Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Lorenzo Pieralisi <lpieralisi@kernel.org>
To: Sascha Bischoff <sascha.bischoff@arm.com>
Cc: Marc Zyngier <maz@kernel.org>, Thomas Gleixner <tglx@kernel.org>,
	Radu Rendec <radu@rendec.net>,
	Timothy Hayes <timothy.hayes@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Jonathan Cameron <jic23@kernel.org>,
	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Sashiko AI <sashiko-bot@kernel.org>
Subject: Re: [PATCH 00/10] irqchip/gic-v5: Fix misc IRS and ITS host driver issues
Date: Tue, 3 Nov 2026 15:59:05 +0100	[thread overview]
Message-ID: <aun2udtwaIo2RiRC@red-moon> (raw)
In-Reply-To: <20261102-host_gicv5_fixes-v1-0-743b61626fc5@arm.com>

On Mon, Nov 02, 2026 at 01:32:53PM +0000, Sascha Bischoff wrote:
> This series fixes issues in the GICv5 host IRS and ITS drivers.
> 
> The ITS invalidation serialisation fix addresses Sashiko's report of a
> race between event and device invalidation commands [1]. The other
> patches correct IRS allocation and routing behaviour, serialise IRS
> synchronisation, and fix ITS L1/L2 table selection, cache maintenance,
> ACPI coherency handling, and resource cleanup.
> 
> The IRS changes:
> * Reject allocation of an SPI without an IRS, preventing a null-pointer
>   dereference, and warn about low-quality firmware.
> * Only program IRS_PE_CR0.DPS when 1-of-N routing is supported as this field
>   is RES0, otherwise.
> * Serialise IRS synchronisation requests, as the IRS ignores a request while
>   an earlier one is still active.
> 
> The ITS changes:
> * Serialise event and device cache invalidations because both use the ITS's
>   shared DIDR register, so concurrent writes are a bad idea!
> * Select linear device and interrupt translation tables when one L2
>   table covers the full ID space. Currently, this selects the wrong
>   path, then the L1 table code rejects the attempt to create the
>   table.
> * Check the ACPI noncoherent flag with ACPI, rather than checking the
>   DT's property.
> * Correct cache-maintenance sizing after limiting the DeviceID width.
> * Invalidate the device cache before freeing an ITT.
> * Use firmware-node names in initialisation warnings.
> * Release the reserved MMIO region if DT-based ITS initialisation fails.
> 
> I've CC'd stable for the IRS/ITS locking fixes, the ITS table alloc
> issue, and the ACPI coherency fix, as these are the most important
> changes to backport.
> 
> The series is based on v7.4-rc1. Thanks for taking a look!

Thank you for fixing these bugs Sascha.

Lorenzo

> 
> Sascha
> 
> [1] https://sashiko.dev/#/patchset/20261016155741.979985-1-sascha.bischoff@arm.com?part=11
> 
> Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
> ---
> Sascha Bischoff (10):
>       irqchip/gic-v5: Reject SPIs not backed by an IRS
>       irqchip/gic-v5: Only set IRS DPS when 1ofN routing is supported
>       irqchip/gic-v5: Serialise IRS synchronisation requests
>       irqchip/gic-v5: Serialise ITS invalidation commands
>       irqchip/gic-v5: Use linear DT and ITT when L2 covers all IDs
>       irqchip/gic-v5: Honour ACPI ITS noncoherent flag
>       irqchip/gic-v5: Use firmware node name in ITS warning
>       irqchip/gic-v5: Invalidate ITS device cache before freeing ITT
>       irqchip/gic-v5: Clean the allocated linear device table size
>       irqchip/gic-v5: Release ITS MMIO region on DT probe failure
> 
>  drivers/irqchip/irq-gic-v5-irs.c   | 22 +++++++++++++++-------
>  drivers/irqchip/irq-gic-v5-its.c   | 29 ++++++++++++++++++++++++-----
>  drivers/irqchip/irq-gic-v5.c       |  9 +++++++++
>  include/linux/irqchip/arm-gic-v5.h |  1 +
>  4 files changed, 49 insertions(+), 12 deletions(-)
> ---
> base-commit: 6628e7d4c6b25c8d18f1345e3a20d21829aae7e4
> change-id: 20261102-host_gicv5_fixes-1eeea29d2ea4
> 
> Best regards,
> --  
> Sascha Bischoff <sascha.bischoff@arm.com>
> 


      parent reply	other threads:[~2026-11-03 14:59 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-02 13:32 [PATCH 00/10] irqchip/gic-v5: Fix misc IRS and ITS host driver issues Sascha Bischoff
2026-11-02 13:32 ` [PATCH 01/10] irqchip/gic-v5: Reject SPIs not backed by an IRS Sascha Bischoff
2026-11-02 13:50   ` Lorenzo Pieralisi
2026-11-02 13:32 ` [PATCH 02/10] irqchip/gic-v5: Only set IRS DPS when 1ofN routing is supported Sascha Bischoff
2026-11-02 14:00   ` Lorenzo Pieralisi
2026-11-02 13:32 ` [PATCH 03/10] irqchip/gic-v5: Serialise IRS synchronisation requests Sascha Bischoff
2026-11-03  9:12   ` Lorenzo Pieralisi
2026-11-02 13:32 ` [PATCH 04/10] irqchip/gic-v5: Serialise ITS invalidation commands Sascha Bischoff
2026-11-02 15:56   ` Lorenzo Pieralisi
2026-11-02 13:32 ` [PATCH 05/10] irqchip/gic-v5: Use linear DT and ITT when L2 covers all IDs Sascha Bischoff
2026-11-03 14:58   ` Lorenzo Pieralisi
2026-11-02 13:32 ` [PATCH 06/10] irqchip/gic-v5: Honour ACPI ITS noncoherent flag Sascha Bischoff
2026-11-02 14:13   ` Lorenzo Pieralisi
2026-11-02 13:33 ` [PATCH 07/10] irqchip/gic-v5: Use firmware node name in ITS warning Sascha Bischoff
2026-11-02 14:21   ` Lorenzo Pieralisi
2026-11-02 13:33 ` [PATCH 08/10] irqchip/gic-v5: Invalidate ITS device cache before freeing ITT Sascha Bischoff
2026-11-02 15:22   ` Lorenzo Pieralisi
2026-11-02 13:33 ` [PATCH 09/10] irqchip/gic-v5: Clean the allocated linear device table size Sascha Bischoff
2026-11-02 14:46   ` Lorenzo Pieralisi
2026-11-02 13:33 ` [PATCH 10/10] irqchip/gic-v5: Release ITS MMIO region on DT probe failure Sascha Bischoff
2026-11-02 14:54   ` Lorenzo Pieralisi
2026-11-03 14:59 ` Lorenzo Pieralisi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aun2udtwaIo2RiRC@red-moon \
    --to=lpieralisi@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=jic23@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=radu@rendec.net \
    --cc=rafael.j.wysocki@intel.com \
    --cc=sascha.bischoff@arm.com \
    --cc=sashiko-bot@kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=tglx@kernel.org \
    --cc=timothy.hayes@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox