Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: tglx@linutronix.de (Thomas Gleixner)
To: linux-arm-kernel@lists.infradead.org
Subject: [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support
Date: Fri, 11 Mar 2011 21:37:50 +0100 (CET)	[thread overview]
Message-ID: <alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6> (raw)
In-Reply-To: <4D7A80DD.7000909@codeaurora.org>

On Fri, 11 Mar 2011, Abhijeet Dharmapurikar wrote:
> Thomas Gleixner wrote:
> > Simply because this kind of misdesigned hardware will creep up over
> > and over and we want to handle these cases in the core. Even for a
> > sinlge instance like yours solving it in the core is the right thing
> > to do, because it's a ~3 lines patch to the core code to get this
> > done.
> 
> ~3 lines patch to the code sounds promising. Please tell me how?

So I deduce, that your HW has no way to mark the wakeup
interrupts. Whack your HW designer on my behalf, please! :)

Patch below against:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core

It's 8 lines, but that's still at least an order of magnitude less
than solving this with an workaround. :)

Thanks,

	tglx

---------->
Subject: genirq-force-mask-on-suspend.patch
From: Thomas Gleixner <tglx@linutronix.de>
Date: Fri, 11 Mar 2011 21:22:14 +0100

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
 include/linux/irq.h |    2 ++
 kernel/irq/pm.c     |   14 ++++++++++----
 2 files changed, 12 insertions(+), 4 deletions(-)

Index: linux-2.6-tip/include/linux/irq.h
===================================================================
--- linux-2.6-tip.orig/include/linux/irq.h
+++ linux-2.6-tip/include/linux/irq.h
@@ -330,10 +330,12 @@ struct irq_chip {
  *
  * IRQCHIP_SET_TYPE_MASKED:	Mask before calling chip.irq_set_type()
  * IRQCHIP_EOI_IF_HANDLED:	Only issue irq_eoi() when irq was handled
+ * IRQCHIP_MASK_ON_SUSPEND:	Mask non wake irqs in the suspend path
  */
 enum {
 	IRQCHIP_SET_TYPE_MASKED		= (1 <<  0),
 	IRQCHIP_EOI_IF_HANDLED		= (1 <<  1),
+	IRQCHIP_MASK_ON_SUSPEND		= (2 <<  1),
 };
 
 /* This include will go away once we isolated irq_desc usage to core code */
Index: linux-2.6-tip/kernel/irq/pm.c
===================================================================
--- linux-2.6-tip.orig/kernel/irq/pm.c
+++ linux-2.6-tip/kernel/irq/pm.c
@@ -68,10 +68,16 @@ int check_wakeup_irqs(void)
 	struct irq_desc *desc;
 	int irq;
 
-	for_each_irq_desc(irq, desc)
-		if (irqd_is_wakeup_set(&desc->irq_data) &&
-		    (desc->istate & IRQS_PENDING))
-			return -EBUSY;
+	for_each_irq_desc(irq, desc) {
+		if (irqd_is_wakeup_set(&desc->irq_data)) {
+			if (desc->istate & IRQS_PENDING)
+				return -EBUSY;
+			continue;
+		}
+		if (desc->istate & IRQS_SUSPENDED &&
+		    irq_desc_get_chip(desc)->flags & IRQCHIP_MASK_ON_SUSPEND)
+			mask_irq(desc);
+	}
 
 	return 0;
 }

  reply	other threads:[~2011-03-11 20:37 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-08  6:09 [Qualcomm PM8921 MFD v2 0/6] pmic 8921 core and subdevices adharmap at codeaurora.org
2011-03-08  6:09 ` [Qualcomm PM8921 MFD v2 1/6] mfd: pm8921: Add PMIC 8921 core driver adharmap at codeaurora.org
2011-03-08 17:58   ` Randy Dunlap
2011-03-08  6:09 ` [Qualcomm PM8921 MFD v2 2/6] mfd: pm8xxx: Add irq support adharmap at codeaurora.org
2011-03-08 12:04   ` Thomas Gleixner
2011-03-09  5:21     ` Abhijeet Dharmapurikar
2011-03-10 10:32       ` Thomas Gleixner
2011-03-11  4:43         ` Abhijeet Dharmapurikar
2011-03-11 17:57           ` Thomas Gleixner
2011-03-11 19:02             ` Abhijeet Dharmapurikar
2011-03-11 19:43               ` Thomas Gleixner
2011-03-11 19:57                 ` Mark Brown
2011-03-11 20:12                   ` Thomas Gleixner
2011-03-11 20:06                 ` Abhijeet Dharmapurikar
2011-03-11 20:37                   ` Thomas Gleixner [this message]
2011-03-12  0:13                     ` Abhijeet Dharmapurikar
2011-03-08  6:09 ` [Qualcomm PM8921 MFD v2 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver adharmap at codeaurora.org
2011-03-12  9:36   ` Grant Likely
2011-03-16 18:55     ` Abhijeet Dharmapurikar
2011-03-16 19:54       ` Grant Likely
2011-03-16 19:56         ` Mark Brown
2011-03-16 23:06           ` Grant Likely
2011-03-08  6:09 ` [Qualcomm PM8921 MFD v2 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver adharmap at codeaurora.org
2011-03-08 23:30   ` Mark Brown
2011-03-10  3:36     ` Abhijeet Dharmapurikar
2011-03-10  3:56       ` Trilok Soni
2011-03-10 15:13       ` Mark Brown
2011-03-08  6:09 ` [Qualcomm PM8921 MFD v2 5/6] MAINTAINERS: Add patterns for pmic 8921 files to MSM subsystem adharmap at codeaurora.org
2011-03-08 23:31   ` Mark Brown
2011-03-08  6:09 ` [Qualcomm PM8921 MFD v2 6/6] msm: board-8960: Add support for pm8921 adharmap at codeaurora.org

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.00.1103112112310.2787@localhost6.localdomain6 \
    --to=tglx@linutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox