Re: [PATCH v3 1/3] media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams

[Frank Li <Frank.li@oss.nxp.com>]

On Thu, Jul 23, 2026 at 05:16:37PM +0800, Guoniu Zhou wrote:
> The ISI crossbar needs to properly enable multiple streams from different
> virtual channels on the same input pad. Currently only the first stream
> gets enabled in hardware, subsequent streams are silently ignored.
>
> The driver uses a single enable_count per input to track the input state.
> When enable_count is non-zero, the code assumes the input is already active
> and skips calling v4l2_subdev_enable_streams() for additional streams:
>
>   Call 1: enable_streams(stream 0)
>     -> enable_count == 0, enable gasket and stream 0 in hardware
>     -> enable_count = 1
>
>   Call 2: enable_streams(stream 1)
>     -> enable_count == 1, skip hardware enable
>     -> enable_count = 2
>     -> stream 1 never gets enabled
>
> Similarly on disable, when enable_count reaches zero, ALL streams are
> disabled regardless of which streams are actually still active.
>
> Implement per-stream state tracking by storing the input index and stream
> mask in the mxc_isi_pipe structure. On enable, record which input and
> stream the pipe is receiving. On disable, clear the pipe's record and
> check if any other pipe is still using the same input stream before
> actually disabling it.
>
> Signed-off-by: Guoniu Zhou <guoniu.zhou@oss.nxp.com>
> ---
> Changes in v3:
> - Change from "Fix" to "Implement" as multi-stream support is for newer
>   SoCs not present when the driver was merged (Laurent)
> - Remove Fixes and Cc: stable tags (Laurent)
> - Store input/input_stream in mxc_isi_pipe instead of using per-stream
>   counters array, avoiding arbitrary 64-entry limit (Laurent)
> - Use UINT_MAX to mark pipe as inactive to distinguish from valid pad 0
>
> Changes in v2:
> - Use fixed-size array for enabled_count instead of dynamic allocation
> - Use BIT_ULL() macro for u64 bitmask operations
> - Use MXC_ISI_MAX_STREAMS (64) as loop boundary instead of num_sources
> - Remove mxc_isi_stream_counters_alloc/free functions
> ---
>  .../media/platform/nxp/imx8-isi/imx8-isi-core.h    |  5 +-
>  .../platform/nxp/imx8-isi/imx8-isi-crossbar.c      | 66 +++++++++++++++-------
>  .../media/platform/nxp/imx8-isi/imx8-isi-pipe.c    |  1 +
>  3 files changed, 52 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> index 9bb4d430d15e..c07abdd6a1f0 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-core.h
> @@ -186,7 +186,7 @@ struct mxc_isi_dma_buffer {
>  };
>
>  struct mxc_isi_input {
> -	unsigned int			enable_count;
> +	u64				enabled_streams;
>  };
>
>  struct mxc_isi_crossbar {
> @@ -259,6 +259,9 @@ struct mxc_isi_pipe {
>  	u8				acquired_res;
>  	u8				chained_res;
>  	bool				chained;
> +
> +	unsigned int			input;
> +	u64				input_stream;
>  };
>
>  struct mxc_isi_m2m {
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> index 9f0231ca47a3..6bd61bfb15d6 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-crossbar.c
> @@ -335,8 +335,10 @@ static int mxc_isi_crossbar_enable_streams(struct v4l2_subdev *sd,
>  					   u32 pad, u64 streams_mask)
>  {
>  	struct mxc_isi_crossbar *xbar = to_isi_crossbar(sd);
> +	struct mxc_isi_pipe *pipe = &xbar->isi->pipes[pad - xbar->num_sinks];
>  	struct v4l2_subdev *remote_sd;
>  	struct mxc_isi_input *input;
> +	u64 streams_to_enable;
>  	u64 sink_streams;
>  	u32 sink_pad;
>  	u32 remote_pad;
> @@ -350,30 +352,41 @@ static int mxc_isi_crossbar_enable_streams(struct v4l2_subdev *sd,
>
>  	input = &xbar->inputs[sink_pad];
>
> -	/*
> -	 * TODO: Track per-stream enable counts to support multiplexed
> -	 * streams.
> -	 */
> -	if (!input->enable_count) {
> +	/* Enable the gasket when the first stream is enabled for this input. */
> +	if (!input->enabled_streams) {

The similar with disable case, if other pipe already enable it, do we need
skip call mxc_isi_crossbar_gasket_enable()?

enable() and disable() is not symmetric

Frank

>  		ret = mxc_isi_crossbar_gasket_enable(xbar, state, remote_sd,
>  						     remote_pad, sink_pad);
>  		if (ret)
>  			return ret;
> +	}
> +
> +	/* Only enable streams that are not already enabled. */
> +	streams_to_enable = sink_streams & ~input->enabled_streams;
>
> +	if (streams_to_enable) {
>  		ret = v4l2_subdev_enable_streams(remote_sd, remote_pad,
> -						 sink_streams);
> +						 streams_to_enable);
>  		if (ret) {
>  			dev_err(xbar->isi->dev,
>  				"failed to enable streams 0x%llx on '%s':%u: %d\n",
> -				sink_streams, remote_sd->name, remote_pad, ret);
> -			mxc_isi_crossbar_gasket_disable(xbar, sink_pad);
> -			return ret;
> +				streams_to_enable, remote_sd->name, remote_pad, ret);
> +			goto err_gasket_disable;
>  		}
> +
> +		input->enabled_streams |= streams_to_enable;
>  	}
>
> -	input->enable_count++;
> +	/* Record the input and stream for this pipe. */
> +	pipe->input = sink_pad;
> +	pipe->input_stream = sink_streams;
>
>  	return 0;
> +
> +err_gasket_disable:
> +	if (!input->enabled_streams)
> +		mxc_isi_crossbar_gasket_disable(xbar, sink_pad);
> +
> +	return ret;
>  }
>
>  static int mxc_isi_crossbar_disable_streams(struct v4l2_subdev *sd,
> @@ -381,6 +394,7 @@ static int mxc_isi_crossbar_disable_streams(struct v4l2_subdev *sd,
>  					    u32 pad, u64 streams_mask)
>  {
>  	struct mxc_isi_crossbar *xbar = to_isi_crossbar(sd);
> +	struct mxc_isi_pipe *pipe = &xbar->isi->pipes[pad - xbar->num_sinks];
>  	struct v4l2_subdev *remote_sd;
>  	struct mxc_isi_input *input;
>  	u64 sink_streams;
> @@ -396,19 +410,33 @@ static int mxc_isi_crossbar_disable_streams(struct v4l2_subdev *sd,
>
>  	input = &xbar->inputs[sink_pad];
>
> -	input->enable_count--;
> +	/* Clear the input and stream for this pipe. */
> +	pipe->input = UINT_MAX;
> +	pipe->input_stream = 0;
>
> -	if (!input->enable_count) {
> -		ret = v4l2_subdev_disable_streams(remote_sd, remote_pad,
> -						  sink_streams);
> -		if (ret)
> -			dev_err(xbar->isi->dev,
> -				"failed to disable streams 0x%llx on '%s':%u: %d\n",
> -				sink_streams, remote_sd->name, remote_pad, ret);
> +	/*
> +	 * Check if any other pipe receives the same input stream. If so we
> +	 * can't disable it yet, so return immediately.
> +	 */
> +	for (unsigned int i = 0; i < xbar->isi->pdata->num_channels; ++i) {
> +		struct mxc_isi_pipe *pipe = &xbar->isi->pipes[i];
>
> -		mxc_isi_crossbar_gasket_disable(xbar, sink_pad);
> +		if (pipe->input == sink_pad &&
> +		    pipe->input_stream == sink_streams)
> +			return 0;
>  	}
>
> +	ret = v4l2_subdev_disable_streams(remote_sd, remote_pad, sink_streams);
> +	if (ret)
> +		dev_err(xbar->isi->dev,
> +			"failed to disable streams 0x%llx on '%s':%u: %d\n",
> +			sink_streams, remote_sd->name, remote_pad, ret);
> +
> +	input->enabled_streams &= ~sink_streams;
> +
> +	if (!input->enabled_streams)
> +		mxc_isi_crossbar_gasket_disable(xbar, sink_pad);
> +
>  	return ret;
>  }
>
> diff --git a/drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c b/drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c
> index 16085f23bc0b..c0ec59856374 100644
> --- a/drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c
> +++ b/drivers/media/platform/nxp/imx8-isi/imx8-isi-pipe.c
> @@ -816,6 +816,7 @@ int mxc_isi_pipe_init(struct mxc_isi_dev *isi, unsigned int id)
>  	pipe->acquired_res = 0;
>  	pipe->chained_res = 0;
>  	pipe->chained = false;
> +	pipe->input = UINT_MAX;
>
>  	sd = &pipe->sd;
>  	v4l2_subdev_init(sd, &mxc_isi_pipe_subdev_ops);
>
> --
> 2.34.1
>
>