[PATCHv5 1/2] ARM: socfpga: support suspend to ram

atull
2015-05-29T15:54:42Z

On Fri, 29 May 2015, Dinh Nguyen wrote:

>
>
> On 5/28/15 4:19 PM, Alan Tull wrote:
> > Add code that requests that the sdr controller go into
> > self-refresh mode. This code is run from ocram.
> >
> > Suspend-to-RAM and EDAC support are mutually exclusive on
> > SOCFPGA. If the EDAC is enabled, it will prevent the
> > platform from going into suspend.
> >
> > Example of how to request to suspend to ram:
> > $ echo enabled > \
> > /sys/devices/soc/ffc02000.serial0/tty/ttyS0/power/wakeup
> >
> > $ echo -n mem > /sys/power/state
> >
> > Signed-off-by: Alan Tull <atull@opensource.altera.com>
> > Cc: Pavel Machek <pavel@denx.de>
> > Cc: Arnd Bergmann <arnd@arndb.de>
> > Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
> > Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > ---
> > v2: use Generic on-chip SRAM driver to allocate ocram
> > rm fncpy_align since generic allocator handles alignment
> > check __arm_ioremap_exec return code
> > check for NULL pointers
> > add a comment regarding sdram controller configuration
> > v3: fix renamed #define
> > propagate socfpga_setup_ocram_self_refresh error code
> > v4: Kconfig: don't need to select GENERIC_ALLOCATER
> > add CONFIG_SOCFPGA_SUSPEND
> > make s2r and EDAC support mutually exclusive
> > socfpga.c: add sdr_ctl_base_addr
> > return error if ocram not available in device tree
> > update copyright years
> > v5: remove compile time dependency
> > edac driver will prevent suspend
> > don't configure scu standby mode; done in enable_scu().
> > fix comments about required sdram controller configuration
> > ---
> > arch/arm/mach-socfpga/Kconfig | 10 ++-
> > arch/arm/mach-socfpga/Makefile | 1 +
> > arch/arm/mach-socfpga/core.h | 6 +-
> > arch/arm/mach-socfpga/pm.c | 149 ++++++++++++++++++++++++++++++++++
> > arch/arm/mach-socfpga/self-refresh.S | 136 +++++++++++++++++++++++++++++++
> > arch/arm/mach-socfpga/socfpga.c | 6 +-
> > drivers/edac/altera_edac.c | 20 +++++
> > 7 files changed, 325 insertions(+), 3 deletions(-)
> > create mode 100644 arch/arm/mach-socfpga/pm.c
> > create mode 100644 arch/arm/mach-socfpga/self-refresh.S
> >
>
> Which branch are you basing this patch on? I got a trivial patch
> conflict in Kconfig when I applied to arm-soc/for-next and v4.1-rc5.

Based on your socfpga_for_next_arria10 branch from
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git

>
> Also, I'm getting these sparse warnings:
>
> arch/arm/mach-socfpga/pm.c:86:25: warning: incorrect type in argument 1
> (different address spaces)
> arch/arm/mach-socfpga/pm.c:86:25: expected void *<noident>
> arch/arm/mach-socfpga/pm.c:86:25: got void [noderef]
> <asn:2>*[assigned] suspend_ocram_base
> arch/arm/mach-socfpga/pm.c:108:52: warning: cast removes address space
> of expression
>
> Dinh
>

It appears to want suspend_ocram_base to be void * instead of void
__iomem *.

Alan