From mboxrd@z Thu Jan  1 00:00:00 1970
From: dinguyen@opensource.altera.com (Dinh Nguyen)
Date: Wed, 30 Mar 2016 12:11:14 -0500
Subject: [PATCH 6/7] ARM: socfpga: Enable Arria10 OCRAM ECC on startup
In-Reply-To: <1459351668-14622-7-git-send-email-tthayer@opensource.altera.com>
References: <1459351668-14622-1-git-send-email-tthayer@opensource.altera.com>
 <1459351668-14622-7-git-send-email-tthayer@opensource.altera.com>
Message-ID: <alpine.DEB.2.02.1603301209360.21508@linux-builds1>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On Wed, 30 Mar 2016, tthayer at opensource.altera.com wrote:

> From: Thor Thayer <tthayer@opensource.altera.com>
> 
> Enable ECC for Arria10 On-Chip RAM on machine startup. The ECC has to be
> enabled before data is stored in memory otherwise the ECC will fail
> on reads.
> 
> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
> ---

[snip]

> +
> +void socfpga_init_arria10_ocram_ecc(void)
> +{
> +	struct device_node *np;
> +	int ret;
> +
> +	/* Find the OCRAM EDAC device tree node */
> +	np = of_find_compatible_node(NULL, NULL, "altr,socfpga-a10-ocram-ecc");
> +	if (!np) {
> +		pr_err("Unable to find socfpga-a10-ocram-ecc\n");
> +		return;
> +	}
> +
> +	ret = altr_init_a10_ecc_block(np, A10_SYSMGR_ECC_INTSTAT_OCRAM,
> +				      ALTR_A10_OCRAM_ECC_EN_CTL, 0);

I think this is a no-no, you shouldn't be making a call directly into the driver
from here.

BR,
Dinh