Re: [PATCH 0/2] phy: Make sure clk_init_data is fully initialized

[Brian Masney <bmasney@redhat.com>]

On Fri, Aug 21, 2026 at 12:08:38PM +0200, Geert Uytterhoeven wrote:
> 	Hi all,
> 
> The clk_init_data structure contains several mutually-exclusive members
> for different methods to specify the possible parents of a clock,
> prompting drivers to initialize only the members they need.  However,
> not initializing all members may cause subtle issues, which are only
> exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
> enabled.
> 
> Hence this series aims to make sure all members are fully initialized,
> to avoid such bugs, and to prevent future breakage when converting
> drivers to a different method for specifying the parents.
> 
> Part One[1] fixed all cases that I identified to be real bugs, in
> response to a crash I saw on BeagleBone Black.
> 
> This series is the PHY subpart of Part Two, which fixes remaining cases
> that are currently harmless.  These are still fragile, and may cause
> future breakage when converting drivers to a different method for
> specifying the parents.
> 
> Thanks for your comments!
> 
> [1] "[PATCH treewide 0/5] clk: Make sure clk_init_data is fully
>      initialized (part 1)"
>     https://lore.kernel.org/cover.1787165329.git.geert+renesas@glider.be

For the series:

Reviewed-by: Brian Masney <bmasney@redhat.com>