Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Frank Li <Frank.li@oss.nxp.com>
To: Jelly Jia <Jelly.Jia@cixtech.com>
Cc: vkoul@kernel.org, robh@kernel.org, krzk+dt@kernel.org,
	conor+dt@kernel.org, robin.murphy@arm.com,
	devicetree@vger.kernel.org, Frank.Li@kernel.org,
	cix-kernel-upstream@cixtech.com, dmaengine@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 4/5] dmaengine: arm-dma350: Support integration clocks and resets
Date: Wed, 4 Nov 2026 13:37:39 -0600	[thread overview]
Message-ID: <auuJg0QladV4nRIA@SMW015318> (raw)
In-Reply-To: <20261104124411.296640-5-Jelly.Jia@cixtech.com>

On Wed, Nov 04, 2026 at 08:44:10PM +0800, Jelly Jia wrote:
> DMA-350 integrations may gate the controller with a clock or hold it in
> reset. Enable an optional clock and deassert an optional reset before
> accessing the controller registers.
>
> Use the deasserted reset helper rather than requesting a reset pulse.
> This also supports reset controllers that only implement assert and
> deassert operations.
>
> Both resources remain optional, so existing integrations without them
> are unchanged.
>
> Signed-off-by: Jelly Jia <Jelly.Jia@cixtech.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  drivers/dma/arm-dma350.c | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
>
> diff --git a/drivers/dma/arm-dma350.c b/drivers/dma/arm-dma350.c
> index cfe3bacfab68..2f22f8a0ab47 100644
> --- a/drivers/dma/arm-dma350.c
> +++ b/drivers/dma/arm-dma350.c
> @@ -4,6 +4,7 @@
>
>  #include <linux/bitfield.h>
>  #include <linux/bitops.h>
> +#include <linux/clk.h>
>  #include <linux/dmaengine.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/dmapool.h>
> @@ -14,6 +15,7 @@
>  #include <linux/module.h>
>  #include <linux/overflow.h>
>  #include <linux/platform_device.h>
> +#include <linux/reset.h>
>  #include <linux/scatterlist.h>
>  #include <linux/slab.h>
>
> @@ -1247,12 +1249,24 @@ static void d350_free_chan_resources(struct dma_chan *chan)
>  static int d350_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> +	struct reset_control *reset;
> +	struct clk *clk;
>  	struct d350 *dmac;
>  	void __iomem *base;
>  	u32 reg;
>  	int ret, nchan, dw, aw, r, p;
>  	bool coherent, memset;
>
> +	clk = devm_clk_get_optional_enabled(dev, NULL);
> +	if (IS_ERR(clk))
> +		return dev_err_probe(dev, PTR_ERR(clk),
> +				     "failed to enable clock\n");
> +
> +	reset = devm_reset_control_get_optional_exclusive_deasserted(dev, NULL);
> +	if (IS_ERR(reset))
> +		return dev_err_probe(dev, PTR_ERR(reset),
> +				     "failed to deassert reset\n");
> +
>  	base = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(base))
>  		return PTR_ERR(base);
> --
> 2.54.0
>


  reply	other threads:[~2026-11-04 19:38 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 12:44 [PATCH v5 0/5] dmaengine: arm-dma350: Add slave support and Sky1 integration Jelly Jia
2026-11-04 12:44 ` [PATCH v5 1/5] dmaengine: arm-dma350: Fix source trigger bit Jelly Jia
2026-11-04 12:44 ` [PATCH v5 2/5] dmaengine: arm-dma350: Add slave and cyclic transfer support Jelly Jia
2026-11-04 12:44 ` [PATCH v5 3/5] dt-bindings: dma: arm,dma-350: Document optional clocks and resets Jelly Jia
2026-11-04 19:34   ` Frank Li
2026-11-05  8:42     ` Jelly Jia
2026-11-04 12:44 ` [PATCH v5 4/5] dmaengine: arm-dma350: Support integration " Jelly Jia
2026-11-04 19:37   ` Frank Li [this message]
2026-11-04 12:44 ` [PATCH v5 5/5] arm64: dts: cix: Describe the Sky1 FCH DMA-350 integration Jelly Jia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=auuJg0QladV4nRIA@SMW015318 \
    --to=frank.li@oss.nxp.com \
    --cc=Frank.Li@kernel.org \
    --cc=Jelly.Jia@cixtech.com \
    --cc=cix-kernel-upstream@cixtech.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmaengine@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox