Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Bianconi <lorenzo@kernel.org>
To: Chris Scott <gilroyscott1970@gmail.com>
Cc: netdev@vger.kernel.org, andrew+netdev@lunn.ch,
	davem@davemloft.net, edumazet@kernel.org, kuba@kernel.org,
	pabeni@redhat.com, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, matthias.bgg@gmail.com,
	angelogioacchino.delregno@collabora.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-mediatek@lists.infradead.org, pawlik.dan@gmail.com,
	zhengping.zhang@airoha.com
Subject: Re: [RFC net-next 3/3] net: airoha: npu: use coherent memory for mailbox messages
Date: Mon, 26 Oct 2026 08:50:56 +0100	[thread overview]
Message-ID: <at8GYPdqto4xoHBl@lore-desk> (raw)
In-Reply-To: <20261024154150.45733-4-gilroyscott1970@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 6773 bytes --]

> From: Daniel Pawlik <pawlik.dan@gmail.com>
> 
> airoha_npu_send_msg() maps the caller's kzalloc() buffer with
> DMA_BIDIRECTIONAL. These buffers are small and not cacheline aligned,
> so on arm64 the mapping bounces through swiotlb. On a 2 GiB EN7581
> board the default swiotlb pool sits above 0xc0000000 (0xff6cf000 on
> W1700K), outside the 0x80000000-0xbfffffff window the NPU can address;
> higher addresses alias the lower 1 GiB. On W1700K + MT7996 this makes
> WLAN_FUNC_GET_WAIT_NPU_VERSION read back 0.0 and mt76 does not bind
> NPU offload.
> 
> Allocate one coherent buffer per NPU core at probe and reuse it under
> the per-core mailbox lock. With the previous patch it comes from the
> NPU DMA pool, inside the window. airoha_npu_send_msg() is also called
> from PPE foe_commit under spin_lock_bh(), which rules out a per-message
> GFP_ATOMIC coherent allocation.
> 
> Add __airoha_npu_send_msg() with an optional reply buffer so GET
> callers copy only the trailing response payload; airoha_npu_send_msg()
> keeps copying the whole buffer back, like the bidirectional mapping.
> 
> The original version of this patch was written with Cursor (composer-2);
> it was rebased onto net-next and its commit message rewritten with
> Claude (Anthropic).
> 
> Link: https://lore.kernel.org/r/20260809152813.585797-1-pawlik.dan@gmail.com
> Link: https://lore.kernel.org/r/atCRsquzA1UxSpCc@mediatek.com
> Signed-off-by: Daniel Pawlik <pawlik.dan@gmail.com>
> Signed-off-by: Chris Scott <gilroyscott1970@gmail.com>
> ---
>  drivers/net/ethernet/airoha/airoha_npu.c  | 65 +++++++++++++++++------
>  include/linux/soc/airoha/airoha_offload.h |  3 ++
>  2 files changed, 51 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/net/ethernet/airoha/airoha_npu.c b/drivers/net/ethernet/airoha/airoha_npu.c
> index 069fd60680..3d1aa63dd5 100644
> --- a/drivers/net/ethernet/airoha/airoha_npu.c
> +++ b/drivers/net/ethernet/airoha/airoha_npu.c
> @@ -24,6 +24,12 @@
>  #define NPU_EN7581_FIRMWARE_RV32_MAX_SIZE	0x200000
>  #define NPU_EN7581_FIRMWARE_DATA_MAX_SIZE	0x10000
>  #define NPU_DUMP_SIZE				512
> +/*
> + * Mailbox DMA payload size. Covers sizeof(struct ppe_mbox_data) (28) and
> + * WLAN TLV messages (header + payload); largest in-tree WLAN payload today
> + * is 16 bytes (INODE_TXRX_REG_ADDR). Keep headroom for future commands.
> + */
> +#define AIROHA_NPU_MBOX_SIZE			256
>  
>  #define REG_NPU_LOCAL_SRAM		0x0
>  
> @@ -161,23 +167,32 @@ struct wlan_mbox_data {
>  	DECLARE_FLEX_ARRAY(u8, d);
>  };
>  
> -static int airoha_npu_send_msg(struct airoha_npu *npu, int func_id,
> -			       void *p, int size)
> +static int __airoha_npu_send_msg(struct airoha_npu *npu, int func_id,
> +				 const void *data, int len, void *reply,
> +				 u16 reply_len)
>  {
> -	u16 core = 0; /* FIXME */
> -	u32 val, offset = core << 4;
> -	dma_addr_t dma_addr;
> +	struct airoha_npu_core *core = &npu->cores[0]; /* FIXME: core */
> +	u32 val, offset = 0;
>  	int ret;
>  
> -	dma_addr = dma_map_single(npu->dev, p, size, DMA_BIDIRECTIONAL);
> -	ret = dma_mapping_error(npu->dev, dma_addr);
> -	if (ret)
> -		return ret;
> +	if (len > AIROHA_NPU_MBOX_SIZE)
> +		return -EINVAL;
> +
> +	if (reply && reply_len > len)
> +		return -EINVAL;
> +
> +	/*
> +	 * The NPU only reaches DRAM at 0x80000000-0xbfffffff; a streaming
> +	 * mapping of the caller buffer may bounce through swiotlb outside
> +	 * that window. Use the probe-time coherent buffer, which comes from
> +	 * the NPU DMA pool when one is declared.
> +	 */
> +	spin_lock_bh(&core->lock);
>  
> -	spin_lock_bh(&npu->cores[core].lock);
> +	memcpy(core->buf, data, len);
>  
> -	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(0) + offset, dma_addr);
> -	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(1) + offset, size);
> +	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(0) + offset, core->addr);
> +	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(1) + offset, len);
>  	regmap_read(npu->regmap, REG_CR_MBQ0_CTRL(2) + offset, &val);
>  	regmap_write(npu->regmap, REG_CR_MBQ0_CTRL(2) + offset, val + 1);
>  	val = FIELD_PREP(MBOX_MSG_FUNC_ID, func_id) | MBOX_MSG_WAIT_RSP;
> @@ -190,13 +205,21 @@ static int airoha_npu_send_msg(struct airoha_npu *npu, int func_id,
>  	if (!ret && FIELD_GET(MBOX_MSG_STATUS, val) != NPU_MBOX_SUCCESS)
>  		ret = -EINVAL;
>  
> -	spin_unlock_bh(&npu->cores[core].lock);
> +	/* Copy the trailing reply_len bytes of the response. */
> +	if (!ret && reply)
> +		memcpy(reply, core->buf + len - reply_len, reply_len);
>  
> -	dma_unmap_single(npu->dev, dma_addr, size, DMA_BIDIRECTIONAL);
> +	spin_unlock_bh(&core->lock);
>  
>  	return ret;
>  }
>  
> +static int airoha_npu_send_msg(struct airoha_npu *npu, int func_id,
> +			       void *data, int len)
> +{
> +	return __airoha_npu_send_msg(npu, func_id, data, len, data, len);

IIUC airoha_npu_send_msg() is used when we do not expect any reply, correct? In
this case we should have:

	return __airoha_npu_send_msg(npu, func_id, data, len, NULL, len);

Am I missing something?

Regards,
Lorenzo

> +}
> +
>  static int airoha_npu_load_firmware(struct device *dev, void __iomem *addr,
>  				    const char *fw_name, int fw_max_size)
>  {
> @@ -500,9 +523,8 @@ static int airoha_npu_wlan_msg_get(struct airoha_npu *npu, int ifindex,
>  	wlan_data->func_type = NPU_OP_GET;
>  	wlan_data->func_id = func_id;
>  
> -	err = airoha_npu_send_msg(npu, NPU_FUNC_WIFI, wlan_data, len);
> -	if (!err)
> -		memcpy(data, wlan_data->d, data_len);
> +	err = __airoha_npu_send_msg(npu, NPU_FUNC_WIFI, wlan_data, len,
> +				    data, data_len);
>  	kfree(wlan_data);
>  
>  	return err;
> @@ -794,6 +816,15 @@ static int airoha_npu_probe(struct platform_device *pdev)
>  			return err;
>  	}
>  
> +	for (i = 0; i < ARRAY_SIZE(npu->cores); i++) {
> +		struct airoha_npu_core *core = &npu->cores[i];
> +
> +		core->buf = dmam_alloc_coherent(dev, AIROHA_NPU_MBOX_SIZE,
> +						&core->addr, GFP_KERNEL);
> +		if (!core->buf)
> +			return -ENOMEM;
> +	}
> +
>  	err = airoha_npu_run_firmware(dev, base, &res);
>  	if (err)
>  		return err;
> diff --git a/include/linux/soc/airoha/airoha_offload.h b/include/linux/soc/airoha/airoha_offload.h
> index 7589fccfee..16a988ad74 100644
> --- a/include/linux/soc/airoha/airoha_offload.h
> +++ b/include/linux/soc/airoha/airoha_offload.h
> @@ -173,6 +173,9 @@ struct airoha_npu {
>  		/* protect concurrent npu memory accesses */
>  		spinlock_t lock;
>  		struct work_struct wdt_work;
> +		/* Coherent bounce buffer for mailbox cmd/rsp */
> +		void *buf;
> +		dma_addr_t addr;
>  	} cores[NPU_NUM_CORES];
>  
>  	int irqs[NPU_NUM_IRQ];
> -- 
> 2.53.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

      reply	other threads:[~2026-10-26  7:51 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-24 15:41 [RFC net-next 0/3] net: airoha: npu: keep NPU-shared DMA buffers in the NPU window Chris Scott
2026-10-24 15:41 ` [RFC net-next 1/3] dt-bindings: net: airoha: npu: add DMA pool memory region Chris Scott
2026-10-24 15:41 ` [RFC net-next 2/3] net: airoha: npu: attach a coherent pool in the NPU window Chris Scott
2026-10-26  7:48   ` Lorenzo Bianconi
2026-10-27  5:10     ` Chris Scott
2026-10-24 15:41 ` [RFC net-next 3/3] net: airoha: npu: use coherent memory for mailbox messages Chris Scott
2026-10-26  7:50   ` Lorenzo Bianconi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=at8GYPdqto4xoHBl@lore-desk \
    --to=lorenzo@kernel.org \
    --cc=andrew+netdev@lunn.ch \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@kernel.org \
    --cc=gilroyscott1970@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pawlik.dan@gmail.com \
    --cc=robh@kernel.org \
    --cc=zhengping.zhang@airoha.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox