Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 1/7] ARM: kernel: enhance MPIDR macro definitions
Date: Mon, 19 Nov 2012 10:37:36 -0500 (EST)	[thread overview]
Message-ID: <alpine.LFD.2.02.1211191037110.1182@xanadu.home> (raw)
In-Reply-To: <1353329106-24084-2-git-send-email-lorenzo.pieralisi@arm.com>

On Mon, 19 Nov 2012, Lorenzo Pieralisi wrote:

> Kernel subsystems other than the topology layer need the MPIDR
> mask definitions to access the MPIDR without relying on hardcoded
> masks. This patch moves the MPIDR register masks definition to
> a header file and defines a macro to simplify access to MPIDR bit fields
> representing affinity levels.
> 
> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Acked-by: Nicolas Pitre <nico@linaro.org>

> ---
>  arch/arm/include/asm/cputype.h | 13 +++++++++++++
>  arch/arm/kernel/topology.c     | 27 +--------------------------
>  2 files changed, 14 insertions(+), 26 deletions(-)
> 
> diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
> index cb47d28..a59dcb5 100644
> --- a/arch/arm/include/asm/cputype.h
> +++ b/arch/arm/include/asm/cputype.h
> @@ -25,6 +25,19 @@
>  #define CPUID_EXT_ISAR4	"c2, 4"
>  #define CPUID_EXT_ISAR5	"c2, 5"
>  
> +#define MPIDR_SMP_BITMASK (0x3 << 30)
> +#define MPIDR_SMP_VALUE (0x2 << 30)
> +
> +#define MPIDR_MT_BITMASK (0x1 << 24)
> +
> +#define MPIDR_HWID_BITMASK 0xFFFFFF
> +
> +#define MPIDR_LEVEL_BITS 8
> +#define MPIDR_LEVEL_MASK ((1 << MPIDR_LEVEL_BITS) - 1)
> +
> +#define MPIDR_AFFINITY_LEVEL(mpidr, level) \
> +	((mpidr >> (MPIDR_LEVEL_BITS * level)) & MPIDR_LEVEL_MASK)
> +
>  extern unsigned int processor_id;
>  
>  #ifdef CONFIG_CPU_CP15
> diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
> index 317dac6..4642c7d 100644
> --- a/arch/arm/kernel/topology.c
> +++ b/arch/arm/kernel/topology.c
> @@ -196,32 +196,7 @@ static inline void parse_dt_topology(void) {}
>  static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
>  #endif
>  
> -
> -/*
> - * cpu topology management
> - */
> -
> -#define MPIDR_SMP_BITMASK (0x3 << 30)
> -#define MPIDR_SMP_VALUE (0x2 << 30)
> -
> -#define MPIDR_MT_BITMASK (0x1 << 24)
> -
> -/*
> - * These masks reflect the current use of the affinity levels.
> - * The affinity level can be up to 16 bits according to ARM ARM
> - */
> -#define MPIDR_HWID_BITMASK 0xFFFFFF
> -
> -#define MPIDR_LEVEL0_MASK 0x3
> -#define MPIDR_LEVEL0_SHIFT 0
> -
> -#define MPIDR_LEVEL1_MASK 0xF
> -#define MPIDR_LEVEL1_SHIFT 8
> -
> -#define MPIDR_LEVEL2_MASK 0xFF
> -#define MPIDR_LEVEL2_SHIFT 16
> -
> -/*
> + /*
>   * cpu topology table
>   */
>  struct cputopo_arm cpu_topology[NR_CPUS];
> -- 
> 1.7.12
> 
> 

  parent reply	other threads:[~2012-11-19 15:37 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-19 12:44 [PATCH v4 0/7] ARM: multi-cluster aware boot protocol Lorenzo Pieralisi
2012-11-19 12:45 ` [PATCH v4 1/7] ARM: kernel: enhance MPIDR macro definitions Lorenzo Pieralisi
2012-11-19 13:44   ` Will Deacon
2012-11-19 15:37   ` Nicolas Pitre [this message]
2012-11-19 12:45 ` [PATCH v4 2/7] ARM: kernel: update topology to use new MPIDR macros Lorenzo Pieralisi
2012-11-19 13:45   ` Will Deacon
2012-11-19 15:38   ` Nicolas Pitre
2012-11-19 12:45 ` [PATCH v4 3/7] ARM: kernel: smp_setup_processor_id() updates Lorenzo Pieralisi
2012-11-19 13:45   ` Will Deacon
2012-11-19 12:45 ` [PATCH v4 4/7] ARM: kernel: add device tree init map function Lorenzo Pieralisi
2012-11-19 13:54   ` Mark Rutland
2012-11-19 14:07     ` Lorenzo Pieralisi
2012-11-19 12:45 ` [PATCH v4 5/7] ARM: kernel: add cpu logical map DT init in setup_arch Lorenzo Pieralisi
2012-11-19 12:45 ` [PATCH v4 6/7] ARM: kernel: add logical mappings look-up Lorenzo Pieralisi
2012-11-19 12:45 ` [PATCH v4 7/7] ARM: gic: use a private mapping for CPU target interfaces Lorenzo Pieralisi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.02.1211191037110.1182@xanadu.home \
    --to=nicolas.pitre@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox