From: Liviu Dudau <liviu.dudau@arm.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Cc: Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sudeep Holla <sudeep.holla@kernel.org>,
Lorenzo Pieralisi <lpieralisi@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: arm: Correct indentation
Date: Mon, 6 Jul 2026 11:50:17 +0100 [thread overview]
Message-ID: <akuIad1FdhC9rTqE@e142607> (raw)
In-Reply-To: <20260706101942.341681-2-krzysztof.kozlowski@oss.qualcomm.com>
On Mon, Jul 06, 2026 at 12:19:43PM +0200, Krzysztof Kozlowski wrote:
> Correct spaces or mix of tabs+spaces into proper tab-indented lines.
> No functional impact (same DTB).
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Best regards,
Liviu
> ---
>
> Ongoing bigger work for all bindings and DTS with built-in checker (dt-check-style).
> ---
> arch/arm/boot/dts/arm/arm-realview-eb.dtsi | 2 +-
> arch/arm/boot/dts/arm/arm-realview-pb1176.dts | 2 +-
> arch/arm/boot/dts/arm/arm-realview-pb11mp.dts | 6 +++---
> arch/arm/boot/dts/arm/arm-realview-pbx.dtsi | 6 +++---
> arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts | 4 ++--
> 5 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
> index ae370d4eb9d8..f90e28ee4cb9 100644
> --- a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
> +++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi
> @@ -51,7 +51,7 @@ vmmc: regulator-vmmc {
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> - };
> + };
>
> xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 {
> #clock-cells = <0>;
> diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
> index a75d8b107fe1..1cd095496832 100644
> --- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
> +++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts
> @@ -53,7 +53,7 @@ vmmc: regulator-vmmc {
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> - };
> + };
>
> veth: regulator-veth {
> compatible = "regulator-fixed";
> diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
> index 59c78def83f2..635b09030f60 100644
> --- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
> +++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts
> @@ -153,7 +153,7 @@ vmmc: regulator-vmmc {
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> - };
> + };
>
> veth: regulator-veth {
> compatible = "regulator-fixed";
> @@ -544,7 +544,7 @@ timer01: timer@10011000 {
> interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
> arm,sp804-has-irq = <1>;
> clocks = <&sp810_syscon 0>,
> - <&sp810_syscon 1>,
> + <&sp810_syscon 1>,
> <&pclk>;
> clock-names = "timer0clk",
> "timer1clk",
> @@ -558,7 +558,7 @@ timer23: timer@10012000 {
> interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
> arm,sp804-has-irq = <1>;
> clocks = <&sp810_syscon 2>,
> - <&sp810_syscon 3>,
> + <&sp810_syscon 3>,
> <&pclk>;
> clock-names = "timer0clk",
> "timer1clk",
> diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
> index 0d3d96ffa6e6..366c8baefe8c 100644
> --- a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
> +++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi
> @@ -52,7 +52,7 @@ vmmc: regulator-vmmc {
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> regulator-boot-on;
> - };
> + };
>
> veth: regulator-veth {
> compatible = "regulator-fixed";
> @@ -373,7 +373,7 @@ timer01: timer@10011000 {
> compatible = "arm,sp804", "arm,primecell";
> reg = <0x10011000 0x1000>;
> clocks = <&sp810_syscon0 0>,
> - <&sp810_syscon0 1>,
> + <&sp810_syscon0 1>,
> <&pclk>;
> clock-names = "timerclk0",
> "timerclk1",
> @@ -384,7 +384,7 @@ timer23: timer@10012000 {
> compatible = "arm,sp804", "arm,primecell";
> reg = <0x10012000 0x1000>;
> clocks = <&sp810_syscon0 2>,
> - <&sp810_syscon0 3>,
> + <&sp810_syscon0 3>,
> <&pclk>;
> clock-names = "timerclk2",
> "timerclk3",
> diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
> index 6ef23c53d2d8..64f87e6c12bf 100644
> --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
> +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts
> @@ -209,11 +209,11 @@ dma@7ff00000 {
> clock-names = "apb_pclk";
> };
>
> - scc@7fff0000 {
> + scc@7fff0000 {
> compatible = "arm,vexpress-scc,v2p-ca15_a7", "arm,vexpress-scc";
> reg = <0 0x7fff0000 0 0x1000>;
> interrupts = <0 95 4>;
> - };
> + };
>
> timer {
> compatible = "arm,armv7-timer";
> --
> 2.53.0
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
prev parent reply other threads:[~2026-07-06 10:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-06 10:19 [PATCH] ARM: dts: arm: Correct indentation Krzysztof Kozlowski
2026-07-06 10:50 ` Liviu Dudau [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=akuIad1FdhC9rTqE@e142607 \
--to=liviu.dudau@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=robh@kernel.org \
--cc=sudeep.holla@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox