Re: [PATCH] usb: mtu3: Fix double dereference in TP_printk

[Vladimir Murzin <vladimir.murzin@arm.com>]

Hi All,

On 9/28/26 19:21, Paul E. McKenney wrote:
> On Mon, Sep 28, 2026 at 02:11:42PM +0100, Vladimir Murzin wrote:
>> Hi All,
>>
>> Gentle ping... spat is still present in v7.3-rc5
> If no one else wants to push it, I can do so.  I gotta admit that the
> resulting test failures when I forget to apply it are a bit annoying.  ;-)
> 
> 							Thanx, Paul
> 

FYI, splat is still present in v7.3-rc6 :(

Thanks
Vladimir

>> Cheers
>> Vladimir
>>
>> On 9/22/26 11:37, Vladimir Murzin wrote:
>>> Paul reported kernel splat:
>>>
>>> [    0.000000] TRACE EVENT ERROR: Event mtu3_gadget_ep_set_halt has double dereference in TP_printk: &REC->gpd_ring->dma
>>> [    0.000000] ------------[ cut here ]------------
>>> [    0.000000] Event mtu3_gadget_ep_set_halt has double dereference in TP_printk: &REC->gpd_ring->dma
>>> [    0.000000] WARNING: kernel/trace/trace_events.c:420 at test_double_dereference+0x144/0x14c, CPU#0: swapper/0/0
>>> [    0.000000] Modules linked in:
>>> [    0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.3.0-rc1 #15247 PREEMPT
>>> [    0.000000] Hardware name: linux,dummy-virt (DT)
>>> [    0.000000] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
>>> [    0.000000] pc : test_double_dereference+0x144/0x14c
>>> [    0.000000] lr : test_double_dereference+0x144/0x14c
>>> [    0.000000] sp : ffffc80aa7633bf0
>>> [    0.000000] x29: ffffc80aa7633bf0 x28: ffffc80aa7c0f047 x27: 000508b58019388f
>>> [    0.000000] x26: 0000000000000003 x25: 0000000000000007 x24: ffffc80aa5fceff8
>>> [    0.000000] x23: ffffc80aa7c0f05a x22: ffffc80aa64edfe8 x21: ffffc80aa7c0fce8
>>> [    0.000000] x20: ffffc80aa7c0f047 x19: 0000000000000013 x18: 0000000000000001
>>> [    0.000000] x17: 6572656420656c62 x16: 756f642073616820 x15: 746c61685f746573
>>> [    0.000000] x14: 0000000000000000 x13: ffff000139d90000 x12: 0000000000000045
>>> [    0.000000] x11: 00000000000000cf x10: ffff00013f546428 x9 : ffff000139d90000
>>> [    0.000000] x8 : 3fffffffffffc000 x7 : 0000000000000001 x6 : 0000000000000001
>>> [    0.000000] x5 : ffff00013f4e6440 x4 : 0000000000000000 x3 : 0000000000000000
>>> [    0.000000] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffc80aa764a700
>>> [    0.000000] Call trace:
>>> [    0.000000]  test_double_dereference+0x144/0x14c (P)
>>> [    0.000000]  trace_event_raw_init+0x37c/0x5d8
>>> [    0.000000]  event_init+0x34/0xc0
>>> [    0.000000]  trace_event_init+0xec/0x588
>>> [    0.000000]  trace_init+0x24/0x6e0
>>> [    0.000000]  start_kernel+0x4a0/0x8ec
>>> [    0.000000]  __primary_switched+0x88/0x90
>>> [    0.000000] irq event stamp: 0
>>> [    0.000000] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
>>> [    0.000000] hardirqs last disabled at (0): [<0000000000000000>] 0x0
>>> [    0.000000] softirqs last  enabled at (0): [<0000000000000000>] 0x0
>>> [    0.000000] softirqs last disabled at (0): [<0000000000000000>] 0x0
>>> [    0.000000] ---[ end trace 0000000000000000 ]---
>>> [    0.000000] TRACE EVENT ERROR: Event mtu3_gadget_ep_disable has double dereference in TP_printk: &REC->gpd_ring->dma
>>> [    0.000000] TRACE EVENT ERROR: Event mtu3_gadget_ep_enable has double dereference in TP_printk: &REC->gpd_ring->dma
>>>
>>> Which also observed by Mark and myself.
>>>
>>> The splat it result of new check introduced by b5cc230af5e5 ("tracing:
>>> Warn when an event dereferences a pointer in TP_printk()") which
>>> correctly catches issue with %pad dereferencing the address saved in
>>> the ring buffer. TP_fast_assign() logic gets executed when the
>>> tracepoint is triggered, however the TP_printk() is executed when the
>>> user reads the trace buffer which could be seconds, minutes, hours,
>>> days, even months later and nothing guarantee that __entry->gpd_ring
>>> pointer will still be pointing to what it was when it was recorded.
>>>
>>> Fix the issue by capturing immediate value of gpd_ring.dma when trace
>>> point is triggered.
>>>
>>> Reported-by: Paul E. McKenney <paulmck@kernel.org>
>>> Tested-by: Mark Rutland <mark.rutland@arm.com>
>>> Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
>>> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
>>> ---
>>>  drivers/usb/mtu3/mtu3_trace.h | 4 +++-
>>>  1 file changed, 3 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/usb/mtu3/mtu3_trace.h b/drivers/usb/mtu3/mtu3_trace.h
>>> index 89870175d635..9aaa167d69c1 100644
>>> --- a/drivers/usb/mtu3/mtu3_trace.h
>>> +++ b/drivers/usb/mtu3/mtu3_trace.h
>>> @@ -224,6 +224,7 @@ DECLARE_EVENT_CLASS(mtu3_log_ep,
>>>  		__field(unsigned int, flags)
>>>  		__field(unsigned int, direction)
>>>  		__field(struct mtu3_gpd_ring *, gpd_ring)
>>> +		__field(dma_addr_t, gpd_ring_dma)
>>>  	),
>>>  	TP_fast_assign(
>>>  		__assign_str(name);
>>> @@ -235,12 +236,13 @@ DECLARE_EVENT_CLASS(mtu3_log_ep,
>>>  		__entry->flags = mep->flags;
>>>  		__entry->direction = mep->is_in;
>>>  		__entry->gpd_ring = &mep->gpd_ring;
>>> +		__entry->gpd_ring_dma = mep->gpd_ring.dma
>>>  	),
>>>  	TP_printk("%s: type %s maxp %d slot %d mult %d burst %d ring %p/%pad flags %c:%c%c%c:%c",
>>>  		__get_str(name), usb_ep_type_string(__entry->type),
>>>  		__entry->maxp, __entry->slot,
>>>  		__entry->mult, __entry->maxburst,
>>> -		__entry->gpd_ring, &__entry->gpd_ring->dma,
>>> +		__entry->gpd_ring, &__entry->gpd_ring_dma,
>>>  		__entry->flags & MTU3_EP_ENABLED ? 'E' : 'e',
>>>  		__entry->flags & MTU3_EP_STALL ? 'S' : 's',
>>>  		__entry->flags & MTU3_EP_WEDGE ? 'W' : 'w',
>>> -- 2.34.1
>>>