Re: [PATCH 1/6] arm64: dts: qcom: talos-lyra-evk: Add LT9611UXD HDMI bridge support

[Anand Tiwari <anand.tiwari@oss.qualcomm.com>]

On Thu, Oct 22, 2026 at 10:04:58AM +0200, Konrad Dybcio wrote:
> On 10/21/26 5:17 PM, anand.tiwari@oss.qualcomm.com wrote:
> > From: Mohit Dsor <mohit.dsor@oss.qualcomm.com>
> > 
> > Add support for the Lontium LT9611UXD DSI-to-HDMI bridge, enabled by
> > default on the Talos Lyra EVK base board DT, to provide HDMI output
> > on the DSI0_B2B connector on the carrier card.
> 
> [...]
> 
> > +	vreg_disp_3p3: regulator-disp-3p3 {
> > +		compatible = "regulator-fixed";
> > +		regulator-name = "vreg_disp_3p3";
> > +		regulator-min-microvolt = <3300000>;
> > +		regulator-max-microvolt = <3300000>;
> > +		gpio = <&tlmm 3 GPIO_ACTIVE_HIGH>;
> > +		enable-active-high;
> > +		pinctrl-0 = <&lcd_bias_en>;
> > +		pinctrl-names = "default";
> > +	};
> > +
> > +};
> 
> Stray \n above

we will handle this
 
> Otherwise looks good
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> 
> Konrad