> On Sun, 14 Jun 2026 07:30:54 +0800 Wayen Yan wrote: > > In airoha_dev_select_queue(), the expression: > > > > queue = (skb->priority - 1) % AIROHA_NUM_QOS_QUEUES; > > > > implicitly converts to unsigned arithmetic: when skb->priority is 0 > > (the default for unclassified traffic), (0u - 1u) wraps to UINT_MAX, > > and UINT_MAX % 8 = 7, routing default best-effort packets to the > > highest-priority QoS queue. This causes QoS inversion where the > > majority of traffic on a PON gateway starves actual high-priority > > flows (VoIP, gaming, etc.). > > > > Fix by guarding the subtraction: when priority is 0, map to queue 0 > > (lowest priority), otherwise apply the original (priority - 1) % 8 > > mapping. > > > > Fixes: 2b288b81560b ("net: airoha: Introduce ndo_select_queue callback") > > Acked-by: Lorenzo Bianconi > > Reviewed-by: Joe Damato > > Signed-off-by: Wayen Yan > > --- > > drivers/net/ethernet/airoha/airoha_eth.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/drivers/net/ethernet/airoha/airoha_eth.c b/drivers/net/ethernet/airoha/airoha_eth.c > > index 31cdb11cd7..d476ef83c3 100644 > > --- a/drivers/net/ethernet/airoha/airoha_eth.c > > +++ b/drivers/net/ethernet/airoha/airoha_eth.c > > @@ -1933,7 +1933,7 @@ static u16 airoha_dev_select_queue(struct net_device *dev, struct sk_buff *skb, > > */ > > channel = netdev_uses_dsa(dev) ? skb_get_queue_mapping(skb) : port->id; > > channel = channel % AIROHA_NUM_QOS_CHANNELS; > > - queue = (skb->priority - 1) % AIROHA_NUM_QOS_QUEUES; /* QoS queue */ > > + queue = skb->priority ? (skb->priority - 1) % AIROHA_NUM_QOS_QUEUES : 0; > > Hi Lorenzo, is there a reason we're subtracting 1 here in the first > place? Could be just me, but may be worth adding a comment here. > > Intuitively if we are "narrowing" 16 prios to 8 queues it'd make most > sense to group the adjacent ones -- divide by two. > > Please respin with some sort of an explanation.. IIRC this is a leftover of the ETS offload support. I agree it is righ to just do: queue = skb->priority % AIROHA_NUM_QOS_QUEUES; /* QoS queue */ @Wayen: can you please respin fixing the issue? Please add even my Acked-by: Acked-by: Lorenzo Bianconi Regards, Lorenzo > > > queue = channel * AIROHA_NUM_QOS_QUEUES + queue; > > > > return queue < dev->num_tx_queues ? queue : 0; > -- > pw-bot: cr