Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
To: Liu Ying <victor.liu@nxp.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>,
	 Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Maxime Ripard <mripard@kernel.org>,
	 Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>,
	 Simona Vetter <simona@ffwll.ch>, Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	 Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	 Pengutronix Kernel Team <kernel@pengutronix.de>,
	Fabio Estevam <festevam@gmail.com>,
	 Dmitry Baryshkov <lumag@kernel.org>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	 imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
	 linux-kernel@vger.kernel.org,
	Marek Vasut <marek.vasut@mailbox.org>,
	 Alexander Stein <alexander.stein@ew.tq-group.com>,
	Frank Li <Frank.Li@nxp.com>
Subject: Re: [PATCH v8 06/15] drm/imx: dc-crtc: Disable at boot
Date: Mon, 2 Nov 2026 09:51:32 +0200	[thread overview]
Message-ID: <auhAyqHZSFD0MsUQ@vm> (raw)
In-Reply-To: <aufxSha2jzQJxjWu@raspi>

On Mon, Nov 02, 2026 at 10:11:22AM +0800, Liu Ying wrote:
> On Fri, Oct 30, 2026 at 03:05:14PM +0200, Laurentiu Palcu wrote:
> > On Fri, Oct 30, 2026 at 05:54:30PM +0800, Liu Ying wrote:
> > > CRTC(s) could still be running after the DRM device is unplugged by
> > > calling drm_dev_unplug(), because the CRTC disablement logic is
> > > protected and bypassed by the drm_dev_enter()/drm_dev_exit() pair.
> > > Hence, Pixel Engine's AXI clock use count(managed by Pixel Engine
> > > driver's runtime PM) and pixel clock use count could be inbalanced
> > > after removing and re-installing the driver module.  To fix this,
> > > add a helper dc_crtc_disable_at_boot() and call it to properly
> > > disable all CRTCs before advertising DRM device to user-space by
> > > calling drm_dev_register().
> > > 
> > > Fixes: 711a3b878366 ("drm/imx: Add i.MX8qxp Display Controller KMS")
> > > Reviewed-by: Frank Li <Frank.Li@nxp.com>
> > > Signed-off-by: Liu Ying <victor.liu@nxp.com>
> > > ---
> > > v8:
> > > - Call dc_drv_set_crtc_disable() in dc_crtc_disable_at_boot() after CRTC
> > >   is disabled.  (Sashiko AI bot)
> > > - Make dc_crtc_disable_at_boot() return an integer instead of void.
> > >   (Laurentiu)
> > > - Postpone Pixel Engine AXI clock disablement at boot to the time point
> > >   where CRTC1(with index == 1) is being disabled at boot.
> > > 
> > > v7:
> > > - Check CRTC status to ensure that clocks were enabled by a previous boot
> > >   before disabling them in dc_crtc_disable_at_boot().  (Sashiko AI bot)
> > > - Modify debug message in dc_crtc_disable_at_boot().
> > > 
> > > v6:
> > > - Rebase onto the latest drm-misc-next and resolve conflicts.
> > > 
> > > v3:
> > > - Collect Frank's R-b tag.
> > > ---
> > >  drivers/gpu/drm/imx/dc/dc-crtc.c | 72 ++++++++++++++++++++++++++++++++++------
> > >  drivers/gpu/drm/imx/dc/dc-drv.c  | 11 ++++++
> > >  drivers/gpu/drm/imx/dc/dc-drv.h  |  3 ++
> > >  3 files changed, 76 insertions(+), 10 deletions(-)
> > > 
> > > diff --git a/drivers/gpu/drm/imx/dc/dc-crtc.c b/drivers/gpu/drm/imx/dc/dc-crtc.c
> > > index 0d64186a9901..5bc952d6883e 100644
> > > --- a/drivers/gpu/drm/imx/dc/dc-crtc.c
> > > +++ b/drivers/gpu/drm/imx/dc/dc-crtc.c
> > > @@ -227,6 +227,7 @@ dc_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_commit *state)
> > >  	struct drm_crtc_state *new_crtc_state =
> > >  				drm_atomic_get_new_crtc_state(state, crtc);
> > >  	struct drm_display_mode *adj = &new_crtc_state->adjusted_mode;
> > > +	struct dc_drm_device *dc_drm = to_dc_drm_device(crtc->dev);
> > >  	struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> > >  	enum dc_link_id cf_link;
> > >  	int idx, ret;
> > > @@ -287,29 +288,37 @@ dc_crtc_atomic_enable(struct drm_crtc *crtc, struct drm_atomic_commit *state)
> > >  
> > >  	DC_CRTC_CHECK_FRAMEGEN_FIFO(dc_crtc->fg);
> > >  
> > > +	dc_drv_set_crtc_enable(dc_drm, drm_crtc_index(crtc));
> > > +
> > >  	drm_dev_exit(idx);
> > >  
> > >  out:
> > >  	dc_crtc_queue_state_event(new_crtc_state);
> > >  }
> > >  
> > > -static void
> > > -dc_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_commit *state)
> > > +static inline void __dc_crtc_disable_fg(struct drm_crtc *crtc)
> > >  {
> > > -	struct drm_crtc_state *new_crtc_state =
> > > -				drm_atomic_get_new_crtc_state(state, crtc);
> > > -	struct dc_drm_device *dc_drm = to_dc_drm_device(crtc->dev);
> > >  	struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> > > -	int idx;
> > > -
> > > -	if (!drm_dev_enter(crtc->dev, &idx))
> > > -		goto out;
> > >  
> > >  	enable_irq(dc_crtc->irq_dec_seqcomplete);
> > >  	dc_fg_disable(dc_crtc->fg);
> > >  	DC_CRTC_WAIT_FOR_COMPLETION_TIMEOUT(dec_seqcomplete_done);
> > >  	disable_irq(dc_crtc->irq_dec_seqcomplete);
> > > +}
> > >  
> > > +static void
> > > +dc_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_commit *state)
> > > +{
> > > +	struct drm_crtc_state *new_crtc_state =
> > > +				drm_atomic_get_new_crtc_state(state, crtc);
> > > +	struct dc_drm_device *dc_drm = to_dc_drm_device(crtc->dev);
> > > +	struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> > > +	int idx;
> > > +
> > > +	if (!drm_dev_enter(crtc->dev, &idx))
> > > +		goto out;
> > > +
> > > +	__dc_crtc_disable_fg(crtc);
> > >  	dc_fg_disable_clock(dc_crtc->fg);
> > >  
> > >  	/* request pixel engine power-off as plane is off too */
> > > @@ -318,8 +327,9 @@ dc_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_commit *state)
> > >  	/* request display engine power-off when CRTC is disabled */
> > >  	pm_runtime_put(dc_crtc->de->dev);
> > >  
> > > -	drm_dev_exit(idx);
> > > +	dc_drv_set_crtc_disable(dc_drm, drm_crtc_index(crtc));
> > >  
> > > +	drm_dev_exit(idx);
> > >  out:
> > >  	drm_crtc_vblank_off(crtc);
> > >  
> > > @@ -331,6 +341,48 @@ dc_crtc_atomic_disable(struct drm_crtc *crtc, struct drm_atomic_commit *state)
> > >  	spin_unlock_irq(&crtc->dev->event_lock);
> > >  }
> > >  
> > > +int dc_crtc_disable_at_boot(struct drm_crtc *crtc)
> > > +{
> > > +	struct dc_drm_device *dc_drm = to_dc_drm_device(crtc->dev);
> > > +	struct dc_crtc *dc_crtc = to_dc_crtc(crtc);
> > > +	int ret;
> > > +
> > > +	ret = pm_runtime_resume_and_get(dc_crtc->de->dev);
> > > +	if (ret < 0) {
> > > +		dc_crtc_err(crtc, "failed to get DC display engine RPM: %d\n",
> > > +			    ret);
> > > +		goto out1;
> > > +	}
> > > +
> > > +	if (!dc_fg_wait_for_frame_index_moving(dc_crtc->fg)) {
> > > +		dc_crtc_dbg(crtc, "FrameGen frame index isn't moving\n");
> > 
> > Shouldn't you set 'ret' to something here? Otherwise you'd return the previous
> > ret value, which would be 0.
> 
> We take FrameGen frame index not moving as a normal case, which means
> the CRTC was not enabled before this boot, so returning 0 is fine.

Ok

Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>

-- 
Thanks,
Laurentiu


  reply	other threads:[~2026-11-02  7:52 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-30  9:54 [PATCH v8 00/15] drm/imx: dc: Use prefetch engine Liu Ying
2026-10-30  9:54 ` [PATCH v8 01/15] dt-bindings: display: imx: Add i.MX8qxp/qm PRG binding Liu Ying
2026-10-30  9:54 ` [PATCH v8 02/15] dt-bindings: display: imx: Add i.MX8qxp/qm DPR channel binding Liu Ying
2026-10-30  9:54 ` [PATCH v8 03/15] drm/imx: dc-plane: Disable plane when it is invisible Liu Ying
2026-10-30  9:54 ` [PATCH v8 04/15] drm/imx: dc-fu: Fix dimensions Liu Ying
2026-10-30  9:54 ` [PATCH v8 05/15] drm/imx: dc: Flag CRTC status in GERNERALPURPOSE register Liu Ying
2026-10-30  9:54 ` [PATCH v8 06/15] drm/imx: dc-crtc: Disable at boot Liu Ying
2026-10-30 13:05   ` Laurentiu Palcu
2026-11-02  2:11     ` Liu Ying
2026-11-02  7:51       ` Laurentiu Palcu [this message]
2026-10-30  9:54 ` [PATCH v8 07/15] drm/imx: dc: Add PRG support Liu Ying
2026-10-30 13:05   ` Laurentiu Palcu
2026-10-30  9:54 ` [PATCH v8 08/15] drm/imx: dc: Add DPR channel support Liu Ying
2026-10-30 13:06   ` Laurentiu Palcu
2026-10-30  9:54 ` [PATCH v8 09/15] drm/imx: dc: Use TCON operation mode Liu Ying
2026-10-30  9:54 ` [PATCH v8 10/15] drm/imx: dc-ed: Support getting source selection Liu Ying
2026-10-30  9:54 ` [PATCH v8 11/15] drm/imx: dc-lb: Support getting secondary input selection Liu Ying
2026-10-30  9:54 ` [PATCH v8 12/15] drm/imx: dc-ed: Drop initial source selection Liu Ying
2026-10-30  9:54 ` [PATCH v8 13/15] drm/imx: dc-lb: Drop initial primary and secondary input selections Liu Ying
2026-10-30  9:54 ` [PATCH v8 14/15] drm/imx: dc-fu: Get DPR channel Liu Ying
2026-10-30  9:54 ` [PATCH v8 15/15] drm/imx: dc: Use prefetch engine Liu Ying

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=auhAyqHZSFD0MsUQ@vm \
    --to=laurentiu.palcu@oss.nxp.com \
    --cc=Frank.Li@nxp.com \
    --cc=airlied@gmail.com \
    --cc=alexander.stein@ew.tq-group.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=festevam@gmail.com \
    --cc=imx@lists.linux.dev \
    --cc=kernel@pengutronix.de \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lumag@kernel.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=marek.vasut@mailbox.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=simona@ffwll.ch \
    --cc=tzimmermann@suse.de \
    --cc=victor.liu@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox