public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: Ilkka Koskinen <ilkka@os.amperecomputing.com>
To: Hanjun Guo <guohanjun@huawei.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>,
	lorenzo.pieralisi@arm.com,  sudeep.holla@arm.com,
	rafael@kernel.org, linux@armlinux.org.uk,  lenb@kernel.org,
	robert.moore@intel.com, linux-acpi@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,  patches@amperecomputing.com,
	scott@os.amperecomputing.com,  darren@os.amperecomputing.com
Subject: Re: [PATCH v3 2/2] ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device
Date: Tue, 4 Jan 2022 23:10:23 -0800 (PST)	[thread overview]
Message-ID: <alpine.DEB.2.22.394.2201042306090.2515@ubuntu200401> (raw)
In-Reply-To: <f0fecf95-0b7d-eeec-94fd-76bea61fdd0f@huawei.com>


Hi Hanjun,

On Wed, 5 Jan 2022, Hanjun Guo wrote:
> Hi Ilkka,
>
> On 2021/12/31 11:37, Ilkka Koskinen wrote:
>> ACPI for Arm Components 1.1 Platform Design Document v1.1 [0] specifices
>> Arm Generic Diagnostic Device Interface (AGDI). It allows an admin to
>> issue diagnostic dump and reset via an SDEI event or an interrupt.
>> This patch implements SDEI path.
>> 
>> [0] https://developer.arm.com/documentation/den0093/latest/
>> 
>> Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
>> ---
>>   drivers/acpi/arm64/Kconfig  |   8 +++
>>   drivers/acpi/arm64/Makefile |   1 +
>>   drivers/acpi/arm64/agdi.c   | 125 ++++++++++++++++++++++++++++++++++++
>>   3 files changed, 134 insertions(+)
>>   create mode 100644 drivers/acpi/arm64/agdi.c
>> 
>> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
>> index 6dba187f4f2e..24869ba5b365 100644
>> --- a/drivers/acpi/arm64/Kconfig
>> +++ b/drivers/acpi/arm64/Kconfig
>> @@ -8,3 +8,11 @@ config ACPI_IORT
>>     config ACPI_GTDT
>>   	bool
>> +
>> +config ACPI_AGDI
>> +	bool "Arm Generic Diagnostic Dump and Reset Device Interface"
>> +	depends on ARM_SDE_INTERFACE
>> +	help
>> +	  Arm Generic Diagnostic Dump and Reset Device Interface (AGDI) is
>> +	  a standard that enables issuing a non-maskable diagnostic dump and
>> +	  reset command.
>> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
>> index 66acbe77f46e..7b9e4045659d 100644
>> --- a/drivers/acpi/arm64/Makefile
>> +++ b/drivers/acpi/arm64/Makefile
>> @@ -1,4 +1,5 @@
>>   # SPDX-License-Identifier: GPL-2.0-only
>> +obj-$(CONFIG_ACPI_AGDI) 	+= agdi.o
>>   obj-$(CONFIG_ACPI_IORT) 	+= iort.o
>>   obj-$(CONFIG_ACPI_GTDT) 	+= gtdt.o
>>   obj-y				+= dma.o
>> diff --git a/drivers/acpi/arm64/agdi.c b/drivers/acpi/arm64/agdi.c
>> new file mode 100644
>> index 000000000000..6525ccbae5c1
>> --- /dev/null
>> +++ b/drivers/acpi/arm64/agdi.c
>> @@ -0,0 +1,125 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * This file implements handling of
>> + * Arm Generic Diagnostic Dump and Reset Interface table (AGDI)
>> + *
>> + * Copyright (c) 2021, Ampere Computing LLC
>> + */
>> +
>> +#define pr_fmt(fmt) "ACPI: AGDI: " fmt
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/module.h>
>> +#include <linux/kernel.h>
>> +#include <linux/acpi.h>
>> +#include <linux/arm_sdei.h>
>> +#include <linux/io.h>
>
> Please keep the head files in alphabetical order.

I'll fix the include lines

>
>> +
>> +struct agdi_data {
>> +	int sdei_event;
>> +};
>> +
>> +static int agdi_sdei_handler(u32 sdei_event, struct pt_regs *regs, void 
>> *arg)
>> +{
>> +	nmi_panic(regs, "Arm Generic Diagnostic Dump and Reset SDEI event 
>> issued");
>> +	return 0;
>> +}
>> +
>> +static int agdi_sdei_probe(struct platform_device *pdev,
>> +			   struct agdi_data *adata)
>> +{
>> +	int err;
>> +
>> +	err = sdei_event_register(adata->sdei_event, agdi_sdei_handler, 
>> pdev);
>> +	if (err) {
>> +		dev_err(&pdev->dev, "Failed to register for SDEI event %d",
>> +			adata->sdei_event);
>> +		return err;
>> +	}
>> +
>> +	err = sdei_event_enable(adata->sdei_event);
>> +	if (err)  {
>> +		sdei_event_unregister(adata->sdei_event);
>> +		dev_err(&pdev->dev, "Failed to enable event %d\n",
>> +			adata->sdei_event);
>> +		return err;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int agdi_probe(struct platform_device *pdev)
>> +{
>> +	struct agdi_data *adata;
>> +
>> +	adata = dev_get_platdata(&pdev->dev);
>> +	if (!adata)
>> +		return -EINVAL;
>> +
>> +	return agdi_sdei_probe(pdev, adata);
>> +}
>> +
>> +static int agdi_remove(struct platform_device *pdev)
>> +{
>> +	struct agdi_data *adata = platform_get_drvdata(pdev);
>> +
>> +	sdei_event_disable(adata->sdei_event);
>> +	sdei_event_unregister(adata->sdei_event);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct platform_driver agdi_driver = {
>> +	.driver = {
>> +		.name = "agdi",
>> +	},
>> +	.probe = agdi_probe,
>> +	.remove = agdi_remove,
>> +};
>> +
>> +static int __init agdi_init(void)
>> +{
>> +	int ret;
>> +	acpi_status status;
>> +	struct acpi_table_agdi *agdi_table;
>> +	struct agdi_data pdata;
>> +	struct platform_device *pdev;
>> +
>> +	if (acpi_disabled)
>> +		return 0;
>> +
>> +	status = acpi_get_table(ACPI_SIG_AGDI, 0,
>> +				(struct acpi_table_header **) &agdi_table);
>> +	if (ACPI_FAILURE(status))
>> +		return -ENODEV;
>> +
>> +	if (agdi_table->flags & ACPI_AGDI_SIGNALING_MODE) {
>> +		pr_warn("Interrupt signaling is not supported");
>> +		ret = -ENODEV;
>> +		goto err_put_table;
>> +	}
>> +
>> +	pdata.sdei_event = agdi_table->sdei_event;
>> +
>> +	pdev = platform_device_register_data(NULL, "agdi", 0, &pdata, 
>> sizeof(pdata));
>> +	if (IS_ERR(pdev)) {
>> +		ret = PTR_ERR(pdev);
>> +		goto err_put_table;
>> +	}
>> +
>> +	ret = platform_driver_register(&agdi_driver);
>> +	if (ret)
>> +		goto err_device_unregister;
>> +
>> +	acpi_put_table((struct acpi_table_header *)agdi_table);
>> +	return 0;
>> +
>> +err_device_unregister:
>> +	platform_device_unregister(pdev);
>> +err_put_table:
>> +	acpi_put_table((struct acpi_table_header *)agdi_table);
>> +	return ret;
>> +}
>> +device_initcall(agdi_init);
>
> The rest are looking good to me.

I'm glad to hear that

> Thanks
> Hanjun
>

Cheers, Ilkka

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2022-01-05  7:12 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-31  3:37 [PATCH v3 0/2] ACPI: Arm Generic Diagnostic Dump and Reset device Ilkka Koskinen
2021-12-31  3:37 ` [PATCH v3 1/2] ACPI: tables: Add AGDI to the list of known table signatures Ilkka Koskinen
2021-12-31  3:37 ` [PATCH v3 2/2] ACPI: AGDI: Add driver for Arm Generic Diagnostic Dump and Reset device Ilkka Koskinen
2022-01-04 14:28   ` Rafael J. Wysocki
2022-01-05  7:05     ` Ilkka Koskinen
2022-01-05  1:34   ` Hanjun Guo
2022-01-05  7:10     ` Ilkka Koskinen [this message]
2022-01-05 10:46   ` Lorenzo Pieralisi
2022-01-05 23:46     ` Ilkka Koskinen
2022-01-14  2:17       ` Ilkka Koskinen
2022-01-20 16:38         ` Lorenzo Pieralisi
2022-01-25 23:04           ` Ilkka Koskinen
2021-12-31 10:25 ` [PATCH v3 0/2] ACPI: " Russell King (Oracle)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.DEB.2.22.394.2201042306090.2515@ubuntu200401 \
    --to=ilkka@os.amperecomputing.com \
    --cc=darren@os.amperecomputing.com \
    --cc=guohanjun@huawei.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=patches@amperecomputing.com \
    --cc=rafael@kernel.org \
    --cc=robert.moore@intel.com \
    --cc=scott@os.amperecomputing.com \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox