From: Frank Li <Frank.li@oss.nxp.com>
To: hongxing.zhu@oss.nxp.com
Cc: abelvesa@kernel.org, peng.fan@nxp.com, mturquette@baylibre.com,
sboyd@kernel.org, bmasney@redhat.com, Frank.Li@nxp.com,
s.hauer@pengutronix.de, festevam@gmail.com,
kernel@pengutronix.de, linux-clk@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Richard Zhu <hongxing.zhu@nxp.com>
Subject: Re: [RESEND v1] clk: imx95-blk-ctl: Add func_out_en clock for i.MX9x PCIe
Date: Thu, 30 Jul 2026 09:46:26 -0500 [thread overview]
Message-ID: <amtjwqUPTsOaKrlK@SMW015318> (raw)
In-Reply-To: <20260730085542.263025-1-hongxing.zhu@oss.nxp.com>
On Thu, Jul 30, 2026 at 04:55:42PM +0800, hongxing.zhu@oss.nxp.com wrote:
> From: Richard Zhu <hongxing.zhu@nxp.com>
>
> Add a func_out_en clock for i.MX9x PCIe to serve as the parent gate clock
> of the CREF_EN (BIT6) gate clock. Both of these two gate clocks enable
> the output of the internal 100MHz differential reference clock.
>
> When the internal PLL clock is used as the PCIe reference clock, both
> BIT6 (CREF_EN) and BIT2 (FUNC_OUTPUT_EN) control the PCIE_REF_OUT_CLK.
>
> If these bits default to 1, the output clock is enabled. With typical
> 100-ohm termination on the board, this results in approximately 6mA of
> unnecessary power consumption when the PCIe internal PLL clock is not
> in use.
>
> To eliminate this power consumption, add a func_out_en clock gate that
> serves as the parent of the existing CREF_EN (BIT6) gate clock. Both
> gates must be enabled to output the internal 100MHz differential
> reference clock, and both will be disabled when the clock is not needed.
>
> Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
> Reviewed-by: Peng Fan <peng.fan@nxp.com>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> drivers/clk/imx/clk-imx95-blk-ctl.c | 14 ++++++++++++--
> 1 file changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-imx95-blk-ctl.c b/drivers/clk/imx/clk-imx95-blk-ctl.c
> index 56bed44719954..1f9259f456079 100644
> --- a/drivers/clk/imx/clk-imx95-blk-ctl.c
> +++ b/drivers/clk/imx/clk-imx95-blk-ctl.c
> @@ -286,18 +286,28 @@ static const struct imx95_blk_ctl_dev_data netcmix_dev_data = {
> static const struct imx95_blk_ctl_clk_dev_data hsio_blk_ctl_clk_dev_data[] = {
> [0] = {
> .name = "hsio_blk_ctl_clk",
> - .parent_names = (const char *[]){ "hsio_pll", },
> + .parent_names = (const char *[]){ "func_out_en", },
> .num_parents = 1,
> .reg = 0,
> .bit_idx = 6,
> .bit_width = 1,
> .type = CLK_GATE,
> .flags = CLK_SET_RATE_PARENT,
> + },
> + [1] = {
> + .name = "func_out_en",
> + .parent_names = (const char *[]){ "hsio_pll", },
> + .num_parents = 1,
> + .reg = 0,
> + .bit_idx = 2,
> + .bit_width = 1,
> + .type = CLK_GATE,
> + .flags = CLK_SET_RATE_PARENT,
> }
> };
>
> static const struct imx95_blk_ctl_dev_data hsio_blk_ctl_dev_data = {
> - .num_clks = 1,
> + .num_clks = ARRAY_SIZE(hsio_blk_ctl_clk_dev_data),
> .clk_dev_data = hsio_blk_ctl_clk_dev_data,
> .clk_reg_offset = 0,
> };
> --
> 2.34.1
>
>
next prev parent reply other threads:[~2026-07-30 14:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-30 8:55 [RESEND v1] clk: imx95-blk-ctl: Add func_out_en clock for i.MX9x PCIe hongxing.zhu
2026-07-30 14:46 ` Frank Li [this message]
2026-07-30 15:11 ` Abel Vesa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=amtjwqUPTsOaKrlK@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=abelvesa@kernel.org \
--cc=bmasney@redhat.com \
--cc=festevam@gmail.com \
--cc=hongxing.zhu@nxp.com \
--cc=hongxing.zhu@oss.nxp.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=peng.fan@nxp.com \
--cc=s.hauer@pengutronix.de \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox