From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Daniele Briguglio <hello@superkali.me>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Heiko Stuebner <heiko@sntech.de>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
Diederik de Haas <diederik@cknow-tech.com>,
Nicolas Frattaroli <nicolas.frattaroli@collabora.com>,
Ricardo Pardini <ricardo@pardini.net>
Subject: Re: [PATCH] clk: rockchip: rk3588: don't disable unused I2S MCLK output gates
Date: Wed, 24 Jun 2026 15:42:09 +0200 [thread overview]
Message-ID: <ajvekEXnm7oezaNm@venus> (raw)
In-Reply-To: <20260624123914.1767374-1-hello@superkali.me>
[-- Attachment #1: Type: text/plain, Size: 3905 bytes --]
Hi,
On Wed, Jun 24, 2026 at 02:39:14PM +0200, Daniele Briguglio wrote:
> No in-tree board references these gates yet. Boards drive the codec
> MCLK through the parent I2S*_8CH_MCLKOUT, and now that the gates are
> managed clocks, clk_disable_unused() turns them off at boot. On a board
> that relied on firmware leaving the output enabled, that cuts the MCLK
> and analog audio stops working.
>
> Mark the four gates CLK_IGNORE_UNUSED so an unreferenced gate keeps the
> state firmware left. A board that wants the kernel to own the gate can
> reference I2S*_8CH_MCLKOUT_TO_IO from DT instead.
>
> Fixes: 02b9b0bb6269 ("clk: rockchip: rk3588: add GATE_GRF clocks for I2S MCLK output to IO")
> Reported-by: Diederik de Haas <diederik@cknow-tech.com>
> Closes: https://lore.kernel.org/linux-rockchip/DJGDSS875DDO.22TYPVYK5X8KZ@cknow-tech.com/
> Tested-by: Diederik de Haas <diederik@cknow-tech.com>
> Signed-off-by: Daniele Briguglio <hello@superkali.me>
> ---
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Greetings,
-- Sebastian
> drivers/clk/rockchip/clk-rk3588.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3588.c b/drivers/clk/rockchip/clk-rk3588.c
> index 2ba9976654c..86953f9ffee 100644
> --- a/drivers/clk/rockchip/clk-rk3588.c
> +++ b/drivers/clk/rockchip/clk-rk3588.c
> @@ -895,7 +895,7 @@ static struct rockchip_clk_branch rk3588_early_clk_branches[] __initdata = {
> MUX(I2S2_2CH_MCLKOUT, "i2s2_2ch_mclkout", i2s2_2ch_mclkout_p, CLK_SET_RATE_PARENT,
> RK3588_CLKSEL_CON(30), 2, 1, MFLAGS),
> GATE_GRF(I2S2_2CH_MCLKOUT_TO_IO, "i2s2_2ch_mclkout_to_io", "i2s2_2ch_mclkout",
> - 0, RK3588_SYSGRF_SOC_CON6, 2, GFLAGS, grf_type_sys),
> + CLK_IGNORE_UNUSED, RK3588_SYSGRF_SOC_CON6, 2, GFLAGS, grf_type_sys),
>
> COMPOSITE(CLK_I2S3_2CH_SRC, "clk_i2s3_2ch_src", gpll_aupll_p, 0,
> RK3588_CLKSEL_CON(30), 8, 1, MFLAGS, 3, 5, DFLAGS,
> @@ -912,7 +912,7 @@ static struct rockchip_clk_branch rk3588_early_clk_branches[] __initdata = {
> MUX(I2S3_2CH_MCLKOUT, "i2s3_2ch_mclkout", i2s3_2ch_mclkout_p, CLK_SET_RATE_PARENT,
> RK3588_CLKSEL_CON(32), 2, 1, MFLAGS),
> GATE_GRF(I2S3_2CH_MCLKOUT_TO_IO, "i2s3_2ch_mclkout_to_io", "i2s3_2ch_mclkout",
> - 0, RK3588_SYSGRF_SOC_CON6, 7, GFLAGS, grf_type_sys),
> + CLK_IGNORE_UNUSED, RK3588_SYSGRF_SOC_CON6, 7, GFLAGS, grf_type_sys),
> GATE(PCLK_ACDCDIG, "pclk_acdcdig", "pclk_audio_root", 0,
> RK3588_CLKGATE_CON(7), 11, GFLAGS),
> GATE(HCLK_I2S0_8CH, "hclk_i2s0_8ch", "hclk_audio_root", 0,
> @@ -942,7 +942,7 @@ static struct rockchip_clk_branch rk3588_early_clk_branches[] __initdata = {
> MUX(I2S0_8CH_MCLKOUT, "i2s0_8ch_mclkout", i2s0_8ch_mclkout_p, CLK_SET_RATE_PARENT,
> RK3588_CLKSEL_CON(28), 2, 2, MFLAGS),
> GATE_GRF(I2S0_8CH_MCLKOUT_TO_IO, "i2s0_8ch_mclkout_to_io", "i2s0_8ch_mclkout",
> - 0, RK3588_SYSGRF_SOC_CON6, 0, GFLAGS, grf_type_sys),
> + CLK_IGNORE_UNUSED, RK3588_SYSGRF_SOC_CON6, 0, GFLAGS, grf_type_sys),
>
> GATE(HCLK_PDM1, "hclk_pdm1", "hclk_audio_root", 0,
> RK3588_CLKGATE_CON(9), 6, GFLAGS),
> @@ -2229,7 +2229,7 @@ static struct rockchip_clk_branch rk3588_early_clk_branches[] __initdata = {
> MUX(I2S1_8CH_MCLKOUT, "i2s1_8ch_mclkout", i2s1_8ch_mclkout_p, CLK_SET_RATE_PARENT,
> RK3588_PMU_CLKSEL_CON(9), 2, 2, MFLAGS),
> GATE_GRF(I2S1_8CH_MCLKOUT_TO_IO, "i2s1_8ch_mclkout_to_io", "i2s1_8ch_mclkout",
> - 0, RK3588_SYSGRF_SOC_CON6, 1, GFLAGS, grf_type_sys),
> + CLK_IGNORE_UNUSED, RK3588_SYSGRF_SOC_CON6, 1, GFLAGS, grf_type_sys),
> GATE(PCLK_PMU1, "pclk_pmu1", "pclk_pmu0_root", CLK_IS_CRITICAL,
> RK3588_PMU_CLKGATE_CON(1), 0, GFLAGS),
> GATE(CLK_DDR_FAIL_SAFE, "clk_ddr_fail_safe", "clk_pmu0", CLK_IGNORE_UNUSED,
>
> base-commit: 7edfb7fb58ee058298e18fde76a6077ef17d19d8
> --
> 2.47.3
>
>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
prev parent reply other threads:[~2026-06-24 13:42 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-24 12:39 [PATCH] clk: rockchip: rk3588: don't disable unused I2S MCLK output gates Daniele Briguglio
2026-06-24 13:42 ` Sebastian Reichel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ajvekEXnm7oezaNm@venus \
--to=sebastian.reichel@collabora.com \
--cc=diederik@cknow-tech.com \
--cc=heiko@sntech.de \
--cc=hello@superkali.me \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=nicolas.frattaroli@collabora.com \
--cc=ricardo@pardini.net \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox