From: Frank Li <Frank.li@oss.nxp.com>
To: Nas Chung <nas.chung@chipsnmedia.com>
Cc: mchehab@kernel.org, hverkuil@kernel.org, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org, Frank.Li@nxp.com,
s.hauer@pengutronix.de, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org,
festevam@gmail.com, kernel@pengutronix.de,
nicolas.dufresne@collabora.com, ming.qian@oss.nxp.com,
marek.vasut@mailbox.org, jackson.lee@chipsnmedia.com,
lafley.kim@chipsnmedia.com
Subject: Re: [PATCH v8 02/11] media: chips-media: wave6: Add Wave6 control driver
Date: Thu, 19 Nov 2026 14:07:55 -0600 [thread overview]
Message-ID: <av9XG97eKQ1gZCFb@SMW015318> (raw)
In-Reply-To: <6b00047b748267a2ff4e18ccbfd573ea92166d34.1795075580.git.nas.chung@chipsnmedia.com>
On Thu, Nov 19, 2026 at 05:59:56PM +0900, Nas Chung wrote:
> Add the control driver for the Chips&Media Wave6 video codec IP.
>
> The hardware contains one control register region and four interface
> register regions for a shared video processing engine.
>
> This driver handles the control region and manages shared resources such
> as firmware loading, firmware memory allocation, and coordination required
> by the interface register regions.
>
> It also instantiates and coordinates with the `wave6-core` child devices
> for firmware and power state management.
>
> Tested-by: Ming Qian <ming.qian@oss.nxp.com>
> Tested-by: Marek Vasut <marek.vasut@mailbox.org>
> Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
> ---
...
> +
> +static inline int wave6_vdi_alloc_dma(struct device *dev, struct vpu_buf *vb)
> +{
> + void *vaddr;
> + dma_addr_t daddr;
Nit try keep revise christmas order, check others
dma_addr_t daddr;
void *vaddr;
> +
> + if (!vb || !vb->size)
> + return -EINVAL;
> +
> + vaddr = dma_alloc_coherent(dev, vb->size, &daddr, GFP_KERNEL);
> + if (!vaddr)
> + return -ENOMEM;
> +
> + vb->vaddr = vaddr;
> + vb->daddr = daddr;
> + vb->dev = dev;
> +
> + return 0;
> +}
> +
...
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/clk.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/property.h>
> +#include <linux/of_irq.h>
> +#include <linux/firmware.h>
> +#include <linux/interrupt.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pm_domain.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/iopoll.h>
> +#include <linux/genalloc.h>
order by alpabet.
> +
> +#include "wave6-vpuconfig.h"
> +#include "wave6-regdefine.h"
> +#include "wave6-vpu.h"
> +
> +static const struct wave6_vpu_resource wave633c_data = {
> + .fw_name = "cnm/wave633c_imx9_codec_fw.bin",
> + /* For HEVC, AVC, 4096x4096, 8bit */
> + .sram_size = 0x14800,
> +};
> +
...
> +
> +static u32 wave6_vpu_get_code_buf_size(struct wave6_vpu_device *vpu)
> +{
> + return min_t(u32, vpu->code_buf.size, W6_MAX_CODE_BUF_SIZE);
now use min()
> +}
> +
...
> +
> +static int wave6_vpu_probe(struct platform_device *pdev)
> +{
> + struct device_node *np;
> + struct wave6_vpu_device *vpu;
> + const struct wave6_vpu_resource *res;
> + int ret;
> +
> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret < 0) {
> + dev_err(&pdev->dev, "failed to set DMA mask: %d\n", ret);
> + return ret;
> + }
Needn't check when mask > 32, if check,
return dev_err_probe()
> +
> + res = device_get_match_data(&pdev->dev);
> + if (!res)
> + return -ENODEV;
> +
...
> +
> + wave6_vpu_allocate_work_buffers(vpu);
> +
> + pm_runtime_enable(&pdev->dev);
devm_pm_runtime_enable();
you have not enable clock here, so you need select PM at Kconfig, otherwise
if !CONFIG_PM, other register access will be hang because stub do nothing
of runtime pm when !CONFIG_PM
> +
> + init_completion(&vpu->fw_done);
> + ret = firmware_request_nowait_nowarn(THIS_MODULE,
> + vpu->res->fw_name,
> + &pdev->dev,
> + GFP_KERNEL,
> + vpu,
> + wave6_vpu_load_firmware);
> + if (ret) {
> + dev_err(&pdev->dev, "request firmware fail, ret = %d\n", ret);
> + goto error;
> + }
> +
> + return 0;
> +
> +error:
> + wave6_vpu_release(vpu);
> + pm_runtime_disable(&pdev->dev);
> +error_detach_pm_domains:
> + wave6_vpu_detach_pm_domains(vpu);
use devm_add_action_or_reset() to avoid goto in probe()
> +
> + return ret;
> +}
> +
...
> +
> +module_platform_driver(wave6_vpu_driver);
> +MODULE_DESCRIPTION("chips&media Wave6 VPU driver");
> +MODULE_AUTHOR("CHIPS&MEDIA INC");
> +MODULE_FIRMWARE("cnm/wave633c_imx9_codec_fw.bin");
> +MODULE_LICENSE("Dual BSD/GPL");
> diff --git a/drivers/media/platform/chips-media/wave6/wave6-vpu.h b/drivers/media/platform/chips-media/wave6/wave6-vpu.h
> new file mode 100644
> index 000000000000..96d67e931e71
> --- /dev/null
> +++ b/drivers/media/platform/chips-media/wave6/wave6-vpu.h
> @@ -0,0 +1,137 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */
> +/*
> + * Wave6 series multi-standard codec IP - wave6 driver
> + *
> + * Copyright (C) 2026 CHIPS&MEDIA INC
> + */
> +
> +#ifndef __WAVE6_VPU_H__
> +#define __WAVE6_VPU_H__
> +
> +#include <linux/completion.h>
> +#include <linux/device.h>
> +
> +#include "wave6-vpuconfig.h"
> +#include "wave6-vdi.h"
> +
> +#define WAVE6_VPU_PLATFORM_DRIVER_NAME "wave6-vpu"
> +#define WAVE6_VPU_CORE_PLATFORM_DRIVER_NAME "wave6-vpu-core"
If only use once, needn't define macro.
> +
> +struct wave6_vpu_device;
> +
> +/**
> + * enum wave6_vpu_state - VPU states
> + * @WAVE6_VPU_STATE_OFF: VPU is powered off
> + * @WAVE6_VPU_STATE_PREPARE: VPU is booting
> + * @WAVE6_VPU_STATE_ON: VPU is running
> + * @WAVE6_VPU_STATE_SLEEP: VPU is in a sleep mode
> + */
...
> +
> +#define W6_VPU_MAX_NUM_CORE 4
> +#define MAX_NUM_INSTANCE 32
> +
> +#define W6_VPU_POLL_DELAY_US 10
> +#define W6_VPU_POLL_TIMEOUT 300000
Need unit surfix
Frank
> +
> +#define W6_MAX_REMAP_PAGE_SIZE (1024 * 1024)
> +#define W6_MAX_CODE_BUF_SIZE (4 * 1024 * 1024)
> +#define W6_CODE_BUF_SIZE (1 * 1024 * 1024)
> +#define W6_EXTRA_CODE_BUF_SIZE (256 * 1024)
> +#define W637DEC_WORKBUF_SIZE_FOR_CQ (3 * 512 * 1024)
> +
> +static inline bool wave6_is_product_w_series(u32 code)
> +{
> + return code == WAVE617_CODE || code == WAVE627_CODE ||
> + code == WAVE633_CODE || code == WAVE637_CODE ||
> + code == WAVE663_CODE || code == WAVE677_CODE;
> +}
> +
> +#endif /* __WAVE6_VPUCONFIG_H__ */
> --
> 2.41.0.windows.3
>
>
next prev parent reply other threads:[~2026-11-19 20:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 8:59 [PATCH v8 00/11] Add support for Wave6 video codec driver Nas Chung
2026-11-19 8:59 ` [PATCH v8 01/11] dt-bindings: media: nxp: Add Wave6 video codec device Nas Chung
2026-11-19 8:59 ` [PATCH v8 02/11] media: chips-media: wave6: Add Wave6 control driver Nas Chung
2026-11-19 20:07 ` Frank Li [this message]
2026-11-19 8:59 ` [PATCH v8 03/11] media: chips-media: wave6: Add Wave6 core driver Nas Chung
2026-11-19 20:27 ` Frank Li
2026-11-19 8:59 ` [PATCH v8 04/11] media: chips-media: wave6: Add Wave6 decoder firmware interface Nas Chung
2026-11-19 20:37 ` Frank Li
2026-11-19 8:59 ` [PATCH v8 05/11] media: chips-media: wave6: Add Wave6 m2m decoder Nas Chung
2026-11-19 9:00 ` [PATCH v8 06/11] media: chips-media: wave6: Add Wave6 encoder firmware interface Nas Chung
2026-11-19 9:00 ` [PATCH v8 07/11] media: chips-media: wave6: Add Wave6 m2m encoder Nas Chung
2026-11-19 9:00 ` [PATCH v8 08/11] media: chips-media: wave6: Add trace and debugfs Nas Chung
2026-11-19 9:00 ` [PATCH v8 09/11] media: chips-media: wave6: Add performance profiling Nas Chung
2026-11-19 9:00 ` [PATCH v8 10/11] media: chips-media: wave6: Add Wave6 thermal cooling device Nas Chung
2026-11-19 9:00 ` [PATCH v8 11/11] arm64: dts: freescale: imx95: Add video codec node Nas Chung
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=av9XG97eKQ1gZCFb@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=hverkuil@kernel.org \
--cc=imx@lists.linux.dev \
--cc=jackson.lee@chipsnmedia.com \
--cc=kernel@pengutronix.de \
--cc=krzk+dt@kernel.org \
--cc=lafley.kim@chipsnmedia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=marek.vasut@mailbox.org \
--cc=mchehab@kernel.org \
--cc=ming.qian@oss.nxp.com \
--cc=nas.chung@chipsnmedia.com \
--cc=nicolas.dufresne@collabora.com \
--cc=robh@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox