan.roberts@arm.com,
	anshuman.khandual@arm.com, ajd@linux.ibm.com,
	linux-kernel@vger.kernel.org, jiangwen6@xiaomi.com,
	shanghaoqiang@xiaomi.com
Subject: Re: [PATCH v4 3/6] mm/vmalloc: Extract vmap_set_ptes() to consolidate PTE mapping logic
Date: Fri, 26 Jun 2026 18:21:51 +0200	[thread overview]
Message-ID: <aj6nH7bJBI4sOmxE@milan> (raw)
In-Reply-To: <20260618084726.1070022-4-jiangwen6@xiaomi.com>

On Thu, Jun 18, 2026 at 04:47:23PM +0800, Wen Jiang wrote:
> Extract the common PTE mapping logic from vmap_pte_range() into a
> shared helper vmap_set_ptes(). This handles both CONT_PTE and regular
> PTE mappings in a single function, preparing for the next patch which
> will extend vmap_pages_pte_range() to also use this helper.
> 
> The #ifdef CONFIG_HUGETLB_PAGE guard is moved inside vmap_set_ptes(),
> so callers no longer need to handle the conditional compilation.
> 
> No functional change.
> 
> Signed-off-by: Wen Jiang <jiangwen6@xiaomi.com>
> Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
> ---
>  mm/vmalloc.c | 44 +++++++++++++++++++++++++++++++-------------
>  1 file changed, 31 insertions(+), 13 deletions(-)
> 
> diff --git a/mm/vmalloc.c b/mm/vmalloc.c
> index 2c2f74a07f396..6660f240d27c9 100644
> --- a/mm/vmalloc.c
> +++ b/mm/vmalloc.c
> @@ -91,6 +91,35 @@ struct vfree_deferred {
>  static DEFINE_PER_CPU(struct vfree_deferred, vfree_deferred);
>  
>  /*** Page table manipulation functions ***/
> +
> +/*
> + * Set PTE mappings for the given PFN. Try CONT_PTE mappings first when
> + * supported, otherwise fall back to PAGE_SIZE mappings.
> + *
> + * Return: mapping size.
> + */
> +static __always_inline unsigned long vmap_set_ptes(pte_t *pte,
> +		unsigned long addr, unsigned long end, u64 pfn,
> +		pgprot_t prot, unsigned int max_page_shift)
> +{
> +#ifdef CONFIG_HUGETLB_PAGE
> +	if (max_page_shift > PAGE_SHIFT) {
> +		unsigned long size;
> +
> +		size = arch_vmap_pte_range_map_size(addr, end, pfn, max_page_shift);
> +		if (size != PAGE_SIZE) {
> +			pte_t entry = pfn_pte(pfn, prot);
> +
> +			entry = arch_make_huge_pte(entry, ilog2(size), 0);
> +			set_huge_pte_at(&init_mm, addr, pte, entry, size);
> +			return size;
> +		}
> +	}
> +#endif
> +	set_pte_at(&init_mm, addr, pte, pfn_pte(pfn, prot));
> +	return PAGE_SIZE;
> +}
> +
>  static int vmap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
>  			phys_addr_t phys_addr, pgprot_t prot,
>  			unsigned int max_page_shift, pgtbl_mod_mask *mask)
> @@ -119,19 +148,8 @@ static int vmap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
>  			BUG();
>  		}
>  
> -#ifdef CONFIG_HUGETLB_PAGE
> -		size = arch_vmap_pte_range_map_size(addr, end, pfn, max_page_shift);
> -		if (size != PAGE_SIZE) {
> -			pte_t entry = pfn_pte(pfn, prot);
> -
> -			entry = arch_make_huge_pte(entry, ilog2(size), 0);
> -			set_huge_pte_at(&init_mm, addr, pte, entry, size);
> -			pfn += PFN_DOWN(size);
> -			continue;
> -		}
> -#endif
> -		set_pte_at(&init_mm, addr, pte, pfn_pte(pfn, prot));
> -		pfn++;
> +		size = vmap_set_ptes(pte, addr, end, pfn, prot, max_page_shift);
> +		pfn += PFN_DOWN(size);
>  	} while (pte += PFN_DOWN(size), addr += size, addr != end);
>  
>  	lazy_mmu_mode_disable();
> -- 
> 2.34.1
> 
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>

--
Uladzislau Rezki


  reply	other threads:[~2026-06-26 16:22 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-18  8:47 [PATCH v4 0/6] mm/vmalloc: Speed up ioremap, vmalloc and vmap with contiguous memory Wen Jiang
2026-06-18  8:47 ` [PATCH v4 1/6] arm64/hugetlb: Extend batching of multiple CONT_PTE in a single PTE setup Wen Jiang
2026-06-18  8:47 ` [PATCH v4 2/6] arm64/vmalloc: Allow arch_vmap_pte_range_map_size to batch multiple CONT_PTE Wen Jiang
2026-06-18  8:47 ` [PATCH v4 3/6] mm/vmalloc: Extract vmap_set_ptes() to consolidate PTE mapping logic Wen Jiang
2026-06-26 16:21   ` Uladzislau Rezki [this message]
2026-06-18  8:47 ` [PATCH v4 4/6] mm/vmalloc: Extend page table walk to support larger page_shift sizes and eliminate page table rewalk Wen Jiang
2026-06-18  8:47 ` [PATCH v4 5/6] mm/vmalloc: map contiguous pages in batches for vmap() if possible Wen Jiang
2026-06-18  8:47 ` [PATCH v4 6/6] mm/vmalloc: align vm_area so vmap() can batch mappings Wen Jiang
2026-06-26 16:20   ` Uladzislau Rezki
2026-06-25  2:57 ` [PATCH v4 0/6] mm/vmalloc: Speed up ioremap, vmalloc and vmap with contiguous memory Andrew Morton
2026-06-25  6:37 ` Dev Jain
2026-06-26 11:09   ` Barry Song
2026-06-26 15:12 ` Leo Yan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aj6nH7bJBI4sOmxE@milan \
    --to=urezki@gmail.com \
    --cc=Xueyuan.chen21@gmail.com \
    --cc=ajd@linux.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=baohua@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=david@kernel.org \
    --cc=dev.jain@arm.com \
    --cc=jiangwen6@xiaomi.com \
    --cc=jiangwenxiaomi@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=rppt@kernel.org \
    --cc=ryan.roberts@arm.com \
    --cc=shanghaoqiang@xiaomi.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox