From: atull@opensource.altera.com (atull)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi
Date: Wed, 1 Oct 2014 09:17:18 -0500 [thread overview]
Message-ID: <alpine.DEB.2.10.1410010915440.2332@shineypoop> (raw)
In-Reply-To: <20141001133527.GA12750@amd>
On Wed, 1 Oct 2014, Pavel Machek wrote:
> Hi!
>
> > From: Alan Tull <atull@opensource.altera.com>
> >
> > Use WFI when putting CPU1 to sleep. Don't hold CPU1 in reset
> > since that results in increased power consumption.
> >
> > Reset CPU1 briefly during CPU1 bootup.
> >
> > This has been tested for hotplug and suspend/resume and results
> > in no increased power consumption.
> >
> > Signed-off-by: Alan Tull <atull@opensource.altera.com>
> > ---
> > arch/arm/mach-socfpga/core.h | 2 ++
> > arch/arm/mach-socfpga/platsmp.c | 12 +++++++++---
> > 2 files changed, 11 insertions(+), 3 deletions(-)
> >
> > diff --git a/arch/arm/mach-socfpga/core.h b/arch/arm/mach-socfpga/core.h
> > index 572b8f7..c4a0929 100644
> > --- a/arch/arm/mach-socfpga/core.h
> > +++ b/arch/arm/mach-socfpga/core.h
> > @@ -28,6 +28,8 @@
> > #define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */
> > #define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */
> >
> > +#define RSTMGR_MPUMODRST_CPU1 0x2 /*CPU1 Reset*/
> > +
>
> It would be nice to have space after /* and before */.
Hi Pavel,
I will fix the comment space here and the other place you pointed out.
>
> > diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
> > index 5356a72..1d5f8ad 100644
> > --- a/arch/arm/mach-socfpga/platsmp.c
> > +++ b/arch/arm/mach-socfpga/platsmp.c
> > @@ -34,6 +34,10 @@ static int socfpga_boot_secondary(unsigned int cpu, struct task_struct *idle)
> > int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
> >
> > if (cpu1start_addr) {
> > + /* This will put CPU #1 into reset.*/
>
> Same here.
>
> > + __raw_writel(RSTMGR_MPUMODRST_CPU1,
> > + rst_manager_base_addr + 0x10);
>
> Would it be possible to copy reset manager description struct from
> u-boot and use it here, instead of raw offset?
I will replace this 0x10 with a macro that reflects how the register is
named in the register map.
Thanks for the review!
Alan
> Pavel
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>
next prev parent reply other threads:[~2014-10-01 14:17 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-24 20:27 [PATCH 0/2] socfpga: fix hotplug/add suspend to ram atull at opensource.altera.com
2014-09-24 20:27 ` [PATCH 1/2] socfpga: hotplug: put cpu1 in wfi atull at opensource.altera.com
2014-09-24 21:28 ` Russell King - ARM Linux
2014-09-25 15:06 ` atull
2014-10-01 13:35 ` Pavel Machek
2014-10-01 14:17 ` atull [this message]
2014-10-01 15:04 ` Pavel Machek
2014-10-01 16:07 ` Dinh Nguyen
2014-10-01 23:16 ` Pavel Machek
2014-10-02 11:36 ` Dinh Nguyen
2014-10-02 12:18 ` Arnd Bergmann
2014-10-02 21:03 ` atull
2014-09-24 20:27 ` [PATCH 2/2] socfpga: support suspend to ram atull at opensource.altera.com
2014-09-25 8:25 ` Steffen Trumtrar
2014-09-25 17:10 ` atull
2014-09-26 14:56 ` Dinh Nguyen
2014-09-26 20:23 ` atull
2014-10-01 13:49 ` Pavel Machek
2014-10-01 19:24 ` atull
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.DEB.2.10.1410010915440.2332@shineypoop \
--to=atull@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).