Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Vishal Sagar <vishal.sagar@amd.com>,
	laurent.pinchart@ideasonboard.com, vkoul@kernel.org
Cc: michal.simek@amd.com, dmaengine@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, varunkumar.allagadapa@amd.com
Subject: Re: [PATCH v2 1/2] dmaengine: xilinx: dpdma: Fix race condition in vsync IRQ
Date: Tue, 12 Mar 2024 10:33:32 +0200	[thread overview]
Message-ID: <b08c99fe-c221-4eb8-9b1a-1420cb5c32f3@ideasonboard.com> (raw)
In-Reply-To: <20240228042124.3074044-2-vishal.sagar@amd.com>

Hi,

On 28/02/2024 06:21, Vishal Sagar wrote:
> From: Neel Gandhi <neel.gandhi@xilinx.com>
> 
> The vchan_next_desc() function, called from
> xilinx_dpdma_chan_queue_transfer(), must be called with
> virt_dma_chan.lock held. This isn't correctly handled in all code paths,
> resulting in a race condition between the .device_issue_pending()
> handler and the IRQ handler which causes DMA to randomly stop. Fix it by
> taking the lock around xilinx_dpdma_chan_queue_transfer() calls that are
> missing it.
> 
> Signed-off-by: Neel Gandhi <neel.gandhi@amd.com>
> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> Signed-off-by: Vishal Sagar <vishal.sagar@amd.com>
> 
> Link: https://lore.kernel.org/all/20220122121407.11467-1-neel.gandhi@xilinx.com
> ---
>   drivers/dma/xilinx/xilinx_dpdma.c | 10 ++++++++--
>   1 file changed, 8 insertions(+), 2 deletions(-)

This fixes a lockdep warning:

WARNING: CPU: 1 PID: 466 at drivers/dma/xilinx/xilinx_dpdma.c:834

Afaics, this issue has been around since the initial commit, in v5.10, 
and the fix applies on top of v5.10. I have tested this on v6.2, which 
is where the DP support was added to the board I have.

So I think you can add:

Fixes: 7cbb0c63de3f ("dmaengine: xilinx: dpdma: Add the Xilinx 
DisplayPort DMA engine driver")

  Tomi

> diff --git a/drivers/dma/xilinx/xilinx_dpdma.c b/drivers/dma/xilinx/xilinx_dpdma.c
> index b82815e64d24..28d9af8f00f0 100644
> --- a/drivers/dma/xilinx/xilinx_dpdma.c
> +++ b/drivers/dma/xilinx/xilinx_dpdma.c
> @@ -1097,12 +1097,14 @@ static void xilinx_dpdma_chan_vsync_irq(struct  xilinx_dpdma_chan *chan)
>   	 * Complete the active descriptor, if any, promote the pending
>   	 * descriptor to active, and queue the next transfer, if any.
>   	 */
> +	spin_lock(&chan->vchan.lock);
>   	if (chan->desc.active)
>   		vchan_cookie_complete(&chan->desc.active->vdesc);
>   	chan->desc.active = pending;
>   	chan->desc.pending = NULL;
>   
>   	xilinx_dpdma_chan_queue_transfer(chan);
> +	spin_unlock(&chan->vchan.lock);
>   
>   out:
>   	spin_unlock_irqrestore(&chan->lock, flags);
> @@ -1264,10 +1266,12 @@ static void xilinx_dpdma_issue_pending(struct dma_chan *dchan)
>   	struct xilinx_dpdma_chan *chan = to_xilinx_chan(dchan);
>   	unsigned long flags;
>   
> -	spin_lock_irqsave(&chan->vchan.lock, flags);
> +	spin_lock_irqsave(&chan->lock, flags);
> +	spin_lock(&chan->vchan.lock);
>   	if (vchan_issue_pending(&chan->vchan))
>   		xilinx_dpdma_chan_queue_transfer(chan);
> -	spin_unlock_irqrestore(&chan->vchan.lock, flags);
> +	spin_unlock(&chan->vchan.lock);
> +	spin_unlock_irqrestore(&chan->lock, flags);
>   }
>   
>   static int xilinx_dpdma_config(struct dma_chan *dchan,
> @@ -1495,7 +1499,9 @@ static void xilinx_dpdma_chan_err_task(struct tasklet_struct *t)
>   		    XILINX_DPDMA_EINTR_CHAN_ERR_MASK << chan->id);
>   
>   	spin_lock_irqsave(&chan->lock, flags);
> +	spin_lock(&chan->vchan.lock);
>   	xilinx_dpdma_chan_queue_transfer(chan);
> +	spin_unlock(&chan->vchan.lock);
>   	spin_unlock_irqrestore(&chan->lock, flags);
>   }
>   


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-03-12  8:34 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-28  4:21 [PATCH v2 0/2] Xilinx DPDMA fixes and cyclic dma mode support Vishal Sagar
2024-02-28  4:21 ` [PATCH v2 1/2] dmaengine: xilinx: dpdma: Fix race condition in vsync IRQ Vishal Sagar
2024-03-12  8:33   ` Tomi Valkeinen [this message]
2024-03-12 15:56     ` Sagar, Vishal
2024-03-12 17:46   ` Sean Anderson
2024-03-27 12:32   ` Tomi Valkeinen
2024-02-28  4:21 ` [PATCH v2 2/2] dmaengine: xilinx: dpdma: Add support for cyclic dma mode Vishal Sagar
2024-03-13  7:19   ` Tomi Valkeinen
2024-03-27 12:53   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b08c99fe-c221-4eb8-9b1a-1420cb5c32f3@ideasonboard.com \
    --to=tomi.valkeinen@ideasonboard.com \
    --cc=dmaengine@vger.kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michal.simek@amd.com \
    --cc=varunkumar.allagadapa@amd.com \
    --cc=vishal.sagar@amd.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox