From: Frank Li <Frank.li@oss.nxp.com>
To: Rosen Penev <rosenp@gmail.com>
Cc: dmaengine@vger.kernel.org,
Ludovic Desroches <ludovic.desroches@microchip.com>,
Vinod Koul <vkoul@kernel.org>, Frank Li <Frank.Li@kernel.org>,
"moderated list:MICROCHIP AT91 DMA DRIVERS"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCHv2] dmaengine: at_hdmac: use more devm in _probe
Date: Fri, 14 Aug 2026 17:08:50 -0400 [thread overview]
Message-ID: <an-D4k84MUptmfkF@lizhi-Precision-Tower-5810> (raw)
In-Reply-To: <20260724225720.43410-1-rosenp@gmail.com>
On Fri, Jul 24, 2026 at 03:57:20PM -0700, Rosen Penev wrote:
> As devm is already used in _probe, complete the conversion so that
> everything unwinds in proper order.
>
Thank for. suggest commit message
dmaengine: at_hdmac: use devm APIs in probe()
Convert resource allocation and setup in probe() to use devm-managed APIs.
Simplify the error handling path and removes explicit cleanup code.
Frank
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>
> ---
> v2: remove list_del
> drivers/dma/at_hdmac.c | 50 ++++++++++--------------------------------
> 1 file changed, 11 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
> index e5b30a57c477..f16cf29ca548 100644
> --- a/drivers/dma/at_hdmac.c
> +++ b/drivers/dma/at_hdmac.c
> @@ -1980,40 +1980,34 @@ static int __init at_dma_probe(struct platform_device *pdev)
> atdma->dma_device.cap_mask = plat_dat->cap_mask;
> atdma->all_chan_mask = (1 << plat_dat->nr_channels) - 1;
>
> - atdma->clk = devm_clk_get(&pdev->dev, "dma_clk");
> + atdma->clk = devm_clk_get_enabled(&pdev->dev, "dma_clk");
> if (IS_ERR(atdma->clk))
> return PTR_ERR(atdma->clk);
>
> - err = clk_prepare_enable(atdma->clk);
> - if (err)
> - return err;
> -
> /* force dma off, just in case */
> at_dma_off(atdma);
>
> - err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
> + err = devm_request_irq(&pdev->dev, irq, at_dma_interrupt, 0, "at_hdmac", atdma);
> if (err)
> - goto err_irq;
> + return err;
>
> platform_set_drvdata(pdev, atdma);
>
> /* create a pool of consistent memory blocks for hardware descriptors */
> - atdma->lli_pool = dma_pool_create("at_hdmac_lli_pool",
> + atdma->lli_pool = dmam_pool_create("at_hdmac_lli_pool",
> &pdev->dev, sizeof(struct at_lli),
> 4 /* word alignment */, 0);
> if (!atdma->lli_pool) {
> dev_err(&pdev->dev, "Unable to allocate DMA LLI descriptor pool\n");
> - err = -ENOMEM;
> - goto err_desc_pool_create;
> + return -ENOMEM;
> }
>
> /* create a pool of consistent memory blocks for memset blocks */
> - atdma->memset_pool = dma_pool_create("at_hdmac_memset_pool",
> + atdma->memset_pool = dmam_pool_create("at_hdmac_memset_pool",
> &pdev->dev, sizeof(int), 4, 0);
> if (!atdma->memset_pool) {
> dev_err(&pdev->dev, "No memory for memset dma pool\n");
> - err = -ENOMEM;
> - goto err_memset_pool_create;
> + return -ENOMEM;
> }
>
> /* clear any pending interrupt */
> @@ -2080,10 +2074,10 @@ static int __init at_dma_probe(struct platform_device *pdev)
> dma_has_cap(DMA_SLAVE, atdma->dma_device.cap_mask) ? "slave " : "",
> plat_dat->nr_channels);
>
> - err = dma_async_device_register(&atdma->dma_device);
> + err = dmaenginem_async_device_register(&atdma->dma_device);
> if (err) {
> dev_err(&pdev->dev, "Unable to register: %d.\n", err);
> - goto err_dma_async_device_register;
> + return err;
> }
>
> /*
> @@ -2092,27 +2086,15 @@ static int __init at_dma_probe(struct platform_device *pdev)
> * dma_request_channel().
> */
> if (pdev->dev.of_node) {
> - err = of_dma_controller_register(pdev->dev.of_node,
> + err = devm_of_dma_controller_register(&pdev->dev, pdev->dev.of_node,
> at_dma_xlate, atdma);
> if (err) {
> dev_err(&pdev->dev, "could not register of_dma_controller\n");
> - goto err_of_dma_controller_register;
> + return err;
> }
> }
>
> return 0;
> -
> -err_of_dma_controller_register:
> - dma_async_device_unregister(&atdma->dma_device);
> -err_dma_async_device_register:
> - dma_pool_destroy(atdma->memset_pool);
> -err_memset_pool_create:
> - dma_pool_destroy(atdma->lli_pool);
> -err_desc_pool_create:
> - free_irq(platform_get_irq(pdev, 0), atdma);
> -err_irq:
> - clk_disable_unprepare(atdma->clk);
> - return err;
> }
>
> static void at_dma_remove(struct platform_device *pdev)
> @@ -2121,22 +2103,12 @@ static void at_dma_remove(struct platform_device *pdev)
> struct dma_chan *chan, *_chan;
>
> at_dma_off(atdma);
> - if (pdev->dev.of_node)
> - of_dma_controller_free(pdev->dev.of_node);
> - dma_async_device_unregister(&atdma->dma_device);
> -
> - dma_pool_destroy(atdma->memset_pool);
> - dma_pool_destroy(atdma->lli_pool);
> - free_irq(platform_get_irq(pdev, 0), atdma);
>
> list_for_each_entry_safe(chan, _chan, &atdma->dma_device.channels,
> device_node) {
> /* Disable interrupts */
> atc_disable_chan_irq(atdma, chan->chan_id);
> - list_del(&chan->device_node);
> }
> -
> - clk_disable_unprepare(atdma->clk);
> }
>
> static void at_dma_shutdown(struct platform_device *pdev)
> --
> 2.55.0
>
prev parent reply other threads:[~2026-08-14 21:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-24 22:57 [PATCHv2] dmaengine: at_hdmac: use more devm in _probe Rosen Penev
2026-08-14 21:08 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=an-D4k84MUptmfkF@lizhi-Precision-Tower-5810 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ludovic.desroches@microchip.com \
--cc=rosenp@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox