From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/16] ARM: b.L: secondary kernel entry code
Date: Thu, 10 Jan 2013 11:47:09 -0500 (EST) [thread overview]
Message-ID: <alpine.LFD.2.02.1301101132080.6300@xanadu.home> (raw)
In-Reply-To: <CAHkRjk65PEVDS6vi=07g_hef8yXOR+mTYV_Nchu1fAuLnOJLOw@mail.gmail.com>
On Thu, 10 Jan 2013, Catalin Marinas wrote:
> Hi Nico,
>
> On 10 January 2013 00:20, Nicolas Pitre <nicolas.pitre@linaro.org> wrote:
> > --- /dev/null
> > +++ b/arch/arm/common/bL_entry.c
> ...
> > +extern volatile unsigned long bL_entry_vectors[BL_NR_CLUSTERS][BL_CPUS_PER_CLUSTER];
>
> IMHO, we should keep this array linear and ignore the cluster grouping
> at this stage. This information could be added to latter patches that
> actually need to know about the b.L topology.
That's virtually all of them. Everything b.L related is always
expressed in terms of a cpu,cluster tuple at the low level.
> This would also imply that we treat the MPIDR just as an ID without
> digging into its bit layout.
That makes for too large an index space. We always end up needing to
break the MPIDR into a cpu,cluster thing as the MPIDR bits are too
sparse.
> > +void bL_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
> > +{
> > + unsigned long val = ptr ? virt_to_phys(ptr) : 0;
> > + bL_entry_vectors[cluster][cpu] = val;
> > + smp_wmb();
> > + __cpuc_flush_dcache_area((void *)&bL_entry_vectors[cluster][cpu], 4);
> > + outer_clean_range(__pa(&bL_entry_vectors[cluster][cpu]),
> > + __pa(&bL_entry_vectors[cluster][cpu + 1]));
>
> Why are you using the smp_wmb() here? We don't need any barrier since
> data cache ops by MVA are automatically ordered in relation to stores
> to the same MVA (as long as the MVA is in Normal Cacheable memory).
That was the result of monkeying the write_pen_release() code. I'll
remove that as the rest of the code added later doesn't use that anyway.
> > --- /dev/null
> > +++ b/arch/arm/common/bL_head.S
> ...
> > +ENTRY(bL_entry_point)
> > +
> > + THUMB( adr r12, BSYM(1f) )
> > + THUMB( bx r12 )
> > + THUMB( .thumb )
> > +1:
> > + mrc p15, 0, r0, c0, c0, 5
>
> Minor thing, maybe a comment for this line like @ MPIDR.
ACK.
Nicolas
next prev parent reply other threads:[~2013-01-10 16:47 UTC|newest]
Thread overview: 132+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-10 0:20 [PATCH 00/16] big.LITTLE low-level CPU and cluster power management Nicolas Pitre
2013-01-10 0:20 ` [PATCH 01/16] ARM: b.L: secondary kernel entry code Nicolas Pitre
2013-01-10 7:12 ` Stephen Boyd
2013-01-10 15:30 ` Nicolas Pitre
2013-01-10 15:34 ` Catalin Marinas
2013-01-10 16:47 ` Nicolas Pitre [this message]
2013-01-11 11:45 ` Catalin Marinas
2013-01-11 12:05 ` Lorenzo Pieralisi
2013-01-11 12:19 ` Dave Martin
2013-01-10 23:05 ` Will Deacon
2013-01-11 1:26 ` Nicolas Pitre
2013-01-11 10:55 ` Will Deacon
2013-01-11 11:35 ` Dave Martin
2013-01-11 17:16 ` Santosh Shilimkar
2013-01-11 18:10 ` Nicolas Pitre
2013-01-11 18:30 ` Santosh Shilimkar
2013-03-07 7:37 ` Pavel Machek
2013-03-07 8:57 ` Nicolas Pitre
2013-01-10 0:20 ` [PATCH 02/16] ARM: b.L: introduce the CPU/cluster power API Nicolas Pitre
2013-01-10 23:08 ` Will Deacon
2013-01-11 2:30 ` Nicolas Pitre
2013-01-11 10:58 ` Will Deacon
2013-01-11 11:29 ` Dave Martin
2013-01-11 17:26 ` Santosh Shilimkar
2013-01-11 18:33 ` Nicolas Pitre
2013-01-11 18:41 ` Santosh Shilimkar
2013-01-11 19:54 ` Nicolas Pitre
2013-01-10 0:20 ` [PATCH 03/16] ARM: b.L: introduce helpers for platform coherency exit/setup Nicolas Pitre
2013-01-10 12:01 ` Dave Martin
2013-01-10 19:04 ` Nicolas Pitre
2013-01-11 11:30 ` Dave Martin
2013-01-10 16:53 ` Catalin Marinas
2013-01-10 17:59 ` Nicolas Pitre
2013-01-10 21:50 ` Catalin Marinas
2013-01-10 22:31 ` Nicolas Pitre
2013-01-11 10:36 ` Dave Martin
2013-01-10 22:32 ` Nicolas Pitre
2013-01-10 23:13 ` Will Deacon
2013-01-11 1:50 ` Nicolas Pitre
2013-01-11 11:09 ` Dave Martin
2013-01-11 17:46 ` Santosh Shilimkar
2013-01-11 18:07 ` Dave Martin
2013-01-11 18:34 ` Santosh Shilimkar
2013-01-14 17:08 ` Dave Martin
2013-01-14 17:15 ` Catalin Marinas
2013-01-14 18:10 ` Dave Martin
2013-01-14 21:34 ` Catalin Marinas
2013-01-10 0:20 ` [PATCH 04/16] ARM: b.L: Add baremetal voting mutexes Nicolas Pitre
2013-01-10 23:18 ` Will Deacon
2013-01-11 3:15 ` Nicolas Pitre
2013-01-11 11:03 ` Will Deacon
2013-01-11 16:57 ` Dave Martin
2013-01-10 0:20 ` [PATCH 05/16] ARM: bL_head: vlock-based first man election Nicolas Pitre
2013-01-10 0:20 ` [PATCH 06/16] ARM: b.L: generic SMP secondary bringup and hotplug support Nicolas Pitre
2013-01-11 18:02 ` Santosh Shilimkar
2013-01-14 18:05 ` Achin Gupta
2013-01-15 6:32 ` Santosh Shilimkar
2013-01-15 11:18 ` Achin Gupta
2013-01-15 11:26 ` Santosh Shilimkar
2013-01-15 18:53 ` Dave Martin
2013-01-14 16:35 ` Will Deacon
2013-01-14 16:51 ` Nicolas Pitre
2013-01-15 19:09 ` Dave Martin
2013-01-10 0:20 ` [PATCH 07/16] ARM: bL_platsmp.c: close the kernel entry gate before hot-unplugging a CPU Nicolas Pitre
2013-01-14 16:37 ` Will Deacon
2013-01-14 16:53 ` Nicolas Pitre
2013-01-14 17:00 ` Will Deacon
2013-01-14 17:11 ` Catalin Marinas
2013-01-14 17:15 ` Nicolas Pitre
2013-01-14 17:23 ` Will Deacon
2013-01-14 18:26 ` Russell King - ARM Linux
2013-01-14 18:49 ` Nicolas Pitre
2013-01-15 18:40 ` Dave Martin
2013-01-16 16:06 ` Catalin Marinas
2013-01-10 0:20 ` [PATCH 08/16] ARM: bL_platsmp.c: make sure the GIC interface of a dying CPU is disabled Nicolas Pitre
2013-01-11 18:07 ` Santosh Shilimkar
2013-01-11 19:07 ` Nicolas Pitre
2013-01-12 6:50 ` Santosh Shilimkar
2013-01-12 16:47 ` Nicolas Pitre
2013-01-13 4:37 ` Santosh Shilimkar
2013-01-14 17:53 ` Lorenzo Pieralisi
2013-01-14 16:39 ` Will Deacon
2013-01-14 16:54 ` Nicolas Pitre
2013-01-14 17:02 ` Will Deacon
2013-01-14 17:18 ` Nicolas Pitre
2013-01-14 17:24 ` Will Deacon
2013-01-14 17:56 ` Lorenzo Pieralisi
2013-01-10 0:20 ` [PATCH 09/16] ARM: vexpress: Select the correct SMP operations at run-time Nicolas Pitre
2013-01-10 0:20 ` [PATCH 10/16] ARM: vexpress: introduce DCSCB support Nicolas Pitre
2013-01-11 18:12 ` Santosh Shilimkar
2013-01-11 19:13 ` Nicolas Pitre
2013-01-12 6:52 ` Santosh Shilimkar
2013-01-10 0:20 ` [PATCH 11/16] ARM: vexpress/dcscb: add CPU use counts to the power up/down API implementation Nicolas Pitre
2013-01-10 0:20 ` [PATCH 12/16] ARM: vexpress/dcscb: do not hardcode number of CPUs per cluster Nicolas Pitre
2013-01-10 0:20 ` [PATCH 13/16] drivers: misc: add ARM CCI support Nicolas Pitre
2013-01-11 18:20 ` Santosh Shilimkar
2013-01-11 19:22 ` Nicolas Pitre
2013-01-12 6:53 ` Santosh Shilimkar
2013-01-15 18:34 ` Dave Martin
2013-01-10 0:20 ` [PATCH 14/16] ARM: TC2: ensure powerdown-time data is flushed from cache Nicolas Pitre
2013-01-10 18:50 ` Dave Martin
2013-01-10 19:13 ` Nicolas Pitre
2013-01-11 11:38 ` Dave Martin
2013-01-10 0:20 ` [PATCH 15/16] ARM: vexpress/dcscb: handle platform coherency exit/setup and CCI Nicolas Pitre
2013-01-10 12:05 ` Dave Martin
2013-01-11 18:27 ` Santosh Shilimkar
2013-01-11 19:28 ` Nicolas Pitre
2013-01-12 7:21 ` Santosh Shilimkar
2013-01-14 12:25 ` Lorenzo Pieralisi
2013-01-15 6:23 ` Santosh Shilimkar
2013-01-15 18:20 ` Dave Martin
2013-01-16 6:33 ` Santosh Shilimkar
2013-01-16 10:03 ` Lorenzo Pieralisi
2013-01-16 10:12 ` Santosh Shilimkar
2013-01-10 0:20 ` [PATCH 16/16] ARM: vexpress/dcscb: probe via device tree Nicolas Pitre
2013-01-10 0:46 ` [PATCH 00/16] big.LITTLE low-level CPU and cluster power management Rob Herring
2013-01-10 5:04 ` Nicolas Pitre
2013-01-10 23:01 ` Will Deacon
2013-01-14 9:56 ` Joseph Lo
2013-01-14 14:05 ` Nicolas Pitre
2013-01-15 2:44 ` Joseph Lo
2013-01-15 16:44 ` Nicolas Pitre
2013-01-16 16:02 ` Catalin Marinas
2013-01-16 21:18 ` Nicolas Pitre
2013-01-17 17:55 ` Catalin Marinas
2013-01-15 18:31 ` Dave Martin
2013-03-07 8:27 ` Pavel Machek
2013-03-07 9:12 ` Nicolas Pitre
2013-03-07 9:40 ` Pavel Machek
2013-03-07 9:56 ` Nicolas Pitre
2013-03-07 14:51 ` Pavel Machek
2013-03-07 15:42 ` Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LFD.2.02.1301101132080.6300@xanadu.home \
--to=nicolas.pitre@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).