[PATCH 1/2] clocksource: enable pxa_timer for SA-1100 platform

Dmitry Eremin-Solenikov
2014-10-15T12:50:04Z

SA-11x0 platform used the same IP block as was used on PXA. Consequently
it makes sense to have only one driver. Enable pxa_timer clocksource for
StrongARM platform.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
drivers/clocksource/Kconfig | 6 ++++++
drivers/clocksource/Makefile | 2 +-
2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index cfd6519..fd99b08 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -216,4 +216,10 @@ config CLKSRC_VERSATILE
ARM Versatile, RealView and Versatile Express reference
platforms.

+config CLKSRC_PXA
+ def_bool y if ARCH_PXA || ARCH_SA1100
+ help
+ This enables OST0 support available on PXA and SA-11x0
+ platforms.
+
endmenu
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 7fd9fd1..6d9822e 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_ARCH_CLPS711X) += clps711x-timer.o
obj-$(CONFIG_ARCH_MARCO) += timer-marco.o
obj-$(CONFIG_ARCH_MOXART) += moxart_timer.o
obj-$(CONFIG_ARCH_MXS) += mxs_timer.o
-obj-$(CONFIG_ARCH_PXA) += pxa_timer.o
+obj-$(CONFIG_CLKSRC_PXA) += pxa_timer.o
obj-$(CONFIG_ARCH_PRIMA2) += timer-prima2.o
obj-$(CONFIG_ARCH_U300) += timer-u300.o
obj-$(CONFIG_SUN4I_TIMER) += sun4i_timer.o
--
2.1.1